Rubber Mastic And Sealant Tapes

BUTYL MASTIC TAPE-INDUSTRIAL SEALANT

Outstanding Properties
Butyl mastic is a highly viscous industrial sealant. As a tape, The outstanding properties that Butyl mastic sealant offers are:
butyl sealants adhere to most materials creating a watertight • Sealant with adhesive properties
bond. The butyl sealant tape is applied by hand directly from • Service temperature ranges from – 40°C to + 90°C
the roll onto clean, dry, grease-free surfaces. The butyl mastic • Non-hardening, permanently elastic
strip is supplied on a roll with a silicone release paper for easy • Excellent joint movement
application and storage; and roll lengths can be converted to • Extremely durable
your requirements subject to minimum quantities. • No fumes, solvent free
• Includes a silicone release paper
Many Applications
Black mastic sealant tape, butyl mastic sealant, mastic caulk, mastic putty and hot melt mastic can be used for many
applications and in many industries, such as :

• Electrical and Cable Jointing Sealant

• Water and Pond Liner Sealant, Underlayments
• Roofing and Cladding Sealant
• Caravans, Motor Homes and Holiday Homes Sealant
• Automotive Weather-Strip, Glass Trim and Membrane Liners Sealant
• Ducting Sealant, HVAC Duct Sealer
Butyl Qualities
Butyl qualities generally differ in:
• Density
• Compressive strength
• Tensile strength
• Peel strength
• Shore hardness 00 and/or penetration
• Tack
• Inner tensile strength
• Specific material properties such as:
• Surfactant resistance
• Chemical resistance
• Melting properties

Butyl Tapes For Electrical and Cable Jointing Sealant

 Stress Control Mastic

Stress control mastic provide stress relief of the electrical field in all MV cables joints and terminations for power
cable applications. The stress control mastic with excellent stress controlling and self-sticking properties make it
widely use in heat shrink and cold shrink technologies. Stress control mastic equilibrate the electrical field and
reduce the electrical stress. Stress control mastic resistant to water and humidity, filling voids and irregular
shapes.

Applications:

Stress control mastic provide stress relief of the electrical field in all MV cables joints and terminations for power
cable applications. The stress control mastic with excellent stress controlling and self-sticking properties make it
widely use in heat shrink and cold shrink technologies. Stress control mastic equilibrate the electrical field and
reduce the electrical stress. Stress control mastic resistant to water and humidity, filling voids and irregular
shapes.
 Properties Stress Grading Mastic
Physical Properties
Colour Brown
Size
Width 25 mm
Thickness 2.5 mm
Length As per requirement
Needle Penetration 25 unit (min)
Softening point 125· (min)
Low Temp. Flexibility
No Crack
(4 hr at –20°C)
Physical Form In roll form with release paper on both sides
Mechanical Properties
1) Shear Strength 3 N / cm2 (min)
2) Elongation / Stretch test 75% width reduced without breakage
3) Peel strength in PE 10N / 25 mm (min)
Electrical Properties
1) Volume resistivity 1 x 10 9 ohm cm (min)
2) Dielectric const at 50 HZ, 500 V 18.0 (min)
3) Electric Strength 8 MV/m (min)
Corrosion Resistance
168 hr at 90°C on Al conductor No Chemical interaction / corrosion
Anti-Tracking Mastic
Used to filling the spacing between cable cores for insulation , sealing and waterproof performances. Suitable for used in 11KV,
25KV and 36KV joints and terminations .
Anti-tracking mastic provide sealing and anti-tracking for power cable termination and joints for heat shrink and cold shrink
technology.
Also used to bonding and sealing for connectors of electrical equipment and heat shrink mould parts.
Anti-Tracking Mastic
Applications:
Used to filling the spacing between cable cores for insulation , sealing and waterproof performances. Suitable for used in
11KV, 25KV and 36KV joints and terminations
To provide sealing and anti-tracking for power cable termination and joints for heat shrink and cold shrink technology.
Also used to bonding and sealing for connectors of electrical equipment and heat shrink mould parts.

Anti-Tracking Mastic
Features:
 Excellent sealing and waterproof properties
 Anti-tracking
 Anti-aging
 Excellent self-sticking
 Standard color : Red
Properties Red Mastic Tape
Physical Properties
Colour Red
Size
Width 25 + 5 mm
Thickness 1.0 (min) mm
Length As per requirement
Needle Penetration 50 – 100 unit
Softening point 100°C (min)
Low Temp. Flexibility
No. Crack
(4 hr at –20°C)
Physical Form In roll form with release paper on both sides
Mechanical Properties
1) Shear Strength 3 N / sq. cm2
2) Elongation / Stretch test Min elongation 100%
3) Peel strength in PE 10N / 25 mm (min)
Electrical Properties
1) Volume resistivity 1 x 10 12 ohm cm (min)
2) Dielectric const at 50 HZ, 500 V -
3) Electric Strength -
Corrosion Resistance
168 hr at 90°C on Al conductor No chemical interaction / corrosion.
 Void Filling Mastic

Used to filling the cable cores for insulation , sealing and waterproof performances.
Suitable for used in 11KV, 25KV and 36KV joints and terminations.

Void Filling Mastic

Applications:
Used to filling the cable cores for insulation , sealing and waterproof performances.
Suitable for used in 11KV, 25KV and 36KV joints and terminations.
 TECHNICAL CHARACTERISTICS

SL.NO. PROPERTIES TEST METHOD UNIT SPECIFID

1 Softening point ASTM E-28 °C 100 min.

2 Water absorption R.T. for 24 hrs. % 0.5% max.

3 Volume resistivity ASTM D 1373 Ohm-cm 1x1010 min.

4 Shear strength N/cm² 2 min.

5 Needle penetration ASTM D-5 Unit/10sec 70 to 130

6 Density G/cc 1.5 to 1.65

7 Brittleness temperature ASTM D 2137 °C -30 min

 Butyl Mastic Tape Telecommunication
Weatherproofing Kit for Connectors
and Antennas

The unique waterproof tape for telecommunication, it consists of Application

Butyl Rubber, with performance of adhesion, shape and super  Antenna Connetction Waterproof.
waterproof, it is also resistant to corrosion for Copper and various  RRU Connection Waterproof.
cable sheathing materials. The tape is suitable for water seal with  Earth Wire connection Waterproof.
all kinds of telecommunication [equipment] and cable connectors  Macro station and special application
rated at 90℃ with an emergency overload rating of 130℃.
 Properties
No. Performance Typical Vulue Test Method

1 Tensile Strength 1.10 MPa ASTM D 4325

2 Elongation at Break 900% ASTM D 4325

3 Dielectric Strength 3.2 ASTM D 4325

4 Adhesion 25N/50mm ASTM D 1000

5 Dielectric Consumption 2% ASTM D 4325

6 Continuous Working Temperature 90℃ ASTM D 4388

7 Emergency Overload Temperature 130℃ ASTM D 4388

8 Water Absorption ＜0.1g/(100 inch .24h) ASTM D 3833

9 Ozone Resistance Pass ASTM D 4388

10 Heat Exposure Pass at 130℃ ASTM D 4388

 We are the manufacture for the preformed butyl tape, an integral part of an industrial roofing system. In a built-up
roof, double-sided butyl is used on the end laps of the liner panel and a single faced Polyband strip along the side laps. The
top sheet, or weather sheet, is sealed along the end laps and side laps with a double-sided butyl tape. Composite panel roofs
are sealed with a double-sided butyl tape along both end laps and side laps. Foam fillers at the ridge and eaves are fixed in
place with a thinner tape and this is also used in the production of rooflights. Butyl tape has further applications around
rooflights, gutters and flashings. Some wall cladding designs also call for butyl tape to be applied along the side laps. Roof and
wall membranes are also sealed with double-sided butyl.

Centroid Polymer Technologies BUTYLTAPE was designed specifically for the metal building industry to provide
optimal sealing in the harshest environments. It adheres to most clean, dry metal surfaces and does not harden, bleed or
stain. With pressure, it fills minor irregularities in the surface and 9eals the joints providing an effective barrier agalnst water,
moisture, dust, and dirt
 Butyl Based Sound Dampening Anti Vibration Pads
We offer Butyl Based Sound Dampening Anti
Vibration Pads. Apart from being strong adhesive tapes, butyl
rubber is most effective in drowning out sounds and vibrations.
It has an excellent noise and vibration dampener. Owing to this
property all major Automobile companies, Refrigeration & Air
conditioners manufacturers worldwide are using butyl pads for
vibration & noise reduction. We produce butyl anti vibration
pads in various sizes & thickness as per the specific
requirement of our customers.

Our sound dampeners provide the Millennium

technology for noise reduction in Automobile, Air-conditioners Features:
and Gensets. These combine the versatility of flexibility and  Fine finish
ease of application with efficient damping power. They exhibit  Tear resistance
excellent tack, chemical resistance and weathering resistance.  Durability
Self-fusing Silicone Tape

Silicone tapes are produced from specially formulated silicone rubber. They bond irreversibly to provide an insulative barrier
that is resistant to moisture, oxygen, ozone and corona over a wide temperature range (-65°F up to +500°F). Our products
provide superior electrical insulation with a dielectric strength of 300 VPM minimum at 356°F/180°C.
 Material Resistivity
Molten metal splash = Excellent
Direct flame = Excellent
High temperatures = Excellent
Oil resistance = Very good*
Water resistance = Very good*
Hydraulic fluid resistance = Very good*
Fuel resistance = Very good*
Wear resistance = Very good
UV resistance = Very good

TYPICAL PROPERTIES
Thermal Stability ....................................356°F/180°C
Temperature Range ............................-65°F to +500°F (-54°C to +260°C) Volume Resistivity.................................. 1013 ohm-cm
min. (ASTM D257)
Self Adhesion ............................................2 p.p.i min. (3.5 N/cm) (ASTMD2148) Hardness ........................................................
50±10 Shore A (ASTM D2240) Moisture Absorption ..........................0.9% (46 hrs. in H2O @ 70°F)
 Get in Touch with us
Centroid Polymer Technologies , KINFRA Integrated
Industrial & Textile Park Plot no P32(4),P32(5),
Kanjikode post, Palakkad- 678621, Kerala, India
www.centroidpolymer.com
[email protected]
[email protected]
9946231123
9447159965