Wear-Resistant Steel With Average Hardness of 500 HB
Uploaded by
hdierkeWear-Resistant Steel With Average Hardness of 500 HB
Uploaded by
hdierke24/01/2011 ThyssenKrupp Materials France
XAR 500
Wear-resistant steel
with average hardness of 500 HB
Designation
Weldable, fine grain, wear-resistant structural steel plates.
Chemical composition
in %
C Si Mn P S Cr Mo B
≤ 0,28 ≤ 0,80 ≤ 1,50 ≤ 0,025 ≤ 0,010 ≤ 1,00 ≤ 0,50 ≤ 0,005
Applications
These steels can be used for constructions likely to suffer high wear, for ex. demolition and
landscaping machinery, handling and crushing installations, scrap bailing presses and other crushing
machines.
Mechanical properties
(typical values)
at room temperature, condition as delivered treated
Hardness(1 ) U.T.S.(2 ) Y.S. 0.2%(2 ) Elongation(2 ) KV at - 40 °C (2 )
HB MPa MPa % Joules
450-530 1600 1500 9 25
(1) Unle ss othe rwise a gre e d upon in the orde r, the Brine ll hardne ss shall be de te rm ine d from m othe r
pla te . The hardne ss shall be m e asure d roughly 1 m m be low the surfa ce .
(2) Va lue s give n a s indication only for 15 m m thick ne ss
Size range
available or from European central stock, short delivery time
Format (min. → max.) Thickness (min. → max.)
Product designation
mm mm
Rolled plates, hardened and tempered 1500 x 3000 → 2000 x 6000 4 → 50
All s tatements as to the properties or utilis ation of the materials and products mentioned in the catalogue are for the purpos e
of des cription only. Guarantees in res pect of the exis tence of certain properties or utilis ation of the material and products are
valid only if agreed upon in writing.
XAR 500
thyssenfrance.com/fich_tech_EN.asp?… 1/2
24/01/2011 ThyssenKrupp Materials France
thyssenfrance.com/fich_tech_EN.asp?… 2/2
