Scribd
Upload
26 views14 pages

The University of Western Ontario Faculty of Engineering: Total Mark / 102

Uploaded by

Erik

This document contains the final exam for an engineering statics course given at the University of Western Ontario on April 26, 2005. The 6 question, 102 point exam is worth 30% of the student's final grade. Questions involve determining forces in truss members, drawing shear and bending moment diagrams, calculating required horizontal forces, finding maximum allowable applied forces before slipping occurs, determining a critical water level for a hinged gate to open, and finding the center of mass of a sheet metal bracket. Students are provided graph paper to show work and are only permitted to use an electronic calculator as an external aid.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

The University of Western Ontario Faculty of Engineering: Total Mark / 102

Uploaded by

Erik
26 views14 pages
This document contains the final exam for an engineering statics course given at the University of Western Ontario on April 26, 2005. The 6 question, 102 point exam is worth 30% of the student's final grade. Questions involve determining forces in truss members, drawing shear and bending moment diagrams, calculating required horizontal forces, finding maximum allowable applied forces before slipping occurs, determining a critical water level for a hinged gate to open, and finding the center of mass of a sheet metal bracket. Students are provided graph paper to show work and are only permitted to use an electronic calculator as an external aid.

Original Title

2005 Final

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

This document contains the final exam for an engineering statics course given at the University of Western Ontario on April 26, 2005. The 6 question, 102 point exam is worth 30% of the student's final grade. Questions involve determining forces in truss members, drawing shear and bending moment diagrams, calculating required horizontal forces, finding maximum allowable applied forces before slipping occurs, determining a critical water level for a hinged gate to open, and finding the center of mass of a sheet metal bracket. Students are provided graph paper to show work and are only permitted to use an electronic calculator as an external aid.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
26 views14 pages

The University of Western Ontario Faculty of Engineering: Total Mark / 102

Uploaded by

Erik
This document contains the final exam for an engineering statics course given at the University of Western Ontario on April 26, 2005. The 6 question, 102 point exam is worth 30% of the student's final grade. Questions involve determining forces in truss members, drawing shear and bending moment diagrams, calculating required horizontal forces, finding maximum allowable applied forces before slipping occurs, determining a critical water level for a hinged gate to open, and finding the center of mass of a sheet metal bracket. Students are provided graph paper to show work and are only permitted to use an electronic calculator as an external aid.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 14

THE UNIVERSITY OF WESTERN ONTARIO

FACULTY OF ENGINEERING
DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING

ES022Y – ENGINEERING STATICS


FINAL EXAMINATION

April 26, 2005 (9:00 AM - 12:00 PM)


INSTRUCTORS: M.H. El Naggar/ D. Inculet

Limited Open Book

The only external aid allowed is an electronic calculator.

Notes:

1. There are six questions.


2. Each question is worth 17 marks for a total of 102 Marks.
3. This exam is worth 30% of the final mark for the course.
4. Draw proper free body diagrams as required.
5. Show all steps and calculations clearly.
6. Specify all units with proper prefixes.
7. Give all final answers to 3 significant figures.
8. Answer all questions in the space provided.
9. Indicate if answers are continued on last page provided.
10. Marks will be deducted for poor diagrams and presentation.

Question Mark
1 / 17
2 / 17
3 / 17
4 / 17
5 / 17
6 / 17

Total Mark / 102

Name (print): _______________________________ ID: __________________

Signature: ______________________________ Lecture Section: ______________


ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 1

For the Fink roof truss shown in Figure 1, determine the force in members BD, CD, CE
and DE. State whether each member is in tension or compression.

Figure 1

2
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 1 (cont.)

3
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 2

For the beam shown in Figure 2, draw the shear and bending moment diagrams in terms
of P, and determine the maximum absolute value of the bending moment knowing that
a) P = 14 kN
b) P = 20 kN

Figure 2

4
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 2 (cont.)

5
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 3

The wedge is used to level the member shown in Figure 3. Determine the horizontal
force P that must be applied to move the wedge to the right. The coefficient of static
friction between the wedge and the two surfaces of contact is µ s = 0.25.
Neglect the size and weight of the wedge.

Figure 3

6
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 3 (cont.)

7
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 4

The three flat blocks are positioned on the 30o


incline as shown, and a force P parallel to the
incline is applied to the middle block. The upper
block is prevented from moving by a wire which
attaches it to the fixed support. The coefficient of
static friction for each of the three pairs of surfaces
is shown.

Determine the maximum value P may have


before any slipping takes place.

8
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 4 (cont.)

9
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 5

The hinged gate ABC closes an opening of width b


(perpendicular to the page) in a water channel.
The water has free access to the underside as well as
the right side of the gate. When the water level rises
above a certain value of h, the gate will open.

Neglecting the mass of the gate, determine the


critical value of h for which the gate will open.

10
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 5 (cont.)

11
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 6

The bracket shown is constructed from sheet metal


of uniform thickness.

Determine the coordinates of the centre of mass


of the bracket.

12
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Question 6 (cont.)

13
ES022Y – ENGINEERING STATICS – Final Exam
April 26, 2005 (9:00 am -12:00 pm)

Name (print): _______________________________ ID: __________________

Additional Workspace - Indicate Question #

14

You might also like