Raptor Coupling: Mechanic Al Power TR Ansmission

—
M EC H A N I C A L P OW E R T R A N S M I S S I O N
Raptor coupling
2 R APTOR EL A STOMERIC COUPLING
—
A better choice has arrived
Coupling maintenance and reliability should not monopolize your

maintenance team. The Dodge® Raptor elastomeric coupling eliminates
these concerns.
The Raptor’s easy to assemble, patented split natural rubber element

significantly decreases total costs of ownership and extends driven
equipment life. Built for drop-in interchangeability, the Raptor features
an innovative design offering easier installation, reduced maintenance,
and improved reliability in a wide range of new and existing applications.
*Not actual size

3
—
Elastomeric coupling innovation
Longer driven
equipment life
Flexible
mounting
options
Patented
WingLock™
element
design
5
Drop-in
interchangeability
Easier
installation
—
Designed and developed at Dodge
Patented WingLock element design
The Dodge Raptor utilizes a patented finite-

element optimized winged elastomeric element
design. This WingLock technology increases
surface area in the most critical regions of the
element, resulting in higher bond strength,
improved fatigue resistance, and longer life versus
competitive designs.
—
01 Pressure at bond Dodge Raptor patented WingLock technology
without WingLock
technology
—
02 Pressure at bond with
WingLock technology
—
03 Average life,
Dodge Raptor versus
competitors.
— —
01 02
—
03
Documented performance
6 Comparative benchmark testing

5.5 confirms the performance
improvements associated with Raptor’s
5
WingLock element design. Even under
4.5
worst-case misalignment and torque
4 conditions, testing results show that
3.5 Raptor lasts six times longer than the
Lifetime
3 closest competitor.
2.5
Results based on accelerated life testing
2
at 1.5x cataloged torque, while subject
1.5 to 4° angular misalignment and 3/16"
1 (4.8mm) parallel misalignment.
0.5
0
Dodge Raptor Competitor 1 Competitor 2
7
Tested tough
Engineers from Dodge’s Advanced Development Laboratory designed and tested the Raptor to perform
under the most extreme conditions. This includes successfully passing the rigorous DIN 740 (reverse cyclic
loading) coupling test standard – not once, not twice, but ten times for a single coupling.
Easy to interchange
Designed to be a drop-in interchange, the Raptor meets or exceeds torque, bore, and speed ratings for
these styles of commonly used couplings. All Raptor components can be used in existing applications
without any modifications. This allows current users of these styles to immediately realize the benefit of
longer driven equipment life and improved reliability by switching to the Raptor.
Coupling size
Dodge Raptor E2 E3 E4 E5 E10 E20 E30 E40 E50 E60 E70 E80 E100 E120 E140
Rexnord Omega E2 E3 E4 E5 E10 E20 E30 E40 E50 E60 E70 E80 E100 E120 E140
TB Wood's Dura-Flex WE2 WE3 WE4 WE5 WE10 WE20 WE30 WE40 WE50 WE60 WE70 WE80 - - -
Industry leading 5-year warranty

With over 100 years of coupling manufacturing experience,
Dodge has a history of providing reliable coupling solutions in
a wide range of industries and applications. Raptor couplings
carry an industry leading 5-year limited warranty, even when
used with competitors’ components.
—
Longer driven equipment life and
improved reliability
Superior natural rubber element

Leveraging over 50 years of Dodge’s natural rubber
expertise, the Raptor features a natural rubber
flexible element that offers a number of
performance benefits when compared to
competitive urethane designs.
• Static conductive for grounding redundancy,

allowing current to safely pass through the
natural rubber element, preventing the possibility
of arcing during operation
• Exceptional resistance to hydrolysis, for improved
performance in humid environments
• Superior thermal conductivity and ability to
dissipate heat and hysteresis build up
— Lower stiffness, longer driven equipment life

01 Connected
equipment L 10 life, Because the Raptor element uses a natural rubber compound, it is significantly more flexible than urethane
Dodge Raptor versus designs. Natural rubber yields an element with approximately 50% lower torsional and bending stiffness,
competition
resulting in longer life for all types of connected driven equipment – including motors, pumps,
compressors and gearboxes.
• Reduced bearing loads yield over 15 times increase in L10 bearing life connected equipment
• Less vibration transmission to connected equipment
• Better shock damping capabilities
18 Results based on tested bending

16 stiffness values applied to a motor and
centrifugal pump arrangement with 4°
14
angular misalignment.
12
L10 Life
10
8
6
4
2
0
—
Dodge Raptor Competition
01
9
Industry leading misalignment capabilities

Over time foundations settle, vibration occurs, and
some level of misalignment may occur. While
competitive urethane couplings can handle pure
angular or parallel misalignment, their capabilities are
greatly diminished in applications with combined
angular and parallel misalignment. Unfortunately for
the competition, combined misalignment is reality.
When an elastomeric coupling is misaligned during

operation, cyclic stresses are created, generating heat
in a phenomenon known as hysteresis. The Raptor’s
natural rubber element has superior heat dissipating
capabilities versus competitive urethane elements.
Additionally, the Raptor has a lower angular stiffness,
allowing it to be more forgiving in misaligned
conditions. These two features combined allow the
Dodge Raptor to offer industry leading misalignment
capabilities.
The Raptor provides accommodation of shaft

misalignment during installation, operation, and
replacement better than competitive urethane
elements.
Attention to every detail

Dodge highly engineered every aspect of the Raptor
for performance, including specification of high-
strength Grade 8 flanged head cap screws. This robust
hardware gives a 40% increase in proof strength
versus competitor’s standard head Grade 5 fasteners.
Serrations under the flanged head and a thread locking
patch help to resist loosening and minimize the
Dodge Grade 8 serrated flanged-head cap
potential for stripping. This attention to detail screw (shown without Nylok patch)
provides a more reliable connection between
elastomeric element and shaft hubs.
Competitor Grade 5 hex-head cap screw

—
Easier installation and reduced
maintenance
Improved features, easier installation

The Dodge Raptor has everything needed for easier
installations and reduced maintenance costs.
• Split element for easy replacement without

moving and re-aligning connected equipment
• Slotted clamp ring holes offer 187% extra
mounting hardware clearance versus
competitor’s circular through holes.
• Approximately 50% lower torsional stiffness
makes the element significantly easier to
manipulate by hand during installation
• Maintenance free non-lubricated natural rubber
element for trouble-free operation
Raptor’s slotted clamp rings offer more clearance at the bolt

holes, for an easier installation than competitive designs.
— Easy as 1-2-3
01
Step 1 Installation for Dodge Raptor couplings are quick and easy. The Raptor’s horizontally split element doesn’t
Install hubs require locking shafts during installation, meaning a faster installation, requiring fewer tools and
—
02 eliminating shaft damage. Simply fasten the shaft hubs, install the element, and tighten the hardware.
Step 2
Set spacing
—
03
Step 3
Install element
— — —
01 02 03
Note: Shaft engagement should be equal to or greater than 80% the hub length-through bore.
11
—
Suited for any application
A practical solution to spacer couplings

The innovation behind the Raptor coupling also
extends to applications requiring additional space
between shaft ends.
• One spacer element fits all standard ANSI and ISO

spacer lengths
• Spacer elements can be replaced with standard
close-coupled elements, resulting in lower
replacement costs and reduced inventory
• Eliminates the need for high-speed rings,
resulting in easier installation, while also
reducing purchase costs and inventory
requirements
Armored elements for extra protection from harsh

environments
Raptor elements are available with an optional
Armored Element. This allows users to benefit from
the increased performance and longer driven
equipment life of standard Raptor elements, while
providing an added layer of protection from ozone,
petroleum oils, and some chemical environments.
Raptor Armored Elements exceed ASTM 1149-07
rubber deterioration standards, as determined
through third-party testing.
Third-party ATEX certified

When it comes to applications in hazardous
II 2 GD c T5 I M2 c
environments, there’s no reason for customers to
assume any risk by using a product which is self- Sira 15 ATEX 6170X
certified. That’s why all Raptor couplings are third- DODGE RAPTOR COUPLINGS
party ATEX certified for worry-free use in MFG by Baldor Electric Company .
hazardous environments. All required product GREENVILLE, SC / FT. SMITH, AR USA
markings and documentation are included with
each coupling at no additional charge. When it
comes to hazardous environments, you can trust
Dodge.
—
Shaft hubs
Flexible mounting options for any application

• Available in a wide range of shaft attachment
methods, including finished bore, Taper-Lock®
and QD bushed options.
• Suited for any application, hubs are reversible to
accommodate a wide range of shaft gaps
• Interchangeable hubs are used for both close- 65O
coupled and spacer designs for reduced inventory
Finished bore
• Setscrew locking mechanism ensures a quick,
easy installation
• Two setscrews at a 65° angle optimizes radial and
torsional holding power, resulting in a 75%
holding power increase versus competitive
designs using one setscrew
Holding Power
as Function of Setscrew Angle
250
(Percent of single setscrew assembly)
200
65°
Holding power
150
100
Competition
50
0
20 40 60 80 100 120 140 160 180
Angle between setscrews
Torsional holding power Radial holding power

13
Taper-Lock bushed
• Reduced maintenance time and costs
• Easy installation and removal
• Minimal shaft damage
• Clean, compact design
• Dodge original design, an industry standard for over
50 years
• Conforms with MPTA-B9i-2013 Taper-Lock bushing
standard
• Combine with Dodge Integral Key bushings for added
value and convenience
QD bushed
• “Quick Detachable” QD bushings for easy installation
and removal
• Reduced maintenance time and costs
• Minimal shaft damage
• Increased bore capacities
• Robust flanged design featuring capscrew hardware
• Conforms with MPTA-B6i-2010 QD bushing standard
—
How to order
A complete Raptor coupling assembly consists of one element (standard
or spacer) and two shaft hubs (finished bore, Taper-Lock, or QD). If
Taper-Lock or QD shaft hubs are selected, bushings must also be
selected for the desired shaft size.
Nomenclature:
Elements:
E 20
Element
E=Standard (close-coupled)
ES=Spacer
Size
Hubs:
20 H SB
Size
Hub
Style
RB=Rough bore
SB=Finished bore (stock)
CB=Finished bore (custom)
CBMM=Custom bore, mill motor
TL=Taper-Lock bushed
QD=QD bushed
15
—
Engineering
Selection methods
Torque method: Hp/100 method:
Step 1: Step 1:
Obtain required S.F. (service factor) from Table 1 on Obtain required S.F. (service factor) from service
pages 16 and 17. factor tables on pages 16 and 17.
Step 2: Step 2:
Determine torque required for application. Determine the application Hp per 100 RPM:
Torque (in. - lbs.) = 63025 x motor Hp x S.F. Hp / 100 RPM = Motor Hp x 100 x S.F.
Coupling RPM Coupling RPM
Step 3: Step 3:
From rating tables, find a rating equal to or greater From rating tables, find a rating equal to or greater
than the torque. Note coupling size from left hand than Hp design. Note to or greater than the Hp/100
column. RPM. Note coupling size from left hand column.
Step 4: Step 4:
Check maximum RPM capability. Check maximum RPM capability.
Step 5: Step 5:
Check maximum bore capacity. If maximum bore is Check maximum bore capacity. If maximum bore is
exceeded, move to larger size with adequate bore. exceeded, move to larger size with adequate bore.
Be sure maximum RPM of coupling is not exceeded. Be sure maximum RPM of coupling is not exceeded.
Notes:
1. If system peak torque is known and is non-
reversing, start at step 3. If system peak torque
is known and reversing, multiply by 2.0 and
start at step 3.
2. If ambient temperature of the application is
above 180°, a high temperature adjustment
must be made to the system service factor. See
page 34 for high temperature adjustment
factors.
3. If spring set motor brake is used, and brake Hp
is greater than prime mover, use brake Hp in
place of motor Hp.
—
Engineering
Service Factor Table 1
Factor ∆ Factor ∆ Factor ∆

Application (read footnotes) Raptor Application (read footnotes) Raptor Application (read footnotes) Raptor
Agitators Dredges Machine tools
Paddle or propeller (vert. or horiz.) 1.00 Cable reel, screen drive, stacker 1.50 Auxiliary 1.00
Screw 1.00 Conveyor 1.50 Main drive 1.50
Blowers Cutter head drive, jig drive 2.50 Notching press, planer (reversing),
1.50
plate planer, punch press
Centrifugal 1.00 Pump, utility winch 1.50
Traverse 1.00
Lobe 1.50 Dynamometer 1.00
Metal forming machines
Vane 1.00 Elevators
Draw bench, carriage, main drive,
Brewing & distilling Bucket, freight 2.00 2.00
extruder
Bottling machinery, brew kettle 1.00 Exciter 1.00
Wire drawing, flattening machine 2.00
Cooker (continuous duty) 1.00 Fans
Mills rotary type
Mash tub 1.00 Centrifugal 1.00
Ball or pebble direct or 2.50
Scale hopper-frequent starting peaks 1.50 Cooling tower 2.00
On LS shaft gear reducer 2.50
Can filling machine 1.00 Heavy duty (forced draft) 1.50
On HS shaft gear reducer 2.00
Car dumper 1.50 Induced draft 1.50
Dryer and cooler 1.50
Car puller 1.50 Light 1.00
Rod or tube direct or 2.50
Clarifier 1.00 Propeller indoor 1.50
On LS shaft gear reducer 2.50
Classifier 1.00 Food industry
On HS shaft gear reducer 2.00
Clay-working machines Beet slicer 1.50
Tumbling barrel 1.50
Brick press, briquette mach., clay Cereal cooker 1.00
1.50 Mixers
working mach., pug mill Dough mixer, meat grinder 1.50
Concrete (continuous or intermittent) 1.50
Compressors
Generators
Muller-Simpson type 1.50
Centrifugal 1.00
Even load 1.00
Oil industry
Screw 2.50
Hoist or railway service 1.50
Chiller 1.00
Contact Dodge Welder load 2.00
Recipricating, Lobe Oil well pumping (not over 150%
engineeringw 2.00
Grizzly 2.00 peak torque
Conveyors
Kiln 2.00 Paraffin filter press 1.50
Apron, assembly, belt, chain, flight, Oven 1.00
Laundry machines Paper mills
Reciprocating 2.50
Tumbler washer 2.00 Agitator 1.00
Screw 1.00
Line shafts Barking drum 2.50
Cranes and hoists
Driving processing machinery 1.00 Beater and pulper 1.50
Main hoist-medium duty 1.50
Light 1.00 Bleacher 1.00
Main hoist-heavy duty 2.00
Lumber industry Calender 2.00
Skip hoist, travel motion, trolley 1.50
Band resaw 1.50 Chipper 3.00
Motion, slope 1.50
Circular resaw 1.50 Couch cylinder dryer 1.50
Crushers
Edger head rig, hog, log haul 2.00 Felt stretcher 1.00
Cane 2.00
Planer 1.50 Fourdrinier 1.50
Gyratory 2.50
Rolls non-reversing 1.50 Jordan 2.00
Rolls reversing 2.00 Press 2.00
Sawdust conveyor 1.00 Pulp grinder 2.00
Slab conveyor 1.50 Stock chest 1.50
Sorting table 1.50 Stock pump
Reciprocating 2.00
17
Factor ∆ Factor ∆ Factor ∆

Application (read footnotes) Raptor Application (read footnotes) Raptor Application (read footnotes) Raptor
Paper mills (continued) Rubber industry 1.50 Steel industry
Suction roll 2.00 Banbury mixer 1.50 Cold mills
Winder 1.50 Calender 2.00 Coiler up or down 1.50
Paraffin filter press 1.50 Cracker mixing mill plasticator 2.50 Strip, temper 2.00
Printing press 1.50 Refiner, sheeter 2.00 Hot mills
Propeller marine 1.50 Tire-building machine 2.00 Coiler up or down 1.50
Pullers Tire and tube press opener based Edger drive 1.50
1.00
on peak torque Feed roll blooming 3.00
Barge hall 2.50
Tuber and strainer 1.50
Pulverizers Roughing mill delivery 3.00
Warming mill 2.00
Hog 2.00 Non-reversing, sheet strip 3.00
Washer 2.50
Roller 1.50 Rod mill 2.50
Screens
Contact Dodge Soaking pit cover drive lift 3.00
Hammermill Air washing 1.00
engineeringw Soaking pit cover drive travel 3.00
Pumps Coal and sand rotary 1.50
Rollout table (non-reversing) 2.00
Centrifugal 1.00 Vibrating 2.50
Rollout table (reversing) 3.50
Descaling gear type 1.50 Water 1.00
Steering gear 1.00
Oil well pumping (not over 150% Sewage disposal equipment 1.00
2.00 Stoker
peak torque) Shovel 2.00
Textile mills
Rotary - other than gear 1.50 Shredder 1.50
Batcher 1.00
Contact Dodge
Recipricating “Calender, card machine, D can” 1.50
engineering
Dyeing machine 1.00
Loom 1.50
Mangel, napper, soaper 1.00
Spinner, tenter frame 1.50
Windlass 1.50
Woodworking machines 1.00
System service factor calculation

To determine the system service factor, the driver service factor adder (Table 1A) must be added to the driven service factor
(Table 1). Example: Determine the system service factor for a Raptor coupling used to couple a barking drum and a six-cylinder
diesel engine.
Driven S.F. + Driver S.F. Adder = System S.F.

2.5 + 0.5 = 3.0
∆ The service factors listed are intended only as a general guide. Where substantial shock occurs or starting and stopping is frequent as on some “inching”
drives and on some reversing drives or where the power source is an internal combustion engine with less than four cylinders - consult Dodge. Where
torsional vibrations occur as in, for example, internal combustion engine or reciprocating compressor or pump applications, check the coupling stiff
ness for the possible development of damaging large- amplitude vibrations. A complete system torsional analysis may be necessary.
** Add 0.5 to factor if without flywheel

♦ Consult Dodge for selection assistance
—
Table 1A - driver service factor adders
Electric motor High torque Reciprocating engine number of cylinders

Type of coupling Turbines
std. torque motors 12 or more 8 to 11 6 to 7 4 to 5 Less than 4
Raptor 0.00 0.00 0.00 0.00 0.50 0.50 0.50 ♦
—
Ratings & dimensions
Close-coupled - finished bore
C
B C B B B B C B
D E A D E A D E A
F F F
Outboard Inboard Hybrid
Max C(4) F(4)

Coupling Min. Max. Max. Weight (2)
Hp/100 torque A B D E
size bore bore (1) RPM Outboard Inboard Hybrid Outboard Inboard Hybrid (lbs.)
(in.-lbs.)
E2 0.50 1.13 0.31 194 7,500 3.50 0.94 1.90 1.34 1.62 1.85 1.65 3.78 3.22 3.50 1.2
E3 0.50 1.38 0.59 371 7,500 4.00 1.50 1.34 0.78 1.06 2.32 2.00 4.34 3.78 4.06 2.3
E4 0.50 1.63 0.89 558 7,500 4.56 1.68 1.34 0.42 0.88 2.60 2.36 4.70 3.78 4.24 3.3
E5 0.50 1.88 1.47 926 7,500 5.38 1.75 1.84 0.78 1.31 3.13 2.80 5.34 4.28 4.81 5.4
E10 0.50 2.13 2.31 1,456 7,500 6.38 1.88 1.84 0.52 1.18 3.65 3.30 5.60 4.28 4.94 7.6
E20 0.75 2.38 3.66 2,308 6,600 7.25 2.06 2.66 0.22 1.44 4.48 4.00 6.78 4.34 5.56 12.7
E30 0.75 2.88 5.79 3,651 5,800 8.25 2.31 3.39 0.03 1.71 5.42 4.62 8.01 4.65 6.33 19.7
E40 0.75 3.38 8.73 5,504 5,000 9.50 2.50 3.29 0.43 1.86 6.63 5.75 8.29 5.43 6.86 33.5
E50 1.13 3.63 12.1 7,656 4,200 11.00 2.75 3.91 0.09 2.00 8.13 6.13 9.41 5.59 7.50 50.9
E60 1.13 4.00 19.8 12,505 3,800 12.50 3.25 4.23 0.49 2.36 8.75 6.50 10.73 6.99 8.86 71.3
E70 1.38 4.50 35.1 22,132 3,600 14.00 3.62 4.80 0.52 2.66 9.25 6.99 12.04 7.76 9.90 82.0
E80 1.63 6.00 62.7 39,503 2,000 16.00 4.87 6.67 0.75 3.71 11.25 9.49 16.41 10.49 13.45 169.4
E100 2.50 6.75 135.0 85,085 1,900 21.00 5.50 3.77 1.77 2.77 14.13 10.51 14.77 12.77 13.77 252.6
E120 2.88 7.50 270.0 170,170 1,800 25.00 6.00 4.90 2.26 3.58 17.63 11.76 16.90 14.26 15.58 419.4
E140 3.25 9.00 540.0 340,340 1,500 30.00 7.00 5.02 3.02 4.02 20.88 15.01 19.02 17.02 18.02 593.4
(1) Consult page 29 for larger bore capacities with shallow keys.
(2) Weight of complete coupling in pounds
(3) All dimensions in inches
(4) Hubs are reversible and will accommodate different shaft spacing requirements
—
Close-coupled inch element assemblies
Standard Armored Replacement Standard Armored Replacement

Size Size
(natural rubber) elements hardware(1) (natural rubber) elements hardware(1)
E2 015843 017126 017000 E50 015851 017134 017003
E3 015844 017127 E60 015852 017135
E4 015845 017128 017001 E70 015853 017136 017004
E5 015846 017129 E80 015854 017137
E10 015847 017130 017180 E100 015931 017138 017005
E20 015848 017131 E120 015932 017139 017006
017002
E30 015849 017132 E140 015933 017140 017007
E40 015850 017133 017003
(1) Element assemblies include imperial hardware.
(2) Raptor elements are also available with metric hardware. This requires use of shaft hubs tapped for metric hardware. Reference International Couplings Catalog (9AKK107387) or
contact Dodge for more information.
19
—
Spacer - finished bore
B C (BSE) B B C (BSE) B B C (BSE) B
D E A D E D E A
A
F F F
Full spacer - outboard Half spacer - hybrid Half spacer - outboard
Coupling size Min. bore Max. bore( 1) Hp/100 Max rated torque (in.-lbs.) Max. RPM A B D E Weight (2) (lbs.)
ES2 - 1.13 0.31 194 7,500 3.50 0.94 1.85 1.65 1.86
ES3 - 1.38 0.59 371 7,500 4.00 1.50 2.32 2.00 3.73
ES4 - 1.63 0.89 558 7,500 4.56 1.69 2.60 2.36 5.12
ES5 - 1.88 1.47 926 7,500 5.38 1.75 3.13 2.80 7.78
ES10 - 2.13 2.31 1,456 7,500 6.38 1.88 3.65 3.30 10.35
ES20 0.75 2.38 3.66 2,308 6,600 7.25 2.06 4.48 4.00 17.31
ES30 0.75 2.88 5.79 3,651 5,800 8.25 2.31 5.42 4.62 26.81
ES40 0.75 3.38 8.73 5,504 5,000 9.50 2.50 6.63 5.75 43.57
ES50 1.13 3.63 12.1 7,656 4,200 11.00 2.75 8.13 6.13 63.98
ES60 1.13 4.00 19.8 12,505 3,800 12.50 3.25 8.75 6.50 94.85
ES70 1.38 4.50 35.1 22,132 3,600 14.00 3.62 9.25 6.99 106.34
ES80 1.63 6.00 62.7 39,503 2,000 16.00 4.87 11.25 9.49 207.47
(1) Consult page 29 for larger bore capacities with shallow keys.
(2) Weight of complete coupling at maximum bore with four spacer extensions
—
Finished bore spacer length options
Standard (natural rubber) C (BSE)(4)(5) F(4)(5)

Coupling Armored element part number
element part number Half spacer Full spacer Half spacer Full spacer
size
Full spacer Half spacer Full spacer Half spacer Min. Max. Min. Max. Min. Max. Min. Max.
ES2 017064 017182 017156 017218 2.51 3.01 3.50 4.12 4.39 4.89 5.38 6.00
ES3 017065 017183 017157 017219 2.14 3.43 3.50 5.51 5.14 6.43 6.50 8.51
ES4 017066 017184 017158 017220 1.96 3.43 3.50 5.51 5.34 6.81 6.88 8.89
ES5 017067 017185 017159 017221 2.14 3.68 3.50 5.51 5.64 7.18 7.00 9.01
ES10 017068 017186 017160 017222 2.01 3.68 3.50 5.51 5.77 7.44 7.26 9.27
ES20 017069 017187 017161 017223 2.38 5.20 4.54 7.74 6.50 9.32 8.66 11.86
ES30 017070 017188 017162 017224 2.24 5.42 4.44 7.86 6.86 10.04 9.06 12.48
ES40 017071 017189 017163 017225 2.51 5.46 5.04 7.63 7.51 10.46 10.04 12.63
ES50 017072 017190 017164 017226 2.94 6.32 5.76 8.72 8.44 11.82 11.26 14.22
ES60 017073 017191 017165 017227 3.13 7.38 6.37 10.52 9.63 13.88 12.87 17.02
ES70 017074 017192 017166 017228 3.36 7.80 7.00 10.80 10.60 15.04 14.24 18.04
ES80 017075 017193 017167 017229 4.04 11.28 8.98 15.88 13.78 21.02 18.82 25.62
(2) Table shows actual spacer lengths.
(3) All calculations based off of outboard hubs.
(5) Consult factory for minimum shaft spacing
—
Hub part numbers
Finished bore - inch bores
Bore Coupling size

(in.) 2 3 4 5 10 20 30 40 50 60 70 80 100 120 140
Reborable 015234 015235 015236 015237 015238 015239 015240 015241 015242 015243 015244 015245 015246 015247 015248
1/2" 015425 015436 015451 015474 015501
9/16" 015426 015437 015452 015475 015502
5/8" 015427 015438 015453 015476 015503
11/16" 015428 015439 015454 015477 015504
3/4" 015429 015440 015455 015478 015505 015532 015563 015602
13/16" 015430 015441 015456 015479 015506 015533 015564 015603
7/8" 015431 015442 015457 015480 015507 015534 015565 015604
15/16" 015432 015443 015458 015481 015508 015535 015566 015605
1" 015433 015444 015459 015482 015509 015536 015567 015606
1-1/16" 015434 015445 015460 015483 015510 015537 015568 015607
1-1/8" 015435 015446 015461 015484 015511 015538 015569 015608 015649 015694
1-3/16" 015447 015462 015485 015512 015539 015570 015609 015650 015695
1-1/4" 015448 015463 015486 015513 015540 015571 015610 015651 015696
1-5/16" 015449 015464 015487 015514 015541 015572 015611 015652 015697
1-3/8" 015450 015465 015488 015515 015542 015573 015612 015653 015698 015749
1-7/16" 015466 015489 015516 015543 015574 015613 015654 015699 015750
1-1/2" 015467 015490 015517 015544 015575 015614 015655 015700 015751
1-9/16" 015468 015491 015518 015545 015576 015615 015656 015701 015752
1-5/8" 015469 015492 015519 015546 015577 015616 015657 015702 015753 015867
1-11/16" 015493 015520 015547 015578 015617 015658 015703 015754 015868
1-3/4" 015494 015521 015548 015579 015618 015659 015704 015755 015869
1-13/16" 015495 015522 015549 015580 015619 015660 015705 015756 015870
1-7/8" 015496 015523 015550 015581 015620 015661 015706 015757 015871
1-15/16" 015524 015551 015582 015621 015662 015707 015758 015872
2" 015525 015552 015583 015622 015663 015708 015759 015873
2-1/16" 015526 015553 015584 015623 015664 015709 015760 015874
2-1/8" 015527 015554 015585 015624 015665 015710 015761 015875
2-3/16" 015555 015586 015625 015666 015711 015762 015876
2-1/4" 015556 015587 015626 015667 015712 015763 015877
2-5/16" 015557 015588 015627 015668 015713 015764 015878
2-3/8" 015558 015589 015628 015669 015714 015765 015879
2-7/16" 015590 015629 015670 015715 015766 015880
2-1/2" 015591 015630 015671 015716 015767 015881 015010
2-9/16" 015592 015631 015672 015717 015768 015882 015011
2-5/8" 015593 015632 015673 015718 015769 015883 015012
2-11/16" 015594 015633 015674 015719 015770 015884 015013
2-3/4" 015595 015634 015675 015720 015771 015885 015014
2-13/16" 015596 015635 015676 015721 015772 015886 015015
2-7/8" 015597 015636 015677 015722 015773 015887 015016 015075
2-15/16" 015637 015678 015723 015774 015888 015017 015076
3" 015638 015679 015724 015775 015889 015018 015077
3-1/16" 015639 015680 015725 015776 015890 015019 015078
3-1/8" 015640 015681 015726 015777 015891 015020 015079
3-3/16" 015641 015682 015727 015778 015892 015021 015080
3-1/4" 015642 015683 015728 015779 015893 015022 015081 015146
3-5/16" 015643 015684 015729 015780 015894 015023 015082 015147
3-3/8" 015644 015685 015730 015781 015895 015024 015083 015148
3-7/16" 015686 015731 015782 015896 015025 015084 015149
3-1/2" 015687 015732 015783 015897 015026 015085 015150
• Stock bores
• Listed shaft hubs are tapped for imperial hardware, and intended for use with Imperial element assemblies. Shaft hubs and element assemblies are also available for use with
metric hardware. Reference International Catalog (9AKK107387) or contact Dodge for more information.
• Unless otherwise specified, finished bores for sizes E2-E60 are Class 1 clearance fit and sizes E70-E140 are interference fit per AGMA 9002. See pages 29-33 for additional
details.
21
Bore Coupling size

(in.) 2 3 4 5 10 20 30 40 50 60 70 80 100 120 140
3-9/16" 015688 015733 015784 015898 015027 015086 015151
3-5/8" 015689 015734 015785 015899 015028 015087 015152
3-11/16" 015735 015786 015900 015029 015088 015153
3-3/4" 015736 015787 015901 015030 015089 015154
3-13/16" 015737 015788 015902 015031 015090 015155
3-7/8" 015738 015789 015903 015032 015091 015156
3-15/16" 015739 015790 015904 015033 015092 015157
4" 015740 015791 015905 015034 015093 015158
4-3/16" 015792 015906 015035 015094 015159
4-1/4" 015793 015907 015036 015095 015160
4-3/8" 015794 015908 015037 015530 015531
4-7/16" 015795 015909 015038 015096 015161
4-1/2" 015796 015910 015039 015097 015162
4-11/16" 015911 015040 015098 015163
4-3/4" 015912 015041 015099 015164
4-7/8" 015913 015042 015100 015165
4-15/16" 015914 015043 015101 015166
5" 015915 015044 015102 015167
5-3/16" 015916 015045 015103 015168
5-1/4" 015917 015046 015104 015169
5-7/16" 015918 015047 015105 015170
5-1/2" 015919 015048 015106 015171
5-11/16" 015920 015049 015107 015172
5-3/4" 015921 015050 015108 015173
5-7/8" 015528 015529 015109 015174
5-15/16" 015922 015051 015110 015175
6" 015923 015052 015111 015176
6-3/16" 015053 015112 015177
6-1/4" 015054 015113 015178
6-7/16" 015055 015114 015179
6-1/2" 015056 015115 015180
6-11/16" 015057 015116 015181
6-3/4" 015058 015117 015182
6-15/16" 015118 015183
7" 015119 015184
7-3/16" 015120 015185
7-1/4" 015121 015186
7-7/16" 015122 015187
7-1/2" 015123 015188
7-11/16" 015189
7-3/4" 015190
7-15/16" 015191
8" 015192
8-3/16" 015193
8-1/4" 015194
8-7/16" 015195
8-1/2" 015196
8-11/16" 015197
8-3/4" 015198
8-15/16" 015199
9" 015200
• Unless otherwise specified, finished bores for sizes E2-E60 are Class 1 clearance fit and sizes E70-E140 are interference fit per AGMA 9002. See pages 29-33 for additional
details.
—
Hub part numbers
Finished bore - metric bores
Bore Coupling size

(mm) 2 3 4 5 10 20 30 40 50 60 70 80 100 120 140
Reborable 015234 015235 015236 015237 015238 015239 015240 015241 015242 015243 015244 015245 015246 015247 015248
11 016225 016236 016250 016267 016286
12 016226 016237 016251 016268 016287
14 016227 016238 016252 016269 016288
16 016228 016239 016253 016270 016289
17 016229 016240 016254 016271 016290
18 016230 016241 016255 016272 016291
19 016231 016242 016256 016273 016292 016307 016325 016347
20 016232 016243 016257 016274 016293 016308 016326 016348
22 016233 016244 016258 016275 016294 016309 016327 016349
24 016234 016245 016259 016276 016295 016310 016328 016350
25 016235 016246 016260 016277 016296 016311 016329 016351
28 016247 016261 016278 016297 016312 016330 016352 016372 016393
30 016248 016262 016279 016298 016313 016331 016353 016373 016394
32 016249 016263 016280 016299 016314 016332 016354 016374 016395
35 016264 016281 016300 016315 016333 016355 016375 016396 016416
38 016265 016282 016301 016316 016334 016356 016376 016397 016417
40 016266 016283 016302 016317 016335 016357 016377 016398 016418 016438
42 016284 016303 016318 016336 016358 016378 016399 016419 016439
45 016285 016304 016319 016337 016359 016379 016400 016420 016440
48 016305 016320 016338 016360 016380 016401 016421 016441
50 016306 016321 016339 016361 016381 016402 016422 016442
55 016322 016340 016362 016382 016403 016423 016443
56 016323 016341 016363 016383 016404 016424 016444
60 016324 016342 016364 016384 016405 016425 016445
63 016343 016365 016385 016406 016426 016446 016468
65 016344 016366 016386 016407 016427 016447 016469
70 016345 016367 016387 016408 016428 016448 016470
71 016346 016368 016388 016409 016429 016449 016471
75 016369 016389 016410 016430 016450 016472 016496
80 016370 016390 016411 016431 016451 016473 016497
85 016371 016391 016412 016432 016452 016474 016498
90 016392 016413 016433 016453 016475 016499
95 016414 016434 016454 016476 016500 016526
100 016415 016435 016455 016477 016501 016527
105 016436 016456 016478 016502 016528
110 016437 016457 016479 016503 016529
120 016458 016480 016504 016530
125 016459 016481 016505 016531
130 016460 016482 016506 016532
140 016461 016483 016507 016533
150 016462 016484 016508 016534
• Unless otherwise specified, finished bores for E2-E60 are transitional fit and sizes E70-E80 are interference fit per ISO R775. See pages 29-33 for details.
23
—
Mill motor
B C
D E A
—
Mill motor hubs - HCBMM
Max rated
Weight Part
Size Mill motor size Hp/100 torque Max. RPM A B C D E F Description
(lbs.) number
(in.-lbs.)
E10 602/802 2.31 1,456 7,500 6.38 3.00 1.81 3.65 2.88 6.68 5.8 10HMMCB - 602/802 017088
802B/802C 3.00 7.44 9.8 20HMMCB - 802 017089
E20 3.66 2,308 6,600 7.25 2.38 4.48 3.00
603 3.50 7.94 9.1 20HMMCB - 603 017090
E30 603/803, 604/804 5.79 3,651 5,800 8.25 3.50 2.44 5.42 3.50 8.25 15.8 30HMMCB - 603/803 604/804 017091
E40 604/804 8.73 5,504 5,000 9.50 3.50 2.68 6.63 3.50 8.68 26.0 40HMMCB - 604/804 017092
406/606/806 10.13 39.8 50HMMCB - 406/606/806 017093
E50 12.15 7,656 4,200 11.00 4.00 3.38 8.13 4.00
408/608/808 10.63 36.0 50HMMCB - 408/608/808 017094
406/606/806 10.69 58.2 60HMMCB - 406/606/806 017095
E60 19.84 12,505 3,800 12.50 4.00 3.44 8.75 4.50
408/608/808 11.19 54.8 60HMMCB - 408/608/808 017096
408/608/808 61.0 70HMMCB - 408/608/808 017097
11.88
E70 410/610/810 35.12 22,132 3,600 14.00 4.50 3.75 9.25 4.75 58.4 70HMMCB - 410/610/810 017098
412/612/812 12.38 54.4 70HMMCB - 412/612/812 017099
410/610/810 4.50 14.38 118.0 80HMMCB - 410/610/810 017100
E80 412/612/812 62.68 39,503 2,000 16.00 5 11.25 6.00 115.3 80HMMCB - 412/612/812 017101
5.00 14.88
614 106.1 80HMMCB - 614 017102
612/812 216.6 100HMMCB - 612/812 017103
5.00 14.25
614/814 207.4 100HMMCB - 614/814 017104
E100 134.96 85,057 1,900 21.00 3.75 14.13 10.25
616/816 5.50 14.75 208.3 100HMMCB - 616/816 017105
618/818 6.00 15.25 207.5 100HMMCB - 618/818 017106
818 6.00 16.88 366.3 120HMMCB - 818 017107
E120 269.91 170,109 1,800 25.00 4.88 17.63 11.75
620 6.75 17.63 357.3 120HMMCB - 620 017108
622 7.25 19.25 504.2 140HMMCB - 622 017109
E140 539.80 340,209 1,500 30.00 5 20.88 15.00
624 9.25 21.25 537.3 140HMMCB - 624 017110
—
Close-coupled - Taper-Lock bushed
B C B B C B B C B
D E A D EA D E A
F F F
C F
Coupling Bushing Max. Max torque Max. Weight (5)
Hp/100 A B D E
size size bore (1) (in.-lbs.)(2) RPM Outboard Inboard Hybrid Outboard Inboard Hybrid (lbs.)
E3 1008 1.00 0.59 371 7,500 4.00 0.88 1.68 1.68 1.68 2.32 2.00 3.44 3.44 3.44 2.2
E4 1008 1.00 0.89 558 7,500 4.56 0.88 1.68 1.68 1.68 2.60 2.25 3.44 3.44 3.44 2.9
E5 1108 1.13 1.47 926 7,500 5.38 0.88 2.17 2.19 2.19 3.13 2.80 3.93 3.95 3.95 4.8
E10 1310 1.44 2.31 1,456 7,500 6.38 1.00 2.06 2.06 2.06 3.65 3.30 4.06 4.06 4.06 6.4
E20 1610 1.69 3.66 2,308 6,600 7.25 1.00 2.50 2.50 2.50 4.48 3.50 4.50 4.50 4.50 9.2
E30 2012 2.13 5.79 3,651 5,800 8.25 1.25 2.56 2.56 2.56 5.42 4.01 5.06 5.06 5.06 14.8
E40 2517 2.69 8.73 5,504 5,000 9.50 1.75 2.38 2.38 2.38 6.63 4.63 5.88 5.88 5.88 23.8
E50 2517 2.69 12.1 7,656 4,200 11.00 1.75 3.00 3.00 3.00 8.13 4.93 6.50 6.50 6.50 35.2
E60 3020 3.25 19.8 12,505 3,800 12.50 2.00 3.31 3.31 3.31 8.75 5.75 7.31 7.31 7.31 53.6
E70 3535 3.94 35.1 22,132 3,600 14.00 3.50 2.38 2.38 2.38 9.25 6.50 9.38 9.38 9.38 77.7
E80 4040 4.44 62.7 39,503 2,000 16.00 4.00 3.75 3.75 3.75 11.25 7.75 11.75 11.75 11.75 129.0
E100 4535 4.94 135.0 85,085 1,900 21.00 3.50 6.06 3.56 4.81 14.13 10.51 13.06 10.56 11.81 254.0
E120 5040 5.00 199.9 126,000 (2) 1,800 25.00 4.00 6.78 4.14 5.46 17.63 11.76 14.78 12.14 13.46 428.0
E140 7060 7.00 540.0 340,340 1,500 30.00 6.00 6.99 2.99 4.99 20.88 15.01 18.99 14.99 16.99 713.0
(1) All maximum bore dimensions are based off of shallow keys
(2) Maximum torque is limited by maximum bushing rated torque
(3) Space required to install bushing with shortened hex key
(4) Space required to remove bushing with shortened hex key
(5) Weight of complete coupling including the bushing at maximum bore
—
Taper-Lock bushed part numbers
Coupling size TL hub Bushing size Standard (natural rubber) element Armored elements Replacement hardware(1)
3HTL 015801 1008 015844 017127
4HTL 015802 1008 015845 017128 017001
5HTL 015803 1108 015846 017129
10HTL 015804 1310 015847 017130 017180
20HTL 015805 1610 015848 017131
017002
30HTL 015806 2012 015849 017132
40HTL 015807 2517 015850 017133
017003
50HTL 015808 2517 015851 017134
60HTL 015809 3020 015852 017135
70HTL 015810 3535 015853 017136 017004
80HTL 015865 4040 015854 017137
100HTL 015201 4535 015931 017138 017005
120HTL 015202 5040 015932 017139 017006
140HTL 015203 7060 015933 017140 017007
25
—
Spacer - Taper-Lock bushed
B C B B C B
D E A D E A
F F
Full spacer Half spacer
Coupling size Bushing size Max bore (1) Hp/100 Max rated torque (in.-lbs.) Max. RPM A B D E Weight (2) (lbs.)
ES3 1008 1.00 0.59 371 7,500 4.00 0.88 2.32 2.00 3.6
ES4 1008 1.00 0.89 558 7,500 4.56 0.88 2.60 2.36 4.7
ES5 1108 1.13 1.47 926 7,500 5.38 0.88 3.13 2.80 7.2
ES10 1310 1.44 2.31 1,456 7,500 6.38 1.00 3.65 3.30 9.2
ES20 1610 1.69 3.66 2,308 6,600 7.25 1.00 4.48 4.00 13.8
ES30 2012 2.13 5.79 3,651 5,800 8.25 1.25 5.42 4.62 21.9
ES40 2517 2.69 8.73 5,504 5,000 9.50 1.75 6.63 5.75 33.9
ES50 2517 2.69 12.1 7,656 4,200 11.00 1.75 8.13 6.13 48.3
ES60 3020 3.25 19.8 12,505 3,800 12.50 2.00 8.75 6.50 77.1
ES70 3535 3.94 35.1 22,132 3,600 14.00 3.50 9.25 6.99 102.0
ES80 4040 4.44 62.7 39,503 2,000 16.00 4.00 11.25 9.49 166.8
(1) Maximum bores may require use of shallow key and/or steel bushings. Consult the Dodge PTC Engineering catalog for bushing requirements.
(2) Weight of complete coupling at maximum bore with four spacer extensions and bushings at maximum bore
—
Taper-Lock bushed spacer length options
Standard (natural rubber) C (BSE) F

Coupling Armored elements part number
Element part number Half spacer Full spacer Half spacer Full spacer
size
ES3 017065 017183 017157 017219 2.76 3.77 3.84 5.85 4.52 5.53 5.60 7.61
ES4 017066 017184 017158 017220 2.76 3.77 3.84 5.85 4.52 5.53 5.60 7.61
ES5 017067 017185 017159 017221 3.01 4.02 3.84 5.85 4.77 5.78 5.60 7.61
ES10 017068 017186 017160 017222 2.89 3.90 3.72 5.73 4.89 5.90 5.72 7.73
ES20 017069 017187 017161 017223 3.54 5.04 4.58 7.58 5.54 7.04 6.58 9.58
ES30 017070 017188 017162 017224 3.51 5.01 4.45 7.45 6.01 7.51 6.95 9.95
ES40 017071 017189 017163 017225 3.49 4.55 4.59 6.72 6.99 8.05 8.09 10.22
ES50 017072 017190 017164 017226 4.15 5.41 5.29 7.81 7.65 8.91 8.79 11.31
ES60 017073 017191 017165 017227 4.68 6.46 6.05 9.60 8.68 10.46 10.05 13.60
ES70 017074 017192 017166 017228 3.88 5.38 5.38 8.38 10.88 12.38 12.38 15.38
ES80 017075 017193 017167 017229 5.74 8.36 7.72 12.96 13.74 16.36 15.72 20.96
—
Close-Coupled - QD Bushed
C
B C B B B B C B
D EA D E A D E A
F F F
Coupling Bushing Max. Max torque Max. C (7) F (7) Weight (5)
Hp/100 A B D E
size size bore (1) (in.-lbs.)(2) RPM Outboard Inboard Hybrid Outboard Inboard Hybrid (lbs.)
E4 JA 1.19 0.89 558 7,500 4.56 1.00 1.90 1.22 1.57 2.60 2.25 3.90 3.24 3.57 2.9
E5 SH 1.63 1.47 926 7,500 5.38 1.25 1.88 1.62 1.75 3.13 2.80 4.38 4.12 4.25 4.9
E10 SDS 1.94 2.31 1,456 7,500 6.38 1.31 2.32 1.20 1.76 3.65 3.30 4.94 3.82 4.38 6.3
E20 SK 2.50 3.66 2,308 6,600 7.25 1.88 2.62 0.44 1.53 4.48 3.81 6.38 4.20 5.29 11.1
E30 SF 2.94 5.79 3,651 5,800 8.25 2.00 2.43 1.25 1.84 5.42 4.50 6.43 5.25 5.84 17.6
E40 E 3.50 8.73 5,504 5,000 9.50 2.63 2.00 1.00 1.50 6.63 5.75 7.26 6.26 6.76 33.1
E50 E 3.50 12.1 7,656 4,200 11.00 2.63 3.13 1.11 2.12 8.13 5.75 8.39 6.37 7.38 44.9
E60 F 3.94 19.8 12,505 3,800 12.50 3.63 2.13 1.19 1.66 8.75 6.50 9.39 8.45 8.92 68.4
E70 J 4.50 35.1 22,132 3,600 14.00 4.50 1.70 0.92 1.31 9.25 7.25 10.70 9.92 10.31 90.7
E80 M 5.50 62.7 39,503 2,000 16.00 6.75 1.49 0.31 0.90 11.25 9.49 14.99 13.81 14.40 203.0
E100 M 5.50 134.9 85,000 1,900 21.00 6.75 1.77 1.07 1.42 14.13 10.51 15.27 14.57 14.92 297.0
E120 N 6.00 238.0 150,000 (2) 1,800 25.00 8.12 2.27 0.77 1.52 17.63 11.51 18.51 17.01 17.76 496.0
E140 P 7.00 396.7 250,000 (2) 1,500 30.00 9.38 3.52 - 1.64 20.88 15.01 22.28 - 20.40 835.0
(1) All maximum bore dimensions are based off of shallow keys
(2) Maximum torque is limited by maximum bushing rated torque
(3) Space required to install bushing with open end wrench
(4) Space required to remove bushing with open end wrench
(5) Weight of complete coupling including the bushing at maximum bore
—
QD bushed part numbers
Coupling size QD hub Bushing size Standard (natural rubber) element Armored elements Replacement hardware(1)
4HQD 015811 JA 015845 017128
017001
5HQD 015812 SH 015846 017129
10HQD 015813 SDS 015847 017130 017180
20HQD 015814 SK 015848 017131
017002
30HQD 015815 SF 015849 017132
40HQD 015816 E 015850 017133
017003
50HQD 015817 E 015851 017134
60HQD 015818 F 015852 017135
70HQD 015819 J 015853 017136 017004
80HQD 015866 M 015854 017137
100HQD 015204 M 015931 017138 017005
120HQD 015205 N 015932 017139 017006
140HQD 015206 P 015933 017140 017007
27
—
Spacer - QD bushed
B C B B C B
D E A D E A
F F
Outboard full spacer Outboard half spacer
Coupling size Bushing size Max. bore (1) Hp/100 Max rated torque (in.-lbs) Max. RPM A B D E Weight (2) (lbs.)
ES4 JA 1.19 0.89 558 7,500 4.56 1.00 2.60 2.36 4.7
ES5 SH 1.63 1.47 926 7,500 5.38 1.25 3.13 2.80 7.2
ES10 SDS 1.94 2.31 1,456 7,500 6.38 1.31 3.65 3.30 9.0
ES20 SK 2.50 3.66 2,308 6,600 7.25 1.88 4.48 4.00 15.7
ES30 SF 2.94 5.79 3,651 5,800 8.25 2.00 5.42 4.62 24.8
ES40 E 3.50 8.73 5,504 5,000 9.50 2.63 6.63 5.75 43.1
ES50 E 3.50 12.1 7,656 4,200 11.00 2.63 8.13 6.13 58.0
ES60 F 3.94 19.8 12,505 3,800 12.50 3.63 8.75 6.50 91.9
ES70 J 4.50 35.1 22,132 3,600 14.00 4.50 9.25 6.99 115.0
ES80 M 5.50 62.7 39,503 2,000 16.00 6.75 11.25 9.49 240.9
(1) Maximum bores may require use of shallow key. Consult the Dodge PTC Engineering catalog for bushing requirements.
(2) Weight of complete coupling at maximum bore with four spacer extensions
—
QD bushed spacer length options
Standard (natural rubber) C (BSE)(4)(5) F(4)(5)

Coupling Armored elements part number
Element part number Half spacer Full spacer Half spacer Full spacer
size
ES4 017066 017184 017158 017220 2.64 3.99 4.06 6.07 4.64 5.99 6.06 8.07
ES5 017067 017185 017159 017221 2.64 3.72 3.54 5.55 5.14 6.22 6.04 8.05
ES10 017068 017186 017160 017222 2.58 4.16 3.98 5.99 5.20 6.78 6.60 8.61
ES20 017069 017187 017161 017223 2.66 5.16 4.70 7.70 6.42 8.92 8.46 11.46
ES30 017070 017188 017162 017224 2.76 4.88 4.32 7.32 6.76 8.88 8.32 11.32
ES40 017071 017189 017163 017225 2.61 4.17 4.21 6.34 7.78 9.43 9.47 11.60
ES50 017072 017190 017164 017226 3.27 5.54 5.42 7.94 8.53 10.80 10.68 13.20
ES60 017073 017191 017165 017227 3.05 5.28 4.87 8.42 10.31 12.54 12.13 15.68
ES70 017074 017192 017166 017228 2.88 4.70 4.70 7.70 11.88 13.70 13.70 16.70
ES80 017075 017193 017167 017229 2.99 6.10 5.46 10.70 16.49 19.60 18.98 24.20
(3) All calculations based off of outboard hubs.
(5) Consult factory for minimum shaft spacing
—
Spacer element component details
Close-coupled
Raptor element
Spacer extension
hardware
Spacer
extensions
Element
hardware
—
Raptor spacer element component part numbers
Complete spacer element assemblies Replacement components

Coupling size Standard (natural rubber) elements Close-coupled elements (1) (2) Spacer extension Replacement
Full spacer Half spacer Standard (natural rubber) Armored elements kit (3) (4) hardware
ES2 017064 017182 015843 017126 017040 017000
ES3 017065 017183 015844 017127 017041
ES4 017066 017184 015845 017128 017042 017001
ES5 017067 017185 015846 017129 017043
ES10 017068 017186 015847 017130 017044 017180
ES20 017069 017187 015848 017131 017045
017002
ES30 017070 017188 015849 017132 017046
ES40 017071 017189 015850 017133 017047
017003
ES50 017072 017190 015851 017134 017048
ES60 017073 017191 015852 017135 017049
ES70 017074 017192 015853 017136 017050 017004
ES80 017075 017193 015854 017137 017051
(1) For replacement on existing Raptor half or full spacer couplings, purchase only close-coupled element if spacer extensions remain on shaft hubs
(2) For replacement on existing Raptor half or full spacer couplings, purchase close-coupled element and one set of replacement hardware if spacer extensions have been removed from
shaft hubs
(3) To convert an existing close-coupled Raptor element into a half spacer element, purchase one spacer extension kit
(4) To convert an existing close-coupled Raptor element into a full spacer element, purchase two spacer extension kits
29
—
Engineering
AMGA 9002 inch bore and keyway fits
Clearance fit Interference fit Standard keyway (square key) Shallow keyway (rectangular keys)
Nominal Shaft diameter Hub Hub Scribe Scribe
shaft Fit Fit Nominal Width Nominal Width
bore bore height height
diameter
Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Width Height Min. Max. Min. Max. Width Height Min. Max. Min. Max.
1/2 - 1-1/2 (incl.) -0.0005 +0.0000 +0.000 +0.0010 -0.0000 +0.0015 -0.0010 -0.0005 -0.0000 -0.0010
1/2 0.4995 0.5000 0.5000 0.5010 -0.0000 +0.0015 0.4990 0.4995 -0.0000 -0.0010 0.1250 0.1250 0.1250 0.1270 0.5546 0.5646 0.1250 0.0937 0.1250 0.1270 0.5389 0.5489
5/8 0.6245 0.6250 0.6250 0.6260 -0.0000 +0.0015 0.6240 0.6245 -0.0000 -0.0010 0.1250 0.1250 0.1250 0.1270 0.6812 0.6912 0.1250 0.0937 0.1250 0.1270 0.6655 0.6755
3/4 0.7495 0.7500 0.7500 0.7510 -0.0000 +0.0015 0.7490 0.7495 -0.0000 -0.0010 0.1875 0.1875 0.1875 0.1895 0.8318 0.8418 0.1875 0.1250 0.1875 0.1895 0.8006 0.8106
7/8 0.8745 0.8750 0.8750 0.8760 -0.0000 +0.0015 0.8740 0.8745 -0.0000 -0.0010 0.1875 0.1875 0.1875 0.1895 0.9586 0.9686 0.1875 0.1250 0.1875 0.1895 0.9273 0.9373
15/16 0.9370 0.9375 0.9375 0.9385 -0.0000 +0.0015 0.9365 0.9370 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.0455 1.0555 0.2500 0.1875 0.2500 0.2520 1.0143 1.0243
1 0.9995 1.0000 1.0000 1.0010 -0.0000 +0.0015 0.9990 0.9995 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.1091 1.1191 0.2500 0.1875 0.2500 0.2520 1.0779 1.0879
1-1/16 1.0620 1.0625 1.0625 1.0635 -0.0000 +0.0015 1.0615 1.0620 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.1726 1.1826 0.2500 0.1875 0.2500 0.2520 1.1413 1.1513
1-1/8 1.1245 1.1250 1.1250 1.1260 -0.0000 +0.0015 1.1240 1.1245 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.2359 1.2459 0.2500 0.1875 0.2500 0.2520 1.2047 1.2147
1-3/16 1.1870 1.1875 1.1875 1.1885 -0.0000 +0.0015 1.1865 1.1870 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.2992 1.3092 0.2500 0.1875 0.2500 0.2520 1.2679 1.2779
1-1/4 1.2495 1.2500 1.2500 1.2510 -0.0000 +0.0015 1.2490 1.2495 -0.0000 -0.0010 0.2500 0.2500 0.2500 0.2520 1.3624 1.3724 0.2500 0.1875 0.2500 0.2520 1.3311 1.3411
1-5/16 1.3120 1.3125 1.3125 1.3135 -0.0000 +0.0015 1.3115 1.3120 -0.0000 -0.0010 0.3125 0.3125 0.3125 0.3145 1.4499 1.4599 0.3125 0.2500 0.3125 0.3145 1.4186 1.4286
1-3/8 1.3745 1.3750 1.3750 1.3760 -0.0000 +0.0015 1.3740 1.3745 -0.0000 -0.0010 0.3125 0.3125 0.3125 0.3145 1.5133 1.5233 0.3125 0.2500 0.3125 0.3145 1.4820 1.4920
1-7/16 1.4370 1.4375 1.4375 1.4385 -0.0000 +0.0015 1.4365 1.4370 -0.0000 -0.0010 0.3750 0.3750 0.3750 0.3775 1.6001 1.6101 0.3750 0.2500 0.3750 0.3775 1.5376 1.5476
1-1/2 1.4995 1.5000 1.5000 1.5010 -0.0000 +0.0015 1.4990 1.4995 -0.0000 -0.0010 0.3750 0.3750 0.3750 0.3775 1.6637 1.6737 0.3750 0.2500 0.3750 0.3775 1.6012 1.6112
1-1/2 - 3 (incl.) -0.0010 +0.0000 +0.000 +0.0010 -0.0000 +0.0020 -0.0020 -0.0010 -0.0000 -0.0020 0.3750 0.3750 0.3750 0.3775 0.3750 0.2500 0.3750 0.3775
1-9/16 1.5615 1.5625 1.5625 1.5635 -0.0000 +0.0020 1.5605 1.5615 -0.0000 -0.0020 0.3750 0.3750 0.3750 0.3775 1.7272 1.7372 0.3750 0.2500 0.3750 0.3775 1.6647 1.6747
1-5/8 1.6240 1.6250 1.6250 1.6260 -0.0000 +0.0020 1.6230 1.6240 -0.0000 -0.0020 0.3750 0.3750 0.3750 0.3775 1.7906 1.8006 0.3750 0.2500 0.3750 0.3775 1.7281 1.7381
1-11/16 1.6865 1.6875 1.6875 1.6885 -0.0000 +0.0020 1.6855 1.6865 -0.0000 -0.0020 0.3750 0.3750 0.3750 0.3775 1.8539 1.8639 0.3750 0.2500 0.3750 0.3775 1.7914 1.8014
1-3/4 1.7490 1.7500 1.7500 1.7510 -0.0000 +0.0020 1.7480 1.7490 -0.0000 -0.0020 0.3750 0.3750 0.3750 0.3775 1.9172 1.9272 0.3750 0.2500 0.3750 0.3775 1.8547 1.8647
1-13/16 1.8115 1.8125 1.8125 1.8135 -0.0000 +0.0020 1.8105 1.8115 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.0273 2.0373 0.5000 0.3750 0.5000 0.5025 1.9648 1.9748
1-7/8 1.8740 1.8750 1.8750 1.8760 -0.0000 +0.0020 1.8730 1.8740 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.0911 2.1011 0.5000 0.3750 0.5000 0.5025 2.0286 2.0386
1-15/16 1.9365 1.9375 1.9375 1.9385 -0.0000 +0.0020 1.9355 1.9365 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.1547 2.1647 0.5000 0.3750 0.5000 0.5025 2.0922 2.1022
2 1.9990 2.0000 2.0000 2.0010 -0.0000 +0.0020 1.9980 1.9990 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.2182 2.2282 0.5000 0.3750 0.5000 0.5025 2.1557 2.1657
2-1/16 2.0615 2.0625 +0.000 +0.0015 -0.0000 +0.0025 2.0605 2.0615 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.2817 2.2917 0.5000 0.3750 0.5000 0.5025 2.2192 2.2292
2-1/8 2.1240 2.1250 2.1250 2.1265 -0.0000 +0.0025 2.1230 2.1240 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.3452 2.3552 0.5000 0.3750 0.5000 0.5025 2.2827 2.2927
2-3/16 2.1865 2.1875 2.1875 2.1890 -0.0000 +0.0025 2.1855 2.1865 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.4085 2.4185 0.5000 0.3750 0.5000 0.5025 2.3460 2.3560
2-1/4 2.2490 2.2500 2.2500 2.2515 -0.0000 +0.0025 2.2480 2.2490 -0.0000 -0.0020 0.5000 0.5000 0.5000 0.5025 2.4719 2.4819 0.5000 0.3750 0.5000 0.5025 2.4094 2.4194
2-5/16 2.3115 2.3125 2.3125 2.3140 -0.0000 +0.0025 2.3105 2.3115 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.5820 2.5920 0.6250 0.4375 0.6250 0.6280 2.4882 2.4982
2-3/8 2.3740 2.3750 2.3750 2.3765 -0.0000 +0.0025 2.3730 2.3740 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.6456 2.6556 0.6250 0.4375 0.6250 0.6280 2.5519 2.5619
2-7/16 2.4365 2.4375 2.4375 2.4390 -0.0000 +0.0025 2.4355 2.4365 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.7093 2.7193 0.6250 0.4375 0.6250 0.6280 2.6155 2.6255
2-1/2 2.4990 2.5000 2.5000 2.5015 -0.0000 +0.0025 2.4980 2.4990 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.7728 2.7828 0.6250 0.4375 0.6250 0.6280 2.6791 2.6891
2-9/16 2.5615 2.5625 2.5625 2.5640 -0.0000 +0.0025 2.5605 2.5615 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.8363 2.8463 0.6250 0.4375 0.6250 0.6280 2.7426 2.7526
2-5/8 2.6240 2.6250 2.6250 2.6265 -0.0000 +0.0025 2.6230 2.6240 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.8998 2.9098 0.6250 0.4375 0.6250 0.6280 2.8060 2.8160
2-11/16 2.6865 2.6875 2.6875 2.6890 -0.0000 +0.0025 2.6855 2.6865 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 2.9632 2.9732 0.6250 0.4375 0.6250 0.6280 2.8694 2.8794
2-3/4 2.7490 2.7500 2.7500 2.7515 -0.0000 +0.0025 2.7480 2.7490 -0.0000 -0.0020 0.6250 0.6250 0.6250 0.6280 3.0265 3.0365 0.6250 0.4375 0.6250 0.6280 2.9328 2.9428
2-13/16 2.8115 2.8125 2.8125 2.8140 -0.0000 +0.0025 2.8105 2.8115 -0.0000 -0.0020 0.7500 0.7500 0.7500 0.7530 3.1366 3.1466 0.7500 0.5000 0.7500 0.7530 3.0116 3.0216
2-7/8 2.8740 2.8750 2.8750 2.8765 -0.0000 +0.0025 2.8730 2.8740 -0.0000 -0.0020 0.7500 0.7500 0.7500 0.7530 3.2002 3.2102 0.7500 0.5000 0.7500 0.7530 3.0752 3.0852
2-15/16 2.9365 2.9375 2.9375 2.9390 -0.0000 +0.0025 2.9355 2.9365 -0.0000 -0.0020 0.7500 0.7500 0.7500 0.7530 3.2638 3.2738 0.7500 0.5000 0.7500 0.7530 3.1388 3.1488
3 2.9990 3.0000 3.0000 3.0015 -0.0000 +0.0025 2.9980 2.9990 -0.0000 -0.0020 0.7500 0.7500 0.7500 0.7530 3.3274 3.3374 0.7500 0.5000 0.7500 0.7530 3.2024 3.2124
3 - 4 (incl.) -0.0010 +0.0000 3 - 4 (incl.) -0.0000 +0.0025 -0.0030 -0.0015 -0.0005 -0.0030 0.7500 0.7500 0.7500 0.7530 0.7500 0.5000 0.7500 0.7530
3-1/16 3.0615 3.0625 3.0625 3.0640 -0.0000 +0.0025 3.0595 3.0610 -0.0005 -0.0030 0.7500 0.7500 0.7500 0.7530 3.3909 3.4009 0.7500 0.5000 0.7500 0.7530 3.2659 3.2759
3-1/8 3.1240 3.1250 3.1250 3.1265 -0.0000 +0.0025 3.1220 3.1235 -0.0005 -0.0030 0.7500 0.7500 0.7500 0.7530 3.4543 3.4643 0.7500 0.5000 0.7500 0.7530 3.3293 3.3393
3-3/16 3.1865 3.1875 3.1875 3.1890 -0.0000 +0.0025 3.1845 3.1860 -0.0005 -0.0030 0.7500 0.7500 0.7500 0.7530 3.5178 3.5278 0.7500 0.5000 0.7500 0.7530 3.3928 3.4028
3-1/4 3.2490 3.2500 3.2500 3.2515 -0.0000 +0.0025 3.2470 3.2485 -0.0005 -0.0030 0.7500 0.7500 0.7500 0.7530 3.5811 3.5911 0.7500 0.5000 0.7500 0.7530 3.4561 3.4661
3-5/16 3.3115 3.3125 3.3125 3.3140 -0.0000 +0.0025 3.3095 3.3110 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 3.6912 3.7012 0.8750 0.6250 0.8750 0.8780 3.5662 3.5762
3-3/8 3.3740 3.3750 3.3750 3.3765 -0.0000 +0.0025 3.3720 3.3735 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 3.7548 3.7648 0.8750 0.6250 0.8750 0.8780 3.6298 3.6398
3-7/16 3.4365 3.4375 3.4375 3.4390 -0.0000 +0.0025 3.4345 3.4360 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 3.8184 3.8284 0.8750 0.6250 0.8750 0.8780 3.6934 3.7034
3-1/2 3.4990 3.5000 3.5000 3.5015 -0.0000 +0.0025 3.4970 3.4985 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 3.8819 3.8919 0.8750 0.6250 0.8750 0.8780 3.7569 3.7669
3-9/16 3.5615 3.5625 3.5625 3.5640 -0.0000 +0.0025 3.5595 3.5610 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 3.9454 3.9554 0.8750 0.6250 0.8750 0.8780 3.8204 3.8304
3-5/8 3.6240 3.6250 3.6250 3.6265 -0.0000 +0.0025 3.6220 3.6235 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 4.0089 4.0189 0.8750 0.6250 0.8750 0.8780 3.8839 3.8939
3-11/16 3.6865 3.6875 3.6875 3.6890 -0.0000 +0.0025 3.6845 3.6860 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 4.0723 4.0823 0.8750 0.6250 0.8750 0.8780 3.9473 3.9573
3-3/4 3.7490 3.7500 3.7500 3.7515 -0.0000 +0.0025 3.7470 3.7485 -0.0005 -0.0030 0.8750 0.8750 0.8750 0.8780 4.1357 4.1457 0.8750 0.6250 0.8750 0.8780 4.0107 4.0207
3-13/16 3.8115 3.8125 3.8125 3.8140 -0.0000 +0.0025 3.8095 3.8110 -0.0005 -0.0030 1.0000 1.0000 1.0000 1.0030 4.2458 4.2558 1.0000 0.7500 1.0000 1.0030 4.1208 4.1308
3-7/8 3.8740 3.8750 3.8750 3.8765 -0.0000 +0.0025 3.8720 3.8735 -0.0005 -0.0030 1.0000 1.0000 1.0000 1.0030 4.3094 4.3194 1.0000 0.7500 1.0000 1.0030 4.1844 4.1944
3 -15/16 3.9365 3.9375 3.9375 3.9390 -0.0000 +0.0025 3.9345 3.9360 -0.0005 -0.0030 1.0000 1.0000 1.0000 1.0030 4.3729 4.3829 1.0000 0.7500 1.0000 1.0030 4.2479 4.2579
—
Engineering
Nominal Shaft
diameter Hub Hub Scribe Scribe
diameter
4 3.9990 4.0000 4.0000 4.0015 -0.0000 +0.0025 3.9970 3.9985 -0.0005 -0.0030 1.0000 1.0000 1.0000 1.0030 4.4365 4.4465 1.0000 0.7500 1.0000 1.0030 4.3115 4.3215
4 - 5 (incl.) -0.0010 +0.0000 4 - 5 (incl.) -0.0000 +0.0025 -0.0035 -0.0020 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 1.0000 0.7500 1.0000 1.0030
4-1/16 4.0615 4.0625 4.0625 4.0640 -0.0000 +0.0025 4.0590 4.0605 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.5000 4.5100 1.0000 0.7500 1.0000 1.0030 4.3750 4.3850
4-1/8 4.1240 4.1250 4.1250 4.1265 -0.0000 +0.0025 4.1215 4.1230 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.5635 4.5735 1.0000 0.7500 1.0000 1.0030 4.4385 4.4485
4-3/16 4.1865 4.1875 4.1875 4.1890 -0.0000 +0.0025 4.1840 4.1855 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.6269 4.6369 1.0000 0.7500 1.0000 1.0030 4.5019 4.5119
4-1/4 4.2490 4.2500 4.2500 4.2515 -0.0000 +0.0025 4.2465 4.2480 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.6903 4.7003 1.0000 0.7500 1.0000 1.0030 4.5653 4.5753
4-5/16 4.3115 4.3125 4.3125 4.3140 -0.0000 +0.0025 4.3090 4.3105 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.7537 4.7637 1.0000 0.7500 1.0000 1.0030 4.6287 4.6387
4-3/8 4.3740 4.3750 4.3750 4.3765 -0.0000 +0.0025 4.3715 4.3730 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.8171 4.8271 1.0000 0.7500 1.0000 1.0030 4.6921 4.7021
4-7/16 4.4365 4.4375 4.4375 4.4390 -0.0000 +0.0025 4.4340 4.4355 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.8804 4.8904 1.0000 0.7500 1.0000 1.0030 4.7554 4.7654
4-1/2 4.4990 4.5000 4.5000 4.5015 -0.0000 +0.0025 4.4965 4.4980 -0.0010 -0.0035 1.0000 1.0000 1.0000 1.0030 4.9437 4.9537 1.0000 0.7500 1.0000 1.0030 4.8187 4.8287
4-9/16 4.5615 4.5625 4.5625 4.5640 -0.0000 +0.0025 4.5590 4.5605 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.1002 5.1102 1.2500 0.8750 1.2500 1.2535 4.9127 4.9227
4-5/8 4.6240 4.6250 4.6250 4.6265 -0.0000 +0.0025 4.6215 4.6230 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.1639 5.1739 1.2500 0.8750 1.2500 1.2535 4.9764 4.9864
4-11/16 4.6865 4.6875 4.6875 4.6890 -0.0000 +0.0025 4.6840 4.6855 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.2276 5.2376 1.2500 0.8750 1.2500 1.2535 5.0401 5.0501
4-3/4 4.7490 4.7500 4.7500 4.7515 -0.0000 +0.0025 4.7465 4.7480 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.2913 5.3013 1.2500 0.8750 1.2500 1.2535 5.1038 5.1138
4-13/16 4.8115 4.8125 4.8125 4.8140 -0.0000 +0.0025 4.8090 4.8105 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.3549 5.3649 1.2500 0.8750 1.2500 1.2535 5.1674 5.1774
4-7/8 4.8740 4.8750 4.8750 4.8765 -0.0000 +0.0025 4.8715 4.8730 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.4185 5.4285 1.2500 0.8750 1.2500 1.2535 5.2310 5.2410
4-15/16 4.9365 4.9375 4.9375 4.9390 -0.0000 +0.0025 4.9340 4.9355 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.4821 5.4921 1.2500 0.8750 1.2500 1.2535 5.2946 5.3046
5 4.9990 5.0000 5.0000 5.0015 -0.0000 +0.0025 4.9965 4.9980 -0.0010 -0.0035 1.2500 1.2500 1.2500 1.2535 5.5456 5.5556 1.2500 0.8750 1.2500 1.2535 5.3581 5.3681
5 - 6-1/2 (incl.) -0.0010 +0.0000 5- 6 1/2 (incl.) -0.0000 +0.0025 -0.0040 -0.0025 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 1.2500 0.8750 1.2500 1.2535
5-1/16 5.0615 5.0625 5.0625 5.0640 -0.0000 +0.0025 5.0585 5.0600 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.6091 5.6191 1.2500 0.8750 1.2500 1.2535 5.4216 5.4316
5-1/8 5.1240 5.1250 5.1250 5.1265 -0.0000 +0.0025 5.1210 5.1225 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.6726 5.6826 1.2500 0.8750 1.2500 1.2535 5.4851 5.4951
5-3/16 5.1865 5.1875 5.1875 5.1890 -0.0000 +0.0025 5.1835 5.1850 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.7361 5.7461 1.2500 0.8750 1.2500 1.2535 5.5486 5.5586
5-1/4 5.2490 5.2500 5.2500 5.2515 -0.0000 +0.0025 5.2460 5.2475 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.7995 5.8095 1.2500 0.8750 1.2500 1.2535 5.6120 5.6220
5-5/16 5.3115 5.3125 5.3125 5.3140 -0.0000 +0.0025 5.3085 5.3100 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.8629 5.8729 1.2500 0.8750 1.2500 1.2535 5.6754 5.6854
5-3/8 5.3740 5.3750 5.3750 5.3765 -0.0000 +0.0025 5.3710 5.3725 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.9263 5.9363 1.2500 0.8750 1.2500 1.2535 5.7388 5.7488
5-7/16 5.4365 5.4375 5.4375 5.4390 -0.0000 +0.0025 5.4335 5.4350 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 5.9897 5.9997 1.2500 0.8750 1.2500 1.2535 5.8022 5.8122
5-1/2 5.4990 5.5000 5.5000 5.5015 -0.0000 +0.0025 5.4960 5.4975 -0.0015 -0.0040 1.2500 1.2500 1.2500 1.2535 6.0530 6.0630 1.2500 0.8750 1.2500 1.2535 5.8655 5.8755
5-9/16 5.5615 5.5625 5.5625 5.5640 -0.0000 +0.0025 5.5585 5.5600 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.2095 6.2195 1.5000 1.0000 1.5000 1.5035 5.9595 5.9695
5-5/8 5.6240 5.6250 5.6250 5.6265 -0.0000 +0.0025 5.6210 5.6225 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.2732 6.2832 1.5000 1.0000 1.5000 1.5035 6.0232 6.0332
5-11/16 5.6865 5.6875 5.6875 5.6890 -0.0000 +0.0025 5.6835 5.6850 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.3368 6.3468 1.5000 1.0000 1.5000 1.5035 6.0868 6.0968
5-3/4 5.7490 5.7500 5.7500 5.7515 -0.0000 +0.0025 5.7460 5.7475 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.4005 6.4105 1.5000 1.0000 1.5000 1.5035 6.1505 6.1605
5-13/16 5.8115 5.8125 5.8125 5.8140 -0.0000 +0.0025 5.8085 5.8100 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.4641 6.4741 1.5000 1.0000 1.5000 1.5035 6.2141 6.2241
5-7/8 5.8740 5.8750 5.8750 5.8765 -0.0000 +0.0025 5.8710 5.8725 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.5276 6.5376 1.5000 1.0000 1.5000 1.5035 6.2776 6.2876
5-15/16 5.9365 5.9375 5.9375 5.9390 -0.0000 +0.0025 5.9335 5.9350 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.5912 6.6012 1.5000 1.0000 1.5000 1.5035 6.3412 6.3512
6 5.9990 6.0000 6.0000 6.0015 -0.0000 +0.0025 5.9960 5.9975 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.6547 6.6647 1.5000 1.0000 1.5000 1.5035 6.4047 6.4147
6-1/16 6.0615 6.0625 6.0625 6.0640 -0.0000 +0.0025 6.0585 6.0600 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.7183 6.7283 1.5000 1.0000 1.5000 1.5035 6.4683 6.4783
6-1/8 6.1240 6.1250 6.1250 6.1265 -0.0000 +0.0025 6.1210 6.1225 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.7817 6.7917 1.5000 1.0000 1.5000 1.5035 6.5317 6.5417
6-3/16 6.1865 6.1875 6.1875 6.1890 -0.0000 +0.0025 6.1835 6.1850 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.8452 6.8552 1.5000 1.0000 1.5000 1.5035 6.5952 6.6052
6-1/4 6.2490 6.2500 6.2500 6.2515 -0.0000 +0.0025 6.2460 6.2475 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.9087 6.9187 1.5000 1.0000 1.5000 1.5035 6.6587 6.6687
6-5/16 6.3115 6.3125 6.3125 6.3140 -0.0000 +0.0025 6.3085 6.3100 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 6.9721 6.9821 1.5000 1.0000 1.5000 1.5035 6.7221 6.7321
6-3/8 6.3740 6.3750 6.3750 6.3765 -0.0000 +0.0025 6.3710 6.3725 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 7.0355 7.0455 1.5000 1.0000 1.5000 1.5035 6.7855 6.7955
6-7/16 6.4365 6.4375 6.4335 6.4350 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 7.0989 7.1089 1.5000 1.0000 1.5000 1.5035 6.8489 6.8589
6-1/2 6.4990 6.5000 6.4960 6.4975 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 7.1623 7.1723 1.5000 1.0000 1.5000 1.5035 6.9123 6.9223
6-1/2 - 7 (incl.) -0.0010 +0.0000 -0.0040 -0.0025 -0.0015 -0.0040 1.5000 1.5000 1.5000 1.5035 1.5000 1.0000 1.5000 1.5035
6-9/16 6.5615 6.5625 6.5585 6.5600 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.3187 7.3287 1.7500 1.5000 1.7500 1.7540 7.1937 7.2037
6-5/8 6.6240 6.6250 6.6210 6.6225 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.3823 7.3923 1.7500 1.5000 1.7500 1.7540 7.2573 7.2673
6-11/16 6.6865 6.6875 6.6835 6.6850 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.4460 7.4560 1.7500 1.5000 1.7500 1.7540 7.3210 7.3310
6-3/4 6.7490 6.7500 6.7460 6.7475 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.5096 7.5196 1.7500 1.5000 1.7500 1.7540 7.3846 7.3946
6-13/16 6.8115 6.8125 6.8085 6.8100 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.5732 7.5832 1.7500 1.5000 1.7500 1.7540 7.4482 7.4582
6-7/8 6.8740 6.8750 6.8710 6.8725 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.6368 7.6468 1.7500 1.5000 1.7500 1.7540 7.5118 7.5218
6-15/16 6.9365 6.9375 6.9335 6.9350 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.7003 7.7103 1.7500 1.5000 1.7500 1.7540 7.5753 7.5853
7 6.9990 7.0000 6.9960 6.9975 -0.0015 -0.0040 1.7500 1.7500 1.7500 1.7540 7.7639 7.7739 1.7500 1.5000 1.7500 1.7540 7.6389 7.6489
7 - 8 (incl.) -0.0010 +0.0000 -0.0050 -0.0030 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 1.7500 1.5000 1.7500 1.7540
7-1/16 7.0615 7.0625 7.0575 7.0595 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 7.8274 7.8374 1.7500 1.5000 1.7500 1.7540 7.7024 7.7124
7-1/8 7.1240 7.1250 7.1200 7.1220 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 7.8909 7.9009 1.7500 1.5000 1.7500 1.7540 7.7659 7.7759
7-3/16 7.1865 7.1875 7.1825 7.1845 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 7.9544 7.9644 1.7500 1.5000 1.7500 1.7540 7.8294 7.8394
31
diameter
7-1/4 7.2490 7.2500 7.2450 7.2470 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 8.0178 8.0278 1.7500 1.5000 1.7500 1.7540 7.8928 7.9028
7-5/16 7.3115 7.3125 7.3075 7.3095 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 8.0813 8.0913 1.7500 1.5000 1.7500 1.7540 7.9563 7.9663
7-3/8 7.3740 7.3750 7.3700 7.3720 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 8.1447 8.1547 1.7500 1.5000 1.7500 1.7540 8.0197 8.0297
7-7/16 7.4365 7.4375 7.4325 7.4345 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 8.2081 8.2181 1.7500 1.5000 1.7500 1.7540 8.0831 8.0931
7-1/2 7.4990 7.5000 7.4950 7.4970 -0.0020 -0.0050 1.7500 1.7500 1.7500 1.7540 8.2715 8.2815 1.7500 1.5000 1.7500 1.7540 8.1465 8.1565
7-9/16 7.5615 7.5625 7.5575 7.5595 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.4279 8.4379 2.0000 1.5000 2.0000 2.0040 8.1779 8.1879
7-5/8 7.6240 7.6250 7.6200 7.6220 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.4915 8.5015 2.0000 1.5000 2.0000 2.0040 8.2415 8.2515
7-11/16 7.6865 7.6875 7.6825 7.6845 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.5551 8.5651 2.0000 1.5000 2.0000 2.0040 8.3051 8.3151
7-3/4 7.7490 7.7500 7.7450 7.7470 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.6187 8.6287 2.0000 1.5000 2.0000 2.0040 8.3687 8.3787
7-13/16 7.8115 7.8125 7.8075 7.8095 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.6823 8.6923 2.0000 1.5000 2.0000 2.0040 8.4323 8.4423
7-7/8 7.8740 7.8750 7.8700 7.8720 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.7459 8.7559 2.0000 1.5000 2.0000 2.0040 8.4959 8.5059
7-15/16 7.9365 7.9375 7.9325 7.9345 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.8095 8.8195 2.0000 1.5000 2.0000 2.0040 8.5595 8.5695
8 7.9990 8.0000 7.9950 7.9970 -0.0020 -0.0050 2.0000 2.0000 2.0000 2.0040 8.8730 8.8830 2.0000 1.5000 2.0000 2.0040 8.6230 8.6330
8 - 9 (incl.) -0.0010 +0.0000 -0.0055 -0.0035 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 2.0000 1.5000 2.0000 2.0040
8-1/16 8.0615 8.0625 8.0570 8.0590 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 8.9365 8.9465 2.0000 1.5000 2.0000 2.0040 8.6865 8.6965
8-1/8 8.1240 8.1250 8.1195 8.1215 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.0000 9.0100 2.0000 1.5000 2.0000 2.0040 8.7500 8.7600
8-3/16 8.1865 8.1875 8.1820 8.1840 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.0635 9.0735 2.0000 1.5000 2.0000 2.0040 8.8135 8.8235
8-1/4 8.2490 8.2500 8.2445 8.2465 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.1270 9.1370 2.0000 1.5000 2.0000 2.0040 8.8770 8.8870
8-5/16 8.3115 8.3125 8.3070 8.3090 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.1904 9.2004 2.0000 1.5000 2.0000 2.0040 8.9404 8.9504
8-3/8 8.3740 8.3750 8.3695 8.3715 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.2538 9.2638 2.0000 1.5000 2.0000 2.0040 9.0038 9.0138
8-7/16 8.4365 8.4375 8.4320 8.4340 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.3173 9.3273 2.0000 1.5000 2.0000 2.0040 9.0673 9.0773
8-1/2 8.4990 8.5000 8.4945 8.4965 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.3807 9.3907 2.0000 1.5000 2.0000 2.0040 9.1307 9.1407
8-9/16 8.5615 8.5625 8.5570 8.5590 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.4441 9.4541 2.0000 1.5000 2.0000 2.0040 9.1941 9.2041
8-5/8 8.6240 8.6250 8.6195 8.6215 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.5075 9.5175 2.0000 1.5000 2.0000 2.0040 9.2575 9.2675
8-11/16 8.6865 8.6875 8.6820 8.6840 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.5708 9.5808 2.0000 1.5000 2.0000 2.0040 9.3208 9.3308
8-3/4 8.7490 8.7500 8.7445 8.7465 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.6342 9.6442 2.0000 1.5000 2.0000 2.0040 9.3842 9.3942
8-13/16 8.8115 8.8125 8.8070 8.8090 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.6975 9.7075 2.0000 1.5000 2.0000 2.0040 9.4475 9.4575
8-7/8 8.8740 8.8750 8.8695 8.8715 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.7609 9.7709 2.0000 1.5000 2.0000 2.0040 9.5109 9.5209
8-15/16 8.9365 8.9375 8.9320 8.9340 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.8242 9.8342 2.0000 1.5000 2.0000 2.0040 9.5742 9.5842
9 8.9990 9.0000 8.9945 8.9965 -0.0025 -0.0055 2.0000 2.0000 2.0000 2.0040 9.8875 9.8975 2.0000 1.5000 2.0000 2.0040 9.6375 9.6475
9 - 10 (incl.) -0.0010 +0.0000 -0.0060 -0.0040 -0.0030 -0.0060 2.0000 2.0000 2.0000 2.0040 2.0000 1.5000 2.0000 2.0040
9-1/16 9.0615 9.0625 9.0565 9.0585 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.1367 10.1467 2.5000 1.7500 2.5000 2.5040 9.7617 9.7717
9-1/8 9.1240 9.1250 9.1190 9.1210 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.2004 10.2104 2.5000 1.7500 2.5000 2.5040 9.8254 9.8354
9-3/16 9.1865 9.1875 9.1815 9.1835 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.2642 10.2742 2.5000 1.7500 2.5000 2.5040 9.8892 9.8992
9-1/4 9.2490 9.2500 9.2440 9.2460 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.3279 10.3379 2.5000 1.7500 2.5000 2.5040 9.9529 9.9629
9-5/16 9.3115 9.3125 9.3065 9.3085 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.3916 10.4016 2.5000 1.7500 2.5000 2.5040 10.0166 10.0266
9-3/8 9.3740 9.3750 9.3690 9.3710 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.4553 10.4653 2.5000 1.7500 2.5000 2.5040 10.0803 10.0903
9-7/16 9.4365 9.4375 9.4315 9.4335 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.5189 10.5289 2.5000 1.7500 2.5000 2.5040 10.1439 10.1539
9-1/2 9.4990 9.5000 9.4940 9.4960 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.5826 10.5926 2.5000 1.7500 2.5000 2.5040 10.2076 10.2176
9-9/16 9.5615 9.5625 9.5565 9.5585 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.6462 10.6562 2.5000 1.7500 2.5000 2.5040 10.2712 10.2812
9-5/8 9.6240 9.6250 9.6190 9.6210 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.7098 10.7198 2.5000 1.7500 2.5000 2.5040 10.3348 10.3448
9-11/16 9.6865 9.6875 9.6815 9.6835 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.7734 10.7834 2.5000 1.7500 2.5000 2.5040 10.3984 10.4084
9-3/4 9.7490 9.7500 9.7440 9.7460 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.8370 10.8470 2.5000 1.7500 2.5000 2.5040 10.4620 10.4720
9-13/16 9.8115 9.8125 9.8065 9.8085 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.9006 10.9106 2.5000 1.7500 2.5000 2.5040 10.5256 10.5356
9-7/8 9.8740 9.8750 9.8690 9.8710 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 10.9642 10.9742 2.5000 1.7500 2.5000 2.5040 10.5892 10.5992
9-15/16 9.9365 9.9375 9.9315 9.9335 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 11.0277 11.0377 2.5000 1.7500 2.5000 2.5040 10.6527 10.6627
—
Engineering
diameter
10 9.9990 10.0000 9.9940 9.9960 -0.0030 -0.0060 2.5000 2.5000 2.5000 2.5040 11.0912 11.1012 2.5000 1.7500 2.5000 2.5040 10.7162 10.7262
10 - 11 (incl.) -0.0010 +0.0000 -0.0065 -0.0045 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 2.5000 1.7500 2.5000 2.5040
10-1/16 10.0615 10.0625 10.0560 10.0580 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.1547 11.1647 2.5000 1.7500 2.5000 2.5040 10.7797 10.7897
10-1/8 10.1240 10.1250 10.1185 10.1205 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.2183 11.2283 2.5000 1.7500 2.5000 2.5040 10.8433 10.8533
10-3/16 10.1865 10.1875 10.1810 10.1830 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.2817 11.2917 2.5000 1.7500 2.5000 2.5040 10.9067 10.9167
10-1/4 10.2490 10.2500 10.2435 10.2455 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.3452 11.3552 2.5000 1.7500 2.5000 2.5040 10.9702 10.9802
10-5/16 10.3115 10.3125 10.3060 10.3080 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.4087 11.4187 2.5000 1.7500 2.5000 2.5040 11.0337 11.0437
10-3/8 10.3740 10.3750 10.3685 10.3705 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.4721 11.4821 2.5000 1.7500 2.5000 2.5040 11.0971 11.1071
10-7/16 10.4365 10.4375 10.4310 10.4330 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.5356 11.5456 2.5000 1.7500 2.5000 2.5040 11.1606 11.1706
10-1/2 10.4990 10.5000 10.4935 10.4955 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.5990 11.6090 2.5000 1.7500 2.5000 2.5040 11.2240 11.2340
10-9/16 10.5615 10.5625 10.5560 10.5580 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.6624 11.6724 2.5000 1.7500 2.5000 2.5040 11.2874 11.2974
10-5/8 10.6240 10.6250 10.6185 10.6205 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.7258 11.7358 2.5000 1.7500 2.5000 2.5040 11.3508 11.3608
10-11/16 10.6865 10.6875 10.6810 10.6830 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.7892 11.7992 2.5000 1.7500 2.5000 2.5040 11.4142 11.4242
10-3/4 10.7490 10.7500 10.7435 10.7455 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.8526 11.8626 2.5000 1.7500 2.5000 2.5040 11.4776 11.4876
10-13/16 10.8115 10.8125 10.8060 10.8080 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.9160 11.9260 2.5000 1.7500 2.5000 2.5040 11.5410 11.5510
10-7/8 10.8740 10.8750 10.8685 10.8705 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 11.9794 11.9894 2.5000 1.7500 2.5000 2.5040 11.6044 11.6144
10-15/16 10.9365 10.9375 10.9310 10.9330 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 12.0427 12.0527 2.5000 1.7500 2.5000 2.5040 11.6677 11.6777
11 10.9990 11.0000 10.9935 10.9955 -0.0035 -0.0065 2.5000 2.5000 2.5000 2.5040 12.1061 12.1161 2.5000 1.7500 2.5000 2.5040 11.7311 11.7411
11 - 12 (incl.) -0.0010 +0.0000 -0.0070 -0.0050 -0.0040 -0.0070 2.5000 2.5000 2.5000 2.5040 2.5000 1.7500 2.5000 2.5040
11-1/16 11.0615 11.0625 11.0555 11.0575 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.3552 12.3652 3.0000 2.0000 3.0000 3.0040 11.8552 11.8652
11-1/8 11.1240 11.1250 11.1180 11.1200 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.4189 12.4289 3.0000 2.0000 3.0000 3.0040 11.9189 11.9289
11-3/16 11.1865 11.1875 11.1805 11.1825 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.4826 12.4926 3.0000 2.0000 3.0000 3.0040 11.9826 11.9926
11-1/4 11.2490 11.2500 11.2430 11.2450 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.5463 12.5563 3.0000 2.0000 3.0000 3.0040 12.0463 12.0563
11-5/16 11.3115 11.3125 11.3055 11.3075 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.6100 12.6200 3.0000 2.0000 3.0000 3.0040 12.1100 12.1200
11-3/8 11.3740 11.3750 11.3680 11.3700 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.6736 12.6836 3.0000 2.0000 3.0000 3.0040 12.1736 12.1836
11-7/16 11.4365 11.4375 11.4305 11.4325 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.7373 12.7473 3.0000 2.0000 3.0000 3.0040 12.2373 12.2473
11-1/2 11.4990 11.5000 11.4930 11.4950 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.8009 12.8109 3.0000 2.0000 3.0000 3.0040 12.3009 12.3109
11-9/16 11.5615 11.5625 11.5555 11.5575 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.8645 12.8745 3.0000 2.0000 3.0000 3.0040 12.3645 12.3745
11-5/8 11.6240 11.6250 11.6180 11.6200 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.9281 12.9381 3.0000 2.0000 3.0000 3.0040 12.4281 12.4381
11-11/16 11.6865 11.6875 11.6805 11.6825 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 12.9917 13.0017 3.0000 2.0000 3.0000 3.0040 12.4917 12.5017
11-3/4 11.7490 11.7500 11.7430 11.7450 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 13.0553 13.0653 3.0000 2.0000 3.0000 3.0040 12.5553 12.5653
11-13/16 11.8115 11.8125 11.8055 11.8075 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 13.1188 13.1288 3.0000 2.0000 3.0000 3.0040 12.6188 12.6288
11-7/8 11.8740 11.8750 11.8680 11.8700 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 13.1824 13.1924 3.0000 2.0000 3.0000 3.0040 12.6824 12.6924
11-15/16 11.9365 11.9375 11.9305 11.9325 -0.0040 -0.0070 3.0000 3.0000 3.0000 3.0040 13.2459 13.2559 3.0000 2.0000 3.0000 3.0040 12.7459 12.7559
33
—
Engineering
ISO R775 metric bore and keyway fits
Nominal shaft Shaft diameter Clearance fit Transitional fit Interference fit Keyway
diameter (mm) Min. / Max. Hub bore Fit Hub bore Fit Hub bore Fit Nominal Width. D10 Scribe height
j6 F7 H7 M6 Width X Height Min Max Min Max
+0.008 / - 0.003 +0.016 / + 0.034 +0.008 / +0.037 0.000 / +0.018 -0.008 / +0.021 -0.015 / -0.004 -0.023 / -0.001
12 12.008 / 11.997 12.016 / 12.034 0.008 / 0.037 12.000 / 12.018 -0.008 / 0.021 11.985 / 11.996 -0.023 / -0.001 4 X 1.8 4.03 4.078 13.8 13.9
14 14.008 / 13.997 14.016 / 14.034 1.008 / 1.037 14.000 / 14.018 -0.008 / 0.021 13.985 / 13.996 -0.023 / -0.001 5 X 2.3 5.03 5.078 16.3 16.4
16 16.008 / 15.997 16.016 / 16.034 2.008 / 2.037 16.000 / 16.018 -0.008 / 0.021 15.985 / 15.996 -0.023 / -0.001 5 X 2.3 5.03 5.078 18.3 18.4
18 18.008 / 17.997 18.016 / 18.034 3.008 / 3.037 18.000 / 18.018 -0.008 / 0.021 17.985 / 17.996 -0.023 / -0.001 6 X 2.8 6.03 6.078 20.8 20.9
j6 F7 H7 M6
>18
+0.009 / -0.004 +0.02 / +0.041 +0.011 / +0.045 0.000 / +0.021 -0.009 / +0.025 -0.017 / -0.004 -0.026 / 0.000
19 19.009 / 18.996 19.02 / 19.041 0.011 / 0.045 19.000 / 19.021 -0.009 / 0.025 18.983 / 18.996 -0.026 / 0.000 6 X 2.8 6.03 6.078 21.8 21.9
20 20.009 / 19.996 20.02 / 20.041 0.011 / 0.045 20.000 / 20.021 -0.009 / 0.025 19.983 / 19.996 -0.026 / 0.000 6 X 2.8 6.03 6.078 22.8 22.9
22 22.009 / 21.996 22.02 / 22.041 0.011 / 0.045 22.000 / 22.021 -0.009 / 0.025 21.983 / 21.996 -0.026 / 0.000 6 X 2.8 6.03 6.078 24.8 24.9
24 24.009 / 23.996 24.02 / 24.041 0.011 / 0.045 24.000 / 24.021 -0.009 / 0.025 23.983 / 23.996 -0.026 / 0.000 8 X 3.3 8.04 8.098 27.3 27.5
25 25.009 / 24.996 25.02 / 25.041 0.011 / 0.045 25.000 / 25.021 -0.009 / 0.025 24.983 / 24.996 -0.026 / 0.000 8 X 3.3 8.04 8.098 28.3 28.5
28 28.009 / 27.996 28.02 / 28.041 0.011 / 0.045 28.000 / 28.021 -0.009 / 0.025 27.983 / 27.996 -0.026 / 0.000 8 X 3.3 8.04 8.098 31.3 31.5
30 30.009 / 29.996 30.02 / 30.041 0.011 / 0.045 30.000 / 30.021 -0.009 / 0.025 29.983 / 29.996 -0.026 / 0.000 8 X 3.3 8.04 8.098 33.3 33.5
k6 F7 H7 K6
>30
+0.018 / +0.002 +0.025 / +0.050 +0.007 / +0.048 0.000 / +0.025 -0.018 / +0.023 -0.013 / +0.003 -0.031 / +0.001
32 32.018 / 32.002 32.025 / 32.050 0.007 / 0.048 32.000 / 32.025 -0.018 / 0.023 31.987 / 32.003 -0.031 / 0.001 10 X 3.3 10.04 10.098 35.3 35.5
35 35.018 / 35.002 35.025 / 35.050 0.007 / 0.048 35.000 / 35.025 -0.018 / 0.023 34.987 / 35.003 -0.031 / 0.001 10 X 3.3 10.04 10.098 38.3 38.5
38 38.018 / 38.002 38.025 / 38.050 0.007 / 0.048 38.000 / 38.025 -0.018 / 0.023 37.987 / 38.003 -0.031 / 0.001 10 X 3.3 10.04 10.098 41.3 41.5
40 40.018 / 40.002 40.025 / 40.050 0.007 / 0.048 40.000 / 40.025 -0.018 / 0.023 39.987 / 40.003 -0.031 / 0.001 12 X 3.3 12.05 12.12 43.3 43.5
42 42.018 / 42.002 42.025 / 42.050 0.007 / 0.048 42.000 / 42.025 -0.018 / 0.023 41.987 / 42.003 -0.031 / 0.001 12 X 3.3 12.05 12.12 45.3 45.5
45 45.018 / 45.002 45.025 / 45.050 0.007 / 0.048 45.000 / 45.025 -0.018 / 0.023 44.987 / 45.003 -0.031 / 0.001 14 X 3.8 14.05 14.12 48.8 49
48 48.018 / 48.002 48.025 / 48.050 0.007 / 0.048 48.000 / 48.025 -0.018 / 0.023 47.987 / 48.003 -0.031 / 0.001 14 X 3.8 14.05 14.12 51.8 52
50 50.018 / 50.002 50.025 / 50.050 0.007 / 0.048 50.000 / 50.025 -0.018 / 0.023 49.987 / 50.003 -0.031 / 0.001 14 X 3.8 14.05 14.12 53.8 54
m6 F7 H7 K7
>50
+0.030 / +0.011 +0.030 / +0.060 0 / +0.049 0.000 / +0.030 -0.030 / +0.019 -0.021 / +0.009 -0.051 / -0.002
55 55.030 / 55.011 55.030 / 55.060 0.000 / 0.049 55.000 / 55.030 -0.030 / 0.019 54.979 / 55.009 -0.051 / -0.002 16 X 4.3 16.05 16.12 59.3 59.5
56 56.030 / 56.011 56.030 / 56.060 0.000 / 0.049 56.000 / 56.030 -0.030 / 0.019 55.979 / 56.009 -0.051 / -0.002 16 X 4.3 16.05 16.12 60.3 60.5
60 60.030 / 60.011 60.030 / 60.060 0.000 / 0.049 60.000 / 60.030 -0.030 / 0.019 59.979 / 60.009 -0.051 / -0.002 18 X 4.4 18.05 18.12 64.4 64.6
63 63.030 / 63.011 63.030 / 63.060 0.000 / 0.049 63.000 / 63.030 -0.030 / 0.019 62.979 / 63.009 -0.051 / -0.002 18 X 4.4 18.05 18.12 67.4 67.6
65 65.030 / 65.011 65.030 / 65.060 0.000 / 0.049 65.000 / 65.030 -0.030 / 0.019 64.979 / 65.009 -0.051 / -0.002 18 X 4.4 18.05 18.12 69.4 69.6
70 70.030 / 70.011 70.030 / 70.060 0.000 / 0.049 70.000 / 70.030 -0.030 / 0.019 69.979 / 70.009 -0.051 / -0.002 20 X 4.9 20.065 20.149 74.9 75.1
71 71.030 / 71.011 71.030 / 71.060 0.000 / 0.049 71.000 / 71.030 -0.030 / 0.019 70.979 / 71.009 -0.051 / -0.002 20 X 4.9 20.065 20.149 75.9 76.1
75 75.030 / 75.011 75.030 / 75.060 0.000 / 0.049 75.000 / 75.030 -0.030 / 0.019 74.979 / 75.009 -0.051 / -0.002 20 X 4.9 20.065 20.149 79.9 80.1
80 80.030 / 80.011 80.030 / 80.060 0.000 / 0.049 80.000 / 80.030 -0.030 / 0.019 79.979 / 80.009 -0.051 / -0.002 22 X 5.4 22.065 22.149 85.4 85.6
m6 F7 H7 M7
>80
+0.035 / +0.013 +0.036 / +0.071 +0.001 / +0.058 0.000 / +0.035 -0.035 / +0.022 -0.035 / 0.000 -0.070 / -0.013
85 85.035 / 85.013 85.036 / 85.071 0.001 / 0.058 85.000 / 85.035 -0.035 / 0.022 84.965 / 85.000 -0.070 / -0.013 22 X 5.4 22.065 22.149 90.4 90.6
90 90.035 / 90.013 90.036 / 90.071 0.001 / 0.058 90.000 / 90.035 -0.035 / 0.022 89.965 / 90.000 -0.070 / -0.013 25 X 5.4 25.065 25.149 95.4 95.6
95 95.035 / 95.013 95.036 / 95.071 0.001 / 0.058 95.000 / 95.035 -0.035 / 0.022 94.965 / 95.000 -0.070 / -0.013 25 X 5.4 25.065 25.149 100.4 100.6
100 100.035 / 100.013 100.036 / 100.071 0.001 / 0.058 100.000 / 100.035 -0.035 / 0.022 99.965 / 100.000 -0.070 / -0.013 28 X 6.4 28.065 28.149 106.4 106.6
m6 F7 H7 P7
>100
+0.035 / +0.013 +0.036 / +0.071 +0.001 / +0.058 0.000 / +0.035 -0.035 / +0.022 -0.059 / -0.024 -0.094 / -0.037
110 110.035 / 110.013 110.036 / 110.071 0.001 / 0.058 110.000 / 110.035 -0.035 / 0.022 109.941 / 109.976 -0.094 / -0.037 28 X 6.4 28.065 28.149 116.4 116.6
120 120.035 / 120.013 120.036 / 120.071 0.001 / 0.058 120.000 / 120.035 -0.035 / 0.022 119.941 / 119.976 -0.094 / -0.037 32 X 7.4 32.08 32.18 127.4 127.6
m6 F7 H7 P7
>120
+0.040 / +0.015 +0.043 / +0.083 +0.003 / +0.068 0.000 / +0.040 -0.040 / +0.025 -0.068 / -0.028 -0.108 / -0.043
125 125.040 / 125.015 125.043 / 125.083 0.003 / 0.068 125.000 / 125.04 -0.040 / 0.025 124.932 / 124.972 -0.108 / -0.043 32 X 7.4 32.08 32.18 132.4 132.6
130 130.040 / 130.015 130.043 / 130.083 0.003 / 0.068 130.000 / 130.04 -0.040 / 0.025 129.932 / 129.972 -0.108 / -0.043 32 X 7.4 32.08 32.18 137.4 137.6
140 140.040 / 140.015 140.043 / 140.083 0.003 / 0.068 140.000 / 140.04 -0.040 / 0.025 139.932 / 139.972 -0.108 / -0.043 36 X 8.4 36.08 36.18 148.4 148.7
150 150.040 / 150.015 150.043 / 150.083 0.003 / 0.068 150.000 / 150.04 -0.040 / 0.025 149.932 / 149.972 -0.108 / -0.043 36 X 8.4 36.08 36.18 158.4 158.7
160 160.040 / 160.015 160.043 / 160.083 0.003 / 0.068 160.000 / 160.04 -0.040 / 0.025 159.932 / 159.972 -0.108 / -0.043 40 X 9.4 40.08 40.18 169.4 169.7
170 170.040 / 170.015 170.043 / 170.083 0.003 / 0.068 170.000 / 170.04 -0.040 / 0.025 169.932 / 169.972 -0.108 / -0.043 40 X 9.4 40.08 40.18 179.4 179.7
180 180.040 / 180.015 180.043 / 180.083 0.003 / 0.068 180.000 / 180.04 -0.040 / 0.025 179.932 / 179.972 -0.108 / -0.043 45 X 10.4 45.08 45.18 190.4 190.7
m6 F7 H7 P7
>180
+0.046 / +0.017 +0.050 / +0.096 +0.004 / +0.079 0.000 / +0.046 -0.046 / +0.029 -0.079 / -0.033 -0.125 / -0.050
190 190.046 / 190.017 190.050 / 190.096 0.004 / 0.079 190.000 / 190.046 -0.046 / 0.029 189.921 / 189.967 -0.125 / -0.050 45 X 10.4 45.08 45.18 200.4 200.7
200 200.046 / 200.017 200.050 / 200.096 0.004 / 0.079 200.000 / 200.046 -0.046 / 0.029 199.921 / 199.967 -0.125 / -0.050 45 X 10.4 45.08 45.18 210.4 210.7
m6 F7 H7 R7
>200
+0.046 / +0.017 +0.050 / +0.096 +0.004 / +0.079 0.000 / +0.046 -0.046 / +0.029 -0.109 / -0.063 -0.155 / -0.080
210 210.046 / 210.017 210.050 / 210.096 0.004 / 0.079 210.000 / 210.046 -0.046 / 0.029 209.891 / 209.937 -0.155 / -0.080 50 X 11.4 50.08 50.18 221.4 221.7
220 220.046 / 220.017 220.050 / 220.096 0.004 / 0.079 220.000 / 220.046 -0.046 / 0.029 219.891 / 219.937 -0.155 / -0.080 50 X 11.4 50.08 50.18 231.4 231.7
225 225.046 / 225.017 225.050 / 225.096 0.004 / 0.079 225.000 / 225.046 -0.046 / 0.029 224.891 / 224.937 -0.155 / -0.080 50 X 11.4 50.08 50.18 236.4 236.7
m6 F7 H7 R7
>225
+0.046 / +0.017 +0.050 / +0.096 +0.004 / +0.079 0.000 / +0.046 -0.046 / +0.029 -0.113 / -0.067 -0.159 / -0.084
230 230.046 / 230.017 230.05 / 230.096 0.004 / 0.079 230.000 / 230.046 -0.046 / 0.029 229.887 / 229.933 -0.159 / -0.084 50 X 11.4 50.08 50.18 241.4 241.7
—
Engineering
— —
Temperature ratings High temperature adjustment factors
Element type Minimum Maximum (1) Temperature range Adjustment

Standard element -45°F 220°F 180°F - 200°F + 0.75
Armored element -45°F 220°F 201°F - 220°F + 1.0
(1) Reference high temperature adjustment factors for High temperature adjustment factors are only to be added to the standard system service
applications in excess of 180°F factors as needed. High temperature service factors are not included in the standard
application service factor in order to prevent oversizing coupling selections.
—
Bore ranges
Finished bore Taper-Lock QD

Coupling
size Minimum Max. Bushing Minimum Max. Bushing Minimum Max.
bore bore (1) size bore bore (2) size bore bore (2)
E2 - 1.188 - - - - - -
E3 0.375 1.375 1008 0.500 1.000 - - -
E4 0.375 1.750 1008 0.500 1.000 JA 0.500 1.250
E5 0.375 2.250 1108 0.500 1.125 SH 0.500 1.688
E10 0.375 2.750 1310 0.500 1.438 SDS 0.500 2.000
E20 0.750 3.375 1610 0.500 1.688 SK 0.500 2.625
E30 0.750 3.750 2012 0.500 2.125 SF 0.500 2.938
E40 0.750 4.875 2517 0.500 2.688 E 0.875 3.500
E50 1.125 5.250 2517 0.500 2.688 E 0.875 3.500
E60 1.125 5.500 3020 0.875 3.250 F 1.000 4.000
E70 1.375 5.875 3535 1.188 3.938 J 1.500 4.500
E80 1.875 7.875 4040 1.438 4.438 M 2.000 5.500
E100 2.500 8.750 4535 1.938 4.938 M 2.000 5.500
E120 2.875 9.750 5040 2.438 5.000 N 2.438 6.000
E140 3.250 12.500 7060 4.938 7.000 P 3.438 7.000
(1) Larger bore capacities available. Contact Dodge Engineering for additional details.
(2) With steel Dodge bushings and/or shallow keyway
— —
Torsional stiffness Elastomer chemical compatibility
Size Static torsional stiffness (in.-lbs./degree) Natural Armored Natural Armored

Substance Substance
E2 23 rubber element rubber element
E3 32 Acetic acids 2 3 Hydrobromic acid (40%) 1 2
E4 46 Acetic anhydride 2 3 Kerosene 3 2
E5 97 Alcohols, monohydric 2 nd Lacquers 3 3
E10 114 Ammonia anhydrous 3 2 Lead sufamate 2 nd
E20 120 ASTM A oils 3 1 Mineral oil 3 1
E30 275 Animal fast 3 2 Naphtha 3 2
E40 440 Benzene 3 3 Nickel chloride 1 3
E50 783 Carbonic acid 3 3 Nitric acid (10%) 1 3
E60 1,379 Calcium bisulfite 2 nd Ozone 3 1
E70 1,856 Chloracetone 2 3 Petroleum (<250°F) 3 2
E80 2,800 Chloroacetic acid 2 3 Potassium dichromate 2 1
E100 5,900 Copper sulphate 2 1 Salt water 1 2
E120 9,200 Corn oil 2 1 Silicone oils 1 1
E140 14,300 Diesel oil 3 2 Sulfuric acid (con.) 3 3
• Values are shown for an ambient temperature of 70° F Fuel oil 3 2 Vinegar 2 3
• Values are nominal and may vary by +/- 20% Gasoline 2 2 Zinc sulfate 2 2
• Torsional stiffness values are for both the standard
Ratings:
Natural Rubber and Armored Element
1 - Minor effect 2 - Moderate effect 3 - Severe effect nd - No data
35
Additional information
We reserve the right to make technical
changes or modify the contents of this
document without prior notice. With
regard to purchase orders, the agreed
particulars shall prevail. ABB does not
accept any responsibility whatsoever for
potential errors or possible lack of infor-
mation in this document.
We reserve all rights in this document

and in the subject matter and illustra-
tions contained therein. Any reproduc-
tion, disclosure to third parties or utili-
zation of its contents – in whole or in
parts – is forbidden without prior writ-
ten consent of ABB.
—
ABB Motors and Mechanical Inc.
5711 R.S. Boreham, Jr. Street
Fort Smith, AR 72901
Ph: 1.479.646.4711
Mechanical Power Transmission Support

Ph: 1.864.297.4800
new.abb.com/mechanical-power-transmission
9AKK2017-106583 05.2020 Litho 10,000
© Copyright 2020 ABB. All rights reserved.

Specifications subject to change without notice.

Raptor Coupling: Mechanic Al Power TR Ansmission

Uploaded by

Copyright:

Available Formats

Raptor Coupling: Mechanic Al Power TR Ansmission

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Raptor Coupling: Mechanic Al Power TR Ansmission

Uploaded by

Copyright:

Available Formats

—

Coupling maintenance and reliability should not monopolize your

The Raptor’s easy to assemble, patented split natural rubber element

*Not actual size

The Dodge Raptor utilizes a patented finite-

6 Comparative benchmark testing

Industry leading 5-year warranty

Superior natural rubber element

• Static conductive for grounding redundancy,

— Lower stiffness, longer driven equipment life

18 Results based on tested bending

Industry leading misalignment capabilities

When an elastomeric coupling is misaligned during

The Raptor provides accommodation of shaft

Attention to every detail

Competitor Grade 5 hex-head cap screw

Improved features, easier installation

• Split element for easy replacement without

Raptor’s slotted clamp rings offer more clearance at the bolt

A practical solution to spacer couplings

• One spacer element fits all standard ANSI and ISO

Armored elements for extra protection from harsh

Third-party ATEX certified

Flexible mounting options for any application

Torsional holding power Radial holding power

Torque method: Hp/100 method:

Factor ∆ Factor ∆ Factor ∆

Factor ∆ Factor ∆ Factor ∆

System service factor calculation

Driven S.F. + Driver S.F. Adder = System S.F.

** Add 0.5 to factor if without flywheel

Electric motor High torque Reciprocating engine number of cylinders

Outboard Inboard Hybrid

Max C(4) F(4)

Standard Armored Replacement Standard Armored Replacement

B C (BSE) B B C (BSE) B B C (BSE) B

Full spacer - outboard Half spacer - hybrid Half spacer - outboard

Standard (natural rubber) C (BSE)(4)(5) F(4)(5)

Bore Coupling size

Bore Coupling size

Bore Coupling size

Standard (natural rubber) C (BSE) F

Standard (natural rubber) C (BSE)(4)(5) F(4)(5)

Complete spacer element assemblies Replacement components

Element type Minimum Maximum (1) Temperature range Adjustment

Finished bore Taper-Lock QD

Size Static torsional stiffness (in.-lbs./degree) Natural Armored Natural Armored

We reserve all rights in this document

Mechanical Power Transmission Support

© Copyright 2020 ABB. All rights reserved.

You might also like