L45 эл схема
L45 эл схема
L45 эл схема
Engine start
Рисунок 1
Circuit diagram, engine start
Changes on ECU-2
Plug/PIN Feed
108/09 Fuse F23 with upstream Profet
102/11 Fuse F23 with upstream Profet
112/10 Profet
Рисунок 2
Circuit diagram, engine start (from serial number)
Component position
S1 Ignition start switch
S3 Steering column switch (drive switch)
ВНИМАНИЕ!
The engine can only be started if the drive switch S3 is in Neutral.
The fuse for the preheat system F100 is on the right of the engine bay.
Рисунок 4
The relays for glow time control K2 and start process K5, are in the battery box.
Рисунок 5
Рисунок 6
On L40B machines up to SN 1913000; 1923000 and L45B machines up to SN 1943000; 1953000 connectors X22, X23, X
27 are located on the bracket above the engine oil cooler housing.
Рисунок 7
Рисунок 8
ВНИМАНИЕ!
When the ignition key is turned to position "I", the engine shut-off magnet Y6 is activated.
On L40B machines from SN 1913001; 1923001 and L45B machines from SN 1943001; 1953001 connectors X22, X23, X
27 are located on the cover plate of the cylinder head cover.
Рисунок 9