WHITE PAPER

DECEMBER 2014
WHAT IS PHANTOM ?
PHANTOM is a new category of audio products in itself: it is an Implosive Sound Center.
It transforms the way you listen to music, with power and emotion. Anywhere inside your home.

At the heart of PHANTOM beats what made Devialet the most-awarded company in the
history of Audio: the ADH Intelligence®. This latter combines the refinement of Analog
(or Class A) amplification with the power of Digital (or Class D) amplification. The SAM
Processing® technology is then used to control the drive units to perfection, reproducing the
exact acoustic pressure recorded by the microphone.

Together, the ADH Intelligence® and SAM Processing® create the only engine in the world
capable of driving what makes PHANTOM implosive: the Heart Bass Implosion®.
The HBI® consists of two Devialet-exclusive high-excursion bass drivers, moving in perfect symetry
in order to create a sound that has a physical impact and a density never before achieved.

PHANTOM is the fruit of 10 years of Research and Development in the Devialet Laboratories,
and embodies close to 100 patents. Although extremely complex on the inside, PHANTOM is
the expression of simplicity and elegance on the outside. It is controlled by the revolutionnary
SPARK application and orchestrated with DIALOG, an intelligent audio router that creates a
new experience of multiple sound devices architecture.

There will be a before and an after PHANTOM, and this white paper describes why the audio
industry will never be the same again.
 DEVIALET’S ADH®

What is ADH® amplification? What are the benefits of ADH®?

ADH ® (Analog/Digital Hybrid) is the most significant invention in audio amplification in Thanks to the assistance of the class D amplifiers, the Class A is freed from the task of delivering
the last 40 years, and is the very reason why Devialet exists. much power and is made even more linear. As unexpected as it sounds, the class A is improved by
the presence of the class D amplifiers in the ADH® architecture.
The idea beyond ADH ® is to combine the two opposed technologies of amplification -
Analog and Digital, aiming to obtain the best of both worlds: the linearity and musicality of Another benefit is that the output impedance of the ADH® core is equal to the class A impedance
the most acclaimed analog amplifiers (class A) with the power, efficiency and compactness divided by the current ratio of about 1:1000 between the class A and the class D amplifiers.
of «digital» amplifiers (class D). That’s how an output impedance of about 1mΩ is achieved over the whole bandwidth, which is
important to maintain high performance while controlling loudspeakers presenting a complex load.
Although simple to explain, this hybridization rapidly proved to be extremely difficult
to realize, since it basically meant connecting two amplifiers in parallel. In the end, 3 The ADH® technology truly fulfills Devialet’s promise of a ‘Pure Analog Sound with Smart Digital
years of extensive research were needed to obtain a high power prototype with the best Power’. It offers the musical qualities of an outstanding class A amplifier, without usual weight,
performance on the market by a factor 10 to 1000. ADH ® actually overdelivered compared volume and heat generation. The class D amplifiers provide substantial power to the class A without
to its initial goal. compromising the sound quality; on the contrary the class A amplifier performs even better when
assisted by the class Ds.

How does ADH® work?

Devialet’s “Magic Wire”
ADH® operates through the following enslavement principle:
Just ahead of the ADH® amplification stage, another major technological advance from Devialet
|| A genuine class A amplifier directly connected to the speaker drives the output voltage: as the is used: the “Magic Wire”. The aim of the patented “Magic Wire” typology is to implement the DAC
master, it sets the sound of the whole ADH® core. That’s why what we hear is pure analog sound. (Digital to Analog Converter) at the core of the class A amplifier, in order to reduce the parasitic,
music-impeding phenomena - such as noise and distortion - to an absolute minimum.
|| Several class D amplifiers are added in parallel to provide the speaker with the current it requires to
sustain the output voltage. They act as slaves to the master class A amplifier, minimizing its workload. In practice, the output current of the highest performance DAC on the market (Texas Instrument
PCM179X series) is directly converted into high-voltage without any processing in between:
An illustration of this principle is the power steering of a car: the driver is setting the car direction, no operational amplifier, no current mirror. Instead, the very elaborate leak-less path of the
assisted by a powerful engine to help turn the wheels , making the driver’s job effortless and hence “Magic Wire” carries the original current of the DAC to an ultra-high linearity resistor (0.01%
more precise. precision), which operates the current/high-voltage conversion before entering into the class A.

A specific class A amplifier is required to fit in the ADH® core: although it is most of the time highly The magic comes from the fact that the guiding elements within the “Magic Wire” do not process
assisted by the class D amplifiers in providing current to set the ideal voltage to the speaker, it must the music, whilst providing high-voltage output. Besides, these guiding elements work at a stable
also be able to output a high current over a short period of time, and absorb the ripple current of the power rate, hence constant temperature, which reduces thermal distortion to a non-measurable
digital amplifiers. quantity. In a simplified view, the “Magic Wire” can be considered as the dream of every audiophile:
a straight wire with gain.
This is achieved by a very innovative scheme for the ultra-linear class A of the ADH® core, whose
level of performance compares with the best class A amplifiers on the market.
Miniaturization of the ADH® amplification Size reduction of ADH Intelligence® (drawn to scale)
In order to incorporate the ADH® amplification core inside PHANTOM, an extensive research
program has been led in order to reduce dramatically its physical size. The result is the ADH
Intelligence® ASIC, grouping both the “Magic Wire” and the Class A circuitries into a single
component (see diagram below).

This ASIC (Application Specific Integrated Circuit) is a custom-made silicon chip designed by
Devialet which presents the incredible advantage of preserving the extreme level of performance of
the ADH® amplification (0.001% Total Harmonic Distorsion), whilst reducing its size by a 200x factor
CLASS A
and its electrical consumption by a 10x factor.

Each ADH Intelligence® ASIC contains the equivalent of two differential-mode channels, which is
more than 1000 electrical components grouped into a single one. The thickness is also reduced to
less than 1mm now. As PHANTOM consists of four drive units, two ADH Intelligence® chips can be
found inside it.

MAGIC
ADH Intelligence® diagram WIRE

CLASS A

MAGIC
WIRE

200cm2 1cm2
1000 ELECTRONIC 1 ELECTRONIC
COMPONENTS COMPONENT
 SAM® block diagram

DEVIALET’S SAM®

What is SAM®?
After ADH Intelligence®, SAM® (Speaker Active Matching) is Devialet’s second technical revolution.
SAM® is the signal processing that allows the ADH Intelligence® to adapt its behaviour to the very
drive unit it is connected to.

Devialet’s SAM® consists in a processing of the audio signal in the digital domain, computed in the
Dual Core processor that takes place in PHANTOM ahead of the DAC and power amplifier section.
By taking into account the characteristics of the drive unit and its acoustic load, it allows to drive in
a very precise and controlled way. Through this is obtained an exact alignment between a recorded
music signal, and the pressure wave that reaches the listener’s ear.

How does SAM® work? What are the benefits of SAM®?

Where ADH® is the engine imposing the signal to the drive unit, SAM® is the processing that Devialet’s Speaker Active Matching® is a truly high-end audio signal processing. SAM® has a
allows this engine to adapt the signal by having in-depth understanding of the electroacoustic qualitative effect, rather than a quantitative one.
system’s behaviour.
By its principle, SAM® ensures that the acoustic response is at every instant an extremely faithful
SAM® acts on the driver’s motion by means of a novel processing of the audio signal that is image of the recorded signal ; this is true on transient signals (notes attacks, drums, …) as well as on
performed in the time domain, using a unique proprietary mathematical approach to reach an continuous signals (notes sustain, organ…).
acoustic performance that is close to perfection. It optimizes in real time the driver’s acoustic In particular, SAM® prevents any delay between bass and the rest of the spectrum, avoiding the effect
response, at every moment, on any signal. of the phase rotation at the vicinity of the natural low-frequency cut-off of the loudspeaker.

A mathematical model of the complete drive unit, accounting for the electrical, mechanical and Although SAM® is in nature and effect radically different from a bass boost, it actually increases
acoustical behavior is running in real time on PHANTOM’s internal processor. It computes for every the low-frequency extension of the woofer unit. Since SAM® technology ensures that the music
sample the exact voltage that has to be applied to the drive unit by the power amplifier, so that the waveform is reproduced exactly as it should in the time domain, even frequencies below the natural
acoustic pressure is a one-to-one image of the audio signal. loudspeaker cut-off are faithfully represented.

Other techniques aiming at loudspeaker optimization are commonly simply equalization This is of course done within the physical boundaries of what the different drivers can do:
performed in the frequency domain. They typically involve IIR or FIR filters and cannot reach the maximum excursion of the speaker driver, and maximum continuous power handling. These physical
same performance, being affected by such phenomena as extra phase rotation or time delay, limitations are accounted for in SAM® processing. As a result, SAM® is also an effective protection of
and in general sub-optimal performance on transients. the drivers, helping to prevent any damage to occur due to listening at high levels.
Effect of SAM® on woofer’ response
Sound pressure level (SAM OFF)
SAM® is implemented as a time-domain signal processing using unique patented mathematical
— Desired techniques, featuring:
— Obtained
|| zero latency
0.05 || no pre-echo
|| no feedback

Here are some of the key subjective, audible, benefits of SAM mentioned by listeners:

|| higher impact, particularly on transients | better sense of pace and music tempo
0 || better sound image
|| higher level of detail

-0.05 ADH Intelligence® and SAM Processing® complete diagram

0 0.05 0.1 0.15 0.2

Time [s]

Sound pressure level (SAM ON)

— Desired
— Obtained
0.05

0
The ADH Intelligence® and SAM Processing® represent the most advanced amplification system in
the audio market. Together, they allow the speaker they are connected to to reproduce the exact
acoustic pressure desired from the recording.

Devialet’s next challenge was then to create the perfect revolutionnary loudspeaker that would
-0.05 glorify these two technologies. And this is when the HBI® featured in PHANTOM comes in …

0 0.05 0.1 0.15 0.2

Time [s]
 HBI ®

DEVIALET’S HBI®

The Technical Challenge: Reproduce the whole audible spectrum

Since the creation of the company in 2007, Devialet’s ambition has been to bring high-end audio 120L 6L
performance into most homes, with a complete solution that in order to be adopted by most had to 30Hz-22kHz 16Hz-25kHz
produce the best music and movie experience in the world, in the most compact form factor.

The challenge was huge, and not unfamiliar to hi-fi enthusiasts: reproducing the full spectrum
of music in order to convey its emotional and physical impact. This required not only the best The Heart Bass Implosion® principle:
electronics, but also large loudspeakers. Electro-acoustics miniaturisation
The reason is simple: in order to reproduce low frequencies one needs to move air. Bass-rich It is commonly accepted, based on the laws of physics, that great loudspeakers have to be huge.
instruments are large: a double bass, an organ, a grand piano. Similarly, loudspeakers capable of Well the laws of physics cannot be changed, but sometimes there is a lot to gain by pushing them to
reproducing the scale of these instruments traditionally use very large speakers drivers, into very their very limits. A lot can be done if you don’t rely on existing technologies, but are willing and able
large speaker boxes. to develop new ones that serve your specific purpose. It is all a matter of going as far as is physically
possible, by looking at a given technical challenge with a new perspective.

We decided on a performance we wanted to achieve, to create the ultimate home audio experience
from a compact design, conveying the full music dynamics and physical impact:
The State of the Art before PHANTOM: Very large loudspeakers
|| 16Hz to 25kHz bandwidth, ± 2dB
Big sound needs big loudspeakers. This has been true for a hundred years, since the invention of || 20Hz to 20kHz bandwidth, ± 0.5dB
electrodynamic loudspeakers.
|| 105dB maximum SPL*
The most commonly used speaker acoustic loading principles are bass-reflex (also called vented)
The basic idea behind compact deep bass reproduction was to maximize the efficiency of the
designs, and sealed box designs.
electro-acoustic system at every level. The consequences of this logic are simple:
Vented designs suffer from energy cancellation at the lowest frequencies, below their resonance
frequency - it is called the acoustic short-circuit. Except for very large speakers, the scale often lacks || use sealed box architecture, for high efficiency at the lowest frequencies
scale and impact since the frequencies between 16Hz and 50Hz are not reproduced. || design the most efficient compact driver, with very long diaphragm excursion capability
|| use symetric low-frequency units so as to cancel mechanical vibrations
Sealed box design are more desirable when it comes to being able to reproduce very deep bass
without losing energy because of the acoustic short-circuit. But again, very large speakers are Working with our designers, we decided to settle on a very challenging acoustic volume of
needed in order to reproduce every music with its entire physical impact. maximum 2x3=6 liters, so as to keep PHANTOM within a very compact form factor. This volume
is 20x times smaller than what high-end audio speakers currently use to approach a similar deep
Typically, the high-end loudspeakers that can reproduce most of the audible spectrum inside a home bass performance.
have a very large internal acoustic volume of 100L to 200L! This is as big as a bath tub. Most people This of course created many realisation challenges. To name only one, the maximum air pressure
do not want to, or simply are not able to, fit this into their home. inside the enclosure is 20 times higher than in a conventional speaker box. This pressure is equivalent
to 174dB SPL,which is the acoustic pressure level associated with a rocket at launch...

* SPL stands for Sound Pressure Level ; 105dB SPL is the maximum legal sound level in
night clubs and live concerts
 PHANTOM’s unique acoustic architecture:
approaching the pulsating sphere
Diffraction Loss of a 24“ Cube Face (after Olson)

This is why we call our technology Heart Bass Implosion®: in order to create lifelike bass from such a
compact enclosure, PHANTOM speaker drivers need to be able to create and resist extremely high
pressure and vacuum inside the speaker box.
We tried to use in the early prototypes the most robust loudspeakers we could find in the market,
and the speaker drivers seemed to ‘implode’: the diaphragm fragmented itself into fractal shapes,
sucked in by the excessive force resisting the speaker’s intended displacement.

In order to realize this, we hired key engineers with very different and complementary expertise,
coming from various industries:

|| experts from the automotive industry, specialized in injection pumps, materials deformation
Diffraction Loss of a 24“ Sphere (after Olson)
modeling, automated assembly for high pressure devices
|| experts in micromechanics, specialized in designing and manufacturing high-precision metal parts
manufacturing for the watch industry
|| experts in high-efficiency professional loudspeakers, specialized in performance repeatability and
reliability for live stadium concerts

The result of this unique, blank sheet approach, is Devialet’s first HBI® woofer: a high efficiency, very
long stroke (26mm peak-to-peak) yet very compact driver. Four times more powerful than the best
woofers on the market of an equivalent diaphragm size, yet 6 times more compact and 6 times
lighter. Each woofer can move a mass of more than 30kg.

We wanted the sound of PHANTOM to be as natural as possible, with a wide dispersion across the
listening space, in order to match with modern enjoyment of music – which is rarely for one person
only, sitting at a clearly defined listening position.

Sound expands through space as spherical waves; a familiar example is the 2-D visualisation of the
shock wave created at the surface of a pond after having thrown in a stone: the wave created at the
pond’s surface expands in circles.

A perfect sphere is also the ideal shape when it comes to producing sound and spreading its
energy evenly in all directions. Whereas a speaker box is traditionally a parallelepiped (for cost of
manufacturing reasons, essentially), the works of Olson have shown as early as the 1940s that the
sphere is by far the best shape to avoid diffraction along the box surface.

Just like we need music instruments of different sizes in order to produce sound in specific
frequency ranges (a double-bass for the low frequencies, a small violin for the high frequencies),
transducers of different sizes are needed, in order to perform optimally in each frequency band:
multiway speaker boxes are the norm. In the case of PHANTOM, we wanted two symetric woofers for
low-frequencies, and a midrange and a tweeter to reproduce higher frequencies with perfect piston-
like behaviour.

The ideal sound source should though theoretically emit all audible sound from a single point in
space, so as to avoid direction-dependent interference to occur between different transducers.
This idea of a ‘point source’ is difficult to realize in practice, since the dimensions of the speaker
drivers, especially for the low-frequency ones, are far larger than a single point.

It can be approached though by a novel yet very simple design, using coaxial drivers for midrange
and tweeter, and diaphragms that are flush with the surface of a perfect sphere.
The result: a unique design entirely derived from the laws of acoustics, providing a combination of
the best bass reproduction and an optimal directivity pattern.
 SPARK &
DIALOG
HBI® Mechanical Integration
Having defined the key principles of the acoustic architecture was only the first step. Compatible with PHANTOM and the existing range of Devialet amplifiers comes a brand new
Designing a complete product that be mass-produced repeatably and reliably, intelligent audio router called DIALOG.
within the size and cost targets, took two full years. DIALOG creates a full wireless audio system in high resolution throughout your home, and can
control and synchronize up to 24 PHANTOMs. It is connected to your own internet router,
It could be the object of an entire book to detail the many mechanical challenges that were DIALOG can also directly access music from the cloud.
encountered during the product development. Let us cite only a few key facts that illustrate
the level of detail that is needed to make such an integration a success. Based on an extremely low-latency proprietary protocol realising 1,000,000 calls per second,
DIALOG allows multiple users to seamlessly control the music being played and edit a shared playlist
|| There is not a single wire in PHANTOM in real time. Every user contributes by making their music (stored on their mobile devices, or available
from the cloud through the music services they have suscribed to) available to other users hooked
|| There are only 10 parts/modules to assemble in order to make a PHANTOM up to the same DIALOG network.

|| The gasket that seals off the woofer enclosure has a diameter of 2.620mm, Thanks to the SPARK application, your PHANTOMs can be used alone as an independent music
and it is compressed by a force of 1.2 tons to ensure sealing system, or grouped in pairs as a classical stereo installation, or in a scalable mulichannel system
with 3, 4, 5 PHANTOMs or more …
The SPARK application also allows you to do live grouping, allowing to play different music in each
room, or fill the house with the same music for a big party.

DIALOG creates the most robust network on the market today, by combining 3 dual-band
Wi-Fi connexions, a 1Gbps Ethernet, and Power Line Communication of the latest generation.

Each PHANTOM has an optical Toslink input and is able to share this input signal with any other
PHANTOM on the network. Wired connectivity to the DIALOG network through a 1Gbps Ethernet
RJ-45 port is also available.

Based on the EVO® platform, DIALOG will integrate more and more music streaming services natively,
multichannel audio decoding, UPnP compatibility to access music from NAS devices, and much more …
PHANTOM TECHS SPECS DIALOG TECHS SPECS

PHANTOM SILVER PHANTOM

Implosive Sound Center Implosive Sound Center Power Power adapter Built-in

PERFORMANCE

Sound Pressure Level 99 dBSPL at 1 meter 105 dBSPL at 1 meter

Guest network Wi-Fi x Dual-band Wi-Fi
( a/b/g/n 2.4 GHz & 5GHz )
Amplification power 750 W peak 3000 W peak PHANTOM network Wi-Fi x Dual-band Wi-Fi
Networking
( a/b/g/n 2.4 GHz & 5GHz )
Bandwidth 16Hz to 25kHz ± 2dB, 20Hz to 20kHz ± 0,5dB
Ethernet 10/100/1000 ( Gigabit )
Digital Analog Converter Texas Instruments PCM1798 24bits/192kHz PLC Homeplug AV2

- 800MHz dual-core ARM Cortex-A9 MPCore processor, hard IP,

Processor and FPGA in a single Cyclone V System-On-Chip (SoC)
- 512 MB DDR3 Memory
Requires smartphone/
Power Supply Power supply with IEC 90-240 V~50/60Hz tablet/desktop software Yes
Compatibility
Technologies HBI® ; ADH® ; SAM® ; EVO® Supported OSs iOS 7+, Windows 7+, Android
4.4+, OS X 10.9+
CARACTERISTICS

- Weight: 10.5 kg
- Width: 253 mm
Size and weight
- Height: 255 mm Processor Quad-core processor 1 GHz
- Depth : 343 mm Memory 1GB ( RAM ) / 2GB ( Flash )
Processing unit
Synchronisation Devialet synchronisation module
- Composite body: ( for more than one Phantom )
- Internal skin: glass fiber filled polycabonate
Materials - External skin: ABS
- Aluminum central core
- Aluminum dome drivers

- White body RAL 9016 - White body RAL 9016

Colors and finish - Polished stainless steel side - Sand-blasted stainless steel side Optical: Input (Toslink)
- White dome drivers - Silver dome drivers Peripherals USB: Asynchronous audio output
FONCTIONNALITIES for Expert product line

Synchronization 1 to 24 PHANTOMs

Dual-band Wi-Fi (a/b/g/n 2.4 GHz & 5 GHz)

Ethernet RJ-45 10/100/1000 Mbps (Gigabit)
Connectivity
PLC Homeplug AV2
Toslink optical input (TV, blu-ray, video games console, ...)

Application SPARK

Supported OS Windows 7+, Mac OSX 10.9+ iOS 7+, Android 4.4+