Extended Range Twin Engine Operations (ETOPS)

Extended Range Twin Engine Operations - ETOPS
Q Aviation B.V.
Q-Aviation is manufacturer of Helideck Lighting Equipment for safe
and hazardous area.
ETOPS is not as recent as many would think with first flights taking place in 1919 with the crossing of Article Related
the Atlantic by a twin engined Vickers Vimy. Up till today these kind of flights are common practice and
are executed many times a day by numerous of operators and aircraft. A flight plan that is based upon Appendices
ETOPS regulations is divided into different segments and has certain entry, exit and critical points.
Although ETOPS has major advantages it still features some minor disadvantages that should be taken ETOPS diversion times
into account by the operator when commencing ETOPS certificated flight.
Articles
ETOPS History Airbus A300
ETOPS is the term created by the International Civil Aviation Organization (ICAO) which describes the Airbus A310
operation of twin engined aircraft on a route that contains a point further than one hour flying time Airbus A330
from an adequate diversion airport. This means that an aircraft should be able to land safely within one Boeing 777
hour at the approved one engine inoperative cruising speed (figure 1.1). Boeing 787
The original rules were set-up as early as 1936 and Images

were applied to all types of aircraft regardless of the Certified ETOPS aircraft
number of engines. This meant that all operations
were restricted to operate within an area that could
guarantee a maximum distance of 100 nautical miles
(nm) from an adequate airport. In these days, 100 nm
was about 60 minutes flying time for most twin engine
aircraft with one engine inoperative. These rules
formed the basis for the regulations as we know them
today. Today's twin engine aircraft have reliability and
safety features that are far beyond of those aircraft
operating in the early days which were much less Click for a large image
reliable and technically advanced. The development
of modern twin jet aircraft therefore required the
adjustment of present ETOPS rules in order to
accommodate the unique capabilities of these
aircraft. Especially North Atlantic routes could be Figure 1.1 General ETOPS
flown much more economically under 120-minute

ETOPS rules than it would under 60-minutes maximum
diversion time operations.
Overall, a 60 minute diversion time would require indirect routings thus an increase in fuel burn and Click for a large image
operating costs. Thereby, these routes would mean the use of en-route alternates which have limited
airport facilities and services and are subject to weather limitations that change frequently. However,
North Atlantic operations flown under 120-minute rule would permit operators to use the minimum
cost routings and enable the use of alternates that are properly equipped in order to service and
support an aircraft that has diverted.
Practical ETOPS
In order to illustrate just how restrictive the 60-minute ETOPS rule can be for a large twin engined
aircraft, the shortest route between London Heathrow (LHR) and New York, John F. Kennedy (JFK)
could be considered, under both 60-minute as 120-minute rules (figure 1.2). As can be seen from the
graph the 60-minute rule results in a longer flight time and an increase of fuel burn. It is obvious that Click for a large image
the extra fuel burn-off could be translated into an equivalent payload range gain and it is easy to
understand why it motivates airlines to operate under ETOPS. Additionally, ETOPS provides the
possibility for twin engined aircraft to operate routes which were previously denied to them under the
60-minutes rule. Eventually this means that a smaller twin could be used on routes between two city
pairs where passenger numbers are not economically viable for large aircraft to operate them. The
following images illustrate the range of a typical twin engined aircraft flying at 400 kts under different
ETOPS diversion times (click here). From this, it is clear what actually drives airlines to operate their
twin under ETOPS and what motivates aircraft manufacturers to anticipate on this.
http://www.dutchops.com/Portfolio_Marcel/Articles/Flight_Operations/ETOPS.htm 26/07/20, 11:36 PM

Page 1 of 2
Figure 1.2 London to New York under both 60 and 120 minute ETOPS rules
ETOPS Route Segments

Not only does the operator or aircraft it operates have to satisfy certain requirements, so does the way Helideck
in which a flight is planned and a certain route is flown. Before commencing flight, a flight plan has to
be build and filed which describes the route of flight in detail. In case of an ETOPS approved flight plan, Lighting
certain route segments and ETOPS points along the flight path should be determined. An ETOPS flight
requires the determination of the ETOPS Entry Point (EEP), ETOPS Exit Point (EXP), ETOPS Critical Equipment
Points (CP) and Points of Equal Time (PET).
The EEP is located at one hour flying time from the last adequate airport prior to entering the
ETOPS segment at the selected one-engine-out diversion speed schedule on the aircraft's
outbound route. This point actually marks the beginning of the ETOPS segment.
The EXP marks the end of the ETOPS segment and is marked by a point where the aircraft
leaves the area exceeding 60 minutes flying time at the approved one engine inoperative
speed from a suitable aerodrome for the last time on that particular route.
Q-Aviation is
The CP marks a point on the aircraft's flight path that is critical in terms of fuel. Usually the CP manufacturer of
is the last PET within the ETOPS segment.
Helideck Lighting
The PET's are points along the route, which are located at the same flying time from two suitable Equipment for
diversion airports. In general, these points are calculated either by a computerized flight planning
system or graphically on a navigation chart. safe and
hazardous area.
ETOPS Advantages & Disadvantages
Although ETOPS has many advantages for both operators as passengers it comes under certain
preconditions. First of all, flying under ETOPS means that there are additional Flight Operations costs
which are part of the required ETOPS crew training programs. Thereby, crews require route clearance
before being allowed to operate as ETOPS crew. Secondly, additional costs have to be made in order to
support and maintain required levels of airframe and propulsion reliability and the more restrictive
dispatch requirements of the ETOPS MEL. Eventually, there is always the risk for an operator to lose its
ETOPS approval. Authorities and manufacturers keep a close eye on aircraft reliability under ETOPS
conditions. This means that every problem or malfunction should be reported to the authorities and
the manufacturer. If they conclude that the operator has not kept itself at the required level of
reliability which is stated by ETOPS regulations, ETOPS approval could be withdrawn.
DutchOps.com Disclaimer Copyright © DutchOps.com 2012 - All rights reserved
http://www.dutchops.com/Portfolio_Marcel/Articles/Flight_Operations/ETOPS.htm 26/07/20, 11:36 PM

Page 2 of 2

Extended Range Twin Engine Operations (ETOPS)

Uploaded by

Copyright:

Available Formats

Extended Range Twin Engine Operations (ETOPS)

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Extended Range Twin Engine Operations (ETOPS)

Uploaded by

Copyright:

Available Formats

Extended Range Twin Engine Operations - ETOPS

The original rules were set-up as early as 1936 and Images

flown much more economically under 120-minute

http://www.dutchops.com/Portfolio_Marcel/Articles/Flight_Operations/ETOPS.htm 26/07/20, 11:36 PM

ETOPS Route Segments

http://www.dutchops.com/Portfolio_Marcel/Articles/Flight_Operations/ETOPS.htm 26/07/20, 11:36 PM

You might also like