Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Touch Screens: Acp Thinmanager Tech Notes

    Uploaded by

    S Karthi Keyan
    ThinManager supports many touch screens that can be easily configured through its Terminal Configuration Wizard. Touch screen modules need to match the controller make, not brand. Parameters like monitor number, right click time, and calibration hotkey can be set. Calibration can be initiated from ThinManager, a desktop menu, or via an ActiveX control. Allen-Bradley touch screens may require trying different drivers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Touch Screens: Acp Thinmanager Tech Notes

    Uploaded by

    S Karthi Keyan
    91 views3 pages
    ThinManager supports many touch screens that can be easily configured through its Terminal Configuration Wizard. Touch screen modules need to match the controller make, not brand. Parameters like monitor number, right click time, and calibration hotkey can be set. Calibration can be initiated from ThinManager, a desktop menu, or via an ActiveX control. Allen-Bradley touch screens may require trying different drivers.

    Original Description:

    LCD drivers

    Original Title

    TouchScreenDrivers

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ThinManager supports many touch screens that can be easily configured through its Terminal Configuration Wizard. Touch screen modules need to match the controller make, not brand. Parameters like monitor number, right click time, and calibration hotkey can be set. Calibration can be initiated from ThinManager, a desktop menu, or via an ActiveX control. Allen-Bradley touch screens may require trying different drivers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    91 views3 pages

    Touch Screens: Acp Thinmanager Tech Notes

    Uploaded by

    S Karthi Keyan
    ThinManager supports many touch screens that can be easily configured through its Terminal Configuration Wizard. Touch screen modules need to match the controller make, not brand. Parameters like monitor number, right click time, and calibration hotkey can be set. Calibration can be initiated from ThinManager, a desktop menu, or via an ActiveX control. Allen-Bradley touch screens may require trying different drivers.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ACP ThinManager Tech Notes

    Touch Screens
    Use the F1 button on any page of a ThinManager wizard to launch Help for that page.
    Visit www.thinmanager.com/technotes/ to download the manual, manual chapters, or the ThinManual.

    ThinManager supports a large number of touch screens. They are easily added on the Module page of the
    Terminal Configuration Wizard.

    Configuration in ThinManager

    Attach Module to Terminal Window and the Module Selection Page


    Once the proper touch screen module is added you can configure the parameters of the touch screen.

    Automation Control Products


    www.thinmanager.com
    Revised 2/8/2012
    Module Properties Page
    The configurable parameters include the Monitor Number for MultiMonitor thin clients, Right Click Hold Time
    to give the touch screen the right click function, and/or the Calibration Hot Key, and Calibration Hotkey
    assignment, among others.
    Touch Screen Controller
    The module needs to match the make of the touch screen controller, not the brand name of the monitor. The
    make of the monitor is incidental.
    USB Touch Screens
    Touch screen monitors that use USB to connect to the terminal should use the USB Touch Driver
    Touch Screen Modules
    These are the current modules for serial touch screen controllers:
    Arista ARP-16XXXAP-ACP Touch Screen Driver Hampshire TSHARC Touch Screen Driver
    CarrollTouch Touch Screen Driver MicroTouch Touch Screen Driver
    Contec Touch Screen Driver Panjit TouchSet Touch Screen Driver
    DMC TSC Series Touch Screen Driver PenMount Touch Screen Driver
    DMC Touch Screen Driver Ronics Touch Screen Driver
    Dynapro Touch Screen Driver Touch Control Touch Screen Driver
    eGalax Touch Screen Driver Touch International IR Touch Screen Driver
    Elographics Touch Screen Driver Xycom 33XX Touch Screen Driver
    Gunze AHL Touch Screen Driver Zytronic Touch Screen Driver

    ACP ThinManager Tech Notes – Touch Screens -2


    Calibration
    The calibration program can be initiated on the terminal by highlighting the terminal in the ThinManager tree
    and selecting Tools> Calibrate Touch Screen on the ThinManager menu.

    Calibration Tools in the Module Property Window


    The Touch Screen Module can be configured so that holding a touch for a number of seconds will initiate the
    calibration program. Use the Calibration Touch Down Time (seconds) parameter.
    The touch calibration can be initiated with a hot key if the Calibration Hotkey parameter is configured in the
    module.
    The Calibration program can be run from the Start menu of a desktop by selecting Start > All Programs >
    ACP > CalTouchScreen.
    The TermMon ActiveX control can be configured to initiate the calibration program from within an application.

    Note: Allen-Bradley touch screens use the PenMount touch screen controller in early models but are changed
    to the PanJit touch controller in later versions of the same series. If a new monitor doesn’t behave properly
    with the PenMount driver try using the PanJit driver.

    ACP ThinManager Tech Notes – Touch Screens -3

    You might also like