Scribd
Upload
155 views

Systems Classification - Tutorialspoint

The document discusses different classifications of systems: 1. Systems are classified as linear or nonlinear depending on whether they satisfy superposition and homogenate principles. Linear systems have outputs that are a linear combination of inputs. 2. Time-invariant systems have characteristics that do not change over time, while time-variant systems have characteristics that do change. 3. A system can be both linear and time-invariant/time-variant, resulting in it being classified as a linear time-invariant or linear time-variant system. 4. Systems are also classified as static or dynamic, causal or non-causal, invertible or non-invertible, and stable or unstable based on properties like whether they

Uploaded by

siva
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
155 views

Systems Classification - Tutorialspoint

The document discusses different classifications of systems: 1. Systems are classified as linear or nonlinear depending on whether they satisfy superposition and homogenate principles. Linear systems have outputs that are a linear combination of inputs. 2. Time-invariant systems have characteristics that do not change over time, while time-variant systems have characteristics that do change. 3. A system can be both linear and time-invariant/time-variant, resulting in it being classified as a linear time-invariant or linear time-variant system. 4. Systems are also classified as static or dynamic, causal or non-causal, invertible or non-invertible, and stable or unstable based on properties like whether they

Uploaded by

siva
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

7/4/2020 Systems Classification - Tutorialspoint

Systems Classification

Systems are classified into the following categories:


linear and Non-linear Systems
Time Variant and Time Invariant Systems
linear Time variant and linear Time invariant systems
Static and Dynamic Systems
Causal and Non-causal Systems
Invertible and Non-Invertible Systems
Stable and Unstable Systems

linear and Non-linear Systems

A system is said to be linear when it satisfies superposition and homogenate principles. Consider
two systems with inputs as x1(t), x2(t), and outputs as y1(t), y2(t) respectively. Then, according to
the superposition and homogenate principles,
T [a1 x1(t) + a2 x2(t)] = a1 T[x1(t)] + a2 T[x2(t)]

∴
∴,, T [a1 x1(t) + a2 x2(t)] = a1 y1(t) + a2 y2(t)

From the above expression, is clear that response of overall system is equal to response of
individual system.
Example:
(t) = x2(t)
Solution:
y1 (t) = T[x1(t)] = x12(t)
y2 (t) = T[x2(t)] = x22(t)
T [a1 x1(t) + a2 x2(t)] = [ a1 x1(t) + a2 x2(t)]2
Which is not equal to a1 y1(t) + a2 y2(t). Hence the system is said to be non linear.

Time Variant and Time Invariant Systems

A system is said to be time variant if its input and output characteristics vary with time. Otherwise,
the system is considered as time invariant.
The condition for time invariant system is:
https://www.tutorialspoint.com/signals_and_systems/systems_classification.htm 1/4
7/4/2020 Systems Classification - Tutorialspoint

y (n , t) = y(n-t)
The condition for time variant system is:

y (n , t) ≠
≠ y(n-t)

Where y (n , t) = T[x(n-t)] = input change


y (n-t) = output change
Example:
y(n) = x(-n)
y(n, t) = T[x(n-t)] = x(-n-t)
y(n-t) = x(-(n-t)) = x(-n + t)

∴
∴ y(n, t) ≠ y(n-t). Hence, the system is time variant.

linear Time variant (LTV) and linear Time Invariant (LTI) Systems

If a system is both linear and time variant, then it is called linear time variant (LTV) system.
If a system is both linear and time Invariant then that system is called linear time invariant (LTI)
system.

Static and Dynamic Systems

Static system is memory-less whereas dynamic system is a memory system.

Example 1: y(t) = 2 x(t)


For present value t=0, the system output is y(0) = 2x(0). Here, the output is only dependent upon
present input. Hence the system is memory less or static.

Example 2: y(t) = 2 x(t) + 3 x(t-3)


For present value t=0, the system output is y(0) = 2x(0) + 3x(-3).

Here x(-3) is past value for the present input for which the system requires memory to get this
output. Hence, the system is a dynamic system.

Causal and Non-Causal Systems

A system is said to be causal if its output depends upon present and past inputs, and does not
depend upon future input.
For non causal system, the output depends upon future inputs also.
Example 1: y(n) = 2 x(t) + 3 x(t-3)
For present value t=1, the system output is y(1) = 2x(1) + 3x(-2).
https://www.tutorialspoint.com/signals_and_systems/systems_classification.htm 2/4
7/4/2020 Systems Classification - Tutorialspoint

Here, the system output only depends upon present and past inputs. Hence, the system is causal.
Example 2: y(n) = 2 x(t) + 3 x(t-3) + 6x(t + 3)
For present value t=1, the system output is y(1) = 2x(1) + 3x(-2) + 6x(4) Here, the system output
depends upon future input. Hence the system is non-causal system.

Invertible and Non-Invertible systems

A system is said to invertible if the input of the system appears at the output.

Y(S) = X(S) H1(S) H2(S)

= X(S) H1(S) · 1
1
Since H2(S) = 1/( H1(S) )
(
(HH1
1((S
S)))
)

∴
∴,, Y(S) = X(S)

→
→ y(t) = x(t)

Hence, the system is invertible.

If y(t) ≠
≠ x(t), then the system is said to be non-invertible.

Stable and Unstable Systems

The system is said to be stable only when the output is bounded for bounded input. For a bounded
input, if the output is unbounded in the system then it is said to be unstable.
Note: For a bounded signal, amplitude is finite.

Example 1: y (t) = x2(t)


Let the input is u(t) (unit step bounded input) then the output y(t) = u2(t) = u(t) = bounded output.
Hence, the system is stable.

Example 2: y (t) = ∫
∫ x
x((t
t))d
dtt

https://www.tutorialspoint.com/signals_and_systems/systems_classification.htm 3/4
7/4/2020 Systems Classification - Tutorialspoint

Let the input is u (t) (unit step bounded input) then the output y(t) = ∫
∫ u
u((t
t))d
dtt = ramp signal

(unbounded because amplitude of ramp is not finite it goes to infinite when t →


→ infinite).

Hence, the system is unstable.

https://www.tutorialspoint.com/signals_and_systems/systems_classification.htm 4/4

You might also like