Corrugated Plate Interceptor: Applications For CPI Systems

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CORRUGATED PLATE

INTERCEPTOR
OVERVIEW
The Corrugated Plate Interceptor (CPI) is a high-rate oil/water
separator suited for a variety of industrial applications.

As in all JWC separation systems, CPI units are built for


operator friendliness. Simple maintenance, minimal moving
parts, and process resiliency are all hallmarks of JWC’s CPI
design approach.

CPI units can be fitted with a rotating skimmer (RS) or a static


skimmer (SS). Models are available in flow capacities up to
CPI with Static Pipe Skimmer
6,000 gpm and are constructed of 304 or 316 stainless steel.

Applications for CPI systems:


• Frac flowback
• Produced water
• Steam condensate
• Crude refineries
• Natural gas processors
• Blending terminals
• Truck and rail stations
• Distributors

www.frcsystems.com
1

6 2

5
4

CPI with Rotating Skimmer

SYSTEM DETAILS
1. Skimmer Assembly 4. Settled Sludge Outlet
2. Float Sludge Hopper 5. Settled Sludge Auger
3. Stainless Steel Tank 6. Effluent Clearwell

CPI (RS) Flow Rate Free Area Effective Area Dry Weight Wet Weight Dimensions
Model - gpm (m3/hr) - sq-ft (m2) - sq-ft (m2) - lbs (kg) - lbs (kg) - LxWxH (LxWxH in m)

CPI-1 24 (5,5) 5.5 (0,5) 32 (3) 960 (435) 1,880 (854) 6’10” x 3’ x 6’5” (2,08 x 1,22 x 1,96)
CPI-3 42 (9,5) 7 (0,65) 65 (6) 1,930 (875) 4,430 (2.010) 7’6” x 3’ x 7’10” (2,29 x 1,22 x 2,39)
CPI-5 82 (20) 15 (1,4) 129 (12) 3,200(1.454) 9,900 (4.500) 8’ x 8’ x 4’10” (2,62 x 2,44 x 2,80)
CPI-15 165 (37,5) 33 (3) 258 (24) 5,200(2.364) 19,000 (8.620) 9’ x 8’ x 10’4” (2,74 x 2,44 x 3,15)
CPI-30 330 (75) 52 (4,8) 517 (48) 6,800(3.090) 27,000 (12.250) 13’ x 8’ x 10’4” (3,78 x 2,44 x 3,15)
CPI-45 495 (112) 78 (7,2) 776 (72) 8,400(3.818) 37,500 (17.010) 16’4” x 8’ x 10’4” (4,98 x 2,44 x 3,15)
CPI-60 660 (150) 65 (6) 1,034 (96) 9,500(4.318) 48,000(21.818) 15’ x 8’ x 14’9” (4,37 x 2,44 x 4,50)
CPI-90 990 (225) 87 (8) 1,550 (144) 12,000(5.455) 64,900(29.500) 18’3” x 8’ x 14’9” (5,38 x 2,44 x 4,50)
CPI-120 1,320 (300) 108 (10) 2,067 (192) 15,000(6.818) 78,773 (35.730) 21’6” x 8’ x 14’9” (6,40 x 2,44 x 4,50)
CPI-150 1,650 (375) 130 (12) 2,584 (240) 19,600(8.909) 96,350 (43.705) 25’ x 8’ x 14’9” (7,36 x 2,44 x 4,50)
CPI-180 1,980 (450) 151 (14) 3,101(288) 22,500(10.227) 132,940 (60.300) 28’2” x 8’ x 14’9” (8,38 x 2,44 x 4,50)
* All models available in static skimmer (SS) or rotating skimmer (RS) configurations.
** Consult JWC Environmental as values may vary based on process circumstances

Headquarters Industrial Wastewater US Office Industrial Wastewater Canada Office


2850 S. Red Hill Ave., Suite 125 PO Box 3147 10 Sunray St #23B
Santa Ana, CA 92705 USA Cumming, GA 30028 USA Whitby, ON L1N9B5 Canada
toll free:  800.331.2277 phone:  770.534.3681 phone:  905.665.9330
phone:  949.833.3888 email: [email protected] email:  [email protected]
fax:  949.833.8858
email:  [email protected]

www.jwce.com
©2018 JWC Environmental. All rights reserved. JWC Environmental is not liable for damages that may result from any information provided in or omitted from this publication, under any circumstances. JWC Environmental
reserves the right to make adjustments to this publication at any time, without notices or obligation. Please check the JWC Environmental website (www.jwce.com) for the most up-to-date information or speak to your
local rep.
(FRC CPI-NA-JWCE-1218)

You might also like