Question 1
Question 1
Question text
Select one:
a. 14
b. 20
c. 12
d. 16
Question 2
Question text
Select one:
c. Homogeneous Only
d. Heterogeneous only
Question 3
Select one:
Question 4
Not yet answered
Question text
When you upload a photo from your camera to a social media site, what kind of path is the information
likely to travel?
Select one:
a. End device -> Modem -> Controller -> Your ISP -> Networks and Routers-> social media site's ISP ->
social media site's server
b. End device -> Controller -> Modem -> Your ISP -> Networks and Routers-> social media site's ISP ->
social media site's server
c. End device -> Controller -> Modem -> Your ISP -> Networks and Routers -> social media site's server ->
social media site's ISP
d. Controller -> Modem -> Your ISP -> Networks and Routers -> social media site's ISP -> social media
site's server -> End device
Question 5
Question text
Select one:
b. When it gets too hot, turn the fan on otherwise keep heating the room
Question 6
Question text
Bluetooth uses low power radio waves in the frequency range of …?
Select one:
a. 2.4 - 2.485Hz
b. 2.4 - 2.485GHz
c. 2.4 - 2.485MHz
Question 7
Question text
Select one:
a. C Languages
b. JAVA
c. Assembly Language
d. Any Language
Question 8
Question text
A function is a series of programming statements that can be called by name. Which command is called
once when the program starts:
Select one:
a. loop()
b. (output)
c. setup()
d. (input)
Question 9
Not yet answered
Question text
What protocol is good for communication of IoT devices with restricted power and low data rates over a
range of a few kilometres ?
Select one:
a. 4G
b. Zigbee
c. WiFi
d. Bluetooth
e. LoRaWAN
Question 10
Question text
Cloud Computing is a computing platform where people can have access to applications and computer
resources, as a service, from anywhere?
Select one:
a. False
b. True
The IoT increases the potential for machines to make smart decisions based on collected data, and to act
on them, leaving people (apart from the original programmers and those setting the parameters) out of
the loop. This is called M2M. Select an example of M2M from the descriptions below.
Select one:
a. Sensors on a bridge detect strain in bridge joints. Areas of concern are flagged with the maintenance
team who can respond to specific problems, rather than carrying out lengthy inspections.
b. A sensor on a milking cow indicates that she is moving in a way that suggests she in on heat and will
be receptive to insemination. She is placed on a watch list and the herd manager chooses to draught her
out, after milking, for insemination.
c. An autonomous ambulance on an emergency call approaches an intersection and communicates with
the signals to change the lights from red to green, to allow smooth passage through the intersection.
Question 12
Answer saved
Question text
Before your program “code” can be sent to the board, it needs to be converted into instructions that the
board understands. This process is called...
Select one:
a. Compile
b. Stop
c. Create Sketch
d. Serial Monitor
Question 13
Answer saved
Question text
Select one:
a. 32 bits
b. 128 bits
c. 256 bits
d. 64 bits
Question 14
Answer saved
If you need to increase the current through a resistor in a circuit, what would you do?
Select one:
Question 15
Answer saved
Question text
Select one:
a. Pin 8
b. Pin 10
c. Pin 7
d. Pin 13
void loop()
Select one:
a. A banana
b. {
d. A statement
Question 17
Answer saved
Question text
Which of the following is one of the ways IoT monitoring of dairy cows improves dairy farming?
Select one:
a. The system notices the cows that are unwell, so they are treated quicker, which speeds up recovery
time.
b. The system can sound alarms when cows roam into neighbouring paddocks.
c. The system tells you when cows are ready for milking, saving time spent on monitoring the herd.
d. The system results in more milk from the cows' udders for each milking.
Question 18
Answer saved
Question text
Select one:
a. Encryption
b. Firewall
c. Password
d. Firmware
Question 19
Answer saved
Question text
In an IoT smart home system, sensors are connected to the home power outlet and are required to
process some part of the collected data. What would be the best option to connect sensors to each
other, as well as a central location for Internet connection, where high data rate is required?
Select one:
a. Bluetooth
b. LoRa
c. 6LowPAN
d. WiFi
Question 20
Answer saved
Question text
Select one:
a. 16 bit
b. 34 bit
c. 32 bit
d. 64 bit
k bk 4.c 5c 6b 7a 8b 9e 10. K bk 11.c 12.a 13.b 14.a hay b quên r 15.d 16.c 17.a 18.d 19.d 20.c