Scribd Logo
Upload

Welcome to Scribd!

  • 161 views

    HDPE Blow Ineos-G50-100

    Uploaded by

    luisalbertolv
    Ineos G50-100 is a high density polyethylene copolymer developed for sheet extrusion, thermoforming and large part blowmolding. It has a density of 0.950 g/cc and a high load melt index of 10 g/10 min. The material has a tensile strength at break of 30.3 MPa, an elongation at break over 800%, and meets FDA requirements. Ineos G50-100 is suitable for blow molding and sheet extrusion applications in the US and Canada.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    HDPE Blow Ineos-G50-100

    Uploaded by

    luisalbertolv
    161 views2 pages
    Ineos G50-100 is a high density polyethylene copolymer developed for sheet extrusion, thermoforming and large part blowmolding. It has a density of 0.950 g/cc and a high load melt index of 10 g/10 min. The material has a tensile strength at break of 30.3 MPa, an elongation at break over 800%, and meets FDA requirements. Ineos G50-100 is suitable for blow molding and sheet extrusion applications in the US and Canada.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Ineos G50-100 is a high density polyethylene copolymer developed for sheet extrusion, thermoforming and large part blowmolding. It has a density of 0.950 g/cc and a high load melt index of 10 g/10 min. The material has a tensile strength at break of 30.3 MPa, an elongation at break over 800%, and meets FDA requirements. Ineos G50-100 is suitable for blow molding and sheet extrusion applications in the US and Canada.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    161 views2 pages

    HDPE Blow Ineos-G50-100

    Uploaded by

    luisalbertolv
    Ineos G50-100 is a high density polyethylene copolymer developed for sheet extrusion, thermoforming and large part blowmolding. It has a density of 0.950 g/cc and a high load melt index of 10 g/10 min. The material has a tensile strength at break of 30.3 MPa, an elongation at break over 800%, and meets FDA requirements. Ineos G50-100 is suitable for blow molding and sheet extrusion applications in the US and Canada.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    www.lookpolymers.com email : sales@lookpolymers.

    com

    Ineos G50-100 HDPE


    Category : Polymer , Thermoplastic , Polyethylene (PE) , HDPE

    Material Notes:
    Ineos G50-100 is a high molecular weight, high density polyethylene copolymer developed for sheet extrusion, thermoforming and large part
    blowmolding where the finished product demands outstanding physical performance. This material meets the Food and Drug
    Administration requirements of 21CFR 177.1520.

    Order this product through the following link:


    http://www.lookpolymers.com/polymer_Ineos-G50-100-HDPE.php

    Physical Properties Metric English Comments

    Density 0.950 g/cc 0.0343 lb/in³ ASTM D4883

    High Load Melt Index 10 g/10 min 10 g/10 min ASTM D1238

    Mechanical Properties Metric English Comments

    Hardness, Shore D 65 65 ASTM D2240

    Tensile Strength at Break 30.3 MPa 4400 psi 2 in/min.; ASTM D638

    Tensile Strength, Yield 26.2 MPa 3800 psi 2 in/min (50 mm/min); ASTM D-638

    Elongation at Break >= 800 % >= 800 % 2 in/min (50 mm/min); ASTM D-638

    Modulus of Elasticity 0.931 GPa 135 ksi ASTM D638

    Flexural Modulus 1.205 GPa 174.8 ksi Tangent-Method 1; ASTM D790

    Tensile Impact Strength 525 kJ/m² 250 ft-lb/in² Type L, ASTM D1822

    Thermal Properties Metric English Comments

    120 µm/m-°C 66.7 µin/in-°F


    CTE, linear ASTM D696
    @Temperature 20.0 @Temperature 68.0 °F
    °C

    Deflection Temperature at 0.46 MPa 70.0 °C 158 °F ASTM D648
    (66 psi)

    Vicat Softening Point 130 °C 266 °F ASTM D1525

    Brittleness Temperature <= -75.0 °C <= -103 °F ASTM D746

    Descriptive Properties Value Comments

    Process Blow Molding

    Sheet Extrusion

    1/2
    www.lookpolymers.com email : [email protected]

    Descriptive Properties Value Comments


    Region US & Canada Bamberger Polymers Distribution

    Contact Songhan Plastic Technology Co.,Ltd.


    Website : www.lookpolymers.com
    Email : [email protected]
    Tel : +86 021-51131842
    Mobile : +86 13061808058
    Skype : lookpolymers
    Address : United North Road 215,Fengxian District, Shanghai City,China

    2/2

    You might also like