Suren Machiraju and Suraj Gaurav

Power BI Data Analysis and Visualization

Suren Machiraju and
Suraj Gaurav
Power BI Data Analysis
and Visualization
ISBN 978-1-5474-1678-3
e-ISBN (PDF) 978-1-5474-0072-0
e-ISBN (EPUB) 978-1-5474-0074-4

Library of Congress Control Number: 2018949269

Bibliographic information published by the Deutsche Nationalbibliothek

The Deutsche Nationalbibliothek lists this publication in the Deutsche Nationalbibliografie;
detailed bibliographic data are available on the Internet at http://dnb.dnb.de.

© 2018 Suren Machiraju and Suraj Gaurav

Published by Walter de Gruyter Inc., Boston/Berlin
Printing and binding: CPI books GmbH, Leck
Typesetting: MacPS, LLC, Carmel

www.degruyter.com
With a deep sense of gratitude, I dedicate this book to my parents-in-law—Mrs.
Bhanu Bollapragada and Dr. B.K.B. Rao. Thank you for all the love and support.
—Surendra Machiraju

This book is dedicated to my parents and in-laws for their constant support and
inspiration.
—Suraj Gaurav

DOI 10.1515/9781547400720-201
About De|G PRESS

Five Stars as a Rule

De|G PRESS, the startup born out of one of the world’s most venerable publishers,
De Gruyter, promises to bring you an unbiased, valuable, and meticulously edited
work on important topics in the fields of business, information technology, com-
puting, engineering, and mathematics. By selecting the finest authors to present,
without bias, information necessary for their chosen topic for professionals, in
the depth you would hope for, we wish to satisfy your needs and earn our five-star
ranking.
In keeping with these principles, the books you read from De|G PRESS will
be practical, efficient and, if we have done our job right, yield many returns on
their price.
We invite businesses to order our books in bulk in print or electronic form as a
best solution to meeting the learning needs of your organization, or parts of your
organization, in a most cost-effective manner.
There is no better way to learn about a subject in depth than from a book that
is efficient, clear, well organized, and information rich. A great book can provide
life-changing knowledge. We hope that with De|G PRESS books you will find that
to be the case.

DOI 10.1515/9781547400720-202
Acknowledgments
We wish to acknowledge the contribution of Rahul Jain and Jennifer Curiak.
Rahul is an amazing technical editor and Jennifer does an amazing job of techni-
cal proofreading and cleaning the book up.
Thank you!
Suren Machiraju
Suraj Gaurav

DOI 10.1515/9781547400720-203
About the Authors

Suren Machiraju developed an innovative supply chain solution integrating

online stores with market makers and aggregators, founding Commercia Corpora-
tion in the late 1990s. Within one year, Microsoft acquired Commercia Corp, pro-
viding Suren the opportunity to lead the business-to-business (B2B) interopera-
bility team within the BizTalk business unit. Over the next six years, Machiraju’s
team delivered five releases of the BizTalk Server (2000–2006R2). Subsequently,
Machiraju led the BizTalk Rangers-Customer Advisory Group, and in two years, lit
up over twenty of the largest middleware deployments on the .NET stack.
In 2011, Suren collaborated to create the Azure Customer Advisory Team at
Microsoft. For five years, Machiraju led efforts in engaging enterprise custom-
ers, start-ups, and partners for architectural reviews and deployments of cloud/
hybrid cloud .NET and OSS applications on the Azure platform. The team pio-
neered solutions for the most challenging cloud projects producing dozens of
successful deployments.
In 2014, Suren accepted an appointment as a Technology Business Partner at
the Bill & Melinda Gates Foundation where he collaborates with leading nongov-
ernmental organizations and nonprofit partners in devising technical solutions
for some of the world’s most challenging social issues.
Machiraju holds a master’s degree in Mechanical Engineering from the Birla
Institute of Technology and Science in Pilani, India. He is a listed author of over
twenty patents in business software areas of B2B and Data Interchange Standards
and has published books and authored dozens of MSDN articles/technical blogs
on Azure and .NET. When he is not publishing blogs or presenting works to the
larger technical community, he is enjoying time with his family in the beautiful
Pacific Northwest and cheering on the Seahawks each Sunday.
“Please contact me if I can be of assistance in architecting your cloud-based
solution, collaborating in this space is one of my greatest passions”—Suren.
https://about.me/surenmachiraju

DOI 10.1515/9781547400720-204
xii   About the Authors

Suraj Gaurav started his career in 2000, at the height of the dot-com era. He
worked in a start-up, Asera, that was developing a revolutionary platform for
building business-to-business applications. In 2002, he moved to Seattle to work
for Microsoft. He spent almost ten years there and worked on various products
including BizTalk Server, the Commerce platform, and Office 365. He has in-depth
experience building enterprise-scale systems like BizTalk, to internet scale ser-
vices like Office 365. He also built the consumption-based billing platform serving
as the commerce engine for Azure.
Gaurav holds a bachelor’s degree in Computer Science from the Indian Insti-
tute of Technology, Kanpur, India. He is listed as an inventor in over twenty-five
patents. When he is not working, he can be found spending time with family and
enjoying the beautiful outdoor life of the Pacific Northwest.
About the Technical Reviewer
Jennifer Curiak specializes in Dynamics 365 implementations, agile coaching,
project management, business analysis, quality assurance, and technical writing.
She works to help teams in a variety of industries become more productive, com-
municate more effectively, and generally get stuff done.
A writer at heart, Curiak started her career as a technical writer for a soft-
ware company in 2000 and has evolved into designing solutions, managing QA
processes and resources, coaching large and small teams in agile development
practices, acting as scrum master, and working on Dynamics 365 customizations
and implementations. She was the technical reviewer on the book Administering,
Configuring, and Maintaining Microsoft Dynamics 365 in the Cloud in 2018, contin-
ues to write in-house technical documentation and end-user documentation, and
contributes to other professional publications.
Jennifer and her husband Mike live in Western Colorado and spend most of
their free time exploring empty and desolate areas of the West by mountain bike
and packraft. She can be contacted directly at [email protected].

Jennifer Curiak
C) 720-933-5587

DOI 10.1515/9781547400720-205
Foreword

It is with great pleasure that I write this foreword for Power BI Data Analysis and
Visualization authored by my friends—Suraj and Suren.
Data Analysis and Visualization is a vast horizon, especially in a world where
over 2,500,000,000 GB of digital data is created every day. With the advent of
IoT and automation that number is expected to grow exponentially. Leveraging
those immense amounts of data through Data Analysis and Visualization is a key
component to profitability.
In this book, Suraj and Suren focus on Microsoft’s Power BI and clearly
demonstrate to the readers via precise instructions how to build data visuals on a
variety of database and CRM applications. As a bonus, the reader also gets a tuto-
rial on embedding the visuals in an Azure Application. Integration of the Cortana
suite is indeed a multiplier.
My very best wishes to the authors and the community of readers.

John R. Girgis
PMP-Certified Project & Engineering Manager
https://www.linkedin.com/in/john-r-girgis-pmp-026a1720/

DOI 10.1515/9781547400720-206
Contents
Chapter 1: Introducing Data Visualization  1
Overview of Technology  1
Importance of Data Visualization  1
Data Visualization Tools  2
Understanding Power BI  2
Comparing Microsoft Power BI and Tableau  3
Key Features of Power BI  4
Sign Up for Free  5
Receive Data from Multiple Data Sources  5
Obtain Key Metrics of Your Business  5
Quick Insights  5
Data-Driven Decision Making from Anywhere  6
Advanced Features of Power BI  6
Embed Power BI Reports and Dashboards into a Web App  6
Real-Time Streaming  6
Support for Natural Language Query  6
Share Content Pack  7
Integration with Cortana  7
Variants of Power BI  7
Power BI Desktop  7
Power BI Service   30
Publishing a Report  38
Summary  41

Chapter 2: Power BI Azure Application  43

Embedding Power BI Reports into a Web App  43
Real-Time Streaming  47
Exploring Real-Time Streaming Datasets  47
Different Ways of Pushing Data  48
Viewing Real-Time Streaming of Data  48
Quick Insights  58
Summary  64

Chapter 3: Power BI on Microsoft Stack  65

Getting Data into Power BI from SQL Server  65
Using the Import Option  65
Using the DirectQuery Option  69

DOI 10.1515/9781547400720-207
xviii   Contents

Data Modeling  74
Creating Relationships Among Tables  74
Using Data Analysis Expressions  82
Using Calculated Columns  84
Using Calculated Tables  86
Creating a Report  88
Creating a Report Using the DirectQuery Option  89
Creating a Report Using the Import Option  95
Saving the Report  96
Publishing the Report  98
Gateway Setup  100
Understanding Gateways  100
Types of Gateways  100
Downloading and Installing the On-Premises Data Gateway  101
Configuring Gateway  107
Adding a Data Source  110
Natural Language Querying  116
Data Refresh in Power BI  123
Configuring Scheduled Refresh  124
Creating Content Packs  129
Power BI Integration with Cortana Suite  133
Creating a Cortana Answer Page and Publishing It  133
Enabling Cortana to Access the Dataset  136
Adding Power BI Credentials to Windows 10  140
Accessing the Report through Cortana  144
Summary  149

Chapter 4: Power BI on Open Source Stack  151

Integrating PostgreSQL with Power BI  151
Downloading and Installing Npgsql Connector  151
Getting Data into Power BI  155
Data Modeling  158
Creating Relationship between Tables  159
Data Analysis Expressions  162
Creating a Calculated Column  163
Creating a Report  165
Saving the Report  185
Publishing the Report  186
Data Refresh in Power BI  188
Setting Up Scheduled Refresh  189
 Contents   xix

Creating Content Packs  204

Summary  210

Chapter 5: Power BI on ERP Applications  211

Defining CRM  211
Functions of a CRM Solution  211
Microsoft Dynamics CRM  212
Benefits of Microsoft Dynamics CRM  212
Sign Up for Microsoft Dynamics CRM Online  213
Creating Sample Data for Dynamics CRM  217
Getting Data into Power BI  219
Creating Reports  222
Leads Revenue by Employee  222
Leads Revenue by Company  228
Loans by Category  230
Loans Summary  231
Deep Linking in Power BI  233
Adding a New User   233
Row-Level Security in Power BI  237
Defining Roles and Rules  238
Validating the Role within Power BI Desktop  240
Deploying the Report  242
Managing Security  242
Working with Members  244
Validating the Role within Power BI Service  246
Sharing the Report  247
Summary  249

Chapter 6: Conclusion  251
Introducing Data Visualization  251
Power BI Azure Application  252
Power BI on Microsoft Stack  252
Power BI on Open Source Stack  253
Power BI on ERP Applications  254

Index  255
Introduction
Broadly speaking, data visualization is a term used to describe a way of present-
ing raw or tabular data in a more easily understood visual context. With data
visualization, users trying to understand raw data can see relationships, trends,
and patterns in a more clear and easy to understand manner. As such, data visu-
alization can be used as an effective and efficient form of communication of the
state of a business for those who need and want to see deeper into the informa-
tion generated and captured by their business processes.
In its 2017 Report, Gartner estimates that by 2020, organizations that offer
users access to a curated catalog of internal and external data will realize twice the
business value from analytics investments than those that do not.
The most significant challenge for data visualization is accessing data. The
most critical business data is locked up in silos within ERP and Custom Applica-
tions. Who are the vendors that provide state of art Data Visualization Tools? How
does a Data Visualization Developer extract the data? This book provides you the
answers to these questions.

Who Should Read this Book?

1. Business Owners and IT Pros: By 2021, the number of users of modern busi-
ness intelligence (BI) and analytics platforms that are differentiated by smart
data discovery capabilities will grow at twice the rate of those that are not
and will deliver twice the business value.
2. Data Scientists: Through 2020, the number of citizen data scientists will
grow five times faster than the number of data scientists.
3. Data Analysts: By 2020, natural-language generation and artificial intelli-
gence will be a standard feature of 90 percent of modern BI platforms.
4. Enterprise Developers: By 2020, 50 percent of analytic queries will be
generated using search, natural-language processing or voice, or will be
auto-generated.
5. Enterprise Architects: By 2020, organizations that offer users access to a
curated catalog of internal and external data will realize twice the business
value from analytics investments than those that do not.

DOI 10.1515/9781547400720-208
xxii   Introduction

What Will You Learn?

–– Market survey of Data Visualization solutions

–– How to use the common and advanced Power BI features
–– How to deploy the embedded Power BI Dashboard as an Azure Application
–– How to build a modern Power BI solution with Microsoft SQL Server and
leverage Microsoft Stack including Cortana
–– How to build a visually gratifying Power BI solution on open source data
stores, that is, PostgreSQL
–– How to unlock enterprise secrets, such as spotlighting the most relevant busi-
ness trends by integrating Power BI with Dynamics CRM and using Natural
Language Queries to tease out trends.

We appreciate your investment in this book. We would love to hear from you so
that we may improve this and future offerings.
Chapter 1
Introducing Data Visualization

Overview of Technology

Data visualization is the concept of presenting data through visuals, such as info-
graphics, charts, Sparkline, and geographic maps, etc. The presentation of data
through visuals makes it more appealing to users and allows decision makers to
view data analytics in a visual or graphic format. It helps users to easily identify
difficult concepts or new patterns related to data. Data visualization tools help
to easily recognize patterns, trends, and correlations that are otherwise difficult
to see in textual data. In addition to interactive visuals, you can drill down into
charts and graphs to access the details of the information displayed. You can also
process data as per your requirements.

Importance of Data Visualization

It is easier for the human brain to process the graphical visual representation
of data versus textual information. For example, charts or graphs can represent
large complex data in a more clear and effective manner than in a spreadsheet
or textual report. Data visualization provides an efficient way to communicate
concepts in general.

Data visualization helps in:

–– Identifying areas of enhancement
–– Identifying factors that influence customer behavior
–– Defining a presentation place for the products
–– Forecasting sales volumes
–– Democratizing data and analytics
–– Presenting data-driven insights to all resources within an organization
–– Creating big data and advanced analytics projects
–– Interpreting complex algorithms easier than numerical outputs

DOI 10.1515/9781547400720-001
2   Chapter 1: Introducing Data Visualization

Data Visualization Tools

There are several data visualization tools available in the market. Some of them
are listed as follows:
– Microsoft Power BI (This book focuses on this tool.)
– Tableau
– Qlik

Understanding Power BI

Power BI is a business analytics reporting tool introduced by Microsoft to create

interactive business reports. It incorporates several analytics features to provide
business insights across an organization. Prior to Power BI, end-users were
dependent on information technology staff and database administrators for
creating business reports and dashboards. Now, end-users can create business
reports and dashboards on their own with the help of Power BI. The Power BI
Datasets feature allows users to represent data and create visualizations based on
the data. The concept of Power BI is illustrated in Figure 1.1.

Figure 1.1: Concept of Power BI

 Comparing Microsoft Power BI and Tableau   3

Comparing Microsoft Power BI and Tableau

Tableau and Microsoft Power BI are listed as the top competitors in the list of the
BI and data visualization tools. Both tools are easy to use and support a large
collection of visuals to present data in a visualized format.

Table 1.1 lists the comparison between Microsoft Power BI and Tableau on several
parameters:

Table 1.1: Comparison between Microsoft Power BI and Tableau

Parameter Data Visualization Tools

Microsoft Power BI Tableau

Overview Provides a full overview of the most Leverages data discovery for any
critical data of an organization. type of business user.
User interface Provides an easy-to-use interface Provides an easy-to-use interface.
like Excel.
Infrastructure support Provides better support than Provides limited infrastructure
Tableau. support.
Dashboards Provides scalable dashboards that Allows users to embed dashboards
allow users to select the desired into the available business applica-
visualization as a blueprint and use tions, such as SharePoint, for quick
the navigation to drag and drop data analysis.
data into the visualization.
Data sources Supports several data sources Supports several data connectors
such as SAP HANA, JSON, MySQL, including OLAP, NoSQL, Hadoop,
etc. It examines the relationship and cloud options. It examines the
between data sources automat- relationship between different data
ically when data is added from sources automatically when data
multiple sources. It also allows is added from multiple sources. It
users to connect to Microsoft Azure also allows users to apply changes
databases, third-party databases, to data links as per the require-
files and online services such as ments of the company.
Salesforce and Google Analytics.
Visualization support Helps in uploading the datasets Supports different types of visual-
easily. It provides numerous izations, including heat maps and
visualizations that can be selected line charts, etc. It helps in easily
by users as blueprints. Data for creating complex visualizations
the selected visualization can be through an interface without requir-
inserted from a sidebar. It also ing coding expertise. It also allows
allows users to use natural lan- users to use multiple data points in
guage queries for creating complex their data analysis.
visualizations. To perform data anal-
ysis, it supports 3,500 data points.
4   Chapter 1: Introducing Data Visualization

Table 1.1  (continued)

Parameter Data Visualization Tools

Microsoft Power BI Tableau

Customer/technical Provides technical support for Provides several options for

support both types of users having either technical support. For example,
the free Power BI account or paid a user can generate a support
Power BI account. Both types ticket directly through a phone
of users can generate support call, or by sending an email to
tickets. It provides in-depth doc- the customer portal. A user can
umentation to help novice and also utilize the knowledge-based
expert users through the step- repository, as per the sub-
by-step procedure of using Power scription category to which the
BI. It also provides a common software belongs. The community
community forum for its users. forum is also available for training
purposes.
Pricing Provides three subscription tiers Is available in three tiers includ-
including Desktop, Pro, and ing Tableau Desktop, Tableau
Premium. Power BI Desktop is Server, and Tableau Online.
free for individuals. Power BI Pro There are two editions of Tableau
costs $9.99 per user per month. Desktop including Personal
The pricing of Power BI Premium Edition and Professional Edition.
depends on the required capac- Tableau Desktop Personal Edition
ity. Power BI Premium is charged costs $35 per user per month.
a per node per month basis. Tableau Desktop Professional
Edition costs $70 per user per
month. Tableau Server costs
$35 per user per month. Tableau
Online costs $42 per user per
month.

Note
According to Gartner’s report, “Microsoft Power BI is a leader in the Magic Quadrant for Business
Intelligence and Analytics Platforms.”

Key Features of Power BI

As discussed earlier, Power BI is a data visualization and business intelligence

tool that allows business representatives to easily view the insights of their busi-
 Key Features of Power BI   5

ness in the form of interactive reports. Power BI provides several features. Some
key features are as listed below:
–– Free sign up
–– Ability to receive data from multiple data sources
–– Ability to obtain key metrics of your business
–– Quick insights
–– Data-driven decision making from anywhere

Sign Up for Free

One of the key features of any software is its cost. With Power BI, you can sign
up for free. There is no need to save your credit card details. You can also easily
monitor your data with the help of Power BI. You do not need any specialized
setup or training to start your work. You can also utilize a trial Power BI Pro
account to use the advanced features of Power BI. However, you will get only 10
GB space for the trial.

Receive Data from Multiple Data Sources

As discussed earlier, Power BI supports a large number of data sources including

SQL Server, PostgreSQL, Dynamics CRM, and many more. You can transfer data
into Power BI from these different data sources, analyze the collected data, and
create interactive reports based on the gathered data.

Obtain Key Metrics of Your Business

Power BI provides a complete view of the key metrics of a business irrespective

of the data source and the nature of data. You can get the complete view of your
business data that might be coming from Excel spreadsheets, cloud services, or
on-premises databases.

Quick Insights

The Quick Insights feature applies complex algorithms to a dataset in Power

BI and quickly identifies different subsets of the dataset within the specified
time frame.
6   Chapter 1: Introducing Data Visualization

Data-Driven Decision Making from Anywhere

As a business representative of an organization, you can manage your data from

anywhere. You can use touch-enabled apps available for different devices includ-
ing Windows, iOS, and Android. These apps can be used for accessing your orga-
nizational data.

Advanced Features of Power BI

In addition to the key features of Power BI, it also supports several advanced fea-
tures. Some of the advanced features of Power BI are as follows:
–– Ability to embed Power BI reports and dashboards into a Web App
–– Real-time streaming
–– Support for natural language query
–– Ability to share content pack
–– Ability to integrate with Cortana

Embed Power BI Reports and Dashboards into a Web App

One of the features of Power BI is the ability to embed your Power BI reports and
dashboards into a Web app. This can be accomplished with the help of APIs and
sample code available on a source repository like Git.

Real-Time Streaming

Real-time streaming is one of the advanced features of Power BI that helps users
to stream data in Power BI dashboards in real time. In other words, the visuals
pinned to Power BI dashboards are updated with the real-time data.

Support for Natural Language Query

One of the exciting features of Power BI is its support for natural language. You
can query Power BI in your natural language (English) and get results in the form
of visuals including charts and graphs. This feature is commonly termed as Q&A
as you query from Power BI and Power BI provides answers to your queries.
 Variants of Power BI   7

Share Content Pack

Previously you were only able to share reports with other users in your orga-
nization. However, now you can share a complete package of your dashboard,
report, and dataset with other users in your organization. This complete package
is termed as a content pack. You can create the content pack and publish it to the
team members. As you publish it, it becomes available in a centralized reposi-
tory called AppSource. This repository helps the team members to easily locate
reports and datasets published for them. All you need to create and access an
organizational content pack is a Power BI Pro account.

Integration with Cortana

Now, you can integrate your Power BI reports with Cortana, an exciting feature
of Windows 10 that quickly locates and lists the results to your queries made in
natural language. The integration with Cortana provides relevant information
directly from Power BI dashboards and reports. To use this feature, you need
to create a Cortana answer page in Power BI, an Azure Active Directory (Azure
AD)/Work or School account, and configure one or more datasets to be used
with Cortana.

Variants of Power BI

As discussed previously, Power BI is a business analytics service that allows users

to visualize and examine data quickly and efficiently. It provides user-friendly
dashboards, interactive reports, and powerful visualizations through which users
can be connected to a large number of data sources. There are two variants of
Power BI, which are:
–– Power BI Desktop
–– Power BI Service

Power BI Desktop

Power BI Desktop, as the name indicates, is an on-premises version of Power BI. It

allows users to build reports, queries, and data connections, etc. Users can easily
share reports with others in the organization. Power BI Desktop embeds data
8   Chapter 1: Introducing Data Visualization

modeling, visualizations, and Query engine. It integrates with Power BI Service,

which makes data insights easier to build and share.

Power BI Desktop is a flexible and dominant tool that allows data analysts to:
–– Connect to multiple data sources
–– Structure data in an intuitive manner
–– Create powerful data models
–– Create coherent visuals

Power BI Desktop makes the process of designing and creating business intelli-
gence reports simple and centralized.

Installing Power BI Desktop

As discussed in the previous section, Power BI Desktop is an on-premise solution.
To utilize Power BI Desktop, users need to download and install it onto a local
machine.

Perform the following steps to download and install Power BI Desktop:

1. Navigate to the following link:
https://www.microsoft.com/en-us/download/details.aspx?id=45331
2. Click the Download button, as shown in Figure 1.2.

Figure 1.2: Downloading Power BI Desktop

 Variants of Power BI   9

The Choose the download you want page appears.

3. Select the checkbox beside the file name in the File Name column accord-
ing to your system specification. If your system runs on the 32-bit operating
system, select the checkbox next to the PBIDesktop.msi file. Otherwise, select
the checkbox next to the PBIDesktop_x64.msi file.
4. Click the Next button, as shown in Figure 1.3.

Figure 1.3: Selecting a file

The selected file is downloaded. You need to double-click the file to start the
installation process. After double-clicking this file, the Microsoft Power BI
Desktop (x64) Setup wizard appears with the Welcome to the Microsoft Power
BI Desktop (x64) Setup Wizard page.
5. Click the Next button, as shown in Figure 1.4.
10   Chapter 1: Introducing Data Visualization

Figure 1.4: The Microsoft Power BI Desktop (x64) Setup wizard

The Microsoft Software License Terms page appears.

6. Read the license agreement.
7. Select the I accept the terms in the License Agreement checkbox.
8. Click the Next button to proceed to next page, as shown in Figure 1.5.

Figure 1.5: Accepting the license agreement

 Variants of Power BI   11

The Destination Folder page of the Microsoft Power BI Desktop (x64) Setup
wizard appears.
9. Enter the full path of the destination folder in the Install Microsoft Power BI
Desktop (x64) to text box.
10. Click the Next button, as shown in Figure 1.6.

Figure 1.6: Specifying the destination folder

Note
You can click the Change button to change the path of the destination folder.

The Ready to install Microsoft Power BI Desktop (x64) page of the Microsoft
Power BI Desktop (x64) Setup wizard appears.
11. Click the Install button, as shown in Figure 1.7.
12   Chapter 1: Introducing Data Visualization

Figure 1.7: Installing Microsoft Power BI Desktop

The Installing Microsoft Power BI Desktop (x64) page of the Microsoft Power
BI Desktop (x64) Setup wizard appears. This page displays the installation prog-
ress status, as shown in Figure 1.8.

Figure 1.8: The Installing Microsoft Power BI Desktop (x64) page

 Variants of Power BI   13

The Completed the Microsoft Power BI Desktop (x64) Setup Wizard page of
the Microsoft Power BI Desktop (x64) Setup wizard appears.
12. Select the Launch Microsoft Power BI Desktop checkbox to launch Power
BI Desktop.
13. Click the Finish button to finish the wizard, as shown in Figure 1.9.

Figure 1.9: Finishing the wizard

The user interface of Power BI Desktop appears, as shown in Figure 1.10.

14   Chapter 1: Introducing Data Visualization

Figure 1.10: User interface of Power BI Desktop

Connect to Data
Before connecting to data, you should sign in to Power BI as it helps in collating
Power BI Desktop and Power BI Service and allows them to work seamlessly. If
you do not have the Power BI account, you can create it for free.

Perform the following steps to connect to data from Power BI Desktop:

1. Launch Power BI Desktop. The user interface of Power BI Desktop appears.
2. Click the Sign in link. The Sign in dialog box appears.
3. Enter the email address linked to Power BI in the Email text box.
4. Click the Sign in button.

The Sign in to your account dialog box appears.

5. Enter the relevant password in the Enter Password text box.
6. Click the Sign in button. Now, you are signed into Power BI Desktop.
7. Click the upper part of the Get Data button under the External data section
of the Home tab, as shown in Figure 1.11.
 Variants of Power BI   15

Figure 1.11:  Clicking the Get Data button

The Get Data dialog box appears.

8. Select the All tab from the left pane. A list of available data sources appears
in the right pane.
9. Select the desired data source from where you want to get data. In our case,
we have selected Excel.
10. Click the Connect button, as shown in Figure 1.12.

Figure 1.12: The Get Data dialog box

16   Chapter 1: Introducing Data Visualization

The Open dialog box appears.

11. Navigate to the location where the file to be connected to Power BI is located.
12. Select the file that you want to connect to Power BI.
13. Click the Open button, as shown in Figure 1.13.

Figure 1.13: The Open dialog box

After clicking the Open button, Power BI connects to the selected data source.
The Navigator dialog box appears.
14. Select the desired sheet under the Display Options section to load it to Power
BI. After selecting a sheet, its content appears in the right pane.
15. Click the Load button to load the selected sheet to Power BI, as shown in
Figure 1.14.
 Variants of Power BI   17

Figure 1.14: Loading a sheet

The selected sheet is loaded to Power BI and the FIELDS pane appears displaying
the fields of the sheet, as shown in Figure 1.15.
18   Chapter 1: Introducing Data Visualization

Figure 1.15: The FIELDS pane

By default, you get the Report view of Power BI Desktop. You can access the Data
view by clicking the Data icon in the left pane. It displays all the data in tabular
form, as shown in Figure 1.16.
 Variants of Power BI   19

Figure 1.16: Displaying the Data view

Shaping Data or Data Modeling

Power BI Desktop allows users to connect to several data sources. It also allows
users to shape the data according to their requirements. Shaping data is the
same thing as transforming data. Some of the tasks associated with shaping data
include:
–– Modifying columns or tables
–– Modifying data types
–– Adding or removing rows/columns
–– Making the first row as header

To shape or transform data, Power BI Desktop provides the Query Editor window.
This window allows you to shape data and create relationships. You can open
the Query Editor window by clicking the Edit Queries button under the External
Data section of the Home tab of Power BI Desktop. Figure 1.17 shows the Query
Editor window.
20   Chapter 1: Introducing Data Visualization

Figure 1.17: The Query Editor window

Note
The Query Editor window displays a blank pane when there is no data source.

Let us go through the user interface of the Query Editor window before providing
a detailed description of shaping data. Usually, the Query Editor window pro-
vides tools tabs within the Ribbon. The Ribbon provides a large set of commands
or options segregated into different tabs as outlined below.
1. Home tab: This tab contains the query related commands, such as adding
a new data source, entering data, managing columns, etc. Figure 1.18 shows
the Home tab.

Figure 1.18: Home tab

2. Transform tab: This tab contains commands related to data transformation

tasks, as shown in Figure 1.19.
 Variants of Power BI   21

Figure 1.19: Transform tab

3. Add Column tab: This tab contains commands related to adding a new
column, adding a custom column, and formatting a column, etc., as shown
in Figure 1.20.

Figure 1.20: Add Column tab

4. View tab: This tab contains commands to open or display panes or windows,
as shown in Figure 1.21.

Figure 1.21: View tab

In addition to the four main tabs on the Ribbon, the window contains the follow-
ing panes or sections:
1. Queries pane: This is the left pane of the Query Editor window, which dis-
plays the number of active queries with their names, as shown in Figure 1.22.
22   Chapter 1: Introducing Data Visualization

Figure 1.22: Queries pane

2. Data pane: This is the center pane where the actual data of the query dis-
plays, as shown in Figure 1.23.

Figure 1.23: Data pane

3. QUERY SETTINGS  pane: This pane lists the steps performed on a query
under the APPLIED STEPS section, as shown in Figure 1.24.
 Variants of Power BI   23

Figure 1.24: QUERY SETTINGS pane

Perform the following steps to shape data:

1. Click the Edit Queries button under the External data section of the Home
tab of Power BI Desktop. The Query Editor window appears.
2. Right-click the query in the Queries pane (left side of window). A context
menu appears.
3. Select the Reference option from the context menu to create the query’s ref-
erence, as shown in Figure 1.25.
24   Chapter 1: Introducing Data Visualization

Figure 1.25: Creating a reference of a query

A reference to the selected query is created.

4. Enter the desired name for the query in the Name text box under the PROP-
ERTIES section of the QUERY SETTINGS pane (right side of window). The
specified name is updated in the Queries pane automatically.
5. Select the Transform tab. Commands related to the selected tab appear.
6. Click the Group By button under the Table section, as shown in Figure 1.26.

Figure 1.26: Clicking the Group By button

 Variants of Power BI   25

The Group By dialog box appears.

7. Select the Basic radio button to create a simple query, or the Advanced radio
button to create a more complicated query.
8. Select the desired option from the Group by drop-down list based on how
you want to apply grouping. In our case, we have selected Country.
9. Click the Add grouping button to apply another grouping.
10. Select the desired option from the Group by drop-down list based on how
you want to apply grouping. In our case, we have selected Product.
11. Type the desired name of the column in the New column name text box. In
our case, we have typed “Total Products Sold”.
12. Select the desired option from the Operation drop-down list. In our case, we
have selected Sum.
13. Select the desired option from the Column drop-down list. In our case, we
have selected Units Sold.
14. Click the OK button, as shown in Figure 1.27.

Figure 1.27: The Group By dialog box

The result of the specified query displays, as shown in Figure 1.28.

26   Chapter 1: Introducing Data Visualization

Figure 1.28: Displaying the result

15. Click the Close & Apply button under the Close section of the Home tab to
apply the changes, as shown in Figure 1.29.

Figure 1.29:  Applying changes

The changes are applied and a new table is generated. You can do additional
tasks with the Query Editor window as per your requirements.

Creating Visuals
A report is all about visuals. Power BI supports a large collection of visuals, which
can be used for representing the required information in more appealing manner.

Perform the following steps to create visuals based on the query created in the
previous section:
1. Click the Slicer icon in the VISUALIZATIONS pane to add a slicer visual. The
selected visual appears in the work area.
2. Drag the desired field from the FIELDS pane to the Field section of the VISU-
ALIZATIONS pane. In our case, we have selected Country. A list of available
countries appears in the slicer, as shown in Figure 1.30.
 Variants of Power BI   27

Figure 1.30: Dragging fields

3. Click the Format icon to view the formatting settings. The formatting settings
related to the selected visual appear under each section.
4. Click the desired section to view the related settings and modify them as per
your requirements.
5. Add another slicer from the VISUALIZATIONS pane to the work area.
6. Drag the Product field from the FIELDS pane to the Field section of the
VISUALIZATIONS pane. A new slicer is added to the work area.
7. Apply the formatting settings as per your requirements.
8. Add a pie chart from the VISUALIZATIONS pane to the work area.
9. Drag the Country field in the FIELDS pane to the Legend section of the
VISUALIZATIONS pane.
10. Drag the Product field in the FIELDS pane to the Details section of the VISU-
ALIZATIONS pane.
11. Drag the Total Products Sold field in the FIELDS pane to the Values section
of the VISUALIZATIONS pane, as shown in Figure 1.31.
28   Chapter 1: Introducing Data Visualization

Figure 1.31: Dragging fields

12. Apply the formatting settings as per your requirement.

The visuals appear in the work area, as shown in Figure 1.32.

 Variants of Power BI   29

Figure 1.32: Displaying the visuals

Saving the Report

Generally speaking, it is good practice to save a report regularly.

Note
The extension of Power BI report is .pbix.

Perform the following steps to save the report:

1. Select the File tab from the Ribbon. The Backstage View appears.
2. Select the Save option from the Backstage View.
30   Chapter 1: Introducing Data Visualization

The Save As dialog box appears.

3. Select the location wherein you want to save the report.
4. Type the desired name for the report in the File name field. In our case, we
have typed DemoReport.
5. Click the Save button, as shown in Figure 1.33.

Figure 1.33: Saving a report

The report is saved with the specified name.

Power BI Service

Power BI Service/Power BI Online is a business intelligence service that hosts

reports in the cloud (Microsoft Azure). The major difference between Power BI
Desktop and Power BI Service is that the former focuses on creating data while
the latter focuses on sharing data. Another difference between the two lies in
their interface.

Note
You should have the sign-in credentials already to use Power BI Service. However, you can sign
up for free if you do not have the credentials.
 Variants of Power BI   31

User Interface of Power BI Service

Figure 1.34 shows the user interface of Power BI Service.

Figure 1.34: User interface of Power BI Service

A description of user interface components shown in Figure 1.34 is as follows:

1. Navigation pane: Allows users to navigate between workspaces and the
Power BI building blocks such as dashboards, reports, workbooks, and data-
sets. Figure 1.35 shows the navigation pane.
32   Chapter 1: Introducing Data Visualization

Figure 1.35: Navigation pane

The navigation pane contains several options. A brief description of these options
is as follows:
– Expand/collapse icon ( ): Is used to expand/collapse the navigation
menu.
– Favorites: Is used to open or manage the favorite content.
– Recent: Is used to view and open the content visited recently.
– Apps: Is used to view, open, or delete an app.
– Shared with me: Is used to view and search the content shared by a col-
league/friend with you.
– Workspaces: Displays available workspaces.
– Get Data button: Is used to add datasets, reports, and dashboards to Power BI.

2. Canvas: Is a collection of tiles and as such, provides a visualization area

for tiles/reports. It displays a report page when we open the report editor. A
tile can be added to a dashboard. The act of adding tiles to the dashboard is
known as pinning. Figure 1.36 shows the canvas.
 Variants of Power BI   33

Figure 1.36: Canvas

3. Q&A box: Looks for the solution in the dataset linked to the dashboard and
provides an answer to your query in the form of visualization. It can also be
used to add content to the dashboard. Figure 1.37 shows the Q&A box.

Figure 1.37:  Q&A box

4. Icon buttons: Provide help in performing specific tasks, such as opening

dashboard in full-screen mode, viewing notifications, applying different set-
tings, viewing downloads, getting help, and sending feedback. Figure 1.38
shows the icon buttons.

Figure 1.38: Icon buttons

5. Dashboard title: Displays the name of the workspace preceded by the dash-
board/report name. Each section in the dashboard title acts as an active link.
Figure 1.39 shows the dashboard title.
34   Chapter 1: Introducing Data Visualization

Figure 1.39: Dashboard title

6. Office 365 app launcher: Helps in easily locating and opening all Office 365
apps. When you click the Office 365 app launcher icon ( ), a list of Office 365
apps appears, as shown in Figure 1.40.

Figure 1.40: List of Office 365 apps

These apps help users quickly launch their emails and documents, etc.
7. Power BI Home button: Opens the featured dashboard if you have set it.
Otherwise, it opens the viewed dashboard. Figure 1.41 shows the Power BI
Home button.
 Variants of Power BI   35

Figure 1.41:  Power BI Home button

8. Labeled icon buttons: Allow users to interact with the content. You can
select the Ellipsis icon (…) to see more options for different tasks including
duplicating, printing, and refreshing the dashboard, etc. Figure 1.42 shows
the labeled icon buttons.

Figure 1.42: Labeled icon buttons

Building Blocks of Power BI Service

The following are some major building blocks of Power BI:
–– Dashboards
–– Reports
–– Workbooks
–– Datasets

These building blocks are grouped into workspaces, wherein workspaces act
as containers for these building blocks. In Power BI, the following two types of
workspaces are available:
–– My workspace: Allows a Power BI user to work with his/her content per-
sonally. No one can access your “My workspace”. To share the content with
others, you need to create an App workspace (outlined below) and bundle
the required content in the app, and share it with others in your organization.
–– App workspaces: Allow users to share content with others as well as create,
publish, and control apps. App workspaces are considered the major content
containers, which help in building a Power BI app.

Dashboards
A dashboard is a collection of tiles, from no tiles to any number of tiles. A tile is
the representation of data that is pinned to the dashboard. A tile can be created
through several components including reports, datasets, dashboards, Excel,
36   Chapter 1: Introducing Data Visualization

SSRS, etc. You can use the Add tile button to create individual tiles. You can add
text boxes, videos, streaming data, etc., to a tile directly from the dashboard.
In addition to pinning a tile from a report, you can pin the entire report pages
as a single tile to the dashboard.
You can select the Dashboards tab to view the available dashboards asso-
ciated with the workspace you selected. You can simply select a specific dash-
board to open it and view its content. Additionally, each dashboard provides a
personalized view of the associated datasets. You should note that you can not
make editing changes to the dashboards and reports shared by others. However,
you can edit the datasets as well as reports if you own the dashboard. Figure 1.43
shows a list of dashboards available under the Dashboards tab.

Figure 1.43: Dashboards

You may need dashboards for several reasons. Some of them are listed as follows:
–– View decision-making information in one glance.
–– Control important information about the organization.
–– Ensure that the same page and information is accessible and uniform to all
colleagues.
–– Administer the business condition or product condition.
–– Build a customized view of a dashboard.

Reports
A Power BI report is a collection of visualizations/visuals such as charts and
graphs. These visuals are taken from a single dataset. There are several ways to
create reports. Some of them are as follows:
 Variants of Power BI   37

–– Create reports from scratch within Power BI.

–– Import reports with dashboards shared by colleagues.
–– Create reports by connecting datasets to tools including Excel, Power BI
Desktop, databases, SaaS applications, and Apps. For example, you can
create a report based on the Power View sheets available in an Excel work-
book when a user is connected to it.

To interact with reports, Power BI provides the following two views:

1. Reading view: Is the default view of a report. This view allows both owners
as well as recipients of the shared link to access the report and its content.
However, editing can not be performed in this view.
2. Editing view: Allows only owners, co-owners, and granted users to explore,
design, and modify reports. You can open a report in the Editing view by
clicking the Edit report button in the labeled icon buttons.

All reports associated with a workspace appear under the Reports tab, as shown
in Figure 1.44.

Figure 1.44: Displaying reports

Datasets
A dataset is defined as a set of data that a user imports or connects to in Power BI.
Power BI can connect to all types of datasets and collates them together.
38   Chapter 1: Introducing Data Visualization

The following are important points related to datasets:

–– Datasets are linked with workspaces wherein a single dataset can be linked
to multiple workspaces.
–– A dataset can be linked to different reports.
–– Visualizations related to a dataset can be viewed on different dashboards.

All datasets associated with a workspace appear under the Datasets tab, as shown
in Figure 1.45.

Figure 1.45: Displaying datasets

Workbooks
A workbook is a special type of dataset that can be imported or connected to
Power BI. When you select Excel as an option for “Get data” and click the Connect
button, the associated workbook appears in Power BI. From here, you can pin
elements directly to the dashboard.

Publishing a Report

Publishing a report created in Power BI Desktop to Power BI Service is simple.

This can help users to easily access the report.

Perform the following steps to publish a report:

1. Open the report in Power BI Desktop.
 Publishing a Report   39

2. Click the Publish button under the Share section of the Home tab, as shown
in Figure 1.46.

Figure 1.46: Publishing a report

The Publish to Power BI dialog box appears.

3. Select the desired destination from the Select a destination list box.
4. Click the Select button, as shown in Figure 1.47.

Figure 1.47: The Publish to Power BI dialog box

The Publishing to Power BI dialog box displays the status of publishing the
report to Power BI. Once the publishing is successful, you can open the report in
Power BI by clicking the Open ‘DemoReport.pbix’ in Power BI link, as shown
in Figure 1.48.
40   Chapter 1: Introducing Data Visualization

Figure 1.48:  The Publishing to Power BI dialog box

The published report appears in Power BI Service, as shown in Figure 1.49.

Figure 1.49: Displaying the published report

 Summary   41

Summary

This chapter provided a brief overview of one of the prominent data visualization
tools, that is, Power BI. Power BI is a data visualization and business intelligence
tool that allows business owners to easily obtain their business statistics. The
advanced features associated with Power BI make it an ideal choice for busi-
ness analytics executives. This chapter also provided detailed information about
Power BI Desktop and Power BI Service. You also learned to create and publish a
report to Power BI Service.
C
 hapter 2
Power BI Azure Application
Power BI can be integrated with Azure services to obtain real-time insights into
your business. With the help of Azure APIs, you can see real-time business data in
an intuitive manner irrespective of the nature of processing of the data.
You can create reports in Power BI and embed them into a Web app. You can
also view real-time streaming of data, which means a live update to data can be
seen in visuals pinned to Power BI dashboards.

Embedding Power BI Reports into a Web App

Power BI reports and dashboards can be embedded into a Web app with the help
of APIs and sample code available from a source repository like Git.

Perform the following steps to embed Power BI reports into a Web app:
1. Build the source code for Web app in Visual Studio.
2. Register your app for Power BI by performing the following steps:
a. Navigate to the following link:
https://dev.powerbi.com/apps

The Register an Application for Power BI window appears.

b. Login to your Power BI account. Once the login is successful, you are
redirected to the Register an Application for Power BI window.
c. Enter the desired name for your app in the App Name text box.
d. Select the desired app type from the App Type drop-down list, as
shown in Figure 2.1.

DOI 10.1515/9781547400720-002
44   Chapter 2: Power BI Azure Application

Figure 2.1:  Specifying app details

e. Specify the redirect URL in the Redirect URL text box.

f. Specify the home page URL in the Home Page URL text box.
g. Select the desired APIs to access under the Dataset APIs, Report and
Dashboard APIs, and Other APIs sections, as shown in Figure 2.2.

Figure 2.2:  Selecting APIs to access

h. Click the Register App button under the Register your app section to
register the app, as shown in Figure 2.3.
 Embedding Power BI Reports into a Web App   45

Figure 2.3:  Registering the app

As you click the Register App button, client ID and client secret values are gener-
ated in the Client ID and Client Secret fields, respectively.
3. Open the Cloud.config file and enter values from the Client ID and Client
Secret fields in the ClientID and the ClientSecret settings, as shown in
Figure 2.4.
46   Chapter 2: Power BI Azure Application

Figure 2.4:  Specifying values in the ClientID and ClientSecret settings

4. Specify the report index in the GetReport() function to embed, as shown in

Figure 2.5.

Figure 2.5:  Specifying the report index

5. Press the F5 key on the keyboard to run the application.

 Real-Time Streaming   47

The specified report is embedded into the Web app, as shown in Figure 2.6.

Figure 2.6:  Embedding a report

Real-Time Streaming

Real-time streaming in Power BI helps users in streaming data in Power BI dash-

boards in real time, which means that an update to data is immediately available
in visuals pinned to Power BI dashboards. You can collect real-time information
from different sources that provide time-sensitive data. To visualize real-time
data, you need to set up the real-time streaming dataset in Power BI.

Exploring Real-Time Streaming Datasets

Power BI supports three real-time streaming datasets, which are as follows:

1. Push dataset: This dataset pushes data into Power BI Service, which auto-
matically creates a database at the time of creating the dataset. This database
stores the data in a queue format to allow users to create reports based on the
available data. You can pin the visuals of the created report to the dashboard,
which are updated in real time when there is an update to the data.
48   Chapter 2: Power BI Azure Application

2. Streaming dataset: Similar to the Push dataset, this dataset also pushes
data into Power BI. However, data is stored temporarily in the cache memory,
which is especially used for displaying visuals such as line charts. Some con-
siderations related to streaming dataset are as follows:
–– The data that flows from the stream cannot be used for creating report
visuals because there is no dedicated database.
–– The data can be visualized by adding a tile and using the “custom stream-
ing data” data source.
–– It shows real-time data quickly in the custom streaming tiles.
3. PubNub streaming dataset: This dataset provides the Power BI web client
that uses the PubNub SDK. This SDK reads the available PubNub data stream
and restricts Power BI Service to store any data. Some considerations related
to PubNub streaming dataset are as follows:
–– The data that flows from the stream cannot be used for creating report
visuals because there is no dedicated database.
–– Several report functionalities are unavailable including report filtering
and use of custom visuals, etc.
–– A PubNub data stream can be configured as the source and a tile can be
added to the dashboard for visualizing the PubNub streaming dataset.
–– The tiles on the dashboard display real-time data quickly.

Different Ways of Pushing Data

You can push data into a dataset using:

–– Power BI REST APIs
–– Streaming Dataset UI
–– Azure Stream Analytics

Viewing Real-Time Streaming of Data

Perform the following steps to view real-time streaming of data:

1. Open the Power BI Service portal.
2. Click the My Workspace button in the left pane.
3. Click the Create button in the right pane. A drop-down list appears.
4. Click the Streaming dataset option, as shown in Figure 2.7.
 Real-Time Streaming   49

Figure 2.7:  Creating a streaming dataset

The New streaming dataset wizard appears.

5. Select the desired data source under the Choose the source of your data
section. In our case, we have selected PUBNUB.
6. Click the Next button, as shown in Figure 2.8.

Figure 2.8:  The New streaming dataset wizard

The next page appears requiring details such as the subscription key and channel
name.
7. Enter the desired dataset name in the Dataset name text box.
8. Enter the relevant subscription key in the Sub-key text box.
9. Enter the relevant channel name in the Channel name text box.
50   Chapter 2: Power BI Azure Application

10. Click the Next button, as shown in Figure 2.9.

Figure 2.9:  Specifying subscription details

The next page appears requiring the values from the stream.
11. Specify values and select the relevant data type for the values under the
Values from stream section.
12. Click the Create button, as shown in Figure 2.10.
 Real-Time Streaming   51

Figure 2.10:  Specifying values from the stream

The specified dataset is created. You can locate this dataset under the Datasets
tab, as shown in Figure 2.11.

Figure 2.11:  Viewing the dataset

52   Chapter 2: Power BI Azure Application

13. Click the Create button. A drop-down list appears.

14. Click the Dashboard option to create a new dashboard, as shown in Figure 2.12.

Figure 2.12:  Creating a dashboard

The Create dashboard dialog box appears.

15. Type the desired name for the dashboard in the Dashboard name text box.
16. Click the Create button, as shown in Figure 2.13.

Figure 2.13:  The Create dashboard dialog box

The dashboard is created with the specified name.

17. Click the Add tile button, as shown in Figure 2.14.
 Real-Time Streaming   53

Figure 2.14:  Clicking the Add tile button

The Add tile dialog box appears.

18. Select the Custom Streaming Data option under the REAL-TIME DATA
section.
19. Click the Next button, as shown in Figure 2.15.

Figure 2.15:  The Add tile dialog box

54   Chapter 2: Power BI Azure Application

The Add a custom streaming data tile dialog box appears.

20. Select a streaming dataset. In our case, we have selected the dataset created
earlier that appears under the YOUR DATASETS section.
21. Click the Next button, as shown in Figure 2.16.

Figure 2.16:  The Add a custom streaming data tile dialog box

The Visualization design page appears.

22. Select the desired visualization type from the Visualization Type drop-
down list. In our case, we have selected Line chart, as shown in Figure 2.17.
 Real-Time Streaming   55

Figure 2.17:  Selecting a visualization type

23. Select the desired axis value from the Axis drop-down list.
24. Select the desired value from the Values drop-down list.
25. Click the Next button, as shown in Figure 2.18.
56   Chapter 2: Power BI Azure Application

Figure 2.18:  The Visualization design page

The Tile details dialog box appears.

26. Select the Display title and subtitle checkbox to display the title as well as
a subtitle.
27. Enter the desired title and subtitle in the Title and Subtitle text boxes,
respectively.
28. Click the Apply button, as shown in Figure 2.19.
 Real-Time Streaming   57

Figure 2.19:  Adding tile details

The tile is added to the dashboard and real-time data appears in the tile, as shown
in Figure 2.20.
58   Chapter 2: Power BI Azure Application

Figure 2.20:  Displaying real-time streaming

Quick Insights

Power BI provides the Quick Insights feature, which applies complex algorithms
to the dataset and locates different subsets of that dataset efficiently.
You can create appealing visualizations through Quick Insights by running it
on either a dataset or a dashboard tile.

Perform the following steps to run Quick Insights on a dataset:

1. Open Power BI Service.
2. Select the My Workspace option from the left pane. A list of available dash-
boards appears in the right pane under the Dashboards tab.
3. Select the Datasets tab. A list of available datasets appears.
4. Click the Ellipsis icon (…) next to the desired dataset, as shown in Figure 2.21.
 Real-Time Streaming   59

Figure 2.21:  Clicking the Ellipsis icon

A drop-down list appears.

5. Click the Get quick insights option, as shown in Figure 2.22.
60   Chapter 2: Power BI Azure Application

Figure 2.22:  Clicking the Get quick insights option

The Searching for insights message box appears that displays the progress of
searching insights, as shown in Figure 2.23.

Figure 2.23:  The Searching for insights message box

The Insights are ready dialog box displays “You have insights for DemoRe-
port.” In our example, DemoReport is the selected dataset.
6. Click the View insights button, as shown in Figure 2.24.
 Real-Time Streaming   61

Figure 2.24:  The Insights are ready dialog box

The Quick Insights for DemoReport window displays all possible insights for
the selected dataset (DemoReport in our case), as shown in Figure 2.25.

Figure 2.25:  Displaying quick insights

7. Click the Pin visual icon ( ) to pin the selected visual to the dashboard. The
Pin to dashboard dialog box appears.
8. Select the desired radio button to specify whether you want to pin the selected
visual to an existing dashboard or a new dashboard. In our case, we have
selected the New dashboard radio button.
9. Enter the desired name for the new dashboard.
62   Chapter 2: Power BI Azure Application

10. Click the Pin button to pin the selected visual to the new dashboard, as
shown in Figure 2.26.

Figure 2.26:  Pinning a visual to a dashboard

The Pinned to dashboard message box appears stating that the visualization is
pinned to the specified dashboard successfully.
11. Click the Go to dashboard button to view the visualization pinned to the
dashboard, as shown in Figure 2.27.

Figure 2.27:  The Pinned to dashboard message box

The selected visualization is pinned to the specified dashboard.

12. Click the Ellipsis icon (…). A drop-down list appears.
 Real-Time Streaming   63

13. Select the Open in focus mode option, as shown in Figure 2.28.

Figure 2.28:  Opening the visual in focus mode

The selected visual appears in the focus mode.

14. Click the Related Insights icon ( ) to view the insights related to the selected
visual. A list of related insights appears under the INSIGHTS section, as
shown in Figure 2.29.
64   Chapter 2: Power BI Azure Application

Figure 2.29:  Viewing related insights

Summary

This chapter provided detailed information about embedding Power BI reports

into Azure Web app to get real-time insights on a business. The steps for real-time
streaming of data were covered. You learned how to register a Web app for Power
BI and make necessary modifications in the code to embed Power BI reports into a
Web app. Different types of real-time streaming datasets including Push dataset,
Streaming dataset, and PubNub streaming dataset were discussed. You were also
acquainted with the step-by-step procedure of viewing real-time streaming of
data and learned how to use the Quick Insights feature of Power BI that applies
complex algorithms to the dataset and quickly locates different subsets of the
dataset.
C
 hapter 3
Power BI on Microsoft Stack
As discussed in the previous chapter, Power BI can be integrated with hundreds
of data sources. One of the most prominent data sources is SQL Server, which is a
relational database management system introduced by Microsoft. It is primarily
used in business applications.
This chapter provides an in-depth description of integrating Power BI with
SQL Server to create interactive reports.

Getting Data into Power BI from SQL Server

There are two options to bring SQL Server data into Power BI Desktop, as follows:
–– Import
–– DirectQuery

Using the Import Option

In Power BI Desktop, the Import option imports the selected tables and columns.
The imported data can be used to create visuals.

The Import option contains the following process:

–– While using the Get Data option, each selected table defines a query, which
returns a set of data that can be edited and loaded into Power BI.
–– Once the queries are loaded, the data related to queries is imported into the
Power BI cache.
–– Visuals created in Power BI Desktop query this imported data. Power BI is
responsible for ensuring that the query is fast and efficient, and that changes
to the visual are reflected instantly.
–– Any update on data is not reflected in the visuals unless you refresh or reim-
port data.
–– The report published to Power BI Service creates a dataset in Power BI
Service. This dataset contains the imported data. You can set up scheduled
data refresh, such as reimport data every day. You may also need to set up/
configure an on-premise data gateway depending upon the location of the
SQL Server.

DOI 10.1515/9781547400720-003
66   Chapter 3: Power BI on Microsoft Stack

–– To ensure connectivity, the data imported into Power BI is automatically

queried when you open an existing report or create a new one.
–– You can pin visuals as tiles to the dashboard. These tiles are refreshed auto-
matically when you refresh the dataset.

Perform the following steps to use the Import option for importing database
tables of SQL Server into Power BI Desktop:
1. Launch Power BI Desktop.
2. Click the Get Data button under the External data section of the Home tab.
A list of data sources appears.
3. Select the SQL Server option from the list, as shown in Figure 3.1.

Figure 3.1:  Selecting the SQL Server option

The SQL Server database dialog box appears.

4. Enter the server name in the Server text box.
5. Enter the name of the database in the Database text box.
6. Select the Import radio button under the Data Connectivity mode section.
7. Click the OK button, as shown in Figure 3.2.
 Getting Data into Power BI from SQL Server   67

Figure 3.2:  The SQL Server database dialog box

The Navigator window appears.

8. Select the checkboxes next to the table names appearing under the Display
Options section in the left pane of the Navigator window. A preview of the
table selected last appears in the right pane.
9. Click the Load button to load the tables into Power BI Desktop, as shown in
Figure 3.3.

Figure 3.3:  The Navigator window

68   Chapter 3: Power BI on Microsoft Stack

The Load pane appears displaying the progress of each table being imported into
Power BI Desktop, as shown in Figure 3.4.

Figure 3.4:  The Load pane

Once the loading process is done, the imported tables are displayed in the FIELDS
pane, as shown in Figure 3.5.
 Getting Data into Power BI from SQL Server   69

Figure 3.5:  Imported tables

Using the DirectQuery Option

The DirectQuery option does not import or copy data to Power BI Desktop.
However, the FIELDS pane displays the selected tables and columns. When you
use the DirectQuery option, Power BI Desktop queries the connected data source
each time you create a visual or report. This means that you get an updated visual
each time. You can refresh the visuals with updated data by clicking the Refresh
button under the Home tab.

Perform the following steps to use the DirectQuery option:

1. Launch Power BI Desktop.
2. Click the Get Data button under the External data section of the Home tab.
A list of data sources appears.
3. Select the SQL Server option from the list. The SQL Server database dialog
box appears.
4. Enter the server name in the Server text box.
5. Enter the name of the database in the Database text box.
6. Select the DirectQuery radio button under the Data Connectivity mode
section.
7. Click the Advanced options button to view the advanced options. The asso-
ciated options appear.
70   Chapter 3: Power BI on Microsoft Stack

8. Enter the command timeout in the Command timeout in minutes (optional)

text box. You can also leave this field blank as it is optional.
9. Enter the desired SQL statement in the SQL statement (optional, requires
database) text area.
10. Select the Include relationship columns checkbox.
11. Click the OK button, as shown in Figure 3.6.

Figure 3.6:  The SQL Server database dialog box

A window appears displaying the name of the database followed by the server
name. It also displays the table view of the query made to the database.
12. Click the Load button to load the query, as shown in Figure 3.7.
 Getting Data into Power BI from SQL Server   71

Figure 3.7:  Loading a query

The Create connections message box appears displaying the progress of creat-
ing connections between Power BI and queried SQL Server statement, as shown
in Figure 3.8.

Figure 3.8:  The Create connections message box

Once the connection is established successfully, a query with the specified fields
is added in the FIELDS pane, as shown in Figure 3.9.
72   Chapter 3: Power BI on Microsoft Stack

Figure 3.9:  Displaying fields of a query

Advantages of Using the DirectQuery Option

There are several advantages of using the DirectQuery option. Some of them are
as follows:
–– It allows users to create visuals over very large datasets.
–– The reports created by this option always contain the latest data.
–– It supports large datasets, which means that it is not limited to 1 GB dataset.
–– It supports several data modeling and data transformations.

Limitations of Using the DirectQuery Option

In addition to the advantages of the DirectQuery option, few limitations are also
associated with it. Some of them are as follows:
–– The tables selected for Power BI must be taken from a single database.
–– The complex query of Query Editor may result in an error. This error can be
rectified by using the Import option in place of the DirectQuery option.
–– The relationship filtering can not be enabled in both the directions.
–– It does not support time intelligence features, such as year, quarter, month,
day, etc., of date columns.
–– It supports a limited number of DAX expressions for creating a measure.
 Getting Data into Power BI from SQL Server   73

–– It limits the number of returned data rows to 1 million, which in turn does not
affect calculations used for creating the dataset.

Considerations When Using the DirectQuery Option

At the time of using the DirectQuery option to connect to SQL Server database
tables in Power BI, you should consider the following three parameters:
1. Performance and load
2. Features
3. Security

Performance and Load

The performance of the DirectQuery option depends on the response time taken
by the back-end source to respond to the query sent by the DirectQuery requests
to the source database. The response time also affects the visuals refresh rate,
which means that the visuals are refreshed as per the response time. The rec-
ommended response time for visuals to represent updated data is less than five
seconds. The response time of thirty seconds is acceptable. After publishing the
report to Power BI Service, the user receives an error if the query times out when
it takes longer than a few minutes to respond.
The number of Power BI users consuming the published report is called the
“Load on the database,” which is greatly influenced by using Row Level Security
(RLS). When we use RLS on a dashboard tile and refresh the tile, one query per
user is generated for the database that in turn increases the load on the database
and thus affects the performance.

Features
The DirectQuery option does not support all features in Power BI Desktop. Some
features are supported with some limitations. Some features of Power BI Service
are also not available when we use the DirectQuery option. For example, the
datasets created using the DirectQuery option do not support the Quick Insights
feature. Therefore, you should consider the limitations of such features to deter-
mine the use of the DirectQuery option.

Security
Once a report is published to Power BI Service, all users will be required to use
credentials to connect to the back-end data source and consume the report. This
condition is similar to the one used when data is imported through the Import
option. The same data is available for all users irrespective of the security rules
74   Chapter 3: Power BI on Microsoft Stack

described in the back-end data source. The DirectQuery option is used for imple-
menting per-user security for customers.

Data Modeling

Data modeling defines the way the data is modeled into Power BI. You do not need
to put your data into one table. Instead, different tables can be imported from
different data sources and a relationship can be defined between these tables to
easily model the data. You can create calculated columns and apply configura-
tions to view data segments in Power BI. You can also apply these configurations
to visuals created in Power BI. We will cover the following items in this section:
–– Creating relationships among tables
○○ Setting cardinality of relationships
○○ Understanding cross-filtering
–– Using DAX
–– Using calculated columns
–– Using calculated tables

Creating Relationships Among Tables

As discussed earlier, you can import different tables from different data sources
into Power BI. These tables may have a large amount of data. You may also need
to do analysis using data from these tables. In this case, it will be hard to examine
how these tables are related to each other. Therefore, you need to create relation-
ships between these tables so that you can calculate results correctly and get the
correct information in your reports.
In Power BI Desktop, you can easily create relationships between tables. You
can either use the Autodetect feature to automatically create relationships among
tables, or you can create it manually.

Note
You may need to make some edits to the relationship that was created automatically.

The Relationships view displays the relationship among tables, as shown in

Figure 3.10.
 Data Modeling   75

Figure 3.10:  The Relationships view

Using the Autodetect feature

Perform the following steps to create a relationship using the Autodetect feature:
1. Click the Manage Relationships button under the Relationships section of
the Home tab, as shown in Figure 3.11.

Figure 3.11:  Clicking the Manage Relationships button

The Manage relationships window appears.

2. Click the Autodetect button to detect relationship automatically, as shown
in Figure 3.12.
76   Chapter 3: Power BI on Microsoft Stack

Figure 3.12:  Using the Autodetect button

The Detecting relationships message box appears displaying the progress of the
relationship detection, as shown in Figure 3.13.

Figure 3.13:  The Detecting relationships message box

The Autodetect message box appears once the detection is done.

3. Click the Close button to close the Autodetect message box, as shown in
Figure 3.14.
 Data Modeling   77

Figure 3.14:  The Autodetect message box

The Manage relationships window displays the relationships among different

tables, as shown in Figure 3.15.

Figure 3.15:  The Manage relationships window with relationships

4. Click the Close button to close the Manage relationships window.

You can see the relationships among tables in the Relationships view, as shown
in Figure 3.16.
78   Chapter 3: Power BI on Microsoft Stack

Figure 3.16:  Viewing relationships in Relationships view

Creating Relationships Manually

Perform the following steps to create a relationship manually:
1. Click the Manage Relationships button under the Relationships section of
the Home tab. The Manage relationships window appears.
2. Click the New button to create relationships manually.

The Create relationship dialog box appears.

3. Select the desired table from the first drop-down list. A list of columns asso-
ciated with the selected table appears.
4. Select the desired column that you want to relate to another column.
5. Select another table from the second drop-down list. A list of columns asso-
ciated with the selected table appears.
6. Select the desired column that you want to relate to the column selected in
the first table.
7. Leave all other fields intact.
8. Click the OK button, as shown in Figure 3.17.
 Data Modeling   79

Figure 3.17:  The Create relationship dialog box

The Manage relationships window appears and shows the new relationship.
9. Click the Close button to close the Manage relationships window, as shown
in Figure 3.18.

Figure 3.18:  The Manage relationships window

80   Chapter 3: Power BI on Microsoft Stack

10. Open the Relationships view to analyze the relationship between the
selected tables, as shown in Figure 3.19.

Figure 3.19:  The Relationships view

Understanding Cardinality
Cardinality is defined as the degree of relationship, which specifies the number
of occurrences of the first table linked to the number of occurrences of the second
table. Power BI supports the following three types of cardinalities:
–– Many to One (*:1): This is the default type of cardinality set in Power BI. It
states that multiple occurrences in the first table are linked to a single occur-
rence in the other table, called the Lookup table.
–– One to One (1:1): States that a single instance of a value in the first table is
linked to only one instance of a specific value in the other table, called the
Lookup table.
–– One to Many (1:*): States that a single instance of a value in the first table is
(or can be) linked to multiple occurrences in the other table.

Usually, the cardinality of the relationship is set automatically by Power BI

Desktop. However, you may need to change it manually when you update data.
The cardinality of the relationship can be set by using the Cardinality drop-down
list. Let us demonstrate the concept of cardinality with an example.
We have two tables, named ProjectDetails and ProjectPriority. These tables
contain the following data.

ProjectDetails

ProjectName StartDate EndDate

Project A 5/15/2017 10/20/2017

Project B 10/10/2017 12/12/2017
 Data Modeling   81

ProjectPriority

ProName Priority

Project A 1
Project B 2
Project C 3
Project D 3

We can establish a relationship between these tables based on the ProjectName

column in the ProjectDetails table and the ProName column in the ProjectPriority
table. The cardinality between these tables can be set as One to One because we will
not see any repeating values in the ProjectName column when we combine these
tables. However, data update may occur over time, which will add more fields to the
table. Now, the updated ProjectDetails table contains the following data:

ProjectName StartDate EndDate

Project A 5/15/2017 10/20/2017

Project B 10/10/2017 12/12/2017
Project A 10/21/2017 12/20/2017

When we combine both tables, we will get the following table:

ProjectName Priority StartDate EndDate

Project A 1 5/15/2017 10/20/2017

Project B 2 10/10/2017 12/12/2017
Project C 3
Project D 3
Project A 1 10/21/2017 12/20/2017

From the above table, we can identify that the ProjectName column has repeating
values, and One to One cardinality will not work. Therefore, we need to set Many
to One cardinality in this case.

Cross-Filtering
Cross-filtering direction specifies the direction of the filter applied to related
tables. Power BI provides the following two options for cross-filtering directions:
82   Chapter 3: Power BI on Microsoft Stack

1. Single: When this option is applied to the relationship, filtering is applied to

the table where values are being grouped. Note that the relationship will have
a single direction when a Power Pivot is imported into Excel.
2. Both: This is the default direction for the related tables. It specifies that both
the related tables act as a single table for filtering purposes. This cross-filter-
ing option works well with a table surrounded by several lookup tables. Such
configuration is known as Star schema configuration.

Using Data Analysis Expressions

Data Analysis Expressions (DAX) is an expression (a set of functions, constants,

and operators) written to apply calculations on data available in your model. This
newly created data can be used for creating visuals.
DAX formulas help to solve real business problems by allowing users to fetch
the required information from the available data. This means that users can pull
data from different tables according to their requirements and apply calculations
on the data to view the required results. For example, your database could contain
tables for sales, and for product descriptions. Querying for a product’s sale can be
an easy task. However, you may also need to calculate total sales of products that
are sold in a region and within the specified time duration. Here, you need to use
DAX to perform this task easily.

The fundamental concepts of DAX are as follows:

1. Syntax
2. Functions
3. Context

Syntax
Syntax defines the way a formula is written. A formula is made up of several ele-
ments, called syntax elements. Figure 3.20 shows a DAX formula.

Figure 3.20:  DAX formula

A description of the syntax elements listed in above formula is as follows:

1. “Total Sales” is the name of measure.
 Data Modeling   83

2. The equals sign operator (=) states that the formula has started.
3. “SUM” is a DAX function, which returns the sum of all the numbers available
in the specified column.
4. The parenthesis “()” encloses the expression having one or more arguments.
There should be at least one argument for a function.
5. “Sale SalesOrderDetail” is the name of the referenced table.
6. “[LineTotal]” is the name of the column in the “Sale SalesOrderDetail” table.

Note
The easiest way to understand a DAX formula is separating the syntax elements into a natural
language. For example, the formula listed in Figure 3.20 can be read as:
To get “Total Sales,” calculate (=) the SUM of values in the [LineTotal] column of the “Sale Sale-
sOrderDetail” table.

Functions
A function is a predefined formula that returns a value in a specified order by per-
forming calculations on specific values, known as arguments. An argument can
be a formula, function, number, or text. Power BI supports a variety of functions.
Table 3.1 lists some useful functions with their syntaxes and descriptions.

Table 3.1: Commonly Used Functions

Function Name Syntax Description

CALENDAR CALENDAR(<start_date>, Returns a continuous set of dates in a single

<end_date>) column within the specified range.
DATE DATE(<year>, <month>, Returns the specified date.
<day>)
DATEDIFF DATEDIFF(<start_date>, Returns the number of intervals between the
<end_date>, <interval>) specified dates.
DATEVALUE DATEVALUE(date_text) Returns a datetime value based on the locale
settings of your computer.
DAY DAY(date) Returns the day of the month in integer format.
NOW NOW() Returns the current date and time.
TODAY TODAY() Returns the current date with time set to
12:00:00 PM.
CALCULATE CALCULATE(<expres- Returns an expression based on the specified
sion>,<filter1>,<filter2>…) filters.
AND AND(<logical1>,<logi- Returns TRUE only when both the arguments are
cal2>) TRUE, otherwise returns FALSE.
84   Chapter 3: Power BI on Microsoft Stack

Table 3.1.  (continued)

Function Name Syntax Description

IF IF(<logical_test>,<value_ Returns first value when the specified expres-

if_true>, value_if_false) sion (<logical_test>) is TRUE, otherwise returns
second value.
OR OR(<logical1>,<logical2>) Returns TRUE when one of the arguments is TRUE
and returns FALSE when both the arguments are
FALSE.
SUM SUM(<column>) Returns the sum of all the values specified in a
column.
TRUNC TRUNC(<number>, Returns a truncated number as an integer by
<num_digits>) eliminating the decimals or fractional part of the
number.

Note
A complete list of functions is available at the following link:
https://msdn.microsoft.com/en-us/library/ee634396.aspx

Context
While discussing DAX, it is advisable to understand context. DAX supports the
following two types of contexts:
1. Row context: This type of context is applicable when a function is avail-
able within a formula and this function can examine a single row in a table
through filters. This function inherits and applies row context for each filter-
ing rows of the table. This context is usually applied to measures.
2. Filter context: This type of context deals with applying multiple filters in a
calculation that defines a result or value. They do not override row context,
but are used with row context. Most reports use filter context. For example,
when you apply a visual to a field named TotalSales, and add filters like Year
and Region to it, it means that you are applying a filter context, which pro-
vides a data subset based on the specified year and region.

Using Calculated Columns

You can add custom columns to the tables available in your model. After adding
these columns, you can add data to these columns either by loading values from
 Data Modeling   85

the data source or by creating a DAX formula. You can create a calculated column
by clicking the New Column button.
Calculated columns that you create in Power BI appear in the FIELDS pane
similar to other columns already available under the respective table. You can
also assign the required name for the calculated column and use this field for
creating visuals like other fields.

Perform the following steps to create a calculated column:

1. Click the New Column button under the Calculations section of the Model-
ing tab. A new column is added to the selected table in the FIELDS pane and
the formula bar appears above the Report canvas, as shown in Figure 3.21.

Figure 3.21:  Displaying the formula bar

Note
The formula bar is the area where you can rename the column and specify a DAX formula.

2. Enter the desired DAX formula in the formula bar. In our case, we are concat-
enating values of two columns into one, as shown in Figure 3.22.

Figure 3.22:  Using DAX formula

From the above figure, following considerations can be made:

a. Name is the name of the calculated column.
b. CONCATENATE is the name of the function that concatenates two
strings.
c. Sales_By_Region[FirstName] states the FirstName column in the
Sales_By_Region table.
d. Sales_By_Region[LastName] states the LastName column in the
Sales_By_Region table.
3. Click the OK ( ) icon to accept the changes.

After you click the OK ( ) icon, the calculated column is created in the specified
table. You can view a visual for the calculated column by selecting the desired
86   Chapter 3: Power BI on Microsoft Stack

visual from the VISUALIZATIONS pane and selecting fields to display in the visual
from the FIELDS pane, as shown in Figure 3.23.

Figure 3.23:  Creating a visual for the calculated column

Using Calculated Tables

The concept of creating a calculated table is similar to creating a calculated

column. You can create a calculated table in Power BI Desktop by simply using
the New Table button under the Calculations section of the Modeling tab. You can
add data to the columns of a calculated table either manually or by using the DAX
formula. You can specify the desired name for the calculated table as per your
requirements.
The concept of calculated tables can be better understood with the help of an
example. In our example, a company has two offices located in the Northwest and
the Southwest regions. Each office maintains a list of its employees. The company
director wants to see a list of all its employees working in both the offices. Doing
this work manually can be a tricky process as the number of employees grows. In
Power BI, the calculated table can be used such that it joins both the tables and
lists all the employees in a single table.
 Data Modeling   87

Perform the following steps to create a calculated table:

1. Click the New Table button under the Calculations section of the Modeling
tab. A formula bar appears, as shown in Figure 3.24.

Figure 3.24:  A formula bar

2. Enter a DAX formula for joining two tables in the formula bar, as shown in
Figure 3.25.

Figure 3.25:  Entering a DAX Formula

From the DAX formula mentioned in the figure above, the following consider-
ations can be made:
a. “Employees” is the name of the calculated table.
b. “=” is the operator.
c. UNION is the name of the function that joins two tables named North-
westEmployees and SouthwestEmployees.
3. Click the OK ( ) icon to save the DAX formula. A table named Employees is
created and displayed similar to other tables in the FIELDS pane, as shown
in Figure 3.26.

Figure 3.26:  The FIELDS pane

88   Chapter 3: Power BI on Microsoft Stack

You can view the content of this table in the Data view, as shown in Figure 3.27.

Figure 3.27:  Viewing the content of the table

Creating a Report

Once you are done with the process of pulling data from SQL Server and applying
data modeling practices, you can create a report containing visuals in Power BI
Desktop. As discussed earlier, the following two options can be used to get data
from SQL Server to Power BI Desktop:
1. Using the DirectQuery option
2. Using the Import option

In this section, you will learn to create isolated reports using both options.
 Creating a Report   89

Creating a Report Using the DirectQuery Option

Perform the following steps to load data into Power BI Desktop using the
DirectQuery option and create a report based on that data:
1. Launch Power BI Desktop.
2. Click the Get Data button under the External data section of the Home tab.
A list of data sources appears.
3. Select the SQL Server option from the list. The SQL Server database dialog
box displays.
4. Enter the server name in the Server text box.
5. Enter the name of the database in the Database text box.
6. Select the DirectQuery radio button under the Data Connectivity mode
section.
7. Click the Advanced options button to view the advanced options. The asso-
ciated options appear.
8. Enter the command timeout in the Command timeout in minutes text box.
You can also leave this field blank since it is optional.
9. Enter the desired SQL statement in the SQL statement (optional, requires
database) text area. In our case, we have entered the following SQL statement:

SELECT soh.SalesOrderID, soh.TotalDue,soh.SubTotal, soh.OrderDate, c.CustomerID,

p.FirstName, p.LastName, RTRIM(sp.StateProvinceCode) as StateProvinceCode,
ad.City, sp.Name as State, ctr.Name as Country, ad.PostalCode FROM Sales.
SalesOrderHeader AS soh INNER JOIN Sales.Customer AS c ON soh.CustomerID =
c.CustomerID INNER JOIN

Person.BusinessEntity AS b ON b.BusinessEntityID = c.PersonID INNER JOIN

Person.Person AS p ON p.BusinessEntityID = b.BusinessEntityID INNER JOIN

Person.BusinessEntityAddress AS a ON a.BusinessEntityID = b.BusinessEntityID INNER

JOIN

Person.Address AS ad ON ad.AddressID = a.AddressID INNER JOIN

Person.AddressType AS at ON at.AddressTypeID = a.AddressTypeID INNER JOIN

Person.StateProvince AS sp ON sp.StateProvinceID = ad.StateProvinceID INNER JOIN

Person.CountryRegion ctr ON sp.CountryRegionCode = ctr.CountryRegionCode

WHERE(c.PersonID IS NOT NULL)

AND (at.Name = N'Home')

AND (sp.CountryRegionCode = N'US')

90   Chapter 3: Power BI on Microsoft Stack

10. Click the OK button, as shown in Figure 3.28.

Figure 3.28:  The SQL Server database dialog box

A window appears displaying the name of the database followed by the server
name. It also shows the table view of the query made to the database.
11. Click the Load button to load the query, as shown in Figure 3.29.
 Creating a Report   91

Figure 3.29:  Loading a query

The Create connections message box appears displaying the process of creating
connections between Power BI and the queried SQL Server statement. Once the
connection is established successfully, a query (Query1) with the specified fields
is added in the FIELDS pane.
12. Right-click the query. A context menu opens.
13. Select the Rename option from the context menu to rename it, as shown in
Figure 3.30.
92   Chapter 3: Power BI on Microsoft Stack

Figure 3.30:  Renaming query

14. Replace the word Query1 with the desired name. In our case, we have entered
Sales_By_Region.
15. Click the New Column button under the Calculations section of the Model-
ing tab. The formula bar appears.
16. Type the following DAX expression to create a calculated column called
Name that concatenates two columns called FirstName and LastName:

Name = CONCATENATE(Sales_By_Region[FirstName], Sales_By_Region[LastName])

17. Click the OK ( ) icon to save the DAX expression. This creates a calculated
column titled Name under the Sales_By_Region table, as shown in Figure
3.31.
 Creating a Report   93

Figure 3.31:  Creating a calculated column

18. Insert the desired visuals that you want to showcase in your report. In our case,
we have created a report with a variety of visuals, as shown in Figure 3.32.

Figure 3.32:  Creating a report

94   Chapter 3: Power BI on Microsoft Stack

In the above report, we have performed the following tasks:

1. Inserted an image by using the Image button under the Insert section of the
Home tab. Once inserted, we set its border to black in the FORMAT IMAGE pane.
2. Inserted a text box by clicking the Text box button under the Insert section of
the Home tab and setting its font size. We have also set its background color.
3. Inserted a card visual by clicking the Card visual under the VISUALIZATIONS
pane. We dragged the OrderDate field under the FIELDS pane to the Values
field under the Fields section. Then, we added a title to the card. We also set
the Category label to Off under the Format section. The border color is spec-
ified as black.
4. Added a clustered bar chart by clicking the Clustered bar chart icon under the
VISUALIZATIONS pane. In the Fields section, we dragged Name to the Axis
field and SubTotal to the Value field. The border color is specified as black.
5. Added a pie chart by clicking the Pie chart icon under the VISUALIZATIONS
pane. In the Fields section, we dragged State to the Legend field and SubTo-
tal to the Values field. The border color is specified as black. We have also
selected the Percentage of total option for Label style under the Detail labels
section.
6. Added a clustered column chart by clicking the Clustered column chart icon
under the VISUALIZATIONS pane. In the Fields section, we dragged City to
the Axis field and SubTotal to the Value field. The border color is specified as
black. The Orientation value is set to Vertical under the Data labels section.
7. Added a line chart by clicking the Line chart icon under the VISUALIZATIONS
pane. In the Fields section, we dragged State to the Axis field and TotalDue
to the Values field. The border color is specified as black. A color is set for the
TotalDue value under the Data colors section.
8. Added a table by clicking the Table icon under the VISUALIZATIONS pane. In
the Fields section, we dragged Name, Country, State, City, OrderDate, SubTo-
tal, and TotalDue to the Values field. The border color is specified as black.
A color is set for the TotalDue value under the Data colors section. The Font
family and Text size options under the Values section are set to Calibri and 12,
respectively.
9. Added a map by clicking the Map icon under the VISUALIZATIONS pane. In
the Fields section, we dragged City to the Location field. The border color is
specified as black.
 Creating a Report   95

Creating a Report Using the Import Option

Perform the following steps to load the data into Power BI Desktop using the
Import option and creating a report based on that data:
1. Launch Power BI Desktop.
2. Click the Get Data button under the External data section of the Home tab.
A list of data sources appears.
3. Select the SQL Server option from the list. The SQL Server database dialog
box appears.
4. Enter the server name in the Server text box.
5. Enter the name of the database in the Database text box.
6. Select the Import radio button under the Data Connectivity mode section.
7. Click the OK button. The Navigator window appears.
8. Select the desired tables from the Navigator window.
9. Click the Load button, as shown in Figure 3.33.

Figure 3.33:  Loading tables

The Load dialog box appears displaying the progress of loading the selected
tables. Once the selected tables are loaded, they are displayed in the FIELDS pane.
10. Insert the desired visuals that you want to showcase in your report. In our case,
we have created a report showing different visuals, as shown in Figure 3.34.
96   Chapter 3: Power BI on Microsoft Stack

Figure 3.34:  Creating a report

Saving the Report

Once you are done with the process of creating a report, you need to save it to an
appropriate location. You should save the report regularly to avoid any loss of
your work on the report due to an unexpected event like a power failure.

Perform the following steps to save a report:

1. Select the File tab on the Ribbon. The Backstage View appears.
2. Select the Save As option. The Save As dialog box appears.
3. Navigate to the location wherein you want to save your report.
4. Enter the desired name for the report in the File name combo box.
5. Click the Save button, as shown in Figure 3.35.
 Creating a Report   97

Figure 3.35:  Saving a report

Once you save the report, the specified name for the report appears in the title
bar, as shown in Figure 3.36.

Figure 3.36:  Displaying the title of the report

98   Chapter 3: Power BI on Microsoft Stack

Publishing the Report

After designing a report in Power BI Desktop, you need to publish it to Power BI

Service to make it available for others. When you publish a report to Power BI
Service, it automatically creates a dataset into Power BI Service.

Perform the following steps to publish the report:

1. Click the Publish button under the Share section of the Home tab, as shown
in Figure 3.37.

Figure 3.37:  Clicking the Publish button

The Publish to Power BI dialog box appears.

2. Select the workspace from the Select a destination list box.
3. Click the Select button, as shown in Figure 3.38.

Figure 3.38:  The Publish to Power BI dialog box

The Publishing to Power BI message box appears displaying the progress bar of
publishing the report to Power BI, as shown in Figure 3.39.
 Creating a Report   99

Figure 3.39:  The Publishing to Power BI message box

Once the publishing is complete, you will receive the message “Publishing suc-
ceeded.” However, you will also receive a warning, stating that the published
report can not connect to the data source due to the unavailability of a gateway.
4. Click the Got it button to close the message box, as shown in Figure 3.40.

Figure 3.40:  Publishing succeeded message box

Note
We will learn about installing and configuring gateway in the next section.
100   Chapter 3: Power BI on Microsoft Stack

Gateway Setup

As discussed in the previous section, you need to install and configure an enter-
prise gateway to connect the published report to the data source. This section
covers the following topics:
1. Understanding gateways
2. Types of gateways
3. Downloading and installing the on-premises data gateway
4. Configuring gateway
5. Adding a data source

Understanding Gateways

A gateway is software that allows users to access data located on an on-premises

system or network so that it can be used in a cloud service later. Only authorized
users are permitted to access the gateway. Similar to a gatekeeper who allows
only authorized personnel to enter through the gate, the gateway attends all con-
nection requests but grants access only to those users who meet certain criteria.
Instead of using the entire database for creating reports and dashboards in Power
BI, a subset of data can be used and the entire database can be placed over the
on-premises network. Additional functions of a gateway include:
–– Encrypting the data passing through it
–– Compressing the data for secure access
–– Using passwords for establishing a connection to data sources

Types of Gateways

Power BI provides two types of gateways, both of which work in the same manner.
These gateways are listed below:
1. On-premises data gateway (personal mode)
2. On-premises data gateway

On-Premises Data Gateway (Personal Mode)

On-premises data gateway (personal mode) authenticates only one person to
connect to data sources. It does not allow sharing of reports. It can only be used by
Power BI. This gateway is for personal use wherein the user installs the gateway
on his/her computer and the data source is located on-premises.
 Gateway Setup   101

This type of gateway is ideal for situations as in the following example. If you
have a workbook that contains sales data for several years and you want to create
a Power BI dashboard that contains tiles displaying sales figures based on differ-
ent parameters. You are the owner of the report and use the same dataset for cre-
ating Power BI reports, you need an on-premises data gateway (personal mode).

Did You Know?

The on-premises data gateway (personal mode) is an updated version of the earlier personal
gateway called Power BI Gateway – Personal.

On-Premises Data Gateway

The on-premises data gateway can be used and shared by multiple users. This
type of gateway can be used by multiple services including Power BI, PowerApps,
and Azure Logic Apps, etc. It supports scheduled refresh as well as DirectQuery
for Power BI.
This setup is ideal for situations where you are working for an organization
that accesses data from different data sources including Analysis Services, SAP,
Oracle, and IBM, etc., and several people in the organization want to access the
database to create multitudes of reports. To gain access to these sources, you
need the on-premises data gateway to share the reports with several people in
the organization.

The following are some considerations while using on-premises data gateway:
1. You can not install a gateway on a domain controller.
2. You should not install a gateway on a laptop that could experience broken
internet connectivity.
3. You should avoid installing gateway on a system running on the wireless
network as it might affect its performance.

Downloading and Installing the On-Premises Data Gateway

After publishing a report in Power BI Service, you can access your report at the
https://app.powerbi.com link with your credentials. As you open the published
report, you will receive an error, as shown in Figure 3.41.
102   Chapter 3: Power BI on Microsoft Stack

Figure 3.41:  Displaying the error

From the above figure, you will see that visuals are not appearing in the report. This
is due to the inaccessibility of data gateway to reach the data source. This problem
can be rectified by installing an on-premises data gateway on the machine running
SQL Server and configuring it such that it can be used by Power BI.

Perform the following steps to download and install an on-premises data gateway:
1. Browse the following link:
https://app.powerbi.com/
2. Sign in to Power BI Service with the same credentials used in Power BI
Desktop.
3. Click the Download icon button. A list of options appears.
4. Click the Data Gateway option from the list of options, as shown in Figure 3.42.
 Gateway Setup   103

Figure 3.42:  Clicking the Data Gateway option

You are redirected to a link to download gateway.

5. Click the DOWNLOAD GATEWAY button, as shown in Figure 3.43.

Figure 3.43:  Download page

Once the download is complete, you will see the PowerBIGatewayInstaller.exe

file in the Downloads folder.
6. Double-click the PowerBIGatewayInstaller.exe in the Downloads folder.
The On-premises data gateway installer wizard appears.
7. Click the Next button to start data gateway installation, as shown in
Figure 3.44.
104   Chapter 3: Power BI on Microsoft Stack

Figure 3.44:  Starting the installation

The Choose the type of gateway you need page of the On-premises data
gateway installer wizard appears.
8. Select the On-premises data gateway (recommended) radio button to
install the on-premises data gateway.
9. Click the Next button, as shown in Figure 3.45.

Figure 3.45:  Selecting the gateway type

 Gateway Setup   105

The Getting ready to install the on-premises data gateway page appears, dis-
playing the progress of the installation, as shown in Figure 3.46.

Figure 3.46:  The Getting ready to install the on-premises data gateway page

The Reminder before you install page appears. This page provides a warning
and reminder about using the gateway.
10. Click the Next button, as shown in Figure 3.47.

Figure 3.47:  Reminder before installation

106   Chapter 3: Power BI on Microsoft Stack

The Getting ready to install the on-premises data gateway page appears.
11. Specify the path of directory where you want to install the gateway in the
Install to text box.
12. Click the I accept the terms of use and privacy statement checkbox.
13. Click the Install button, as shown in Figure 3.48.

Figure 3.48:  Specifying installation folder

The Installing your on-premises data gateway page appears providing status
and progress of the installation, as shown in Figure 3.49.

Figure 3.49:  Progress of installation of the data gateway

 Gateway Setup   107

The Almost done page of the On-premises data gateway installation wizard
appears stating that installation was successful. This page also states that you
need to sign in to register your gateway.

Configuring Gateway

Once the installation is successful, you need to configure the gateway so that it
can be used with Power BI. For configuring the gateway, you need to continue
with the steps followed in the earlier section “Downloading and Installing the
On-Premises Data Gateway.” Perform the following steps to configure/register
gateway:
1. Enter the email address with which you want to register your gateway in the
Email address to use with this gateway text box of the On-premises data
gateway window.
2. Click the Sign in button, as shown in Figure 3.50.

Figure 3.50:  Specifying the email address

108   Chapter 3: Power BI on Microsoft Stack

The Sign in window appears.

3. Enter the related password in the Password text box.
4. Click the Sign in button.

The next page of the On-premises data gateway window appears.

5. Select the Register a new gateway on this computer radio button to regis-
ter a new gateway.
6. Click the Next button, as shown in Figure 3.51.

Figure 3.51:  Specifying the type of gateway registration

The next page of the On-premises data gateway window asks you to specify
name and recovery key for the gateway.
7. Enter the name of a gateway in the New on-premises data gateway name
text box.
8. Enter the desired recovery key for the gateway in the Recovery key text box.
9. Enter the same recovery key in the Confirm recovery key text box.
 Gateway Setup   109

10. Click the Configure button, as shown in Figure 3.52.

Figure 3.52:  Configuring on-premises data gateway

Once the gateway is configured, you will see the status that “The gateway Demo-
Gateway is online and ready to be used.”
11. Click the Close button to close the On-premises data gateway window, as
shown in Figure 3.53.
110   Chapter 3: Power BI on Microsoft Stack

Figure 3.53:  Completion status of gateway configuration

Adding a Data Source

After installing the on-premises data gateway, you can add a data source (SQL
Server) to be used with the gateway. You can find the list of available gateways
under the GATEWAY CLUSTERS section of the Gateways window. The settings
related to the selected gateway cluster appear in the right pane of the Gateways
window.

Perform the following steps to add a data source to the gateway created earlier:
1. Launch Power BI Service.
2. Click the Settings icon button. A list of options appears.
3. Click the Manage gateways option, as shown in Figure 3.54.
 Gateway Setup   111

Figure 3.54:  Clicking the Manage gateways option

The Gateways window appears. In the left pane, you will see a list of available
gateways under the GATEWAY CLUSTERS section. The right pane displays infor-
mation about the selected gateway and other settings related to the gateway
under the Gateway Cluster Settings tab, as shown in Figure 3.55.
112   Chapter 3: Power BI on Microsoft Stack

Figure 3.55:  Gateway Cluster Settings

4. Click either Add data sources to use this gateway link or select the Ellipsis
icon (…) next to the gateway and click the ADD DATA SOURCE option from
the menu, as shown in Figure 3.56.

Figure 3.56:  Clicking the ADD DATA SOURCE option

5. Enter the desired name for the data source in the Data Source Name text
box.
6. Select the SQL Server option from the Data Source Type drop-down list to
connect the gateway to the SQL Server data source.
7. Enter the name of SQL Server where the database is present in the Server
text box.
8. Enter the same name of the database that you used earlier, in the Database
text box.
 Gateway Setup   113

9. Select the desired authentication method from the Authentication Method

drop-down list, as shown in Figure 3.57.

Figure 3.57:  Specifying data source settings

After you select an authentication method, the Username and Password fields
display.
10. Enter the relevant username in the Username text box.
11. Enter the applicable password in the Password text box.
12. Click the Add button, as shown in Figure 3.58.
114   Chapter 3: Power BI on Microsoft Stack

Figure 3.58:  Specifying username and password

As you click the Add button, the Connection Successful message appears,
which states that the connection has been established, as shown in Figure 3.59.

Figure 3.59:  Connection Successful message

13. Select the Users tab to add users to the created data source.
14. Specify the email address of the person that you want to allow to publish
reports using this data source.
 Gateway Setup   115

15. Click the Add button. The specified person is added to the list box, as shown
in Figure 3.60.

Figure 3.60:  Adding users

Once the gateway is configured properly, the visuals start appearing on the report,
as shown in Figure 3.61.
116   Chapter 3: Power BI on Microsoft Stack

Figure 3.61:  Displaying the report

Natural Language Querying

One of the prominent features of Power BI is that it supports natural language.

You can ask questions in natural language and Power BI will answer these ques-
tions in the form of charts and graphs. This feature is commonly termed as Q&A.

Note
Q&A should not be replaced with a search engine because Q&A provides results from the data
available in Power BI only while a search engine provides results from data available worldwide.

To use this feature, you should have some data in Power BI. If you do not have
data, you can connect to the samples available in Power BI Service. Perform the
following steps to connect to a sample:
1. Open Power BI Service.
2. Click the Get Data button in the left pane. The Get Data page appears in the
right pane.
3. Click the Samples link, as shown in Figure 3.62.
 Natural Language Querying   117

Figure 3.62:  Clicking the Samples link

A list of available samples appears.

4. Select the desired sample that you want to use. In our case, we have selected
Sales and Marketing Sample.

As you select a sample, a pane appears with the Connect button.

5. Click the Connect button, as shown in Figure 3.63.
118   Chapter 3: Power BI on Microsoft Stack

Figure 3.63:  Connecting to a sample

The Importing data message box appears displaying the progress of importing
data, as shown in Figure 3.64.

Figure 3.64:  The Importing data message box

The Success dialog box appears containing the Go to dashboard button.

6. Click the Go to dashboard button, as shown in Figure 3.65.
 Natural Language Querying   119

Figure 3.65:  The Success dialog box

The dashboard opens and displays the tiles pinned to the dashboard, as shown
in Figure 3.66.

Figure 3.66:  Displaying tiles on the dashboard

Perform the following steps to query Power BI in natural language:

1. Click on the Ask a question about your data text box. The Q&A page appears
with a list of keywords that can be used for querying Power BI for a solution,
as shown in Figure 3.67.
120   Chapter 3: Power BI on Microsoft Stack

Figure 3.67:  The Q&A page

2. Enter the desired query in the Ask a question about your data text box. In
our case, we have entered “count of product by manufacturer.” After we
enter the keywords, we receive the result in the form of a visual, as shown in
Figure 3.68.

Figure 3.68:  Viewing the result in the form of a visual

 Natural Language Querying   121

You can modify this visual as per your requirements. For example, to change the
visual, you just need to select another visual from the VISUALIZATIONS pane and
the data will be visualized in the updated visual, as shown in Figure 3.69.

Figure 3.69:  Viewing the updated visual

3. Click the Pin visual icon located in the upper right corner to pin this visual to
the dashboard as a tile. The Pin to dashboard dialog box appears.
4. Select either the Existing dashboard or the New dashboard radio button to
specify the dashboard where you want to pin this visual. In our case, we have
selected Existing dashboard.
5. Select the desired dashboard from the drop-down list.
6. Click the Pin button, as shown in Figure 3.70.
122   Chapter 3: Power BI on Microsoft Stack

Figure 3.70:  Pinning a visual to the dashboard

The Pinned to dashboard message box appears, which specifies that the created
visual is pinned to the selected dashboard. It also contains the Go to Dashboard
button that navigates you to the specified dashboard. The dashboard is now
updated with the created visual, as shown in Figure 3.71.

Figure 3.71:  Displaying the dashboard

 Data Refresh in Power BI   123

Data Refresh in Power BI

The point of using visuals to help communicate information about data being
captured is to help users in making better business decisions. Because of this,
you should always ensure that the data you are using for these Power BI reports is
accurate and updated. However, it is not possible to import the entire data repeat-
edly into Power BI and create reports on that data. After creating Power BI reports
with the data you have, you can set a scheduled refresh of that data so that your
Power BI reports and visualizations reflect the updated information. This also
eliminates the need to import the data repeatedly. You can also apply a manual
refresh to the data by clicking the Refresh button in Power BI to visualize the
updated data in your reports and dashboards.

In Power BI Service, a dataset is created automatically when:

1. Data is imported using the Get Data button from a content pack or file
2. The file is published from Power BI Desktop

The created dataset appears in My Workspace window in Power BI Service. You

can perform different operations related to a dataset including exploring the data
used in a report and setting up refresh by clicking the respective option from the
menu that appears when you click the Ellipsis icon (…) next to a dataset name
appearing under the Datasets tab.

Note
There could be multiple data sources for a single dataset.

A dataset contains:
–– Information about the data sources
–– Data source credentials
–– A subset of data taken from the data source

Note
When you update data in the data source and want to apply the same update to your visuals in
the report, you need to refresh data in Power BI. The data refresh updates the data in the dataset
stored in Power BI. This type of data refresh is called a full refresh.

The data refresh process contains the following steps:

1. You use either Refresh Now or set up a refresh schedule for refreshing data
in a dataset.
124   Chapter 3: Power BI on Microsoft Stack

2. Power BI connects with the associated data sources by using the available
information in the dataset.
3. Power BI queries the respective data sources for updated data.
4. Power BI loads the updated data into the dataset.
5. The visuals automatically update and display in your reports or dashboards
based on the latest data.

Additional Information
Other than data refresh, there are a few additional types of refresh available in Power BI as follows:
1. Package refresh: Refers to a type of refresh that synchronizes your Power BI Desktop and
Power BI Service and OneDrive. When you refresh data, the data remains at the original data
source, only the dataset is updated as per the update made to OneDrive or SharePoint Online.
2. Tile refresh: Updates the visuals for tiles pinned on the dashboard whenever there is a change
in data. Power BI checks for updated data every fifteen minutes. However, you can select the
Refresh dashboard tiles option from the menu that appears when you click the Ellipsis icon
(...) in a dashboard to apply tile refresh forcefully.
3. Visual container refresh: Updates the report visuals when you refresh the visual container.

Configuring Scheduled Refresh

You can apply a scheduled refresh by clicking the Schedule refresh icon or the
Settings option from the Ellipsis icon(…) next to the dataset name. For successful
configuration of a scheduled refresh, you need to set the following settings:
–– Gateway connection
–– Data source credentials
–– Schedule refresh

Perform the following steps to configure a scheduled refresh for a dataset:

1. Launch Power BI Service.
2. Select the My Workspace option from the left pane.
3. Select the Datasets tab in the right pane. You will see a list of available data-
sets.
4. Click the Schedule refresh icon beside the desired dataset, as shown in
Figure 3.72.
 Data Refresh in Power BI   125

Figure 3.72:  Clicking the Schedule refresh icon

The Settings page for the selected dataset appears.

5. Expand the Gateway connection node to display the settings related to a
gateway connection. The related settings appear.
6. Select the Use an on-prem data gateway radio button. You will see the
status as online.
7. Click the Apply button to apply the changes, as shown in Figure 3.73.
126   Chapter 3: Power BI on Microsoft Stack

Figure 3.73:  Setting Gateway connection

8. Expand the Data source credentials node. Here, you will see a message
stating that credentials are not required for Admin, as shown in Figure 3.74.

Figure 3.74:  Expanding the Data source credentials node

9. Expand the Scheduled refresh node. This is where you need to specify set-
tings related to a schedule refresh, including the frequency and time slots to
refresh the dataset.
10. Drag the slider under the Keep your data up to date section to change its
status to On.
11. Select the desired frequency for a refresh from the Refresh frequency drop-
down list.
12. Select the desired time zone from the Time zone drop-down list.
13. Click the Send refresh failure notification email to me checkbox so that
you receive an email if the refresh has failed.
 Data Refresh in Power BI   127

14. Click the Apply button, as shown in Figure 3.75.

Figure 3.75:  Configuring scheduled refresh

After you click the Apply button, the scheduled refresh is configured.
When the data is loaded through DirectQuery, a direct connection is estab-
lished between Power BI and the database. Power BI thus queries the database
directly whenever you interact with any visual on a report. The refresh frequency
for the dataset created using DirectQuery is set to 1 hour by default. However,
you can change it as per your requirements by changing the frequency in the
Refresh frequency drop-down list and then clicking the Apply button, as shown
in Figure 3.76.
128   Chapter 3: Power BI on Microsoft Stack

Figure 3.76:  Setting refresh frequency

You can also see the refresh history by clicking the Refresh history link. This
opens the Refresh history dialog box and displays the history of data refresh, as
shown in Figure 3.77.

Figure 3.77:  The Refresh history dialog box

 Creating Content Packs   129

Creating Content Packs

A content pack is a complete package of your dashboard, report, and dataset that
can be shared with other users in your organization. You can create the content
pack and publish it to the team. After you publish the content pack, it becomes
available in a centralized repository called AppSource. This repository helps
team members easily locate reports and datasets published for them.

Note
The reports and datasets published as content packs possess Power BI features, including sup-
port for data exploration, data refresh, visuals, and Q&A.

You can locate content packs in the central repository only when you are a member
of a group, such as the entire organization, distribution group, security group, or
Office 365 group, to which the content pack is published. You should note that
the content pack data is read-only for all members of the group. However, you can
copy reports to use them as a base for a personalized version of the content pack.

Note
You should have a Power BI Pro account for creating and accessing an organizational content
pack.

Perform the following steps to create and publish a content pack:

1. Launch Power BI Service.
2. Click the Settings icon button. A drop-down menu appears.
3. Click the Create content pack button in the drop-down menu, as shown in
Figure 3.78.
130   Chapter 3: Power BI on Microsoft Stack

Figure 3.78:  Creating a content pack

The Create content pack page appears.

4. Select either the Specific groups radio button to allow a specific group to
access this content pack or select the My entire organization radio button
to allow the entire organization to access this content pack.
5. Enter the desired title for the content pack in the Title text box.
6. Enter the desired description for the content pack in the Description text
box.
7. Click the Upload icon to upload an image for the content pack, as shown in
Figure 3.79.
 Creating Content Packs   131

Figure 3.79:  Clicking the Upload link

The Open dialog box appears.

8. Navigate to the location where the image is located.
9. Select the image.
10. Click the Open button to upload the image, as shown in Figure 3.80.
132   Chapter 3: Power BI on Microsoft Stack

Figure 3.80:  Uploading an image

The selected image is uploaded.

11. Select the desired dashboard to be published in the Dashboards list box. The
related report and dataset are automatically selected from the Reports and
the Datasets list boxes, respectively.
12. Click the Publish button, as shown in Figure 3.81.

Figure 3.81:  Publishing a content pack

 Power BI Integration with Cortana Suite   133

A pop-up appears stating that the content pack is published successfully and
added to the organization’s content gallery.

Power BI Integration with Cortana Suite

As you know, Cortana is a feature of Windows 10 that gives relevant results to

your queries made in natural language. Cortana can be integrated with Power BI
to provide relevant information directly from Power BI dashboards and reports.
When you integrate Cortana with Power BI, Cortana also looks into Power BI
dashboards and reports for the related keywords each time you query Cortana.

To integrate Power BI with the Cortana suite, you need the following:
–– A system running Windows 10 with version 1511 or later
–– The Cortana feature to be turned on
–– A Power BI account
–– An Azure Active Directory (Azure AD)/Work or School account
–– One or more datasets configured such that they can be used with Cortana

Creating a Cortana Answer Page and Publishing It

While integrating Power BI with Cortana, it is advisable to set the size of the report
specifically for Cortana, which is called the Cortana answer page.

Perform the following steps to create a Cortana answer page:

1. Open the desired PBIX file that you want to use as a Cortana answer page.
2. Click the Format icon.
3. Expand the Page Size category.
4. Select the Cortana option from the Type drop-down list under the Page Size
category.
5. Expand the Page Information category.
6. Enter the desired name for the report in the Name text box.
7. Drag the slider to change the status of the Q&A option to On.
8. Enter the keywords/alternate names in the text box below the Q&A option, as
shown in Figure 3.82.
134   Chapter 3: Power BI on Microsoft Stack

Figure 3.82:  Creating a Cortana answer page

9. Click the Save button to save your changes.

10. Click the Publish button under the Share section to publish the created
report.

The Sign in dialog box displays.

11. Enter the email address in the Sign in text box.
12. Click the Sign in button, as shown in Figure 3.83.
 Power BI Integration with Cortana Suite   135

Figure 3.83:  The Sign in dialog box

The Sign in to your account dialog box appears.

13. Enter the relevant password in the Enter password text box.
14. Click the Sign in button, as shown in Figure 3.84.

Figure 3.84:  The Sign in to your account dialog box

The Publish to Power BI dialog box appears.

15. Select the desired destination from the Select a destination list box.
136   Chapter 3: Power BI on Microsoft Stack

16. Click the Select button, as shown in Figure 3.85.

Figure 3.85:  The Publish to Power BI dialog box

The Publishing to Power BI dialog box appears.

17. Click the Got it button to close the dialog box.

The report has now been published in Power BI Service.

Enabling Cortana to Access the Dataset

Cortana can easily access Power BI reports. For this, you need to select the
“Enable Cortana to access this dataset” checkbox to enable the related dataset of
the report. It allows users with access to the dataset to get answers from Cortana.

Perform the following steps to enable Cortana to access the dataset:

1. Browse the following link:
https://app.powerbi.com/

The Sign in to your account page appears.

2. Enter the email address that you used with Power BI Desktop for publishing
the report in the Sign in text box.
3. Click the Next button, as shown in Figure 3.86.
 Power BI Integration with Cortana Suite   137

Figure 3.86:  The Sign in to your account page

4. Enter the relevant password in the Enter password text box.

5. Click the Sign in button, as shown in Figure 3.87.

Figure 3.87:  Signing in to Power BI Service

6. Select the My Workspace option from the left pane.

138   Chapter 3: Power BI on Microsoft Stack

7. Select the Reports tab in the right pane. The available reports are displayed
under the Reports tab.
8. Click the View related ( ) icon next to the name of the report that you want
to allow Cortana to access, as shown in Figure 3.88.

Figure 3.88:  Clicking the View related icon

The Related content pane appears displaying the dashboards and datasets, as
shown in Figure 3.89.

Figure 3.89:  The Related content pane

9. Select the Ellipsis icon (...). A drop-down menu appears.

10. Select the Settings option from the drop-down menu, as shown in Figure 3.90.
 Power BI Integration with Cortana Suite   139

Figure 3.90:  Selecting the Settings option

The Settings page appears with the related settings of the selected dataset.
11. Expand the Q&A and Cortana option.
12. Select the Allow Cortana to access this dataset checkbox.
13. Click the Apply button, as shown in Figure 3.91.
140   Chapter 3: Power BI on Microsoft Stack

Figure 3.91:  Allowing Cortana to access the dataset

Cortana is now allowed to access the dataset.

Adding Power BI Credentials to Windows 10

As discussed earlier, Cortana is a feature of Windows 10. Therefore, you need to

connect to Windows 10 through Power BI credentials for integrating Power BI
with Cortana. You just need Windows 10 with version 1511 or later.

Note
You can check the version of Windows 10 by navigating to Start Settings System About. The
About page shows the Windows Edition and Version under the Windows specifications section.

Perform the following steps to add Power BI credentials to Windows 10:

1. Click the Start button. The Start menu appears.
2. Click the Settings icon, as shown in Figure 3.92.
 Power BI Integration with Cortana Suite   141

Figure 3.92:  Clicking the Settings icon

The Settings window appears.

3. Click the Accounts link, as shown in Figure 3.93.

Figure 3.93:  Clicking the Accounts link

142   Chapter 3: Power BI on Microsoft Stack

A page with related account settings appears.

4. Select the Access work or school tab under the Accounts section. The
Access work or school page appears in the right pane.
5. Click the Connect button, as shown in Figure 3.94.

Figure 3.94:  Clicking the Connect button

The Microsoft account window appears.

6. Click the Join this device to Azure Active Directory link, as shown in
Figure 3.95.
 Power BI Integration with Cortana Suite   143

Figure 3.95:  Clicking the Join this device to Azure Active Directory link

The Sign in page appears.

7. Enter the email address in the Email address text box.
8. Click the Next button.

The next page appears.

9. Enter the applicable password in the Enter password text box.
10. Click the Sign in button.

You are connected with the specified credentials, as shown in Figure 3.96.
144   Chapter 3: Power BI on Microsoft Stack

Figure 3.96:  Displaying the new account

Accessing the Report through Cortana

Once you have created the new account, you can switch to Power BI account to
access Power BI reports through Cortana, as shown in Figure 3.97.
 Power BI Integration with Cortana Suite   145

Figure 3.97:  Switching to Power BI account

Perform the following steps to access the Power BI report through Cortana:
1. Press the Windows + S key combination on the keyboard.
2. Type the desired keywords in the Type here to search text box. In our case,
we have typed Leads revenue by Employee.

As we type the keywords, the associated Power BI report is shown in the Cortana
Search box, as shown in Figure 3.98.
146   Chapter 3: Power BI on Microsoft Stack

Figure 3.98:  Displaying the search result

3. Click the report. The visuals of the report are shown in the Cortana Search
box, as shown in Figure 3.99.
 Power BI Integration with Cortana Suite   147

Figure 3.99:  Displaying the visuals of the report

4. Click the Open in Power BI link to open the report into Power BI, as shown
in Figure 3.100.
148   Chapter 3: Power BI on Microsoft Stack

Figure 3.100:  Clicking the Open in Power BI link

The selected report opens in Power BI Service, as shown in Figure 3.101.

 Summary   149

Figure 3.101:  Opening the report in Power BI Service

Summary

Power BI is a business intelligence and reporting tool that allows users to create
intuitive reports. It supports many data sources including Excel, SQL Server,
PostgreSQL, Dynamics CRM, and MySQL. This chapter focused on integrating
Power BI with SQL Server. The two options, that is, using the Import option and
the DirectQuery option, for getting data into Power BI from SQL Server were dis-
cussed. Both the options of establishing a relationship between tables were also
elaborated. This chapter provided in-depth information about using DAX expres-
sions and creating calculated columns and tables. You also became familiar with
the process of creating a report wherein data was loaded to Power BI through
the Import option and the DirectQuery option. A gateway, a software that allows
150   Chapter 3: Power BI on Microsoft Stack

users to access data located on an on-premises system or network so that it can

be used in a cloud service later, was set up on the machine on which SQL Server
was installed. This chapter also provided in-depth information about data refresh
in Power BI and provided a step-by-step procedure for creating a content pack.
The last part of the chapter provided detailed information about the integration
of Power BI with Cortana.
Chapter 4
Power BI on Open Source Stack
PostgreSQL is an open source object-relational database management system
(ORDBMS). It is based on POSTGRES, which was introduced at Berkeley Com-
puter Science Department at the University of California. The idea behind using
the name PostgreSQL was to highlight the relationship between POSTGRES and
SQL. This means that a large set of SQL standards are supported by PostgreSQL.
In addition, PostgreSQL also supports:
–– Triggers
–– Views
–– Complicated queries
–– Foreign keys
–– Transactional integrity
–– Concurrency control

This chapter provides a step-by-step guide to integrating Power BI with Post-

greSQL and creating reports in Power BI through the PostgreSQL database.

Integrating PostgreSQL with Power BI

As discussed in Chapter 1, Power BI is a business intelligence and reporting tool

that can be integrated with hundreds of data sources. PostgreSQL is the most
advanced open source database available today. You can integrate PostgreSQL
with Power BI to analyze and visualize data and create interactive reports based
on the available data.

To integrate PostgreSQL with Power BI, you will need the following:
–– PostgreSQL
–– PostgreSQL database
–– Npgsql connector
–– Power BI Desktop

Downloading and Installing Npgsql Connector

Npgsql is an open source ADO.NET Data Provider or connector that allows Power
BI users to connect to PostgreSQL database.

DOI 10.1515/9781547400720-004
152   Chapter 4: Power BI on Open Source Stack

Perform the following steps to download and install the Npgsql connector:
1. Visit the following link to download the latest version of Npgsql:
https://github.com/npgsql/Npgsql/releases
2. Click the Npgsql-3.2.7.msi link to download the .msi file.

The selected file will download and display in the Downloads folder on your
computer.
3. Navigate to the Downloads folder and locate the downloaded file.
4. Double-click the Npgsql-3.2.7.msi file.

The Welcome to the Npgsql 3.2.7 Setup Wizard page of the Npgsql 3.2.7 Setup
wizard appears.
5. Click the Next button to start the installation, as shown in Figure 4.1.

Figure 4.1:  The Npgsql 3.2.7 Setup wizard

The End-User License Agreement page appears.

6. Click the I accept the terms in the License Agreement checkbox.
7. Click the Next button to continue the installation, as shown in Figure 4.2.
 Downloading and Installing Npgsql Connector   153

Figure 4.2:  Accepting the license agreement

The Custom Setup page appears.

8. Click the Npgsql GAC Installation button. A list of options appears.
9. Select the Entire feature will be installed on local hard drive option.
10. Click the Next button, as shown in Figure 4.3.

Figure 4.3:  The Custom Setup page

154   Chapter 4: Power BI on Open Source Stack

The Ready to install Npgsql 3.2.7 page appears.

11. Click the Install button, as shown in Figure 4.4.

Figure 4.4:  The Ready to install Npgsql 3.2.7 page

The Installing Npgsql 3.2.7 page displays the progress of the Npgsql 3.2.7 instal-
lation, as shown in Figure 4.5.

Figure 4.5:  The Installing Npgsql 3.2.7 page

 Getting Data into Power BI   155

The Completed the Npgsql 3.2.7 Setup Wizard page appears.

12. Click the Finish button to exit the Npgsql 3.2.7 Setup Wizard, as shown in
Figure 4.6.

Figure 4.6:  Finishing the Npgsql 3.2.7 Setup Wizard

After clicking the Finish button, the connector has been installed successfully.

Getting Data into Power BI

The first task in the process of creating a report is getting data from PostgreSQL
into Power BI.

Perform the following steps to get data from the PostgreSQL database:
1. Launch Power BI Desktop.
2. Click the upper part of the Get Data button under the External data section
of the Home tab, as shown in Figure 4.7.
156   Chapter 4: Power BI on Open Source Stack

Figure 4.7:  Clicking the upper part of the Get Data button

The Get Data dialog box appears.

3. Select the All option from the left pane.
4. Select the PostgreSQL database option from the right pane.
5. Click the Connect button, as shown in Figure 4.8.

Figure 4.8:  Connecting to PostgreSQL database

The PostgreSQL database dialog box appears.

6. Enter the name of the server in the Server text box.
7. Enter the name of the database in the Database text box.
8. Click the OK button, as shown in Figure 4.9.
 Getting Data into Power BI   157

Figure 4.9:  The PostgreSQL database dialog box

The Navigator dialog box appears.

9. From the Display Options section, select the tables that you want to import
to Power BI Desktop. A view of the selected table appears in the right pane of
the Navigator window.
10. Click the Load button, as shown in Figure 4.10.

Figure 4.10:  Loading tables into Power BI

158   Chapter 4: Power BI on Open Source Stack

The selected tables load into Power BI Desktop and appear in the FIELDS pane,
as shown in Figure 4.11.

Figure 4.11:  Displaying loaded tables

Data Modeling

After loading the data tables into Power BI, you need to shape data such that it
can be used for creating intuitive reports. The way the data is shaped in Power
BI is called data modeling. For example, if you have multiple tables from differ-
ent data sources, you will need to create a relationship between these tables to
use the data from these tables. You may also need to change the data type for
a column, add or delete a new column or row, create a calculated column that
returns a result based on data available in other columns, create a measure, and
create a calculated table. All these operations fall within data modeling.

This section covers the following processes:

–– Creating a relationship between tables
–– DAX
–– Creating a calculated column
 Data Modeling   159

Creating Relationship between Tables

The process of creating a relationship between tables is similar to the process

discussed in Chapter 2. You can either use the Autodetect feature to automatically
create a relationship between tables, or you can create it manually. You can also
edit the relationship between tables as per your requirements. The relationship
created between tables can be viewed from the Relationships view.

Using the Autodetect feature

Perform the following steps to create a relationship using the Autodetect feature:
1. Click the Manage Relationships button under the Relationships section of
the Home tab, as shown in Figure 4.12.

Figure 4.12:  Clicking the Manage Relationships button

The Manage relationships window appears.

2. Click the Autodetect button to automatically detect relationships, as shown
in Figure 4.13.

Figure 4.13:  Using the Autodetect button

160   Chapter 4: Power BI on Open Source Stack

The Detecting relationships message box displays the progress of detecting

relationships between tables. The Autodetect message box appears once the
detection is done.
3. Click the Close button to close the Autodetect message box.

The Manage relationships window appears displaying the relationships

between different tables, as shown in Figure 4.14.

Figure 4.14:  The Manage relationships window with relationships

In the figure above, you can see that each successful relationship has active
checkbox in the Active column.
4. Click the Close button to close the Manage relationships window.

You can see the relationships between tables in the Relationships view, as
shown in Figure 4.15.
 Data Modeling   161

Figure 4.15:  Viewing relationship in Relationships view

Creating Relationships Manually

Be aware that the Autodetect feature does not detect all relationships between
all tables. Therefore, to create a relationship between tables that were missed by
the Autodetect feature, you need to manually create the relationship. Perform the
following steps to manually create a relationship:
1. Click the Manage Relationships button under the Relationships section of
the Home tab. The Manage relationships window appears.
2. Click the New button to manually create relationships. The Create relation-
ship dialog box appears.
3. Select the desired table from the first drop-down list. A list of columns asso-
ciated with the selected table appears.
4. Select the column that you want to relate to another column.
5. Select another table from the second drop-down list. A list of columns asso-
ciated with the selected table appears.
6. Select the column that you want to relate to the column selected in the first
table.
7. Select the desired option from the Cardinality drop-down list to specify car-
dinality for the relationship.
8. Select the desired option from the Cross filter direction drop-down list.
9. Select the Make this relationship active checkbox to activate the relation-
ship.
10. Click the OK button, as shown in Figure 4.16.
162   Chapter 4: Power BI on Open Source Stack

Figure 4.16:  The Create relationship dialog box

The Manage relationships window appears and displays the new relationship.
11. Click the Close button to close the Manage relationships window.
12. Click the Relationships view to analyze the relationship between the
selected tables.

Note
Cardinality is the degree of relationship, which specifies the number of occurrences of the first
table linked to the number of occurrences of the second table.
Cross filter direction specifies the direction of filter applied to the tables of relationships.

Data Analysis Expressions

Data Analysis Expressions (DAX) is an expression (a set of functions, constants,

and operators) written to apply calculations on data available in your model. The
calculated data can be used for creating visuals. DAX expressions are commonly
used to create calculated columns and calculated tables. There are three elements
of DAX, including syntax, function, and context.
 Data Modeling   163

Note
A detailed description of the elements of DAX is covered in Chapter 2.

Creating a Calculated Column

A calculated column, as the name indicates, is a column that has a calculation

applied to it. These calculations are applied in the form of DAX formulas. For
example, if we have a table that contains employee details including first name,
last name, address, phone number, and joining date, and we want the full name
of each employee for our report, we would create a calculated column that con-
tains the full name of each employee by using a DAX formula to join both strings.
After creating the calculated column, we can use it in our report, just as we can
with other columns. The created calculated column appears in the FIELDS pane
similar to other columns. You can also assign the required name for the calcu-
lated column.

Perform the following steps to create a calculated column that concatenates the
FirstName and LastName fields:
1. Click the New Column button under the Calculations section of the Model-
ing tab. A new column is added to the selected table in the FIELDS pane, and
the formula bar appears above the Report canvas, as shown in Figure 4.17.

Figure 4.17:  Displaying the formula bar

Note
The formula bar is the actual area where a DAX formula can be specified.

2. Enter the DAX formula in the formula bar, as shown in Figure 4.18.

Figure 4.18:  Using DAX formula

From the above figure, we can see the following:

a. Name is the name of the calculated column.
b. CONCATENATE is the name of the function that concatenates two
strings.
164   Chapter 4: Power BI on Open Source Stack

c. person person[firstname] states the firstname column in the person

person table.
d. person person[lastname] states the lastname column in the person
person table.
3. Click the OK ( ) icon to accept the changes.

After clicking the OK ( ) icon, the calculated column is created in the selected
table in the FIELDS pane, as shown in Figure 4.19.

Figure 4.19:  Displaying the calculated column

You can review the visual for the calculated column by selecting the desired
visual from the VISUALIZATIONS pane and selecting fields to be displayed in the
visual from the FIELDS pane, as shown in Figure 4.20.
 Creating a Report   165

Figure 4.20:  Creating a visual for the calculated column

Creating a Report

Once you are done with the process of getting data from the PostgreSQL database
and applying data modeling changes, you can create a report containing visuals
in Power BI Desktop. We have created a report shown in Figure 4.21.

Figure 4.21:  Creating a report

166   Chapter 4: Power BI on Open Source Stack

To create the above report, we performed the tasks listed below:

1. Set Report page details:
a. Click the Format ( ) icon.
b. Expand the Page Information option. The related options appear.
c. Enter the name of report page in the Name text box, as shown in
Figure 4.22.

Figure 4.22:  Setting related to the Page Information page

d. Expand the Page Size option.

e. Select the page size from the Type drop-down list.
f. Expand the Page Background option.
g. Click the Color drop-down button. The Theme colors palette appears.
h. Select the color from the Theme colors palette.
i. Set the Transparency option to 0%, as shown in Figure 4.23.
 Creating a Report   167

Figure 4.23:  Setting report page details

2. Add and format an image (Power BI logo):

a. Click the Image button under the Insert section of the Home tab. The
Open dialog box appears.
b. Navigate to the location where the image is saved.
c. Select the image.
d. Click the Open button. The selected image is inserted into the report
page and the FORMAT IMAGE pane appears.
e. Expand the Scaling option.
f. Select the Normal option from the Scaling drop-down list.
g. Drag the slider for the Background option to change its status to On.
h. Expand the Background option to view settings related to the back-
ground.
i. Click the Color drop-down button. The Theme colors palette appears.
j. Select the color from the Theme colors palette.
k. Set the Transparency option to 0%, as shown in Figure 4.24.
168   Chapter 4: Power BI on Open Source Stack

Figure 4.24:  Setting scaling and background

l. Expand the General option. The related settings appear.

m. Set the value of width in the Width text box.
n. Set the value of height in the Height text box, as shown in Figure 4.25.

Figure 4.25:  Specifying settings related to the General option

3. Add and format a text box:

a. Click the Text box button under the Insert section of the Home tab. A
text box is inserted, and a formatting toolbar appears.
b. Enter the “Sales by Region” text.
c. Select the text.
 Creating a Report   169

d. Select the font from the Font drop-down list in the formatting toolbar.
e. Select the font size from the Font Size drop-down list in the format-
ting toolbar.
f. Click the B button to apply the bold style for the selected text.
g. Click the Center button to centralize the text, as shown in Figure 4.26.

Figure 4.26:  Formatting toolbar

h. Drag the slider for the Background option to change its status to On
in the VISUALIZATIONS pane.
i. Expand the Background option to view settings related to the background.
j. Click the Color drop-down button. The Theme colors palette appears.
k. Select the color from the Theme colors palette.
l. Set the Transparency option to 0%.
m. Expand the General option. The related settings appear.
n. Set the values for the X Position, Y Position, Width, and Height text
boxes, as shown in Figure 4.27.

Figure 4.27:  Specifying settings in the VISUALIZATIONS pane

170   Chapter 4: Power BI on Open Source Stack

4. Add and format a card visual:

a. Click the Card visual from the VISUALIZATIONS pane. The selected
visual appears in the report page.
b. Drag the orderdate field from the sales salesorderheader table and
drop it into the Fields value.
c. Click the Fields drop-down button. A context menu appears.
d. Select the Earliest option from the context menu. The card visual that
you inserted into the report page starts displaying the earliest date.
e. Click the Format icon to set the formatting settings.
f. Expand the Data label option and specify the settings, as shown in
Figure 4.28.

Figure 4.28:  Specifying data label settings

g. Drag the slider for the Title option to change its status to On.
h. Expand the Title option and set the related settings, as shown in
Figure 4.29.
 Creating a Report   171

Figure 4.29:  Specifying settings related to the Title option

i. Drag the slider for the Background option to change its status to On.
j. Set the color and transparency, as shown in Figure 4.30.

Figure 4.30:  Specifying background settings

k. Expand the General option and set the related settings, as shown in
Figure 4.31.
172   Chapter 4: Power BI on Open Source Stack

Figure 4.31:  Specifying the General settings

5. Add the Slicer visual to display the country name:

a. Click the Slicer visual from the VISUALIZATIONS pane. The selected
visual appears in the report page.
b. Drag the name field from the person countryregion table and drop
it into the Field value.
c. Drag the countryregioncode field from the person countryregion
table and drop it into the Report level filters value.
d. Select the Basic filtering option from the Filter type drop-down list.
e. Select the checkboxes next to the country region codes. The name of
the selected checkboxes will appear under the Report level filters
section, as shown in Figure 4.32.
 Creating a Report   173

Figure 4.32:  Applying basic filtering

f. Click the Format icon to set the formatting settings.

g. Expand the General option and specify the settings, as shown in
Figure 4.33.

Figure 4.33:  Specifying settings for the General option

174   Chapter 4: Power BI on Open Source Stack

h. Expand the Items option and specify the settings, as shown in Figure
4.34.

Figure 4.34:  Specifying settings for the Items option

i. Drag the slider for the Title option to change its status to On.
j. Specify the settings related to the Title option, as shown in Figure
4.35.

Figure 4.35:  Specifying the settings related to the Title option

k. Drag the slider for the Background option to change its status to On.
 Creating a Report   175

l. Specify the settings related to the Background option, as shown in

Figure 4.36.

Figure 4.36:  Specify settings related to the Background option

6. Add the Slicer visual to display the State name related to the country selected
in the Country slicer:
a. Click the Slicer visual from the VISUALIZATIONS pane. The selected
visual appears in the report page.
b. Drag the name field from the person stateprovince table and drop it
into the Field value.
c. Click the Format icon to set the formatting settings.
d. Expand the General option and specify the settings, as shown in
Figure 4.37.

Figure 4.37:  Specifying settings for the General option

176   Chapter 4: Power BI on Open Source Stack

e. Expand the Items option and specify the settings, as shown in Figure
4.38.

Figure 4.38:  Specifying settings for the Items option

f. Drag the slider for the Title option to change its status to On.
g. Specify the settings related to the Title option, as shown in Figure 4.39.

Figure 4.39:  Specifying the settings related to the Title option

h. Drag the slider for the Background option to change its status to On.
i. Specify the settings related to the Background option, as shown in
Figure 4.40.
 Creating a Report   177

Figure 4.40:  Specify settings related to the Background option

7. Add a Pie chart to visualize the subtotal filtered by city and format it:
a. Click the Pie chart visual from the VISUALIZATIONS pane. The
selected visual appears in the report page.
b. Drag the city field from the person address table and drop it into the
Legend value.
c. Drag the subtotal field from the sales salesorderheader table and
drop it into the Values value.
d. Click the Format icon to set the formatting settings.
e. Drag the slider for the Title option to change its status to On, expand
it, and specify the settings, as shown in Figure 4.41.

Figure 4.41:  Specifying settings for the Title option

f. Drag the slider for the Background option to change its status to On.
178   Chapter 4: Power BI on Open Source Stack

g. Specify the settings related to the Background option, as shown in

Figure 4.42.

Figure 4.42:  Specifying settings for the Background option

h. Expand the General option and specify settings related to it, as shown
in Figure 4.43.

Figure 4.43:  Specifying settings related to the General option

 Creating a Report   179

8. Add a Clustered column chart to visualize the total due filtered by city and
format it:
a. Click the Clustered column chart visual from the VISUALIZATIONS
pane. The selected visual appears in the report page.
b. Drag the city field from the person address table and drop it into the
Axis value.
c. Drag the totaldue field from the sales salesorderheader table and
drop it into the Value.
d. Click the Format icon to set the formatting settings.
e. Expand the General option and specify settings related to it, as shown
in Figure 4.44.

Figure 4.44:  Specifying settings related to the General option

f. Drag the slider for the Title option to change its status to On, expand
it, and specify the settings, as shown in Figure 4.45.
180   Chapter 4: Power BI on Open Source Stack

Figure 4.45:  Specifying settings for the Title option

g. Drag the slider for the Background option to change its status to On.
h. Specify the settings related to the Background option, as shown in
Figure 4.46.

Figure 4.46:  Specifying settings for the Background option

9. Add a table that displays the details of subtotal and total due per customer:
a. Click the Table visual from the VISUALIZATIONS pane. The selected
visual appears in the report page.
b. Drag the customerid field from the sales salesorderheader table,
drop it into the Values value, and rename customerid to Custome-
rid.
c. Drag the Name field from the person table and drop it into the Values
value.
d. Drag the city field from the person address table, drop it into the
Values value, and rename city to City.
 Creating a Report   181

e. Drag the name field from the person stateprovince table, drop it into
the Values value, and rename name to State.
f. Drag the name field from the person countryregion table, drop it
into the Values value, and rename name to Country.
g. Drag the orderdate field from the sales salesorderheader table,
drop it into the Values value, and rename orderdate to Order date.
h. Drag the subtotal field from the sales salesorderheader table, drop
it into the Values value, and rename subtotal to Subtotal.
i. Drag the totaldue field from the sales salesorderheader table, drop
it into the Values value, and rename totaldue to Total Due, as shown
in Figure 4.47.

Figure 4.47:  Adding values for the Table visual

j. Click the Format icon to set the formatting settings.

k. Expand the General option and specify settings related to it, as shown
in Figure 4.48.
182   Chapter 4: Power BI on Open Source Stack

Figure 4.48:  Specifying settings related to the General option

l. Expand the Table style option and select the Minimal option from
the Style drop-down list, as shown in Figure 4.49.

Figure 4.49:  Setting the table style

m. Expand the Grid option and set the settings, as shown in Figure 4.50.
 Creating a Report   183

Figure 4.50:  Specifying settings related to the Grid option

n. Expand the Column headers option and specify the settings related
to it, as shown in Figure 4.51.

Figure 4.51:  Settings related to the Column headers option

184   Chapter 4: Power BI on Open Source Stack

o. Expand the Values option and set the related settings, as shown in
Figure 4.52.

Figure 4.52:  Specifying settings related to the Values option

p. Expand the Total option and specify the related settings, as shown in
Figure 4.53.

Figure 4.53:  Specifying settings related to the Total option

q. Drag the slider to set the value of the Background option to On,
expand it, and set the related settings, as shown in Figure 4.54.
 Creating a Report   185

Figure 4.54:  Specifying settings related to the Background option

Saving the Report

It is a good practice to save a report regularly. Perform the following steps to save
the report:
1. Select the File tab from the Ribbon. The Backstage View appears.
2. Select the Save As option from the Backstage View. The Save As dialog box
appears.
3. Select the location wherein you want to save the report.
4. Type the desired name for the report in the File name text box.
5. Click the Save button, as shown in Figure 4.55.

Figure 4.55:  Saving a report

The report is saved with the specified name.

186   Chapter 4: Power BI on Open Source Stack

Publishing the Report

You can publish a report created in Power BI Desktop to Power BI Service and
make the report accessible to others.

Perform the following steps to publish a report:

1. Open the report in Power BI Desktop.
2. Click the Publish button under the Share section of the Home tab, as shown
in Figure 4.56.

Figure 4.56:  Publishing a report

The Publish to Power BI dialog box appears.

3. Select the desired destination from the Select a destination text area.
4. Click the Select button, as shown in Figure 4.57.

Figure 4.57:  The Publish to Power BI dialog box

 Publishing the Report   187

The Publishing to Power BI dialog box displays the status of publishing the
report to Power BI, as shown in Figure 4.58.

Figure 4.58:  Displaying the status of publishing the report

Once publishing is successful, the Publishing to Power BI dialog box displays

the Success message. You can open the report in Power BI by clicking the Open
‘PostgreSQLReport.pbix’ in Power BI link.
5. Click the Got it button, as shown in Figure 4.59.

Figure 4.59:  The Publishing to Power BI dialog box

188   Chapter 4: Power BI on Open Source Stack

The report is published successfully to Power BI Service, as shown in Figure 4.60.

Figure 4.60:  Displaying the published report

Data Refresh in Power BI

Displaying the most up to date information helps users in making better business
decisions. Therefore, you should always use accurate and updated data for cre-
ating reports in Power BI. This can be done by creating a report, publishing it to
Power BI Service, and using the data refresh functionality of Power BI to update
data in the reports. You can also set a scheduled refresh in Power BI to automat-
ically update visuals when there is an update in data. You can also manually
refresh the reports by clicking the Refresh button in Power BI.
In Power BI Service, a dataset is a subset of data taken from the data source
and includes information about the data sources and their credentials. A dataset
is created automatically and appears under the Datasets tab in Power BI Service.
 Data Refresh in Power BI   189

Setting Up Scheduled Refresh

You can apply a scheduled refresh by either using the Schedule refresh icon next
to the dataset name, or by using the Settings option from the menu that appears
when you click the Ellipsis icon (…) next to the dataset name. For successful con-
figuration of a scheduled refresh, you need to set the following settings:
–– Gateway connection
–– Data source credentials
–– Schedule refresh

Gateway Setup
A gateway is piece of software that allows users to access data located on an
on-premises system or network so that it can be used in a cloud service later. Only
authorized users are permitted to access the gateway. Similar to a gatekeeper who
allows only authorized personnel to gain entry, the gateway attends all connec-
tion requests but grants access to only those users who meet certain criteria.

Power BI provides the following two types of gateways:

–– On-premises data gateway (personal mode): Allows only one person to
connect to data sources, does not allow sharing of reports, and it can only be
used by Power BI. This gateway is for personal use wherein the user installs
the gateway on his/her computer and the data source is located on-premises.
–– On-premises data gateway: Can be used and shared by multiple users. This
type of gateway can be used by multiple services including Power BI, Pow-
erApps, and Azure Logic Apps, etc. It supports schedule refresh as well as
DirectQuery for Power BI.

You need to install a data gateway on the machine running PostgreSQL and con-
figure it such that it can be used by Power BI.

Installing On-Premises Data Gateway

Perform the following steps to download and install an on-premises data gateway:
1. Browse to the following link:
https://app.powerbi.com/
2. Sign in to Power BI Service with the same credentials used in Power BI
Desktop.
3. Click the Download icon. A list of options appears.
4. Click the Data Gateway option, as shown in Figure 4.61.
190   Chapter 4: Power BI on Open Source Stack

Figure 4.61:  Clicking the Data Gateway option

The Power BI page displays a link to download Gateway.

5. Click the DOWNLOAD GATEWAY button, as shown in Figure 4.62.

Figure 4.62:  Download page

Once the download is complete, the PowerBIGatewayInstaller.exe file will

display in the Downloads folder.
6. Double-click the PowerBIGatewayInstaller.exe in the Downloads folder.
The On-premises data gateway installer wizard appears.
7. Click the Next button to start data gateway installation, as shown in Figure
4.63.
 Data Refresh in Power BI   191

Figure 4.63:  Starting the installation

The Choose the type of gateway you need page of the On-premises data
gateway installer wizard appears.
8. Select the On-premises data gateway (recommended) radio button to
install the on-premises data gateway.
9. Click the Next button, as shown in Figure 4.64.

Figure 4.64:  Selecting the gateway type

192   Chapter 4: Power BI on Open Source Stack

The Getting ready to install the on-premises data gateway page appears,
which displays the progress of collecting the required information and files to
install the on-premises data gateway, as shown in Figure 4.65.

Figure 4.65:  The Getting ready to install the on-premises data gateway page

The Reminder before you install page appears. This page gives warning for
using the gateway.
10. Click the Next button, as shown in Figure 4.66.

Figure 4.66:  Reminder before installation

 Data Refresh in Power BI   193

The Getting ready to install the on-premises data gateway page appears.
11. Specify the directory path wherein you want to install the gateway in the
Install to text box.
12. Click the I accept the terms of use and privacy statement checkbox.
13. Click the Install button, as shown in Figure 4.67.

Figure 4.67:  Specifying installation folder

The Installing your on-premises data gateway page displays the progress of
installing the data gateway, as shown in Figure 4.68.

Figure 4.68:  Progress of installation of the data gateway

194   Chapter 4: Power BI on Open Source Stack

The Almost done page of the On-premises data gateway installation wizard
appears stating that installation was successful. This page also states that you
need to sign in to register your gateway.

Configuring Gateway
Once the installation is successful, you need to configure the gateway so that it
can be used with Power BI. For configuring the gateway, you need to continue
with the steps followed in the earlier section, “Downloading and Installing the
On-premises Data Gateway.” Perform the following steps to configure/register
gateway:
1. Enter the email address with which you want to register your gateway in the
Email address to use with this gateway text box of the On-premises data
gateway window.
2. Click the Sign in button, as shown in Figure 4.69.

Figure 4.69:  Specifying the email address

The Sign in window appears.

 Data Refresh in Power BI   195

3. Enter the related password in the Password text box.

4. Click the Sign in button.

The next page of the On-premises data gateway window appears.

5. Select the Register a new gateway on this computer radio button to regis-
ter a new gateway.
6. Click the Next button, as shown in Figure 4.70.

Figure 4.70:  Specifying the type of gateway registration

The next page of the On-premises data gateway window asks you to specify a
name and recovery key for the gateway.
7. Enter the name of a gateway in the New on-premises data gateway name
text box.
8. Enter the desired recovery key for the gateway in the Recovery key text box.
9. Enter the same recovery key in the Confirm recovery key text box.
10. Click the Configure button, as shown in Figure 4.71.
196   Chapter 4: Power BI on Open Source Stack

Figure 4.71:  Configuring on-premises data gateway

Once the gateway is configured, you will see the following status message: “The
gateway DemoGateway is online and ready to be used.”
11. Click the Close button to close the On-premises data gateway window, as
shown in Figure 4.72.
 Data Refresh in Power BI   197

Figure 4.72:  Completion status of gateway configuration

Adding Data Source

After installing the on-premises data gateway, you can add a data source (Post-
greSQL Server) to be used with the gateway. You can find the list of available
gateways under the GATEWAY CLUSTERS section of the Gateways window. The
settings related to the selected gateway cluster appear in the right pane of the
Gateways window.

Perform the following steps to add a data source to the gateway created earlier:
1. Launch Power BI Service.
2. Click the Settings icon. A list of options appears.
3. Click the Manage gateways option, as shown in Figure 4.73.
198   Chapter 4: Power BI on Open Source Stack

Figure 4.73:  Clicking the Manage gateways option

The Gateways window appears. In the left pane, you will see a list of available
gateways under the GATEWAY CLUSTERS section. The right pane displays infor-
mation about the selected gateway and other settings related to the gateway
under the Gateway Cluster Settings tab, as shown in Figure 4.74.

Figure 4.74:  Gateway Cluster Settings

 Data Refresh in Power BI   199

4. Click either Add data sources to use this gateway link or select the Ellipsis
icon (…) next to the gateway and click the ADD DATA SOURCE option from
the menu, as shown in Figure 4.75.

Figure 4.75:  Clicking the ADD DATA SOURCE option

The Data Source Settings pane appears.

5. Enter the desired name for the data source in the Data Source Name text
box.
6. Select the PostgreSQL option from the Data Source Type drop-down list to
connect the created gateway to the PostgreSQL data source.
7. Enter the name of PostgreSQL server in the Server text box.
8. Enter the same name of the database that you used earlier, in the Database
text box, as shown in Figure 4.76.

Figure 4.76:  Specifying data source settings

200   Chapter 4: Power BI on Open Source Stack

9. Enter the desired username in the Username text box.

10. Enter the desired password in the Password text box.
11. Expand the Advanced settings option. The related settings appear.
12. Select the desired privacy level setting from the Privacy Level setting for
this data source drop-down list.
13. Click the Add button, as shown in Figure 4.77.

Figure 4.77:  Specifying username and password

After clicking the Add button, the Connection Successful message appears,
which states that the connection has been established, as shown in Figure 4.78.

Figure 4.78:  Connection successful

14. Select the Users tab to add users to the created data source.
15. Specify the email address of the person that you want to allow to publish
reports using this data source.
 Data Refresh in Power BI   201

16. Click the Add button. The specified person is added to the list box, as shown
in Figure 4.79.

Figure 4.79:  Adding users

Configuring Scheduled Refresh

As discussed earlier, you can configure a scheduled refresh for a dataset only
after completing the setup of the data gateway.

Perform the following steps to configure a scheduled refresh for a dataset:

1. Launch Power BI Service.
2. Select the My Workspace option from the left pane.
3. Select the Datasets tab in the right pane. A list of available datasets appears.
4. Click the Schedule refresh icon beside the desired dataset, as shown in
Figure 4.80.
202   Chapter 4: Power BI on Open Source Stack

Figure 4.80:  Clicking the Schedule refresh icon

The Settings page for the selected dataset appears.

5. Expand the Gateway connection node to expand the settings related to the
gateway connection. The related settings appear.
6. Select the Use an on-prem data gateway radio button. You will see the
status as online.
7. Click the Apply button to apply the changes, as shown in Figure 4.81.

Figure 4.81:  Setting Gateway connection

 Data Refresh in Power BI   203

8. Expand the Scheduled refresh node and specify settings related to schedule
refresh, including the frequency and time slots to refresh the dataset.
9. Drag the slider under the Keep your data up to date section to change its
status to On.
10. Select the desired frequency for a refresh from the Refresh frequency drop-
down list.
11. Select the desired time zone from the Time zone drop-down list.
12. Click the Send refresh failure notification email to me checkbox to apply
a setting such that you receive an email if the refresh fails.
13. Click the Apply button, as shown in Figure 4.82.

Figure 4.82:  Configuring scheduled refresh

After clicking the Apply button, the scheduled refresh is configured.

204   Chapter 4: Power BI on Open Source Stack

Creating Content Packs

A content pack is a complete package of your dashboard, report, and dataset that
can be shared with other users in your organization. You can create the content
pack and publish it to the team. As you publish the content pack, it becomes
available in a centralized repository called AppSource. This repository helps
team members to easily locate reports and datasets published for them.
You can locate the content packs in a central repository only when you are a
member of a particular group, such as the entire organization, distribution group,
security group, or Office 365 group, to which the content pack is published.

Note
You will need a Power BI Pro account for creating and accessing an organizational content pack.

Perform the following steps to create and publish a content pack:

1. Launch Power BI Service.
2. Click the Settings icon. A drop-down menu appears.
3. Click the Create content pack button in the drop-down menu, as shown in
Figure 4.83.
 Creating Content Packs   205

Figure 4.83:  Creating a content pack

The Create content pack page appears.

4. Select either the Specific groups radio button to allow a specific group to
access this content pack, or select the My entire organization radio button
to allow the entire organization to access this content pack.
5. Enter the desired title for the content pack in the Title text box.
6. Enter the desired description for the content pack in the Description text
box.
7. Click the Upload icon to upload an image for the content pack, as shown in
Figure 4.84.
206   Chapter 4: Power BI on Open Source Stack

Figure 4.84:  Clicking the Upload link

The Open dialog box appears.

8. Navigate to the location where the image is located.
9. Select the image.
10. Click the Open button to upload the image, as shown in Figure 4.85.
 Creating Content Packs   207

Figure 4.85:  Uploading an image

The selected image is uploaded.

11. Select the desired report to be published from the Reports list box. The
related dataset is selected automatically under the Datasets list box.
12. Click the Publish button, as shown in Figure 4.86.
208   Chapter 4: Power BI on Open Source Stack

Figure 4.86:  Publishing a content pack

A pop-up appears stating that the content pack has been published successfully
and added to the organizations content gallery.

You can view the content pack by performing the following steps:
1. Click the Settings icon. A drop-down menu appears.
2. Select the View content pack option from the drop-down menu, as shown
in Figure 4.87.
 Creating Content Packs   209

Figure 4.87:  Selecting the View content pack option

The View content pack page appears listing the content packs, as shown in
Figure 4.88.

Figure 4.88:  Viewing content pack

210   Chapter 4: Power BI on Open Source Stack

Summary

This chapter outlined the process for integrating PostgreSQL with Power BI. It
provided in-depth information about creating a report in Power BI that takes data
from the database located in PostgreSQL. We outlined the step-by-step process
to take data from the data source, create reports, and then publish the report to
Power BI Service. This chapter also reviewed data refresh wherein we discussed
gateway setup and configuration of a scheduled refresh. And last, we outlined the
process for creating and viewing content packs.
C
 hapter 5
Power BI on ERP Applications
As discussed earlier, Power BI can be integrated with a number of data sources.
One of the most prominent features of Power BI is its ability to integrate with
Dynamics CRM, which is a customer relationship management (CRM) solution
developed by Microsoft. The ability of Microsoft Dynamics CRM to enhance cus-
tomer relationships for any organization make it a perfect choice for entrepre-
neurs as compared to other sources. You can easily integrate Power BI with Mic-
rosoft Dynamics CRM through the simple user interface. Users can create simple
and intuitive reports in Power BI based on data from Microsoft Dynamics CRM.
This chapter provides an in-depth review of Power BI integration with Microsoft
Dynamics CRM.

Defining CRM

CRM manages interactions between a company and its customers. It belongs to the
data-driven solution category and enhances the interaction and business-driven
capabilities of companies with their customers. CRM works as an integrated
system for managing customer relationships, tracking sales, and producing data.

Functions of a CRM Solution

The most important functions of a CRM solution are listed below:

–– It simplifies processes and enhances profitability in different divisions
including sales, marketing, and service divisions.
–– It provides a multidimensional platform that stores everything related to the
development and enhancement of customer relationships.
–– It helps in the growth of opportunities and revenue by building business rela-
tionships.
–– It centralizes all customer information.
–– It automates marketing connections.
–– It stipulates business intelligence.
–– It helps in tracking sales opportunities.
–– It empowers responsive customer service.

DOI 10.1515/9781547400720-005
212   Chapter 5: Power BI on ERP Applications

Microsoft Dynamics CRM

To compete with other CRM solutions developed by different vendors, Microsoft

introduced its own CRM software and named it Microsoft Dynamics CRM. The
defining goal and functionality of Microsoft Dynamics CRM is to improve cus-
tomer relationships for all types of organizations. It primarily focuses on different
divisions/sectors including Sales, Marketing, and Customer Service. Microsoft
Dynamics CRM is based on the extended relationship management (xRM) plat-
form, which allows partners to customize it through the .NET based framework.
Microsoft Dynamics CRM provides complete support such that CRM apps can be
used on mobiles and tablets.

Benefits of Microsoft Dynamics CRM

Although there are several CRM solutions available in the market, Microsoft
Dynamics CRM takes precedence over other solutions due to its unique features
such as support of deployment models, easy integration with other stacks pro-
vided by Microsoft, etc. Some unique features and benefits of Microsoft Dynamics
CRM over its competitors are as follows:
–– It is easy to use due to its simple user interface (UI).
–– It provides different deployment models including on-premises, part-
ner-hosted, hybrid, and online depending upon business structure and
needs.
–– It supports “point and click” configuration, which eliminates the need to
open Microsoft Visual Studio separately to customize the CRM deployment.
–– Different licensing options are available per business requirements.
–– It supports reporting features that stipulate valuable data insights. It also
allows organizations to use SQL Server Reporting Services (SSRS) to create
reports.
–– It provides the duplicate detection feature and makes the process of import-
ing data from different data sources easy.
–– It supports several languages and currencies.
–– It is a valuable product that balances both price and features.
–– It integrates with commonly used applications including Microsoft Office and
the Microsoft Server stack.
–– It works on the xRM framework, which makes it a versatile platform for creat-
ing custom line-of-business (LOB) applications.
 Sign Up for Microsoft Dynamics CRM Online   213

Sign Up for Microsoft Dynamics CRM Online

Microsoft allows organizations to use Microsoft Dynamics CRM solution on a trial

basis, and then requires use of paid services as per business requirements.

Perform the following steps to sign up for a trial:

1. Visit the following link:
https://signup.microsoft.com/Signup?OfferId=bd569279-37f5-4f5c-99d0-
425873bb9a4b&dl=DYN365_ENTERPRISE_PLAN1&Culture=en-us&Country=
us&flight=AdminOnCustomization&ali=1

The Dynamics 365 wizard appears with the Welcome, let’s get to know you
dialog box.
2. Select the desired country from the Country drop-down list, as shown in
Figure 5.1.

Figure 5.1:  Selecting the country

3. Enter your first name in the First name text box.

4. Enter your last name in the Last name text box.
5. Enter your email address in the Business email address text box.
6. Enter your phone number in the Business phone number text box.
7. Enter your company name in the Company name text box.
214   Chapter 5: Power BI on ERP Applications

8. Select the desired language from the Language drop-down list.

9. Select the size of the organization from the Your organization size drop-
down list.
10. Click the Next button.

The Create your user ID dialog box appears, as shown in Figure 5.2.

Figure 5.2:  The Create your user ID dialog box

11. Enter the desired username in the Username text box.

12. Enter the relevant company name in the Yourcompany text box.
13. Enter the desired password in the Create password text box.
14. Enter the same password in the Confirm password text box.
15. Click the Create my account button to create the account.

The Prove. You’re. Not. A. Robot. dialog box appears.

16. Select the Text me radio button to get the verification code in text form.
17. Enter a valid phone number in the Phone number text box.
18. Click the Text me button, as shown in Figure 5.3.
 Sign Up for Microsoft Dynamics CRM Online   215

Figure 5.3:  Specifying the phone number

The Prove. You’re. Not. A. Robot. dialog box is redirected.

19. Enter the verification code (as received in the text message sent to the phone
number provided above) in the Enter your verification code text box.
20. Click the Next button, as shown in Figure 5.4. 

Figure 5.4:  Entering verification code

The Save this info. You’ll need it later dialog box appears.
21. Click the Set up button, as shown in Figure 5.5.
216   Chapter 5: Power BI on ERP Applications

Figure 5.5:  Clicking the Set up button

The Let’s get your FREE 30-day trial set up dialog box appears.
22. Select the None of these. Don’t customize my organization checkbox.
23. Click the Complete Setup button, as shown in Figure 5.6.

Figure 5.6:  The Let’s get your FREE 30-day trial set up dialog box

After clicking the Complete Setup button, you are redirected to your new CRM
Online trial, which has a sample dataset already installed. You can access dif-
 Creating Sample Data for Dynamics CRM   217

ferent sections of CRM by using the navigation options at the top, as shown in
Figure 5.7.

Figure 5.7:  Dynamics 365 Home page

Creating Sample Data for Dynamics CRM

In Microsoft Dynamics CRM Online, sample data is already installed. However,

in the on-premises version, data is not installed by default. With the on-premises
version you need to install the sample data to start working with it.

Perform the following steps to install sample data:

1. Navigate to your CRM tenant.
2. Select the desired category.
3. Click the Settings button.
4. Click the Data Management option, as shown in Figure 5.8.
218   Chapter 5: Power BI on ERP Applications

Figure 5.8:  Clicking the Data Management option

The Data Management page appears.

5. Select the Sample data link, as shown in Figure 5.9.

Figure 5.9:  Selecting the Sample data link

Sample tables are created in CRM, as shown in Figure 5.10.

 Getting Data into Power BI   219

Figure 5.10:  Displaying sample data

Getting Data into Power BI

The primary task in the process of creating a report in Power BI is retrieving data
from the respective data source, that is, Dynamics CRM in this case.

Perform the following steps to import data into Power BI:

1. Open Power BI desktop.
2. Log in with an organizational account.
3. Click the Get Data button under the External data section of the Home tab,
as shown in Figure 5.11.

Figure 5.11:  Clicking the Get Data button

The Get Data dialog box appears.

4. Select the All option from the left pane.
5. Select the Dynamics 365 (online) option from the right pane.
6. Click the Connect button, as shown in Figure 5.12.
220   Chapter 5: Power BI on ERP Applications

Figure 5.12:  The Get Data dialog box

The Dynamics 365 (online) dialog box appears.

7. Select the Basic radio button.
8. Enter the URL of Dynamics CRM in the Web API URL text box.
9. Click the OK button to connect with Dynamics CRM, as shown in Figure 5.13.

Figure 5.13:  The Dynamics 365 (online) dialog box

The Navigator window appears, which provides a list of tables that can be loaded
to Power BI Desktop.
10. Select the desired tables from the Navigator window.
11. Click the Load button to load the tables into Power BI Desktop, as shown in
Figure 5.14.
 Getting Data into Power BI   221

Figure 5.14:  The Navigator window

The selected tables are imported into Power BI Desktop and the name of the
imported tables display under the FIELDS pane, as shown in Figure 5.15.

Figure 5.15:  The FIELDS pane

Some of the default tables are listed as follows:

–– Accounts
–– Audits
–– Contacts
–– Opportunities
–– Lead source
–– Leads
222   Chapter 5: Power BI on ERP Applications

–– System users
–– Ratings
–– Teams

You may also need to add additional tables to perform specific tasks or create
specific reports.

Creating Reports

As discussed earlier, a report is a collection of visuals. In this chapter, we have

created a .pbix file that contains the following four reports:
–– Leads Revenue by Employee
–– Leads Revenue by Company
–– Loans by Category
–– Loans Summary

Leads Revenue by Employee

The Leads Revenue by Employee report shows the leads revenue generated by
employee. We have used different filters and slicers in this report, as shown in
Figure 5.16.

Figure 5.16:  The Leads Revenue by Employee report

 Creating Reports   223

The primary visuals used in the report above are listed as follows:
–– Chiclet slicers
–– Pie chart
–– Clustered bar chart
–– Slicer
–– Table
–– Map

Chiclet Slicers
Similar to other slicers, a chiclet slicer is used to apply filters on data. In the above
report, we have created five chiclet slicers, as shown in Figure 5.17.

Figure 5.17:  Chiclet slicers

The mapping details of the DAY chiclet slicer are as follows:

DAY =

if(FORMAT(leads[createdon], "MM-DD-YYYY") = FORMAT(TODAY(), "MM-DD-YYYY"),

"Today",

if(FORMAT(leads[createdon], "MM-DD-YYYY") = FORMAT(TODAY()+1, "MM-DD-YYYY"),

"Tomorrow",
224   Chapter 5: Power BI on ERP Applications

if(FORMAT(leads[createdon], "MM-dd-YYYY") = FORMAT(TODAY()-1, "MM-dd-YYYY"),

"Yesterday", BLANK())))

The mapping details of the WEEK chiclet slicer are as follows:

WEEK =

if(leads[WeekNo]=WEEKNUM(TODAY(),21) && YEAR(leads[createdon])=YEAR(TODAY()),"This

Week",

if((WEEKNUM(TODAY(),21)-1) = 0 && leads[WeekNo]=53 && YEAR(leads[createdon])=YEAR(

TODAY())-1,"Last Week",

if(leads[WeekNo]=WEEKNUM(TODAY(),21)-1 &&
YEAR(leads[createdon])=YEAR(TODAY()),"Last Week",

if(leads[WeekNo]=WEEKNUM(TODAY(),21)+1 &&
YEAR(leads[createdon])=YEAR(TODAY()),"Next Week",

if((WEEKNUM(TODAY())+1) = 54 && leads[WeekNo]=1 &&

YEAR(leads[createdon])=YEAR(TODAY())+1,"Next Week",

BLANK())))))

The mapping details of the MONTH chiclet slicer are as follows:

Month Duration =

if(FORMAT(leads[createdon], "MM-YYYY") = FORMAT(TODAY(), "MM-YYYY"), "This Month",

if(FORMAT(leads[createdon], "MM-YYYY") = FORMAT(EOMONTH(TODAY(), -1), "MM-YYYY"),

"Last Month",

if(FORMAT(leads[createdon], "MM-YYYY") = FORMAT(EOMONTH(TODAY(), 1), "MM-YYYY"),

"Next Month", BLANK())))

The mapping details of the QUARTER chiclet slicer are as follows:

QUARTER = if(leads[QuarterNo]=ROUNDUP(MONTH(TODAY())/3,0) &&

YEAR(TODAY())=leads[Year],"This Quarter",

if(leads[QuarterNo]=(ROUNDUP(MONTH(TODAY())/3,0)-1) &&
YEAR(TODAY())=leads[Year],"Last Quarter",

if(leads[QuarterNo]=4 && (ROUNDUP(MONTH(TODAY())/3,0)-1)=0 && YEAR(TODAY())-

1=leads[Year],"Last Quarter",

if(leads[QuarterNo]=(ROUNDUP(MONTH(TODAY())/3,0)+1) &&
YEAR(TODAY())=leads[Year],"Next Quarter",
 Creating Reports   225

if(leads[QuarterNo]=1 && (ROUNDUP(MONTH(TODAY())/3,0)+1)=5 &&

YEAR(TODAY())+1=leads[Year],"Next Quarter",

BLANK())))))

The mapping details of the YEAR chiclet slicer are as follows:

YearDuration =

if(YEAR(leads[createdon]) = YEAR(TODAY()), "Current Year",

if(YEAR(leads[createdon]) = CALCULATE(YEAR(TODAY())-1), "Prior Year",

if(YEAR(leads[createdon]) = CALCULATE(YEAR(TODAY())+1),"Next Year", BLANK())))

Pie Chart Visual

A pie chart visual is a circle divided into slices and displays data in numerical pro-
portions. This pie chart visual shows the Revenue by Employee data, as shown
in Figure 5.18.

Figure 5.18: The Revenue by Employee pie chart

226   Chapter 5: Power BI on ERP Applications

Clustered Bar Chart

A clustered bar chart is a simple bar chart where different graph bars are placed
next to each other. The REVENUE BY CITY chart displays revenue data filtered by
city, as shown in Figure 5.19.

Figure 5.19:  The REVENUE BY CITY clustered bar chart

Slicer
A Slicer visual acts as a filter that is applied on other report visuals to provide
filtered results. The REVENUE OFFICER slicer lists the name of revenue officers,
and filters other visuals based on the selected officer in the “Leads Revenue by
Employee” report, as shown in Figure 5.20.

Figure 5.20:  The REVENUE OFFICER Slicer visual

 Creating Reports   227

Map
The Map visual highlights specific or important locations on a map. In this report,
this visual highlights the countries, as shown in Figure 5.21.

Figure 5.21:  The Map visual

Table
The Table visual contains rows and columns. In this report, the Table visual dis-
plays information including Employee Name, Designation, City, Country, Total
Revenue, and Email, as shown in Figure 5.22.

Figure 5.22:  The Table visual

228   Chapter 5: Power BI on ERP Applications

Leads Revenue by Company

The “Leads Revenue by Company” report displays the leads revenue filtered
through companies. This report contains chiclet slicers, a stacked area chart, a
pie chart, the slicer filter, and a table, as shown in Figure 5.23.

Figure 5.23:  The Leads Revenue by Company report

The Leads Revenue by Company report contains the following visuals:

–– Chiclet slicers
–– Stacked area chart
–– Pie chart
–– Slicer visual
–– Table

Stacked Area Chart

A stacked area chart is similar to an area chart that displays the values of numer-
ous groups on the same visual. The “Leads Revenue by Company” report contains
the “Revenue by Company” stacked area chart, as shown in Figure 5.24.
 Creating Reports   229

Figure 5.24:  Stacked area chart

Slicer
A Slicer visual acts as a filter that is applied on other report visuals to provide fil-
tered results. The COMPANIES slicer lists the name of companies and thus filters
the revenue status of each company in the “Leads Revenue by Company” report,
as shown in Figure 5.25.
230   Chapter 5: Power BI on ERP Applications

Figure 5.25:  The COMPANIES slicer

Loans by Category

The “Loans by Category” report displays data related to loans filtered by product
category. This report also contains filters and slicers, as shown in Figure 5.26.

Figure 5.26:  The Loans by Category report

 Creating Reports   231

The “Loans by Category” report contains the following visuals:

–– Chiclet slicers
–– Pie chart
–– Clustered column chart
–– Table

Clustered Column Chart

A clustered column chart is a column chart that compares values across defined
categories through vertical bars. The “Loan by Stages” clustered column chart
displays loan values per Step Name category, as shown in Figure 5.27.

Figure 5.27:  Clustered column chart

Loans Summary

The “Loans Summary” report displays a summary of total loans. This report con-
tains chiclet slicers, a donut chart, a card grid, PBI_CV, and a table visual, as
shown in Figure 5.28.
232   Chapter 5: Power BI on ERP Applications

Figure 5.28:  The Loans Summary report

Donut Chart
Donut (or doughnut) chart is similar to a pie chart that contains slices wherein
each section depicts a value. The “Total Loan by Stepname” donut chart is shown
in Figure 5.29.

Figure 5.29:  The “Total Loan by Stepname” donut chart

 Deep Linking in Power BI   233

Deep Linking in Power BI

Deep linking allows users to view information available from the Dynamics CRM
portal by clicking the available link. This link redirects the user to the linked
URL. Figure 5.30 shows the deep linking feature applied on the values under the
Company URL column.

Figure 5.30:  Using the deep linking feature

Adding a New User

You can add a new user in Microsoft Dynamics CRM Online trial. Perform the
following steps to add a new user:
1. Navigate to the Dynamics 365 admin portal.
2. Click the Add a user link under the Active users section, as shown in Figure 5.31.

Figure 5.31:  Adding a new user

234   Chapter 5: Power BI on ERP Applications

The New user window appears, as shown in Figure 5.32.

Figure 5.32:  The New user window

3. Enter the desired first name in the First name text box.
4. Enter the desired last name in the Last name text box.
5. Enter the display name in the Display name text box.
6. Enter the desired user name in the Username text box.
7. Select the desired location from the Location drop-down list.
8. Expand the Roles section. Different options related to the Roles section
appear.
9. Select the desired radio button under the Roles section to assign a role to the
user, as shown in Figure 5.33.
 Adding a New User    235

Figure 5.33:  Assigning a role

10. Expand the Product licenses section.

11. Assign the desired licenses to the new user.
12. Click the Add button, as shown in Figure 5.34.
236   Chapter 5: Power BI on ERP Applications

Figure 5.34:  Adding a new user

A confirmation window appears with the status “User was added,” as shown in
Figure 5.35.
 Row-Level Security in Power BI   237

Figure 5.35:  Displaying a confirmation window

Row-Level Security in Power BI

Row-level security (RLS) is a feature of Power BI that filters content based on a

user’s role. Simply speaking, RLS is used to impose data access restrictions for
available users. You can apply filters on data at the row level. These filters can be
specified under available roles.

Several considerations related to RLS are as follows:

–– RLS can be organized for data models that are brought into Power BI through
Power BI Desktop.
–– RLS can be defined on datasets that are created through the DirectQuery
option in data sources including SQL Server.

You can create roles and rules in Power BI Desktop. These roles definitions are
automatically published to Power BI Service when you publish your report from
Power BI Desktop to Power BI Service. You can apply filters to these roles through
DAX expressions.
238   Chapter 5: Power BI on ERP Applications

Defining Roles and Rules

As discussed earlier, the roles and rules defined in Power BI Desktop are auto-
matically published to Power BI Service when you publish your report to Power
BI Service.

Perform the following steps to define security roles in Power BI Desktop:

1. Import data into Power BI Desktop using the Get data option.
2. Select the Modeling tab.
3. Click the  Manage Roles button under the Security section, as shown in
Figure 5.36.

Figure 5.36:  Clicking the Manage Roles button

The Manage roles dialog box appears.

4. Click the Create button under the Roles section to create a new role, as
shown in Figure 5.37.

Figure 5.37:  The Manage roles dialog box

A text box appears with the text “New role.”

 Row-Level Security in Power BI   239

5. Replace the text with the desired name of the role. In our case, we have
replaced the text with “Manager.” Similarly, we have created one more role
with the name “Officer.”
6. Select the desired table from the Tables section for which you want to apply
a DAX rule.
7. Enter the desired DAX rule for the selected table in the Table filter DAX
expression text area. In our case, we have three tables, namely “leads,”
“opportunities,” and “systemusers.” From these tables, we have used the
“leads” and “opportunities” tables. We have written the following DAX rules
for these tables:

For “leads” table:

[address1_country]=LOOKUPVALUE(systemusers[address1_
country],systemusers[internalemailaddress],UserName())

For “opportunities” table:

[Country]=LOOKUPVALUE(systemusers[address1_
country],systemusers[internalemailaddress],UserName())

Note
Data Analysis Expressions (DAX) is an expression (a set of functions, constants, and operators)
written to apply calculations on data available in your model. The DAX expression should either
return a True or False.

8. Click the OK icon ( ) next to the Table filter DAX expression option to
validate the expression, as shown in Figure 5.38.

Figure 5.38:  Applying and validating DAX rule

9. Click the Save button to save the created roles.

240   Chapter 5: Power BI on ERP Applications

Note
In the default configuration, RLS filtering uses single-directional filters irrespective of the di-
rection set for the relationships. However, you can enable bi-directional filtering by selecting
the bi-directional option and selecting the Apply security filter in both directions checkbox. You
should select the Apply security filter in both directions  checkbox at the time of implement-
ing dynamic RLS. In dynamic RLS, RLS is implemented based on user name or login ID.

Validating the Role within Power BI Desktop

After creating the role in Power BI Desktop, the results of the created role can be
validated within Power BI Desktop.

Perform the following steps to validate the role within Power BI Desktop:
1. Click the View as Roles button under the Security group of the Modeling
tab, as shown in Figure 5.39.

Figure 5.39:  Clicking the View as Roles button

The View as roles dialog box opens.

2. Select the role to be used as a filter. In our case, we have selected Officer.
3. Click the OK button, as shown in Figure 5.40.
 Row-Level Security in Power BI   241

Figure 5.40:  The View as roles dialog box

After clicking the OK  button, the visuals in the report are filtered as per the
selected role, as shown in Figure 5.41.

Figure 5.41:  Validating the role

242   Chapter 5: Power BI on ERP Applications

Deploying the Report

Once the required roles are created in Power BI Desktop, you can deploy the
report containing roles to Power BI Service.

Perform the following steps to deploy the report to Power BI Service:

1. Click the Publish button under the Share section of the Home tab, as shown
in Figure 5.42.

Figure 5.42:  Clicking the Publish button

The selected report is deployed to Power BI Service successfully, as shown in

Figure 5.43.

Figure 5.43:  Deploying the report

Managing Security

After creating a role in Power BI Desktop and publishing the report to Power BI
Service, you can manage RLS on your data model or dataset.
 Row-Level Security in Power BI   243

Perform the following steps to manage RLS:

1. Navigate to Power BI Service.
2. Expand the My Workspace section.
3. Select the Ellipsis icon (…) next to the name of the applicable dataset under
the DATASETS section. A menu appears.
4. Select the SECURITY option from the menu, as shown in Figure 5.44.

Figure 5.44:  Selecting the SECURITY option

Selecting the SECURITY option opens the RLS page wherein the left pane displays
the name of the roles created in Power BI Desktop, while the right pane allows
you to add members to a role selected in the left pane, as shown in Figure 5.45.
244   Chapter 5: Power BI on ERP Applications

Figure 5.45:  The Row-Level Security page

Note
The Security option is available for dataset owners only. In a case where the dataset relates to a
group, the Security option is available for group administrators.

Working with Members

After creating a role in Power BI, you need to add members to the specified role
to allow them to see the filtered results specified in RLS. This section covers the
following topics:
–– Adding a member
–– Removing a member

Note
Roles are created or modified in Power BI Desktop, while members within the roles are added in
Power BI Service.

Adding a Member
Perform the following steps to add a member:
1. Open Power BI Service.
2. Navigate to the dataset that you have published by applying RLS.
3. Click the Ellipsis icon (…) next to the name of the dataset. A menu appears.
 Row-Level Security in Power BI   245

4. Select the Security option from the menu. The Row-Level Security page
appears.
5. Select the desired role to which you want to add the member.
6. Enter the email address or name of the user that you want to add to the role.

Note
The member that you are adding to the role should belong to your organization. Groups that are
created within Power BI can not be added as a member.

7. Click the Add button, as shown in Figure 5.46.

Figure 5.46:  Adding a member

8. Click the Save button to save the configuration.

Note
The value specified in the parentheses beside the role name represents the number of members
belonging to the role.

Removing a Member
Perform the following steps to remove a member:
1. Navigate to the Row-Level Security page.
2. Select the desired role from which you want to remove a member.
3. Click the Close icon (X) next to the name of the member to remove the
selected member, as shown in Figure 5.47.
246   Chapter 5: Power BI on ERP Applications

Figure 5.47:  Removing a member

4. Click the Save button to save the configuration.

Validating the Role within Power BI Service

Similar to the context of validating the role in Power BI Desktop, you can validate
the working of the defined role in Power BI Service.

Perform the following steps to validate the roles within Power BI Service:
1. Expand the My Workspace option.
2. Click the Ellipsis icon (…) next to the report name you want to validate. A
menu appears.
3. Select the Test data as role option. The report is filtered based on the selected
role, as shown in Figure 5.48.
 Sharing the Report   247

Figure 5.48:  Validating the role

You can also filter the report based on other roles by selecting the other role from
the Now viewing as drop-down list.

Sharing the Report

Once you are done with all your work on the report, you can easily share it with
your colleagues.

Perform the following steps to share the report:

1. Open the report you want to share in Power BI Service.
2. Click the Share button to share the report, as shown in Figure 5.49.
248   Chapter 5: Power BI on ERP Applications

Figure 5.49:  Clicking the Share button

The Share report dialog box appears.

3. Select the Share tab.
4. Enter the email address of the recipient with which you want to share the
report in the Grant access to text box.
5. Enter a message in the Include an optional message text area.
6. Select the Allow recipients to share your report checkbox.
7. Select the Send email notification to recipients checkbox.
8. Click the Share button to share the report link, as shown in Figure 5.50.

Figure 5.50:  Sharing a report

 Summary   249

The specified recipient will receive an email message that contains a link to the
report, and can open this report by clicking the received link.

Summary

Microsoft Dynamics CRM is a customer relationship management solution based

on the xRM platform. There are several benefits of Microsoft Dynamics CRM as
compared to other CRM solutions. Some of its key benefits are that it has a very
simple and easy to use UI; it has multiple licensing options; it supports report-
ing features and several languages and currencies. This chapter first outlined the
process to sign up for a Microsoft Dynamics CRM Online. Next, it described the
complete process of taking data from Dynamics CRM and importing it into Power
BI. We created four reports wherein each report contained multiple visuals. New
chiclet slicers were also defined in this chapter. Next, we described the deep
linking feature that allows users to view the information available on the Dynam-
ics CRM portal by clicking the available link. And last, we summarized the RLS
feature within Power BI, which filters content based on a user’s role.
Chapter 6
Conclusion
Power BI is a business intelligence and reporting tool that allows users to create
intuitive reports. A growing number of organizations are using Power BI as their
business analytics solution. According to Gartner’s report, by 2020, the compa-
nies that are investing in analytics will see their value enhanced compared to
those that are not. This chapter provides a summary of all the chapters covered
in this book.

Introducing Data Visualization

Data visualization is the concept of presenting data through visuals, such as info-
graphics, charts, Sparkline, and geographic maps, etc. Data visualization pro-
vides an efficient and effective way to communicate concepts in general because
the human brain processes visualized information more easily than textual infor-
mation. A few of the most commonly used data visualization tools are Microsoft
Power BI, Tableau, and Qlik.
Introduced by Microsoft, Power BI is a business analytics reporting tool used
to create interactive business reports. It incorporates several analytics features to
provide business insights across an entire organization.
The top two competitors in the list of the business intelligence (BI) and data
visualization tools are Power BI and Tableau. These tools are easy to use and
support a large collection of visuals. These tools can be differentiated based on
several parameters, including infrastructure support, dashboards, data sources,
visualizations, customer/technical support, and pricing.
Some of the key features of Power BI include free sign-up, the ability to
import or view data from multiple data sources, the ability to obtain key metrics
of business, Quick insights, and data-driven decision making from anywhere. In
addition to the key features, it also supports several advanced features including
the ability to embed Power BI reports and dashboards into a Web App, real-time
streaming, support for natural language query, share content pack, and integra-
tion with Cortana.
There are two variants of Power BI including Power BI Desktop and Power BI
Service. Power BI Desktop is an on-premises version of Power BI, which allows
users to build reports, queries, and data connections. Power BI Desktop can be
installed on a local machine. You can connect to any data source and import the
required tables from the selected data source to Power BI Desktop. After importing

DOI 10.1515/9781547400720-006
252   Chapter 6: Conclusion

data into Power BI, you can create visuals based on that data. Once the required
visuals are added to the report, you can then save your report.
Power BI Service/Power BI Online is a business intelligence service that hosts
reports in the cloud (Microsoft Azure). The major difference between Power BI
Desktop and Power BI Service is that the former focuses on creating data while
the latter focuses on sharing data.
The major building blocks of Power BI Service are dashboards, reports, work-
books, and datasets.
A dashboard is a collection of tiles that can contain no tiles to many tiles.
A Power BI report is a collection of visualizations/visuals, such as charts and
graphs. A dataset is defined as a set of data that we import or connect to in Power
BI. A special type of dataset that can be imported or connected to Power BI is a
workbook.
Reports created in Power BI Desktop can be published to Power BI Service
where it can be accessed by other users in your organization.

Power BI Azure Application

Power BI can be integrated with Azure services to generate real-time insights into
your business. Azure APIs can be used to view the real-time business data in an
easy to understand and highly visualized manner. A Web app created on Azure
can be embedded with Power BI to visualize the report created in Power BI. The
real-time streaming feature of Power BI allows business analysts to collect real-
time information from different sources that provide time-sensitive data. For visu-
alizing real-time data, you are required to set up the real-time streaming dataset
in Power BI. Power BI supports three datasets including Push dataset, Streaming
dataset, and PubNub streaming dataset. You can push data into a dataset using
Power BI REST APIs, streaming dataset UI, and Azure Stream Analytics.
The Quick Insights feature of Power BI applies complex algorithms to the
dataset and locates different subsets of the dataset quickly within the specified
time frame.

Power BI on Microsoft Stack

Power BI can be integrated with a large number of data sources including Excel,
SQL Server, PostgreSQL, Dynamics CRM, MySQL, etc. One data source provided
by Microsoft is Microsoft SQL Server. Microsoft provides a large list of features
with this integrated solution because both are products of Microsoft. You can use
 Power BI on Open Source Stack   253

both the Import and the DirectQuery options to import data into Power BI from
SQL Server. Once you import data into Power BI, you can establish a relationship
between tables.
You can also use Data Analysis Expressions (DAX) expressions to create calcu-
lated columns and tables. DAX is an expression (a set of functions, constants, and
operators) written to apply calculations on data available in your model. Once the
calculated tables and columns are ready, you can use the data to create visuals
for the report. You can easily publish this report to Power BI Service. To access
the report from anywhere, you can set up a gateway on the machine running SQL
Server. A gateway is like a bridge that establishes a connection between Power BI
and SQL Server. It is a piece of software that allows users to access data located
on an on-premises system or network so that it can be used in a cloud service
later. You can configure the data gateway for Power BI and add a data source to
it. You can also use the data refresh feature in Power BI. You can set a scheduled
refresh of data so that your Power BI report visualizes updated information. For
successful configuration of a scheduled refresh, you need to set up the gateway
connection, data source credentials, and schedule refresh.
A content pack is a complete package of your dashboard, report, and dataset
that can be shared with other users in your organization. You can create the
content pack and publish it to the team. You should have a Power BI Pro account
for creating and accessing an organizational content pack.
Power BI can also be integrated with one of the most advanced features of
Windows 10, that is, Cortana Intelligence Suite. When you integrate Cortana with
Power BI, Cortana also looks into Power BI dashboards and reports for related
keywords each time you make a query to Cortana.

Power BI on Open Source Stack

PostgreSQL is an open source object-relational database management system

(ORDBMS). Power BI can be integrated with PostgreSQL and thus you can create
intuitive reports. To integrate PostgreSQL with Power BI, you should have Post-
greSQL, PostgreSQL database, Npgsql connector, and Power BI. Npgsql connec-
tor is an open source ADO.NET Data Provider or connector that allows Power BI
users to connect to PostgreSQL database.
To get data from PostgreSQL to Power BI, you first need to install the Npgsql
connector. Once the data is available in Power BI, you can apply data modeling
strategies to the data. After the data modeling is done, you can create intuitive
reports based on the filtered data. You can save it and then publish it to Power BI.
254   Chapter 6: Conclusion

You can set the visuals to display updated data by applying manual refresh
and scheduled refresh. To apply scheduled refresh, you need to set up a gateway
connection. As mentioned earlier, a gateway is a piece of software that allows
users to access data located on an on-premises system or network so that it can
be used in a cloud service later.
You can create a content pack that is a complete package of your dashboard,
report, and dataset and can be shared with other users in your organization. As
you publish the content pack, it becomes available in a centralized repository
called AppSource.

Power BI on ERP Applications

One of the most prominent and powerful features of Power BI is its integration
with Dynamics CRM. The ability of Microsoft Dynamics CRM to enhance customer
relationships for any organization make it a perfect choice for entrepreneurs to
choose it over other data sources.
Customer relationship management (CRM) manages interactions between a
company and its customers. A CRM solution simplifies processes and enhances
profitability in different divisions including sales, marketing, and service divisions.
It also centralizes customer information and automates marketing connections.
Microsoft Dynamics CRM improves customer relationships for any type of
organization. It is based on the extended relationship management (xRM) plat-
form and allows partners to customize it through the .NET based framework. It is
easy to use due to its simple user interface (UI).
Microsoft allows organizations to use Microsoft Dynamics CRM solution on
a trial basis and then requires a company to use paid services as per business
requirements. You can easily get data into Power BI using the Get Data button.
Once the data is in Power BI, you can create reports.
The Deep Linking feature allows users to view the information available on
the Dynamics CRM portal by clicking the available link.
Row-level security (RLS) is a feature of Power BI that filters the content based
on a user’s role. You can create roles in Power BI Desktop. These role definitions
are automatically published to Power BI Service when you publish your report to
Power BI Service.
After creating a role in Power BI, you need to add members to the specified
role to allow them to see the filtered results specified in RLS. Once you are done
with all your work on the report, you can easily share it with your colleagues.
Index
A Bar chart, clustered 94, 223, 226
Ability of Microsoft Dynamics CRM 211, 254 Basic radio button 25, 220
Ability to embed Power BI reports and B.BusinessEntityID 89
dashboards 6, 251 Blueprints 3
Access Power BI reports 136, 144 Border color 94
Accounts link 141 Business data, real-time 43, 252
Active users 233 Business insights 2, 251
Add button 113–15, 200–201, 235, 245 Business intelligence (BI) 4, 149, 151, 211,
Add column 21 251
Add data sources 112, 199 Business requirements 212–13, 254
Add grouping button 25 Button 24–25, 95–96, 98–99, 127, 134–37,
Add tile button 36, 52–53 185–87, 202–3, 214–16, 239–41
Add tile dialog box 53 –– account 214
Address 1, 239 –– configure 109, 195
Advanced features of Power BI 5–6 –– download 8
Advanced settings option 200 –– download icon 102
Allow Cortana to access 138–39 –– drop-down 166–67, 169–70
APIs 6, 43–44 –– finish 13, 155
App name text box 43 –– pin 62, 121
App workspaces 35 –– settings icon 110, 129
Apps 6, 32, 34–35, 37, 43–45 –– workspace 48
Apps to help users 34
AppSource 7, 129, 204, 254 C
Area chart, stacked 228–29 Calculated column 74, 84–86, 92–93, 158,
Arguments 83–84 162–65, 253
Authentication method 113 Calculated tables 74, 86–87, 158, 162, 253
Autodetect Calculations 73, 82, 84–87, 92, 162–63, 239,
–– button 75–76, 159 253
–– feature 74–75, 159, 161 Canvas 32–33
–– message box 76–77, 160 Cardinality 80–81, 161–62
Available data sources 15 Category 222, 230
Axis field and subtotal 94 C.CustomerID 89
Azure 7, 133, 252 Change 121, 124, 126–27, 133, 167, 169–71,
–– active directory 7, 133, 142–43 174, 176–77, 179–80
–– APIs 43, 252 Change button 11
–– logic apps 101, 189 Channel name text box 49
–– services 43, 252 Charts 1, 3, 6, 36, 48, 54, 94, 116, 251–52
–– stream analytics 48, 252 –– donut 231–32
Checkbox 9, 67, 126, 136, 172, 203, 240, 248
B –– active 160–61
Background 167–69 –– privacy statement 106, 193
Background option 167, 169, 171, 174–78, –– relationship columns 70
180, 184–85 Chiclet slicers 223–24, 228, 231
Backstage view 29, 96, 185 City 94, 177, 179–80, 226–27

DOI 10.1515/9781547400720-007
256   Index

–– dragged 94 Context 82, 84, 162, 246

City field 177, 179–80 –– row 84
Client ID 45 Context menu 23, 91, 170
Client secret fields 45 Cortana 6–7, 133, 135–41, 143–45, 147, 150,
ClientID 45–46 251, 253
ClientSecret settings 45–46 Cortana answer page 133–34
Close button 76–77, 79, 109, 160, 162, 196 Cortana answer page and publishing 133
Cloud service 5, 100, 150, 189, 253–54 Cortana answer page in Power BI 7
Clustered column chart 94, 179, 231 Cortana option 133, 139
Code, verification 214–15 Cortana search box 145–46
Color 94, 166–67, 169, 171 Country 89, 94, 175, 181, 213, 227, 239
Columns 21, 25, 65, 69, 78, 83–86, 158, 161, C.PersonID 89
163 Create button 48, 50, 52, 238
–– custom 21, 84 Create connections message box 71, 91
–– desired 78 Create content pack button 129, 204
–– list of 78, 161 Create content pack page 130, 205
–– new 21, 85, 92, 158, 163 Create dashboard dialog box 52
Command timeout 70, 89 Create relationship dialog box 78–79,
Commands 20–21, 24 161–62
Company 3, 86, 211, 222, 228–29, 251, 254 Create reports 37
–– revenue by 222, 228 Createdon 223–25
Company name 213 Creating calculated columns 149
–– relevant 214 Creating content packs 129, 131, 204–5, 207,
Comparing Microsoft Power BI and Tableau 3 209
Complete setup 216 Creating relationships 74, 159
Completion status 110, 197 Creating relationships manually 78, 161
Complex algorithms 1, 5, 58, 64, 252 Creating sample data 217
Computer radio button 108, 195 Credentials 30, 73, 101–2, 126, 188–89
Concatenate 85, 92, 163 CRM (customer relationship
Configurations 74, 82, 210, 245–46 management) 211, 217–18, 254
–– successful 124, 189, 253 CRM solutions 211–12, 249, 254
Configure 7, 65, 100, 107, 124, 189, 194, 201, Custom setup page 153
253 Customer relationship management. see CRM
Configuring 102, 107, 127, 194, 203 Customer relationship management
Configuring scheduled refresh 124, 201 solution 249
Connect 3, 14, 16, 19, 73, 99–100, 112, 116, Customer relationships 211–12, 254
251–53 Customize 212, 216, 254
Connect button 15, 38, 117, 142, 156, 219
Connection 71, 91, 100, 114, 200, 253 D
Connection successful message 114, 200 Dashboard button 62, 118, 121–22
Connections, creating 71, 91 Dashboard dialog box 61, 121
Connector 151, 155, 253 Dashboard message box 62, 122
Content 16, 32–33, 35–37, 88, 254 Dashboard tile 58, 73
Content pack 7, 123, 129–30, 132–33, 150, Dashboard title 33–34
204–5, 208–10, 253–54 Dashboards 2–3, 6–7, 31–33, 35–38, 52,
–– organizational 7, 129, 204, 253 61–62, 119, 121–24, 251–54
Content pane 138 –– available 36, 58
 Index   257

–– desired 121, 132 –– desired 58, 124, 201

–– new 52, 61–62 –– large 72
–– specified 62, 122 –– selected 60–61, 125, 139, 202
Dashboards tab 36, 58 –– single 36, 38, 123
Data analysis expressions 82, 162, 239, 253 –– streaming 48–49, 54, 64, 252
Data button 14–15, 66, 69, 89, 95, 116, 123, Datasets list boxes 132, 207
155–56, 219 Datasets tab 38, 51, 58, 123–24, 188, 201
Data colors 94 DAX 74, 82, 84, 158, 162, 239, 253
Data connections 7, 251 –– elements of 162–63
Data connectivity 66, 69, 89, 95 DAX expressions 72, 92, 162, 237, 239
Data dialog box 15, 156, 219–20 DAX formula 82–83, 85–87, 163
Data gateway 102, 106, 189, 193, 201, 253 DAX rules 239
–– configuring on-premises 109, 196 Deep linking in Power BI 233
Data gateway option 102–3, 189–90 DemoReport 60–61
Data insights 8, 212 Deploy 242
Data management option 217–18 Deployment models 212
Data modeling 72, 74–75, 77, 79, 81, 83, 85, Description text box 130, 205
87, 158–59 Destination folder 11
Data models 8, 237, 242 Detecting relationships message box 76, 160
Data option 65, 238 Devices 6, 142–43
Data pane 22 Dialog box 14, 25, 30, 96, 134–36, 185,
Data refresh 123–24, 128–29, 150 213–16, 220, 248
Data source credentials 123–24, 189, 253 –– account 14, 135
Data source name text box 112, 199 –– custom streaming data tile 54
Data source option 112, 199 –– ready 60–61
Data source settings 199 –– refresh history 128
Data source type 112, 199 –– user ID 214
Data sources 3, 5, 99–102, 110, 123–24, DirectQuery 65, 73, 101, 127, 189, 237, 253
188–89, 197, 199–200, 251–54 DirectQuery option 69, 72–74, 88–89, 149
Data text box 119–20 DirectQuery radio button 69, 89
Data visualization 1, 4, 41, 251 Display 56, 86, 124–25, 152, 172, 175, 190,
Data visualization tools 2–4, 41, 251 254
Database 66, 69–70, 73, 82, 89–90, 95, Display name 234
100–101, 112, 127 Display options 16, 67, 157
–– dedicated 48 Download 8–9, 33, 102–3, 152, 189–90
Database text box 66, 69, 89, 95, 112, 156, Download gateway 103, 190
199 DOWNLOAD GATEWAY button 103, 190
Dataset APIs 44 Download page 103, 190
Dataset checkbox 139 Downloading 100–101, 107, 151, 153, 194
Dataset name 123–24, 189 Downloading and installing 100–101, 107,
–– desired 49 194
Dataset owners 244 Downloading Power BI desktop 8
Datasets 7, 35–38, 47–48, 58, 64–66, Downloads folder 103, 152, 190
123–24, 136, 242–44, 252–54 Drop-down list 25, 54–55, 126–27, 161,
–– applicable 243 166–67, 169, 199–200, 203, 213–14
–– associated 36 Drop-down menu 129, 138, 204, 208
–– available 58, 201 Dynamics 213, 217, 219–20, 233
258   Index

Dynamics CRM 5, 149, 211, 217, 219–20, 249, First name text box 213, 234
252, 254 Firstname 85, 92, 163–64
–– benefits of Microsoft 212, 249 FirstName column 85, 164
Dynamics CRM portal 233, 249, 254 Focus mode 63
Font 169
E Font size 94, 169
Edit 36–37, 74, 159 Format 94, 166–68, 170, 177, 179, 223–24
Edit queries 19, 23 –– visualized 3
Elements, syntax 82–83 Format icon 27, 133, 170, 173, 175, 177, 179,
Ellipsis icon 35, 58–59, 62, 112, 123–24, 189, 181
199, 243–44, 246 FORMAT IMAGE pane 94, 167
Embed Power BI reports 6, 43, 64, 251 Formatting settings 27–28, 170, 173, 175,
Embed Power BI reports and dashboards 6 177, 179, 181
Employees 86–87, 163, 222, 226 Formatting toolbar 168–69
–– revenue by 145, 222 Formula 82–84
End-users 2 Formula bar 85, 87, 92, 163
EOMONTH 224 Function name syntax 83–84
ERP applications 211–12, 214, 216, 218, 220, Functions 46, 82–85, 87, 100, 162–63, 211,
222, 224, 226, 228 239, 253
Error 72–73, 101–2
Excel 3, 35, 37–38, 82, 149, 252 G
= Gateway 99–101, 104–12, 115, 149, 189,
191–99, 253–54
F –– available 110–11, 197–98
Features –– configure/register 107, 194
–– advanced 6, 41, 251, 253 –– configuring 99–100, 107, 194
–– linking 233, 249, 254 –– enterprise 100
Field blank 70, 89 –– installing 101
Fields 17, 26–28, 72, 78, 81, 84–85, 94, 170 –– new 108, 195
–– product 27 –– selected 111, 198
–– specified 71, 91 Gateway cluster settings 111–12, 198
–– totaldue 179, 181 GATEWAY CLUSTERS 110–11, 197–98
FIELDS pane 17–18, 26–27, 68–69, 71, Gateway configuration 110, 197
85–87, 91, 94–95, 163–64, 221 Gateway connection 124–25, 189, 202,
File 3, 9, 16, 123, 192 253–54
–– msi 9, 152 Gateway connection node 125, 202
–– selected 9, 152 Gateway demogateway 109, 196
File name 9 Gateway link 112, 199
File tab 29, 96, 185 Gateway registration 108, 195
Filter context 84 Gateway setup 100–101, 103, 105, 107, 109,
Filter direction 161–62 111, 113, 115, 189
Filtered results 226, 229, 244, 254 Gateway text box 107, 194
Filtering 48, 82 Gateway type 104, 191
Filters 81, 83–84, 222–23, 226, 229–30, 237, Gateways option 110–11, 197–98
240, 247, 254 General option 168–69, 173, 175, 178–79,
–– security 240 182
Filters content 237, 249
 Index   259

Getting data 65, 67, 69, 71, 73, 155, 157, 219, Installing Microsoft Power BI Desktop 12
221 Installing npgsql 154
Graphs 1, 6, 36, 116, 252 Installing npgsql connector 151, 153
Group 24–25, 129–30, 204–5, 228, 244–45 Installing on-premises data gateway 189
–– security 129, 204, 240 Installing Power BI Desktop 8
Group by drop-down list 25 Integration 7, 150, 251, 254
Grouping 25 Interactive reports 5, 7, 65, 151
Groups radio button 130, 205 Interface, easy-to-use 3
Internalemailaddress 239
H Introducing data visualization 1–2, 4, 6, 8,
Help 33, 35, 43, 86, 123 10, 12, 14, 16, 18
Help of Power BI 2, 5
Help users 38, 123 K
Home tab 19–20, 23, 26, 66, 69, 94–95, 159, Key features 5, 251
161, 167–68 Key features of Power BI 4–6, 251
Https 8, 43, 84, 101–2, 136, 152, 189, 213 Key metrics 5, 251
Keywords 119–20, 133, 145, 253
I, J
Icon 85, 87, 92, 124, 138, 164, 166, 239 L
–– visual 61, 121 Languages 212, 214, 249
Icon buttons 33 Last name text box 213, 234
–– labeled 35, 37 Lastname 85, 92, 164
Image 94, 130–32, 167, 205–7 LastName column 85, 164
–– selected 132, 167, 207 LastName fields 163
Image button 94, 167 Launch Microsoft Power BI desktop 13
Import 65, 69, 74, 123, 157, 251–53 Launch Power BI desktop 13–14, 66, 69, 89,
Import data 219, 238, 253 95, 155
Import option 65, 72–73, 88, 95, 149 Launch Power BI service 110, 124, 129, 197,
Import radio button 66, 95 201, 204
Imported data 65 License agreement 10, 152–53
Importing data 118, 212 Limitations 72–73
Importing data message box 118 Linetotal 83
In-depth information 149–50, 210 Link 8, 14, 43, 84, 102–3, 136, 152, 189–90,
Infrastructure support 3, 251 248–49
Insights 1, 4–5, 58, 60–61, 63–64, 251 –– available 233, 249, 254
Insights feature of Power BI 64, 252 –– sample data 218
Insights message box 60 –– samples 116–17
Insights option 59–60 –– upload 131, 206
Install 8, 100–102, 104–6, 152, 189, 191–93, Load 16, 67, 70, 73, 90, 95, 220
217, 253 Load button 16, 67, 70, 90, 95, 157, 220
Install button 11, 106, 154, 193 Load pane 68
Install Microsoft Power BI Desktop 11 Loans 222, 230
Install npgsql 154 Loans by category 230–31
Install page 105, 192 Loans summary 222, 231–32
Install Power BI Desktop 8 Location 16, 30, 65, 96, 131, 167, 185, 227,
Installation 104–7, 152, 154, 191–94 234
–– start data gateway 103, 190 Login 43
260   Index

Lookup table 80, 82 New button 78, 161

LOOKUPVALUE 239 New column name text box 25
New dashboard radio button 61, 121
M New on-premises data gateway name text
Map 94, 223, 227 box 108, 195
Mapping details 223–25 New streaming dataset wizard 49
Members 129, 204, 243–46, 254 New user window 234
–– team 7, 129, 204 Next button 9–11, 49–50, 53–55, 103–5, 108,
Menu 32, 112, 123–24, 189, 199, 243–46 152–53, 190–92, 195, 214–15
Microsoft 2, 65, 211–13, 251–52, 254 Next quarter 224–25
Microsoft Azure 3, 30, 252 Node, data source credentials 126
Microsoft Dynamics CRM 211–12, 249, 254 Npgsql 151–52, 154–55
Microsoft Dynamics CRM online 213, 215, Npgsql connector 151–52, 253
217, 233, 249 Npgsql-3.2.7, 152
Microsoft Dynamics CRM solution 213, 254 Number 21, 35, 73, 80, 83–84, 86, 162, 211,
Microsoft Power BI 2–4, 251 245
Microsoft Power BI and Tableau 3 –– large 5, 7, 252
Microsoft Power BI desktop 9–13
Microsoft stack 65–66, 68, 70, 72, 74, 76, O
78, 80, 82 Occurrences 80, 162
Model 74, 82, 84, 162, 239, 253 –– multiple 80
Modeling tab 85–87, 92, 163, 238, 240 Office 34, 86, 129, 204
OneDrive 124
N On-premises data gateway 65, 100–102, 104,
Name 69–70, 82–83, 85, 87, 89–90, 92, 108, 107, 110, 189, 191–92, 194, 197
163, 243–46 On-premises data gateway page 105–6,
–– dashboard/report 33 192–93
–– desired 24–25, 30, 43, 52, 61, 86, 92, 96, On-premises data gateway window 107–9,
112 194–96
–– dragged 94 On-premises version 7, 217, 251
–– field 172, 175, 180–81 Open button 16, 131, 167, 206
–– PostgreSQL 151 Open dialog box 16, 131, 167, 206
–– rename 181 Open Power BI desktop 219
–– required 85, 163 Open Power BI service 58, 116, 244
–– server 66, 69–70, 89–90, 95 Open Source stack 151–52, 154, 156, 158,
–– specified 24, 30, 52, 97, 185 160, 162, 164, 166, 253
–– text box 24, 133, 166 Opportunities tables 239
Natural language 6–7, 83, 116, 119, 133 Option 29, 38, 72, 82, 96, 153, 156, 185, 219
Natural language query, support for 6, 251 –– column headers 183
Natural language querying 116–17, 119, 121 –– desired 25, 161
Navigate 8, 16, 31, 43, 96, 122, 131, 233, –– items 174, 176
243–45 –– refresh dashboard tiles 124
Navigation 3, 32 –– rename 91
Navigation pane 31–32 –– total 94, 184
Navigator dialog box 16, 157 –– transparency 166–67, 169
Navigator window 67, 95, 157, 220–21 OrderDate field 94, 170, 181
Network 100, 150, 189, 253–54
 Index   261

Organization 1–3, 6–7, 35–36, 101, 129–30, –– dashboards 6, 43, 47, 101

204–5, 211–14, 245, 251–54 –– dashboards and reports 7, 133, 253
Organization radio button 130, 205 –– data refresh in 123, 125, 127, 188–89, 191,
Owners 37, 101 193, 195, 197, 199
–– datasets 2
P –– dialog box 39–40, 98, 135–36, 186–87
Package, complete 7, 129, 204, 253–54 –– features 129
Page 11–12, 104–5, 107, 142–43, 154, 170, –– gateway 101
179–80, 191–92, 194 –– home 34–35
–– account 136–37 –– integrating 65, 133, 140, 149, 151
–– next 10, 49–50, 108, 143, 195 –– integration 133, 135, 137, 139, 141, 143,
Page background option 166 145, 147, 211
Page information option 166 –– link 39, 147–48, 187
Page size category 133 –– loads 124
Panes 21–22, 117 –– logo 167
–– left 15, 18, 21, 111, 116, 124, 198, 201, 243 –– message box 98–99
–– right 15–16, 110–11, 116, 124, 138, 142, –– on ERP applications 211–12, 214, 216, 218,
156–57, 197–98, 201 220, 222, 224, 226, 228
Password 100, 108, 114, 195, 200, 214 –– page 190
–– relevant 14, 135, 137 –– premium 4
Password text box 108, 113, 135, 137, 143, –– pro 4
195, 200, 214 –– pro account 7, 129, 204, 253
Path 11, 106 –– query 6, 119, 124
Performance and load 73 –– querying 119
Person person 164 –– users 35, 73, 151, 253
Person person table 164 –– variants of 7, 9, 11, 13, 15, 17, 19, 21, 23
Personal mode 100–101, 189 –– web client 48
Phone number 163, 213, 215 –– window 43
Pie chart 27, 94, 177, 223, 225, 228, 231–32 Power BI account 4, 14, 43, 133, 144–45
Pie chart visual 225 –– free 4
Pin 36, 47, 61–62, 121 Power BI and SQL Server 253
Pinning 32, 36, 62, 122 Power BI and Tableau 251
POSTGRES 151 Power BI desktop 7–8, 18–19, 65–69,
PostgreSQL 5, 149, 151, 155, 210, 252–53 88–89, 220–21, 237–38, 240, 242–44,
PostgreSQL data source 199 251–52
PostgreSQL database 151, 155–56, 165, 253 –– collating 14
PostgreSQL database dialog box 156–57 –– role in 240, 242, 246, 254
Power BI 4–7, 35–39, 64–74, 80–86, –– user interface of 13–14
122–24, 144–52, 154–58, 186–90, Power BI desktop for publishing 136
251–54 Power BI reports 7, 123
–– app 35 –– creating 101, 123
–– Azure application 43–44, 46, 48, 50, 52, Power BI reports and dashboards 6, 43
54, 56, 58, 60 Power BI reports and visualizations 123
–– building blocks 31 Power BI REST APIs 48, 252
–– cache 65 Power BI service 30, 40–41, 47–48, 98,
–– credentials 140 188–89, 237–38, 242–44, 246–47,
–– credentials to Windows 140 251–54
262   Index

–– user interface of 31 Real-time streaming of data 43, 48, 64

Power failure 96 Recipients 37, 248
Power pivot 82 Recovery key 108, 195
Power view 37 Refresh 65–66, 69, 73, 123–24, 126, 203
PowerApps 101, 189 Refresh button 69, 123, 188
PowerBIGatewayInstaller.exe 103, 190 Refresh data 123–24
PowerBIGatewayInstaller.exe file 103, 190 Refresh failure notification email 126, 203
Progress 60, 68, 71, 76, 95, 105–6, 154, 160, Refresh frequency 126–27, 203
192–93 Region 82, 84–85, 92
Progress of installation 106, 193 Register 43–44, 64, 107–8, 194–95
Project 80–81 Register app 44–45
ProjectDetails 80 Relationship management, extended 212, 254
ProjectName column 81 Relationships 3, 19, 74–75, 77–78, 80–82,
ProjectName Priority StartDate EndDate 81 149, 151, 158–62, 240
ProjectName StartDate 80 –– degree of 80, 162
ProjectName StartDate EndDate 81 –– new 79, 162
ProjectPriority 80–81 –– relationships in 78, 161
ProName column 81 Relationships button 75, 78, 159, 161
Publish button 39, 98, 132, 134, 186, 207, Relationships window 75, 77–79, 159–62
242 Reminder 105, 192
Publishing 38–40, 73, 98–99, 101, 132–33, Rename 85, 91
136, 186–88, 208, 242 Rename orderdate 181
–– status of 39, 187 Report and dashboard APIs 44
PubNub streaming dataset 48, 64, 252 Reports tab 37, 138
Push dataset 47–48, 64, 252 Response time 73
Revenue 145, 211, 222, 226, 228
Q Ribbon 20–21, 29, 96, 185
Q&A 6, 116, 129, 139 RLS (Row Level Security) 73, 237, 240,
Q&A box 33 242–44, 254
Q&A option 133 Robot 214–15
Q&A page 119–20 Roles 234–35, 237–47, 254
QuarterNo 224–25 –– desired 245
Queried SQL server statement 71, 91 –– new 238
Queries pane 21–24 –– selected 241, 246
Query 6–7, 20, 22–26, 65, 70–73, 90–91, –– specified 244, 254
127, 251, 253 –– user’s 237, 249, 254
Query Cortana 133 Roles button 238, 240
Query editor 19–21, 23, 26, 72 Roles definitions 237, 254
QUERY SETTINGS pane 22–24 Roles dialog box 238, 240–41
Quick insights 5, 58, 64, 73 ROUNDUP 224–25
Row-Level Security in Power BI 237, 239, 241,
R 243, 245
Radio button 104, 191, 214 Row-Level security page 244–45
–– desired 61, 234
–– on-prem data gateway 125, 202 S
Real-time streaming datasets 47, 64, 252 Sale SalesOrderDetail table 83
Real-time streaming in Power BI 47 Sales 82, 85, 89, 92, 211–12, 254
 Index   263

–– total 82–83 Sp.CountryRegionCode 89
Sales salesorderheader table 170, 177, Specifying data source settings 113, 199
179–81 Specifying installation folder 106, 193
Sample data 217, 219 Specifying username 114, 200
Saving 29–30, 96–97, 185 Specifying values 46, 51
Schedule refresh 124, 126, 189, 203, 253 SQL Server 5, 65–67, 69, 71, 73, 110, 112,
Schedule refresh icon 124–25, 189, 201–2 149–50, 252–53
Scheduled refresh 101, 123–24, 127, 188–89, SQL Server data source 112
201, 203, 210, 253–54 SQL Server database dialog box 66–67,
Scheduled refresh node 126, 203 69–70, 89–90, 95
Search engine 116 SQL Server database tables in Power BI 73
Security 73, 238 SQL Server option 66, 69, 89, 95, 112
Security option 243–45 SQL Server reporting services (SSRS) 36, 212
Selected gateway cluster 110, 197 SQL statement 70, 89
Server text box 66, 69, 89, 95, 112, 156, 199 SSRS (SQL Server Reporting Services) 36,
Set 65, 80–82, 94, 123–24, 166–71, 181–82, 212
184, 188–89, 252–54 State name 175
Setting cardinality of relationships 74 States 80, 85, 89, 94, 164, 181
Setting gateway connection 126, 202 –– dragged 94
Setting refresh frequency 128 Status 106, 109, 125–26, 167, 169–71, 174,
Settings 110–11, 124–26, 139–40, 166–71, 176–77, 179–80, 202–3
173–84, 189, 197–98, 200, 202–3 Step-by-step procedure 4, 64, 150
Settings button 217 Stepname 232
Settings icon 140–41, 197, 204, 208 Stream 48, 50–51
Settings option 124, 138–39, 189 Streaming, real-time 6, 47, 49, 51, 53, 55,
Settings page 125, 139, 202 57–59, 61, 63
Settings window 141 Streaming dataset option 48
Setup wizard 9–13, 152, 155 Streaming dataset UI 48, 252
Setup wizard page 9, 13, 152, 155 Strings 85, 163
Share 7–8, 35, 39, 98, 101, 134, 242, Subsets 5, 58, 64, 100, 123, 188, 252
247–48, 254 Subtitle 56
Share button 247–48 Subtotal 94, 177, 180–81
Share content pack 6–7, 251 Subtotal field 177, 181
Share reports 7 Success dialog box 118–19
Sign 5, 14, 102, 107–8, 135–37, 189, 194, Summary 41, 64, 149, 210, 249
213, 215 Support 3, 6, 73, 129, 212, 251
Sign in button 14, 107–8, 134–35, 137, 143, –– customer/technical 4, 251
194–95 –– technical 4
Sign in dialog box 14, 134–35 Support tickets 4
Sign in text box 134, 136 Syntax 82
Slicer 26–27, 172, 175, 222–23, 226, 228–30 System
Slider 126, 133, 167, 169–71, 174, 176–77, –– object-relational database
179–80, 184, 203 management 151, 253
Sources 47–49, 101, 211, 221, 252 –– on-premises 100, 150, 189, 253–54
–– back-end data 73–74 System users 222
–– multiple 3 Systemusers 239
–– multiple data 5, 8, 123, 251
264   Index

T Trial Power BI Pro account 5

Table names 67 Trial set 216
Tableau 2–4, 251
Tableau and Microsoft Power BI 3 U
Tableau desktop 4 Understanding gateways 100
Tableau online 4 Understanding Power BI 2
Tableau server 4 Update 47, 65, 123–24, 188
Tables 67–68, 74, 77–78, 80–84, 86–88, Update data 80, 123, 188
157–63, 220–23, 227–28, 239 Update visuals 188
–– desired 78, 95, 161, 220, 239 Updated data 69, 73, 123–24, 188, 254
–– first 78, 80, 161–62 Upload 130–31, 205–6
–– imported 68–69 Upload icon 130, 205
–– loading 95, 157 User installs 100, 189
–– new 26, 86–87 User interface (UI) 3, 20, 31, 211–12, 249, 254
–– person address 177, 179–80 Username 113, 239
–– person countryregion 172, 181 Username text box 113, 200, 214, 234
–– person stateprovince 175, 181 Users 1–4, 6–8, 35, 72–73, 82, 188–89,
–– region 85, 92 200–201, 233–34, 251–54
–– second 80, 162 –– authorized 100, 189
–– selected 65, 69, 78, 80, 85, 95, 157, –– available 237
161–64, 221 –– multiple 101, 189
–– single 82, 86 –– new 233, 235–36
Tabs 15, 20–21 Users tab 114, 200
Tasks 19, 26, 33, 35, 82, 94, 166, 222
Text 83, 168–69, 214, 238–39 V
Text box 11, 36, 94, 106, 133–34, 136, 168, Validating 240–41, 246–47
238, 248 Values 50, 80, 82–84, 168–69, 179, 181, 184,
–– company name 213 228, 231–33
–– dashboard name 52 –– field 170, 172, 175
–– dataset name 49 –– repeating 81
–– display name 234 Values field 94
–– file name 185 Values option 184
–– height 168–69 Values value 177, 180–81
–– minutes 70, 89 View content pack option 208–9
–– recovery key 108, 195 View insights button 60
–– title 130, 205 View tab 21
Text box button 94, 168 Visual acts 226, 229
Theme colors palette 166–67, 169 Visual container refresh 124
Tile refresh 124 Visual highlights 227
Tiles 32, 35–36, 48, 57, 66, 119, 121, 124, 252 Visual studio, open Microsoft 212
–– collection of 32, 35, 252 Visualization design page 54, 56
Title 56, 94, 97 Visualization support 3
Title option 170–71, 174, 176–77, 179–80 Visualization type 54–55
Tools 2–3, 37, 251 Visualizations 2–3, 7–8, 33, 38, 58, 62, 123,
–– reporting 2, 149, 151, 251 251
TotalDue value 94 –– creating complex 3
Transform tab 20–21, 24 –– selected 3, 62
 Index   265

VISUALIZATIONS pane 26–27, 94, 121, Windows 6, 19, 21, 23–24, 70, 90, 108, 140,
169–70, 172, 175, 177, 179–80 145
VISUALIZATIONS pane and selecting –– confirmation 236–37
fields 86, 164 –– feature of 7, 133, 140
Visualizations/visuals 36, 252 –– gateways 110–11, 197–98
Visualizing 48, 252 Wizard 13, 213
Visuals 1, 26, 28–29, 47–48, 65, 72–74, –– on-premises data gateway installation 107,
123–24, 226, 251–54 194
–– creating 26, 82, 85, 162 –– on-premises data gateway installer 103–4,
–– desired 93, 95 190–91
Visuals refresh rate 73 Work area 26–28
Workbooks 31, 35, 38, 101, 252
W, X Workspace window in Power BI Service 123
Web app 6, 43, 45, 47, 64, 251–52 Workspaces 31–33, 35–38, 98, 243
Web app for Power BI 64
WeekNo 224 Y, Z
WEEKNUM 224 YEAR 84, 224–25