0% found this document useful (0 votes)
89 views6 pages

TO-92 塑封封装 NPN 半导体三极管。Silicon NPN transistor in a TO-92 Plastic Package. 

This document provides data and specifications for the 2N2222 NPN transistor in a TO-92 plastic package, including: - It is a low power silicon NPN transistor intended for general amplifier applications. - The transistor has a maximum collector current of 600mA, collector power dissipation of 625mW, and junction temperature of 150°C. - Electrical characteristics include a typical DC current gain of 100-300 and transition frequency of 250MHz. - The document provides pinout, package dimensions, and markings for identification.

Uploaded by

primekronos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
89 views6 pages

TO-92 塑封封装 NPN 半导体三极管。Silicon NPN transistor in a TO-92 Plastic Package. 

This document provides data and specifications for the 2N2222 NPN transistor in a TO-92 plastic package, including: - It is a low power silicon NPN transistor intended for general amplifier applications. - The transistor has a maximum collector current of 600mA, collector power dissipation of 625mW, and junction temperature of 150°C. - Electrical characteristics include a typical DC current gain of 100-300 and transition frequency of 250MHz. - The document provides pinout, package dimensions, and markings for identification.

Uploaded by

primekronos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

2N2222

Rev.F Mar.-2016 DATA SHEET

描述 / Descriptions
TO-92 塑封封装 NPN 半导体三极管。Silicon NPN transistor in a TO-92 Plastic Package.


特征 / Features
小功率表面贴片封装应用。
low power surface mount applications.

用途 / Applications
用于一般放大。
General amplifier.

内部等效电路 / Equivalent Circuit

引脚排列 / Pinning

12
3
PIN1:Collector PIN 2:Base PIN 3:Emitter

放大及印章代码 / hFE Classifications & Marking

见印章说明。See Marking Instructions.

http://www.fsbrec.com 1/6
2N2222
Rev.F Mar.-2016 DATA SHEET

极限参数 / Absolute Maximum Ratings(Ta=25℃)

参数 符号 数值 单位
Parameter Symbol Rating Unit
Collector to Base Voltage VCBO 60 V
Collector to Emitter Voltage VCEO 30 V
Emitter to Base Voltage VEBO 5.0 V
Collector Current - Continuous IC 600 mA
Collector Power Dissipation PC 625 mW
Junction Temperature Tj 150 ℃
Storage Temperature Range Tstg -55~150 ℃

电性能参数 / Electrical Characteristics(Ta=25℃)

参数 符号 测试条件 最小值 典型值 最大值 单位


Parameter Symbol Test Conditions Min Typ Max Unit
Collector to Base Breakdown
VCBO IC=10μA IE=0 60 V
Voltage
Collector to Emitter Breakdown
VCEO IE=10mA IB=0 30 V
Voltage
Emitter to Base Breakdown
VEBO IE=10μA IC=0 5.0 V
Voltage
Collector Cut-Off Current ICBO VCB=50V IE=0 0.01 μA
Emitter Cut-Off Current IEBO VEB=5.0V IC=0 0.1 μA
DC Current Gain hFE VCE=10V IC=150mA 100 300

Collector-Emitter Saturation VCE(sat)(1) IC=150mA IB=15mA 0.4 V


Voltage VCE(sat)(2) IC=500mA IB=50mA 1.6 V
VBE(sat)(1) IC=150mA IB=15mA 1.3 V
Base-Emitter Saturation Voltage
VBE(sat)(2) IC=500mA IB=50mA 2.6 V
VCE=20V IC=20mA
Transition Frequency fT 250 MHz
f=100MHz
VCB=10V IE=0
Collector Output Capacitance Cob 8.0 pF
f=1.0MHz
VCC=30V VBE=0.5V
Turn-On Time Ton 35 ns
IC=150mA IB1=15mA
VCC=30V IC=150mA
Turn-Off Time Toff 285 ns
IB1=IB2=15mA

http://www.fsbrec.com 2/6
2N2222
Rev.F Mar.-2016 DATA SHEET

电参数曲线图 / Electrical Characteristic Curve

http://www.fsbrec.com 3/6
2N2222
Rev.F Mar.-2016 DATA SHEET

外形尺寸图 / Package Dimensions

http://www.fsbrec.com 4/6
2N2222
Rev.F Mar.-2016 DATA SHEET

印章说明 / Marking Instructions

BR
N2222
****

说明:
BR:    为公司代码
N2222:  为型号代码
****:  为生产批号代码,随生产批号变化。
Note:
BR: Company Code.
N2222: Product Type.
****: Lot No. Code,code change with Lot No.

http://www.fsbrec.com 5/6
2N2222
Rev.F Mar.-2016 DATA SHEET

波峰焊温度曲线图(无铅) / Temperature Profile for Dip Soldering(Pb-Free)

说明: Note:
1、预热温度 25~150℃,时间 60~90sec; 1.Preheating:25~150℃, Time:60~90sec.
2、峰值温度 255±5℃,时间持续为 5±0.5sec; 2.Peak Temp.:255±5℃, Duration:5±0.5sec.
3、焊接制程冷却速度为 2~10℃/sec. 3. Cooling Speed: 2~10℃/sec.

耐焊接热试验条件 / Resistance to Soldering Heat Test Conditions

温度:270±5℃ 时间:10±1 sec. Temp:270±5℃ Time:10±1 sec

包装规格 / Packaging SPEC.

散件包装 / BULK

Package Type Units 包装数量 Dimension 包装尺寸 (unit:mm3)


Units/Bag Bags/Inner Box Units/Inner Box Inner Boxes/Outer Box Units/Outer Box
封装形式 Bag 袋 Inner Box 盒 Outer Box 箱
只/袋 袋/盒 只/盒 盒/箱 只/箱

1,000 10 10,000 5 50,000 135×190 237×172×102 560×245×195


TO-92
1,000 10 10,000 10 100,000 135×190 237×172×102 560×245×375

编带包装 / AMMO

Package Type Units 包装数量 Dimension 包装尺寸 (unit:mm3)


Units/tape Tape/Inner Box Rows/Inner Box Inner Boxes/Outer Box Units/Outer Box
封装形式 Inner Box 盒 Outer Box 箱
只/纸带 纸带/盒 纸带层/盒 盒/箱 只/箱
小箱 480×346×235,
TO-92 3,000 1 120 10 30,000 328×230×42
大箱 547×407×268

使用说明 / Notices

http://www.fsbrec.com 6/6

You might also like