0% found this document useful (1 vote)
106 views2 pages

Bodice Sloper: Module 1 - Prepare The Dress Form

This document provides instructions for draping a basic bodice sloper. It explains that the lesson will teach fundamental pre-draping procedures like measuring, cutting, and manipulating muslin on a dress form to create a 3D pattern. The sloper can later be used as the foundation for other pattern making projects or attached to a skirt to create a dress. The document outlines two modules - the first prepares guidelines on the dress form and the second extracts measurements to prepare the front muslin block.

Uploaded by

Liyakath Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (1 vote)
106 views2 pages

Bodice Sloper: Module 1 - Prepare The Dress Form

This document provides instructions for draping a basic bodice sloper. It explains that the lesson will teach fundamental pre-draping procedures like measuring, cutting, and manipulating muslin on a dress form to create a 3D pattern. The sloper can later be used as the foundation for other pattern making projects or attached to a skirt to create a dress. The document outlines two modules - the first prepares guidelines on the dress form and the second extracts measurements to prepare the front muslin block.

Uploaded by

Liyakath Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Bodice Sloper

This lesson will teach you how to drape the basic bodice. This introductory lesson would
be the first draping lesson that you would complete if you were studying at a fashion
college.

This lesson incorporates all of the fundamental pre-draping procedures, including


measuring the dress form to prepare your muslin blocks, measuring, tearing, blocking
and pressing your muslin pieces and the importance of adding guidelines for balancing
the grain as you drape. You will learn how to manipulate the muslin on the dress form to
create your 3D draped pattern and then how to mark the drape before transferring it to
the table for trueing. In addition to learning how to drape, you will learn all about the
tools and how to use them, so that the result is a perfect fitting bodice sloper.

This sloper can later be used as the foundation for many of your pattern making projects
or you can attach the bodice to a skirt to create a cute dress style.

MODULE 1 • PREPARE THE DRESS FORM

STEP DESCRIPTION

1 Apply style tape to your dress form to establish the bust level. Tape from
center front to the side seam.

2 Then on the back at the shoulder blade level, which is 1/4 th the distance
from your neckline and waistline, tape from the center back to the
armhole ridge. Be sure that both guidelines are parallel to the floor.

MODULE 2 • EXTRACT MEASUREMENTS

STEP DESCRIPTION

1 To prepare your front muslin block, measure across the bust level from
STEP DESCRIPTION

center front to side seam and add 4” (10.2cm). This will be the width of
your front block.

You might also like