Scribd
Upload
28 views3 pages

Design For Dimension of Footing

The document provides design details for the footing F1 of a column. It specifies the material properties, loads from analysis, and dimensions of the column. It then shows the design calculations to determine the dimensions, reinforcement, and check various limit states of the footing. The footing is designed as a rectangular footing of size 2.4m x 2.4m with 16 bars of 20mm diameter as main reinforcement in both directions to resist the bending and shear demands on the footing.

Uploaded by

Irish サルタン タムビス
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
28 views3 pages

Design For Dimension of Footing

The document provides design details for the footing F1 of a column. It specifies the material properties, loads from analysis, and dimensions of the column. It then shows the design calculations to determine the dimensions, reinforcement, and check various limit states of the footing. The footing is designed as a rectangular footing of size 2.4m x 2.4m with 16 bars of 20mm diameter as main reinforcement in both directions to resist the bending and shear demands on the footing.

Uploaded by

Irish サルタン タムビス
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

Design of Footing F1

f'c = 24.2 MPa Column width = 400 mm


fy = 414 MPa Column depth = 800 mm
ß1 = 0.85 Assume thickness = 450 mm 0.45
Pu = 289.274 kN (from STAAD output) Bar diameter = 20 mm
Mu = 74.51 kN-m (from STAAD output) d= 354 mm
Max. Pu = 367.377 kN Soil pressure = 98 kN/m^2

Design for Dimension of Footing:


Pn = 445.03692308 kN p(net) = 79.54 kN/m^2
Mn = 114.63076923 kN-m
e= 0.2575758623 m = 257.57586233122 mm

L (m) B (m) BL (m^2) q(max) q(min) q(ave.)


2.4 2.491047819 5.97851476559848 79.543 17.23 48.385596

Try: B = 2.4 m
L= 2.4 m 2.4 m
Area, A = 5.76 m^2
p(design)= 63.780729167 kN/m^2
q= 63.780729167 kN/m^2

Design for Depth of Footing:


For one-way shear action:
d= 75.179942115 mm 2.4 m
Total depth, h = 161.179942115413 mm
Try h = 450 mm
Actual d = 364 mm
For two way shear action:
Vu = 310.65705268 kN
phiVc = 1726.1800799 kN O.K.

Design for Main Reinforcement:


Check Load Transfer:
phiPn = 4278.56 kN O.K.
min Req'd As = 800 mm^2
Use: 12 20 mm diam. Bars
As = 3769.9111843 mm^2
75 mm clear
Long Direction
cover
Mu = 48983600 N-mm
Rn = 0.1711568092 MPa
m= 20.126397667
rho = 0.0004151567 rho(min) = 0.0033816425121
As = 2954.2028986 mm^2 O.K.
Use: 16 20 mm diam. Bars, As = 5026.5482 mm^2

Short Direction
Mu = 76536875 N-mm
Rn = 0.2674325144 MPa
rho = 0.0006502269 rho(min) = 0.0033816425121
As = 2954.2028986 mm^2 O.K.
Use: 16 20 mm diam. bars, As = 5026.5482 mm^2
wt of footing

98

450

You might also like