Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Acid Resistance Bricks

    Uploaded by

    Dũng Lê
    The document specifies requirements for acid resistance bricks and their mortar. Acid resistance bricks must have a cold crushing strength over 700 kg/cm2, flexural strength over 100 kg/cm2, water absorption under 2%, and bulk density of 2.250 kg/cm3. The mortar used must be potassium or sodium silicate-based and resist a wide range of acids and temperatures. It lists specifications for working time, compressive strength, flexural strength, bond strength, and toluene absorption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Acid Resistance Bricks

    Uploaded by

    Dũng Lê
    24 views2 pages
    The document specifies requirements for acid resistance bricks and their mortar. Acid resistance bricks must have a cold crushing strength over 700 kg/cm2, flexural strength over 100 kg/cm2, water absorption under 2%, and bulk density of 2.250 kg/cm3. The mortar used must be potassium or sodium silicate-based and resist a wide range of acids and temperatures. It lists specifications for working time, compressive strength, flexural strength, bond strength, and toluene absorption.

    Original Description:

    acid-resistance-bricks

    Original Title

    acid-resistance-bricks

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document specifies requirements for acid resistance bricks and their mortar. Acid resistance bricks must have a cold crushing strength over 700 kg/cm2, flexural strength over 100 kg/cm2, water absorption under 2%, and bulk density of 2.250 kg/cm3. The mortar used must be potassium or sodium silicate-based and resist a wide range of acids and temperatures. It lists specifications for working time, compressive strength, flexural strength, bond strength, and toluene absorption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    Acid Resistance Bricks

    Uploaded by

    Dũng Lê
    The document specifies requirements for acid resistance bricks and their mortar. Acid resistance bricks must have a cold crushing strength over 700 kg/cm2, flexural strength over 100 kg/cm2, water absorption under 2%, and bulk density of 2.250 kg/cm3. The mortar used must be potassium or sodium silicate-based and resist a wide range of acids and temperatures. It lists specifications for working time, compressive strength, flexural strength, bond strength, and toluene absorption.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Specification of acid resistance bricks :-

    specifications results

    cold crushing strength > 700 kg/cm2

    flexural strength > 100 kg/cm2

    water absorption <2%

    bulk density 2. 250 kg/cm3

    sizes as per standard sizes, thickness 10mm to 100mm

    properties as per is 4860 (class-i) and astm c- 279

    chemical composition sizes avilable

    length width thickness

    al2o3 22-24 % 229 114 10 mm

    sio2 60-65 229 114 25 mm

    fe2o3 1. 0 – 2. 0 % 229 114 38 mm

    alkalies 10-12 % 229 114 50 mm

    229 114 65 mm

    229 114 75 mm

    Mortar for A. R. Bricks:

    • Application of Impervious mastic membrane as a Primer; to be apply between


    the surface & brick Lining
    • Potassium Silicate Base Cement which resists against wide variety of acids
    &entire range of temperature upto 8000C
    • Sodium Silicate Base Cement which resists temperature upto 650 0C can be use
    as bedding materials of A.R. Brick Lining
    • Joining will be done with Silicate – Furan Base Cement; from the Top

    The key specifications of the mortar offered by us include:

    specification of silicate type mortar :-

    sr. specifications potassium sodium


    No silicate silicate
    . type type

    working time at
    01 20-25 15-20
    270c (mins. )
    compressive
    strength minimum
    02 450 350
    kg/cm2 ( after 7
    days )

    flexural strength
    03 minimum kg/cm2 150-200 100-150
    (after 7 days )

    bond strength
    04 6-7 5-6
    minimum kg/cm2

    absorption of tolune
    05 15% 18%
    max % by weight

    You might also like