Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Poly Cure 503

    Uploaded by

    Mamoon Shahid

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Poly Cure 503

    Uploaded by

    Mamoon Shahid
    46 views2 pages

    Original Title

    Poly-Cure-503

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views2 pages

    Poly Cure 503

    Uploaded by

    Mamoon Shahid

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    borchers

    Poly-Cure® 503
    Accelerator for Gel Coats and UPR Systems

    Physical Characteristics Features


    Co: 2.90 - 3.10 % • Blend of metal salts of 2-ethylhexanoic acid in mineral spirits
    Metal content
    K: 8.40 - 8.60 % • Designed as an alternative to cobalt promoters as a
    65 - 77 % ASTM D polyester accelerator
    Non-volatile content
    1644 • Higher catalytic activity than many other promoters
    A-5 to Z ASTM D • Contributes to a reduction in gel-time drift
    Viscosity
    2373
    1.01 - 1.06 g/cm³
    Specific gravity (25°C) ASTM D
    1963
    Density NA

    Applications
    • Coatings
    o Castings
    o Marble
    o Gel

    Dosage
    NA

    Storage
    Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from sources of ignition. Store in original
    container. Store in accordance with local regulations. Keep away from food, drink and animal feed stuffs. Keep at
    temperatures between 5 °C and 30 °C.

    Safety
    Please refer to our safety data sheet for information relating to product safety.

    811 Sharon Drive / Westlake, OH 44145 / Telephone: +1 800-321-9696 / 440-899-2950 / Fax: +1 440-808-7114 / Internet: www.borchers.com /
    E-Mail: [email protected]

    Our product information is given in good faith but without warranty. This also applies where proprietary rights of third parties are involved. This information does
    not release the customer from the obligation to test our products as to their suitability for the intended processes and uses. The application, use, and processing of
    our products and the products manufactured by the customer based on our technical advice are beyond our control and, therefore, entirely the customer's own
    responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.

    You might also like