HiTEC-544 PDS 1 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

HYDRAULIC

HiTEC® 544
Anti-Wear Hydraulic Additive Package

Mainstream Zinc-free Anti-Wear Hydraulic Additive Package


HYDRAULIC

HiTEC® 544 Anti-Wear Hydraulic Additive Package


Mainstream Zinc-free Anti-Wear Hydraulic Additive Package

Key Performance Benefits HiTEC® 544 Water Separation


HiTEC® 544 has been designed to provide superior performance over D1401 Demulse Test
35.00
traditional hydraulic additive systems in severe duty and high-load DIN 51524-2 Maximum Limit 30 minutes
applications. It increases the life of the hydraulic fluid whilst enabling 30.00
operators to reduce the environmental impact of their operations. 25.00

Time to 37 ml water (mins)


HiTEC® 544 delivers performance benefits in a number of key areas: 20.00

- Excellent oxidation stability 15.00


Capability to extend the oil drain interval resulting in reduced 10.00
disposal costs. Potential to improve efficiency during the length
5.00
of the oil drain due to decrease in deposits
0
- Good sludge and particulate control HiTEC® 544 HiTEC® 543 Competitor A Competitor B
Improved protection of critical components with tight tolerances,
such as servo-valves and pumps Performance Profile
- Exceptional wear protection
Delivering maximised equipment life and reduced maintenance Correctly formulated mono- and multi-grade hydraulic fluids using
costs HiTEC® 544 are capable of meeting the following specifications:
- Excellent separation from water • Parker HF-0, HF-1 and HF-2
Water contamination rapidly separated and maintained during • Bosch Rexroth RDE 90235
service • Eaton E-FDGN-TB002-E
- Effective foam control in most base oil combinations • Fives P68, P69, P70
Additive package includes antifoam, precludes the need to • DIN 51524
purchase a separate foam inhibitor • ISO 11158
• ASTM D6158
Recommended Dosage • SAE MS 1004
• GM LS-2
The standard treat rate for HiTEC® 544 is 0.82 % wt. It has been • AIST 127
extensively tested in a range of Group I and II base stocks. HiTEC® 544 has • Conestoga pump test ISO 20763
demonstrated compatibility with calcium and zinc-containing hydraulic
fluids. A small number of systems may require draining or flushing prior
to first use. Please contact your Afton Chemical representative for specific Handling Information
recommendations.
Recommended Handling and Storage Temperature:
Short Term: up to 55°C
Typical Characteristics Long Term: Ambient
Appearance: Dark brown liquid Maximum blending and handling temperature: 80°C
Specific Gravity at 15.6/15.6°C: 0.983
Flash Point, °C (PMCC): 102 min.
Kinematic Viscosity at 40°C, cSt: 131

© 2018. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 09/18.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.

You might also like