Scribd Logo
Upload

Welcome to Scribd!

  • 83 views

    Stud Calculations C16 B3 Level

    Uploaded by

    RonakShah
    This document contains a calculation sheet for determining the shear transfer through bond stress and shear studs in a composite column. It provides dimensions and material properties for the steel and concrete sections. It then calculates the load distribution based on the relative rigidities of the steel and concrete. The nominal axial capacity of the column is also calculated. Finally, it verifies that the capacity of the shear studs and bond stress to transfer the load from the steel to the concrete section is sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Stud Calculations C16 B3 Level

    Uploaded by

    RonakShah
    83 views1 page
    This document contains a calculation sheet for determining the shear transfer through bond stress and shear studs in a composite column. It provides dimensions and material properties for the steel and concrete sections. It then calculates the load distribution based on the relative rigidities of the steel and concrete. The nominal axial capacity of the column is also calculated. Finally, it verifies that the capacity of the shear studs and bond stress to transfer the load from the steel to the concrete section is sufficient.

    Original Title

    Stud Calculations C16 B3 level

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains a calculation sheet for determining the shear transfer through bond stress and shear studs in a composite column. It provides dimensions and material properties for the steel and concrete sections. It then calculates the load distribution based on the relative rigidities of the steel and concrete. The nominal axial capacity of the column is also calculated. Finally, it verifies that the capacity of the shear studs and bond stress to transfer the load from the steel to the concrete section is sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    83 views1 page

    Stud Calculations C16 B3 Level

    Uploaded by

    RonakShah
    This document contains a calculation sheet for determining the shear transfer through bond stress and shear studs in a composite column. It provides dimensions and material properties for the steel and concrete sections. It then calculates the load distribution based on the relative rigidities of the steel and concrete. The nominal axial capacity of the column is also calculated. Finally, it verifies that the capacity of the shear studs and bond stress to transfer the load from the steel to the concrete section is sufficient.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    CALCULATION SHEET

    Designed By: NR JOB No: C110


    Checked: SVD Contract:
    Conn.No: Rev: R0
    Date: Code: Euro

    Calculation for shear transfer through bond stress and shear studs
    Length of Composite column = 1200
    Breadth of Composite column = 900 mm
    Top Flange Width (B) = 600 mm
    Top Flange Thickneess (tf) = 50 mm
    Web Depth (h) = 600 mm
    Web Thickness (tw) = 30 mm
    Bottom Flange Width (B) = 600 mm
    Bottom Flange Thickneess (tf) = 50 mm
    Height of the column H = 3400 mm
    Modulus of elasticity of steel E = 210000 N/mm2
    Yield stress Fy = 450 N/mm2
    Charactristic concrete strength Fc = 60 N/mm2
    Elasticity of concrete Ec = 4700*sqrt(Fc') Ec = 32562.56
    Introduction length Lint = 1800 mm
    Shear stud dia hd = 19 mm
    Ultimate stress of studs Fu = 450.00 N/mm2
    No. of shear studs per section n = 6 No.
    Spacing of studs along member length s = 300 mm
    Bond stress Tbd = 0.3 N/mm2 Eurocode 4
    Rebar Dia = 25
    Rebar No = 24
    Total Axial Load transfered at floor level = 2182 C7 at 3rd

    Force distributed based on Rigidity


    P=Psteel+Prcc
    Steel Section Rigidity EsAs = 16380000000 N
    Concrete Rigidity 0.6EcAc = 26102144234 N
    Rebar Rigidity ErAr = 2474010000 N
    Total Rigidity (EA)eff = 44956154234 N

    Load on Steel Ps = 795.0226306 Kn


    Load on RCC Pc = 1386.977369 Kn

    Nominal Axial Comp strength Po = 92092500 Kn As*Fy + Asr*Fyr + 0.85*Ac*Fc


    Shear Force to be transfred Vr = -36.62164013 Kn

    Transfer of Force to RCC

    Introduction length Lint = 1800 mm


    Force transferred though bond Fb = 2019.6 Kn
    Capacity of 1 stud Qn = 81.60 Kn Euro 4
    No of studs in Introduction length n = 36
    Force transferred though studs Fs = 2937.6 Kn
    Force(Bond+Studs)>Force(Transfer from steel to concrete) Fs+Fb>Pc+Vr
    Total capacity of Studs and Bond is greater than load to be transferred

    You might also like