W32 Pin PDF
W32 Pin PDF
W32 Pin PDF
INSTRUCTION
Services, Wärtsilä Finland Oy
Engine section Engine type Ref. Date Issue Document No. Page
11 Crank mechanism See below WFI–S 30-Mar-2012 02 3211Q057 1(2)
Gudgeon pin
Engine type This bulletin concerns WÄRTSILÄ® Vasa 32, 32LN, WÄRTSILÄ® 32, 32GD,
32LNGD, 32DF, 34SG and 34DF engines.
General The piston gudgeon pin is sealed in both ends with a shrink-fitted steel plug.
If the plug for some reason moves outwards or inwards, it may disturb the
lubricating oil flow to the piston.
Recommendation At every piston overhaul, check (using e.g. a steel ruler or straight edge)
that the plug is flush with the end of the gudgeon pin as shown in the
illustrations below.
The tolerance for the plug position is +0,1 mm (outwards) and
-0,3 mm (inwards).
Note! If the plug has moved, the gudgeon pin must be replaced. Do not attempt to
re-position the plug.
Inspection 1. Gudgeon pin diameter 135 mm:
Note! Flush with the 1 mm recess.
Wärtsilä Finland Oy P.O. Box 252 (Tarhaajantie 2) Telecop. +358 10 709 1847 Tel. +358 10 709 0000 Business ID 0773744-3
Services, Vaasa FIN-65101 Vaasa, Finland Telecop. +358 10 709 1380 Registered Office: Vaasa
Wärtsilä Finland Oy P.O. Box 50 (Stålarminkatu 45) Telecop. +358 10 709 3279 Tel. +358 10 709 0000
Services, Turku FIN-20811 Turku, Finland Telecop. +358 10 709 3410
Services, Wärtsilä Finland Oy Operating Instruction
Issue Document No. Page
02 3211Q057 2(2)