Scribd Logo
Upload

Welcome to Scribd!

  • 187 views

    CE Mark and DoP - QHPS

    Uploaded by

    Hoang
    1. This document is an FPC certificate and declaration of performance for steel structure components produced by QH Plus Steel Company for use in the XXX project. 2. The steel components meet EN 1090-1 standards with a tolerance class of 2. They are manufactured from S275JR steel with a fracture toughness over 27J at 20°C. 3. Surface preparation and painting are done according to EN ISO 8501-1:2007 and component specifications. Manufacturing follows EN 1090-2 with execution class EXC3.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    CE Mark and DoP - QHPS

    Uploaded by

    Hoang
    187 views2 pages
    1. This document is an FPC certificate and declaration of performance for steel structure components produced by QH Plus Steel Company for use in the XXX project. 2. The steel components meet EN 1090-1 standards with a tolerance class of 2. They are manufactured from S275JR steel with a fracture toughness over 27J at 20°C. 3. Surface preparation and painting are done according to EN ISO 8501-1:2007 and component specifications. Manufacturing follows EN 1090-2 with execution class EXC3.

    Original Description:

    CE mark template

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document is an FPC certificate and declaration of performance for steel structure components produced by QH Plus Steel Company for use in the XXX project. 2. The steel components meet EN 1090-1 standards with a tolerance class of 2. They are manufactured from S275JR steel with a fracture toughness over 27J at 20°C. 3. Surface preparation and painting are done according to EN ISO 8501-1:2007 and component specifications. Manufacturing follows EN 1090-2 with execution class EXC3.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    187 views2 pages

    CE Mark and DoP - QHPS

    Uploaded by

    Hoang
    1. This document is an FPC certificate and declaration of performance for steel structure components produced by QH Plus Steel Company for use in the XXX project. 2. The steel components meet EN 1090-1 standards with a tolerance class of 2. They are manufactured from S275JR steel with a fracture toughness over 27J at 20°C. 3. Surface preparation and painting are done according to EN ISO 8501-1:2007 and component specifications. Manufacturing follows EN 1090-2 with execution class EXC3.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 2

    QN-QUA-SM02-FM08, R.

    00, 21-May-2018

    XXX

    QH PLUS STEEL COMPANY LIMITED


    Head Office: XXX
    Plant: XXX

    20

    FPC Certificate Number: XXX

    EN 1090-1
    Steel Structure for XXX Project used in xxx

    Tolerances on geometrical data: EN 1090-2:2008+A1:2011 Tolerance Class 2.

    Weldability: S275JR EN 10025-2:2004

    Fracture toughness: ≥27J @ 20oC

    Load bearing capacity NDP

    Release of cadmium: NDP

    NDP
    Emission of radioactivity:
    Surface preparation according to EN ISO 8501-1:2007
    Durability preparation grade P2. Surface painted according to
    component specification

    Design: Provide by Purchaser

    According to component specification of xxx EN 1090-


    Manufacturing:
    2, execution class EXC3.
    QN-QUA-SM02-FM09, R.00, 21-May-2018

    DECLARATION OF PERFORMANCE
    Reference number: xxx

    Type xxx
    Structural steel components intended for use in xxx project at xxx where components can be made
    from Hot rolled, Cold rolled sections / profiles in various shapes and sizes, flat plates, bars, castings
    and forgings made of steel components. Made in accordance with the Harmonised Technical
    Intended use Specification listed, in various grades of materials and durable coatings as indicated in the table below.

    Qh Plus Steel Structure Company Limited


    Head Office: xxx
    Plant: xxx
    Manufacturer

    AVCP system xxx


    Bureau Veritas
    Notified Body xxx

    N.B. Number xxx

    Bureau Veritas has performed (i) initial inspection of the manufacturing plant and factory product control and (ii)
    continuous surveillance, assessment and evaluation of factory production control under system 2+ and issued Factory
    Control Certificate xxx and Welding Certificate xxx.

    Declared Performance
    Harmonised technical
    Essential requirement Performance
    specification
    Tolerances on geometrical
    EN 1090-2:2008+A1:2011 Tolerance Class 2.
    data
    Weldability EN 10025-2:2004
    Grades S275JR
    Fracture toughness ≥27J @ 20oC
    Dangerous substances NDP
    Resistance to fire NDP
    Reaction to fire Class A1 (steel only)
    Release of cadmium
    NDP
    and its compounds EN 1090-2 : 2008
    Radioactivity NDP +A1:2011

    Surface preparation according to EN ISO 8501-1:2007


    Durability preparation grade P2. Surface painted according to component
    specification
    Design Provide by Purchaser
    Load bearing capacity NDP
    Fatigue strength NDP
    According to component specification of xxx EN 1090-2,
    Manufacturing execution class EXC3.

    The performance of the product identified above is in conformity with the declared performance identified in this table.
    These characteristics should be interpreted in accordance with the contract specification.
    This Declaration of Performance is issued under the sole responsibility of Qh Plus Steel Company Limited

    (name and function) NGUYEN VAN HOANG QA/QC Manager

    (issue place and date) (signature)

    You might also like