Scribd
Upload
66 views1 page

Assignment 8 HND 2 Transfer Operations II 2020 Question One

This document contains instructions for Assignment 8 in the Transfer Operations II course. It lists two questions to answer regarding boiling water on a steel heater and condensing steam on a vertical plate. Students must determine the maximum heat flux during nucleate boiling on the steel heater and the surface temperature. They also must calculate the rate of heat transfer during steam condensation on the vertical plate maintained at 90°C, as well as the rate at which condensate drips off the bottom of the plate. The assignment is due on July 26, 2020 at 5 p.m. and can be submitted either handwritten or as a Word document via the school's online system.

Uploaded by

Maame Efua Neizer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

Assignment 8 HND 2 Transfer Operations II 2020 Question One

This document contains instructions for Assignment 8 in the Transfer Operations II course. It lists two questions to answer regarding boiling water on a steel heater and condensing steam on a vertical plate. Students must determine the maximum heat flux during nucleate boiling on the steel heater and the surface temperature. They also must calculate the rate of heat transfer during steam condensation on the vertical plate maintained at 90°C, as well as the rate at which condensate drips off the bottom of the plate. The assignment is due on July 26, 2020 at 5 p.m. and can be submitted either handwritten or as a Word document via the school's online system.

Uploaded by

Maame Efua Neizer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Assignment 8 HND 2 Transfer Operations II

2020
Question One
Water is to be boiled at atmospheric pressure on a 3-cm-diameter mechanically polished steel
heater. Determine the maximum heat flux that can be attained in the nucleate boiling regime and
the surface temperature of the heater surface in that case.

Question Two
Saturated steam at 1 atm condenses on a 3-m-high and 5-m-wide vertical plate that is maintained
at 90°C by circulating cooling water through the other side. Determine (a) the rate
of heat transfer by condensation to the plate, and (b) the rate at which the condensate drips off
the plate at the bottom.

Submission date and time: Sunday, 26th July, 2020, 5 p.m.


Format: hand written or word doc
Electronic means: via vclasskstu.edu.gh

You might also like