Introductory Course: Load Flow

and Short Circuit Calculation

S2020.0831.ONLINE

August 31st - September 02nd 2020

Online training course

This training gives the participants an introduction WHO SHOULD ATTEND:

to the handling and basic calculation functions
of PowerFactory. The course is intended for

It begins with the introduction of the handling

• Utility engineers
and the basics for modelling a network.
Afterwards a load flow calculation is executed • Power system operators
to analyse the network. Occurring voltage prob- • Project Developers
lems will be eliminated by implementing different
control strategies. • Manufacturers
• Consultants and electrical engineers
With the short-circuit current calculation according
to IEC60909, typical 3-pole and 1-pole faults Whilst no experience with the program is
at different fault locations are simulated. Thereby, required, it is assumed that the participant is
the short-circuit rating of the equipment as well familiar with the network modelling fundamentals
as different earthing concepts are evaluated.
The introduction of the tools for network planning and power system analysis methods.
and network operation serves as a further train-
ing content. With these tools it is possible to plan
future expansion scenarios and to perform calcu- PRICE PER PARTICIPANT:
lations on the same network for different operating
cases. • 1,480.00€* (with valid maintenance contract)
• 1,680.00€* (without valid maintenance contract)
The training ends with additional information • 504.00€* (with valid student identification)
on the base package and some tips & tricks
for working with PowerFactory. *Prices are exclusive of VAT

Training schedule
Central European Time (UTC +01:00)

DAY 1

9:00 Introduction to PowerFactory

Introduction to the PowerFactory structure and data model, graphical user interface, diagrams, users, libraries
and power equipment modelling. Creating projects and grids, defining elements and types. Single line and geo
graphical diagrams, detailed substation diagrams.

10:30 Coffee break

11:00 Exercise: Creation of a Network Model

Development of a high voltage network. Modelling of busbars, cables and overhead lines, transformers,
generators and loads. Working with the graphical user interface, Data Manager and Network Model Manager.
Single line diagram and detailed substation layout diagrams.

12:30 Lunch break

13:30 Load Flow Analysis
Theoretical introduction to the Load flow calculation methods and settings. Results analysis and reporting. Result
colouring in the single line diagram.

14:00 Exercise: Load Flow Analysis Part I

Executing a load flow calculation and analysing the results. Results are analysed in the single line diagram,
results tables and reports. Evaluation of overloading and voltage violations.

15:00 Coffee break

15:30 Exercise: Load Flow Analysis Part II

Advanced load flow calculation settings. Reactive power and voltage control using synchronous generators an
tap changing transformers. Reactive power limits of generators.

17:00 End of the first day

DAY 2

9:00 Exercise: Network Enhancement

Expansion of an existing medium voltage network in an separate grid. Data management and diagrams for
multiple grids. Defining templates.

10:30 Coffee break

11:00 Short Circuit Analysis

Explanation and comparison of the different short circuit current calculation methods. Presentation of the
application areas of short-circuit analysis for different processes such as cable dimensioning, equipment
dimensioning, etc.

12:30 Lunch break

13:30 Exercise: Short Circuit Analysis Part I

Three-phase short circuit calculation at various locations in the network according to IEC 60909. Evaluation of
thermal and mechanical stresses with regard to the network components such as cables and busbars.
Dimensioning of a circuit-breaker.

15:00 Coffee break

15:30 Exercise: Short Circuit Analysis Part II

Execution of single-phase faults in the mediumvoltage network. Neutral point handling at the transformer and
investigation of different earthing concepts.

16:30 Exercise: Short Circuit Analysis Part III

Short circuit analysis using the complete method and calculation of multiple faults. Optional exercise on dynamic
voltage support.

17:00 End of the second day

DAY 3

9:00 Exercise: Connection of Grids

Grouping of networks in different grids and diagrams, e.g. according to voltage level or regional subsystems.
Connection of different grids or subsystems topologically and graphically.

9:30 Grid Expansion and Operational Planning

Data management including Grids, Variations and Expansion Stages for grid expansion planning. Usage of
Operation Scenarios to consider different operating conditions and Study Cases for analysing the network.

10:30 Coffee break

11:00 Exercise: Grid Expansion Planning

Grid expansion planning using Variation and Expansion Stages on the basis of the basic network. Defining time
dependent network changes in variations and expansion stages. Comparison of network variations.

12:30 Lunch break

13:30 Exercise: Operation Planning

Defining Operation Scenarios in PowerFactory for various load and generation conditions and switching states in
the grid.

14:00 Exercise: Network Analysis

Analysis of the network with the help of the defined operation scenarios at different points in time in the previously
prepared network expansion planning. Use of study cases to combine active operation scenarios, variations and
grids for a convenient analysis of different possible scenarios.

15:00 Coffee break

15:30 Exercise: Feeders

Defining feeders. Feeder load flow analysis using Load Scaling and Voltage Profile Diagrams.

16:00 Exercise: Load Scaling

Extended network analysis. Use of feeder load scaling to be able to represent operating states based on real
measurements.

16:30 Additional Information

Additional information on the base package. Tips & Tricks for working with PowerFactory.

17:00 End of the course

DIgSILENT GmbH T +49 7072 9186-0

Heinrich-Hertz-Str. 9 F +49 7072 9168-88
72810 Gomaringen [email protected]
Germany
www.digsilent.de