Scribd
Upload
906 views2 pages

Description Wiring Diagram: Parking Brake Switch Circuit

This document provides troubleshooting steps for issues with the parking brake switch circuit in 2014-2016 Toyota IS200T, IS250, IS300, and IS350 vehicles. The circuit connects the parking brake switch assembly to the radio receiver assembly. The procedure involves checking that the brake warning light operates correctly when the parking brake is engaged and released, and measuring resistance values between connectors to check for faults in the harness or connectors.

Uploaded by

Jack Cardiag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
906 views2 pages

Description Wiring Diagram: Parking Brake Switch Circuit

This document provides troubleshooting steps for issues with the parking brake switch circuit in 2014-2016 Toyota IS200T, IS250, IS300, and IS350 vehicles. The circuit connects the parking brake switch assembly to the radio receiver assembly. The procedure involves checking that the brake warning light operates correctly when the parking brake is engaged and released, and measuring resistance values between connectors to check for faults in the harness or connectors.

Uploaded by

Jack Cardiag
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Parking Brake Switch Circuit; 2014 ­ 2016 MY IS200T IS250 IS300 IS350 [04/2013 ­        ]

Last Modified: 03­03­2017 6.7:8.0.40 Doc ID: RM1000000005VNA


Model Year Start: 2014 Model: IS200T Prod Date Range: [04/2013 ­           ]

Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Parking Brake Switch Circuit; 2014 ­ 2016 MY IS200T IS250
IS300 IS350 [04/2013 ­        ]

Parking Brake Switch Circuit

DESCRIPTION
This circuit is from the parking brake switch assembly to the radio receiver assembly.

WIRING DIAGRAM

PROCEDURE

1. CHECK BRAKE WARNING LIGHT

(a) Check that the brake warning light comes on when the parking brake is applied and goes off when it
is released.
OK:
The brake warning light operates as specified above.

GO TO BRAKE CONTROL / DYNAMIC CONTROL
NG SYSTEMS

OK

2. CHECK HARNESS AND CONNECTOR (PARKING BRAKE SWITCH ASSEMBLY ­ RADIO
https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 1/2
3/6/2017 AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Parking Brake Switch Circuit; 2014 ­ 2016 MY IS200T IS250 IS300 IS350 [04/2013 ­        ]

RECEIVER ASSEMBLY)

(a) Disconnect the K72 radio receiver assembly connector.

(b) Disconnect the A51 parking brake switch assembly connector.

(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:

TESTER CONNECTION CONDITION SPECIFIED CONDITION

K72­15 (PKB) ­ A51­1 Always Below 1 Ω

K72­15 (PKB) ­ Body ground Always 10 kΩ or higher

PROCEED TO NEXT SUSPECTED AREA SHOWN IN
OK
PROBLEM SYMPTOMS TABLE 

NG REPAIR OR REPLACE HARNESS OR CONNECTOR

https://techinfo.toyota.com/t3Portal/resources/jsp/siviewer/index.jsp?dir=rm/RM30G0U&locale=en&User=false&publicationNumber=RM30G0U&objType=toc/… 2/2

You might also like