See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/325794468

Carbon Footprint on Denim Manufacturing

Chapter · June 2018

DOI: 10.1007/978-3-319-68255-6_112

CITATIONS READS

2 4,785

2 authors, including:

Gopalakrishnan Duraisamy
PSG College of Technology
33 PUBLICATIONS   82 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Kinetic behavior of Photochromic textile materials View project

Application of geopolymer composites as fire barier, AGK View project

All content following this page was uploaded by Gopalakrishnan Duraisamy on 20 August 2018.

The user has requested enhancement of the downloaded file.

Carbon Footprint on Denim Manufacturing

Aravin Prince Periyasamy and Gopalakrishnan Duraisamy

Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Concept of the Carbon Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Evaluation of the Carbon Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Life Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Raw Material Procurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Coloration of Denim and Fabric Formation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Garmenting and Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Consumer Use and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Calculating the Carbon Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Functional Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
System Boundaries for the Carbon Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Production Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Climate Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Interpretation and Conclusion of Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Challenges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Conclusion and Further Outlook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Abstract
Carbon footprint, also called carbon profile, defines the overall amount of carbon
dioxide and other greenhouse gas (GHG) emissions associated with a product
throughout the entire supply chain, from raw materials to end-of-life recovery and

A. P. Periyasamy (*)
Departmental of Material Engineering, Faculty of Textile Engineering, Technical University
Liberec, Liberec, Czech Republic
G. Duraisamy
Department of Fashion Technology, PSG College of Technology, Coimbatore, Tamilnadu, India
e-mail: [email protected]

# Springer International Publishing AG 2018 1

L. M. T. Martínez et al. (eds.), Handbook of Ecomaterials,
https://doi.org/10.1007/978-3-319-48281-1_112-1
2 A. P. Periyasamy and G. Duraisamy

disposal. Electricity production in power plants, heating with fossil fuels, trans-
port operations, other industrial and agricultural processes, among others, cause
these emissions. Indicators such as the global warming potential (GWP) are used
to quantify the carbon footprint. As defined by the Intergovernmental Panel on
Climate Change, GWP is an indicator that reflects the relative effect of a GHG in
terms of climate change considering a fixed time period, such as 100 years
(GWP100). The GWP for different emissions can then be added together to
give a single indicator that expresses the overall contribution of these emissions
to climate change. Denim garments are the most popular clothing worldwide;
many countries are taking measures to reduce carbon emissions through the use
of organic cotton, environmentally friendly methods of manufacturing, and
optimized denim manufacturing. Carbon credits have been adopted by denim
manufacturers; this helps them to achieve overall goals of carbon emissions. This
chapter explains the concept of carbon footprint in denim manufacturing and
describes case studies, difficulties facing the industry, and optimized denim
manufacturing techniques that reduce the carbon footprint.

Keywords
Carbon footprint · Carbon credit · Denim manufacturing · Environmental
impacts · Global warming potential · Sustainability

Introduction

Carbon footprint is the total greenhouse gas (GHG) emissions caused directly or
indirectly by an individual or organization during production of products [1]. It is
mostly expressed as a carbon dioxide (CO2) equivalent or tons of CO2 [2]. When
driving a car, the engine burns fuel, which creates a certain amount of CO2; that
amount depends on fuel consumption and distance travelled. Using heat to boil oil or
using electricity, gas, or coal generates CO2. The production of foods and goods also
emits some quantities of CO2. The carbon footprint is the sum of all CO2 emissions
induced by the activities in each time frame. CO2 is calculated based on fuel
consumption. The next is to add the CO2 emission to the carbon footprint. Other
greenhouse gases (GHGs) such as methane might be emitted and ozone can be
depleted because of human activities. Other GHGs are also taken into account in the
carbon footprint. They are converted to an amount of CO2 and referred to as
equivalent CO2—an amount that would cause the same effects on global warming.
During the Industrial Revolution, textile manufacturers were neither conscious of
nor bothered by the effects of textile production on the environment, and so they
disposed of chemicals into nearby rivers and water bodies. As a result, environmen-
talism and social consciousness emerged. As a starting point, consumers started to
think of new ways to dispose of, recycle, and reuse clothes. Consumers became
aware of how clothing is produced and in turn of the impact of the process on the
environment, which paved the way to a meticulous lifestyle. Companies reacted to
this lifestyle by providing eco-labels to inform consumers that they care and are
Carbon Footprint on Denim Manufacturing 3

concerned with sustainability. Over the past decade, environmental issues

(e.g., global warming) have been spotlighted by global society, which has an impact
on other aspects of manufacturing, too. Henceforth, manufacturers enlarged produc-
tion of sustainable products rather than disposable ones. This chapter assesses the
life cycle of denim jeans, as we know that denim is a noteworthy part of the fashion
industry because of its popularity. According to a report from Cotton Inc., U.S.
consumers generally own seven pairs of denim at one time [3]. Life cycle assessment
is a detailed analysis of a product that elaborates the entire lifespan of a product, from
fibers to retail. Consequently, this encompasses the production of raw materials and,
in the case of denim, the development process for denim garments, logistics, their
use; it ends with denim’s reuse, recycling, and disposal. Depending on consumer
behavior, a product’s use phase and end-of-life disposal phase—critical stages in a
product’s life cycle—are modified. The environment affects each stage of the
manufacturing phase of denim, such as energy and water usage, CO2 emissions,
and waste [4, 5].

Concept of the Carbon Footprint

The concept of the carbon footprint revolves around transportation and heating
issues. The fabric gives off a large amount of CO2 and other “footprint content.”
Regarding U.S. Energy Information Administration, the textile industry is the fifth
largest contributor to the carbon footprint content within many countries [6]. The
textile industry is large and it produces many GHGs. Textile production is estimated
to produce around 60 billion kg of fabric. The amount of energy and water needed to
produce a boggle of fabric includes 1074 billion kWh of electricity or 132 million
metric tons of coal and 6–9 trillion L of water. Textiles, including clothing,
accounted for nearly 19.8 tons of total CO2 emissions. Therefore it is necessary to
study how to estimate the carbon footprint of a fabric—in this case, to consider the
“embodied energy” of the fabric—because that gives an idea about the energy
consumption during each process. To estimate the embodied energy, it is important
to know the type of fibers used to make the fabric, because that gives an idea about
the energy required to manufacture the fibers and yarn. In general, the carbon
footprint varies a lot for different types of fibers, so the energy required to produce
them also varies. Next, we have to determine the energy required to spin the yarn into
a fabric, because once a fiber has been converted to filament, the amount of energy
needed to convert the filament into a fabric is consistent. Many factors must be
considered for natural fibers: preparation of the field in which the plant was grown,
weed control, pesticide use, and harvesting method; these are major factors in
determining cost. Just 1 ton of nitrogen fertilizer emits about 7 tons of CO2.
Synthetic fibers are mainly made from fossil fuels, and a very large amount of an
energy is needed to take oil from the ground; the energy needed to create synthetic
fiber is much higher than that needed to create natural fiber [6–8]. However, denim is
made from many textile fibers—namely, cotton, polyester, lyocell, and polyurethane.
Choosing natural fibers has two major benefits:
4 A. P. Periyasamy and G. Duraisamy

• They can be easily degraded by microorganism and by other attacks, so the CO2
content will be released, whereas man-made fibers do not easily release content;
instead, they release some heavy metals, recycling them requires a high cost, and
an estimated 3 tons of CO2 emissions produce 1 ton of material to be burned.
• Sequestering carbons is the process by which CO2 in the upper atmosphere is
absorbed by plants on the Earth and is stored as carbon in biomass. For example,
jute absorbs 2.8 tons of carbon/year.

Substituting organic fibers for conventionally grown fibers is little better because
it only uses less energy for production, has fewer costs, and emits a slightly smaller
amount of CO2 gas. A study found that natural fibers emit 43% less GHG than the
conventionally grown fibers, and organic fibers use 63% of energy used for farming,
which is much less than that used for farming conventional fibers. Another study also
stated that in long-term controlled trials, organic farming gave about 100–400 tons of
carbon/year; this helps to reduce GHGs present in the environment [13]. The main
thing lies in handling the organic matter; organic matter in soil is based on carbon,
and increasing the amount of organic matter directly relates to carbon sequestration.
Organic farming also helps to reduce environmental impacts and enhance social
responsibility. Organic farming can eliminate the use of synthetic fertilizers and
pesticides, which cause series problems, and can save larges amounts of water,
which can be used instead for irrigation. It also ensures a safe mode of living.
Organic agriculture is being closely examined; studies found that it is a climate
change tool that can be used to fight against global warming. The energy required to
weave different types of fiber into fabric is same, since the processing method is
same for nylon, wool, cotton, and polyester [6, 7].

Evaluation of the Carbon Footprint

A significant phase in determining the denim life cycle (see Fig. 1) is GHG emission;
laundering and drying are the main determinants the life cycle of a garment.
Maximal energy is required to wash, dry, and iron denim garments. Throughout
the total life cycle, laundry accounts for 40–50% of GHG emissions due to energy
inputs. Machine drying is among the highest energy users producing GHG emis-
sions. The use of renewable or nuclear power for laundering reduces GHG emissions
in a garment’s life cycle. Hand-washing and dry cleaning require very little energy
and therefore result in few GHG emissions. GHG emissions can change according to
the region and the customer’s behavior. Studies of denim garments reveal that
laundry is done more frequently than is necessary, which increases total GHG
emissions [6, 9, 10].
Carbon Footprint on Denim Manufacturing 5

Fig. 1 Phases of a denim life cycle (reprinted from Periyasamy et al. [6] with the kind permission
of Elsevier Publication)

Product Life Cycle

Raw Material Procurement

Cotton is the main raw material for denim [11]. At times, synthetic materials are used
to regulate additional properties such as comfortable fit and durability. One of the
most accepted natural fibers used worldwide is cotton. A total of 3% of cultivated
land is used to produce cotton. According to a previous study, natural fibers are
environmental friendly, unlike synthetic fibers [12]. Each fiber is different, with its
own sustainability challenges in the production process that cannot be disregarded.
In general, cotton is a natural fiber that is grown, not manufactured (see Fig. 2).
Pesticides and fertilizers are required to achieve the expected quality of cotton,
therefore, even though it is environmentally friendly, it also consumes a large
quantity of water [13].
6 A. P. Periyasamy and G. Duraisamy

Fig. 2 Life cycle analysis studies of denim made with natural fibers.

Fig. 3 Life cycle analysis studies of denim made with synthetic fibers

Based on a data sheet published by the U.S. Department of Agriculture and the
Organic Consumers Association; cotton is the most toxic crop in the world. Cotton
uses more than 25% of all the insecticides and 12% of all the pesticides applied
worldwide [14, 15]. The majority of these insecticides are considered to be the most
toxic chemicals in the world. A total of 7–29 tons of water are required to produce
1 kg of raw cotton [16–18]. It also contributes to global warming potential (GWP),
not only with CO2 but also other gases such as N2O and CH4. GWP for cotton
cultivation is 53% of CO2, 45% of N2O, and 2% of CH4 [19]. Because of the
aforementioned environmental and health issues, most denim brands are committing
to using organic cotton materials [20, 21]. As for synthetic materials, polyester and
polyurethane are the most used in denim manufacturing. Although the manufactur-
ing of these fibers requires less water and land, it has other effects on the environ-
ment. In general, synthetic polymers are obtained from nonrenewable resources (e.
g., fossil fuels), and the production of these fibers requires an enormous amount of
energy, causing higher GHG emissions (see Fig. 3). Environmental problems in
waste management, such as nonbiodegradability, pose various health and toxicolog-
ical threats that are also negative impacts of the production of synthetic fibers [22].

Manufacturing

Manufacturing is the process whereby textile fibers are converted into yarn, then into
the fabric, and finally into garments (three-dimensional structures). Figure 4 shows a
Carbon Footprint on Denim Manufacturing 7

Fig. 4 Production life cycle for denim (Reprinted from Periyasamy et al. [6] with the kind
permission of Elsevier Publication)
8 A. P. Periyasamy and G. Duraisamy

100

Ring yarn
80
GHG emission during yarn formation (%)

60

40

30 29

20
12
9
7 6
4 3
0

AF
g
P

g
ng

ng

om
ng

in
in
SS

di
ni

ov

w
ro
di

ar
in

ra
in

R
sp

D
W

o
Bl
g
in
R

Fig. 5 Greenhouse gas emissions during ring yarn manufacturing. SSP supplementary spinning
processes, AF administrative facilities

map of each process, which is explained in relation to denim manufacturing with

respect to the inputs and outputs (emission of waste) of the production chain for a
product’s life cycle.

Spinning

In general, different process (e.g., opening, carding, combing, drawing, roving, spin-
ning, and winding) are carried out using cotton and other fibers to form a yarn,
requiring a large amount of energy [22, 23]. The results of the study conducted by
us of GHG emissions with respect to yarn manufacturing from blowroom to yarn
winding from the spinning industry in Coimbatore, India, are shown in Figs. 5 and 6.
Among the process, ring spinning machine, rotor spinning machine and winding
machine consume the largest energy, which is nothing but largest GHG emission
process/machines.

Coloration of Denim and Fabric Formation

Denim fabrics have twill structures obtained through a weaving process (see Fig. 7).
Whenever the process of warping is completed, the warp sheets must undergo a
Carbon Footprint on Denim Manufacturing 9

100 Rotor Yarn

80
GHG emission during yarn formation (%)

60

45
40

25
20
11
9
7
3
0
Rotor spinning SSP Carding Blowroom Drawing AF

Fig. 6 Greenhouse gas emissions during rotor formation. SSP supplementary spinning processes,
AF administrative facilities

Fig. 7 Typical denim

garments

sizing process; the sizing box contains natural or synthetic sizing agents such as
polyvinyl alcohol or carboxymethyl cellulose [24, 25]. The temperature is high
during the process of coloration. Hence, carbon is engendered during this process
through the generation of steam. A GHG emission study was conducted in the India-
based denim industry, and the results are plotted in Fig. 8, which shows the GHG
emissions during the weaving preparatory process. Among the various process in
10 A. P. Periyasamy and G. Duraisamy

100
GHG emission during weaving preparation (%)

80
70

60

40

20 19

5 4 2
0
ng

SP

ng

AF
es
zi

pi

oc
Si

ar

pr
W
d
an

ng
vi
g
in

ea
ye

w
D

e-
pr
er
th
O

Fig. 8 Greenhouse gas emissions from the weaving preparation department with respect to
different operations

this phase, dyeing and sizing supply 70%; supplementary process (air compression,
lighting) cause 19%; warping, 5%; and other preweaving processes such as drawing
in and denting, 4%. As far as denim fabrics are concerned, only the warp yarns are
dyed. The warp sheets of denim are generally colored with indigo and sulfur dyes.
The excess dye is removed only after washing it in water after dyeing, which causes
water pollution and wastewater. During indigo dyeing, sodium hydrosulfite is added
to reduce the indigo dyes is nothing but, this chemical reaction makes indigo to the
soluble form, therefore, it is possible to carry out the dyeing process [25–28]. The
reduced indigo dyes are normally yellow; it turns to blue when exposed to atmo-
spheric air as a result of oxidation [29]. Therefore the dyeing and sizing processes
require steam energy, which contributes 96% of GHG emissions of the total emis-
sions in this phase.
GHG emissions during the weaving process (for denim fabric) were studied in the
denim weaving industry located near Coimbatore, India. The results are plotted in
Fig. 9, showing that the weaving machines, air compressor, and air conditioners
contribute 85% of GHG emissions. However, the air compressor alone contributes
29% of GHG emissions; in general, compressed air is the heart of air-jet looms.
However, these emissions can be reduced to some extent by properly maintaining the
machines.
Carbon Footprint on Denim Manufacturing 11

100
GHG emission during weaving preparation (%)

80

60

40 36
29

20
20
11
4
0
s

g
g
n
so
ne

ti n
in
tio

an
es
hi

gh
di
ac

on
pr

le

Li
C
om
m

rC
ng

rC

Ai
vi

Ai
ea
W

Fig. 9 Greenhouse gas emissions during the weaving process

Garmenting and Washing

“Garment manufacturing,” also known as the cut-make-trim stage, is the final stage
in the denim supply chain. Various operations such as spreading, cutting, sewing,
heat pressing, ironing, and packaging are involved in this process. An important
aspect in the denim supply chain is the logistical activities during the production
stages, from raw materials to finished denim, which are usually situated in diverse
places and countries. Transportation of goods is not only involved in manufacturing;
when a product is completed it has to be sent to wholesalers, retailers, distribution
centers, and shops using different kinds of transportation (e.g., by road, ship, or air)
that all consume various amounts of energy and emit various levels of CO2. Freight
transport is estimated to produce 8% of CO2 emissions. In reference to LCA,
transportation is a massive factor in products reaching consumers, and it consumes
a huge amount of oil and gas, the prices of which increase progressively, thereby
increasing transport costs. Diminishing the amount and distance of transport of
goods has a significant effect; this is popularly known as “green logistics,” which
ensures the management of a green supply chain [30–33].
12 A. P. Periyasamy and G. Duraisamy

100
GHG emission during garmenting and washing (%)

80

60

40 38

27

20 17

5 4
2 2 2 2 1
0
g
g

g
g
ng

ng

ng

ng
ng

g
tin
in

in
tin
in
yi

gi
w

s
ni

di
si

ut

in
ck

Fu
dr

ca
Se

es

te

ea
pr
C

he

Pa

t
d

Pr

Bu

r
rn
an

Sp
C

te
&
ng

t
Pa
n
hi

tio
as

ec
W

sp
In

Fig. 10 Greenhouse gas emissions of the garmenting and further washing process

Based on the results from the garmenting process presented in Fig. 10, sewing,
washing, and pressing consume the largest amounts of energy, together contributing
about 82% of total GHG emissions. However, the washing/drying process includes
the compressor inputs, belly washing machine, steam generation, and administrative
facilities, whereas the sewing process includes illumination, compressors, and
administrative facilities.

Consumer Use and Disposal

Today, well-meaning people who truly want to protect the environment can be
passionate about what should be done with waste, which they may consider to be
a generic material. Use of the LCA process is geared toward the consumer and is no
longer within the manufacturer’s control (e.g., passing valued garments on to family,
friends, or charity; re-selling or recycling) and varies among and within regions and
cultures. This phase encourages consumers to buy only when needed and to take care
of clothes to prolong their lifespan. However, most denim clothing is washed in
water every 2 weeks and then disposed of in a landfill after 1 year. Most companies
put much emphasis on the care of denim. The main motto at the disposal stage—
ensuring recycling and donating in order to reduce the amount of waste going to
Carbon Footprint on Denim Manufacturing 13

landfills—helps to positively affect the environment. The most commonly known

waste management strategies are the 3 Rs: reduce, reuse, and recycle; these generally
save energy and money, reduce GHG emissions and global climate change, and,
most important, helps to sustain the environment for future generations. The mean-
ing of recycle is to collect and process materials that are considered trash and turn
them into new products. Recycling saves resources and uses less energy than does
the production of new items. A few companies have recently extracted fiber from old
denim (considered trash) for technical applications such as insulation for homes and
civic buildings [6].

Calculating the Carbon Footprint

To calculate the carbon footprint, several data have been considered, for example,
the type and origin of the fiber; fiber loss during ginning, spinning, and other
process; type of weave structure; weaving machines; sizing (add on a percentage);
type of dyes; depth of shade; desizing (percentage loss), marker efficiency during the
cutting process; sundry efficiency; chemicals used in and type of washing; weight of
the packaging material; and mode of transport with respect to the entire supply chain.

Functional Unit

The functional units are the items to be analyzed in a study. Therefore, for this study
the functional unit is the production of one pair of jeans with a medium stonewash,
weighing 570 g. The details of the functional units are listed in Table 1.

System Boundaries for the Carbon Footprint

The life cycle of denim jeans from the beginning to the end includes raw materials
extraction, fabric formation, coloration, garment manufacturing, transportation,
retailing, and distribution.

Production Phase

In the production process, the raw material (fiber) undergoes many processes during
the conversion to finished product. The number of processes during the production
phase affects the impact on the environment; more processes leads to a larger effect.
The different processes involved in making the final products are, for example, yarn
formation, fabric formation, coloration, garment manufacturing, and the finishing
process.
14 A. P. Periyasamy and G. Duraisamy

Table 1 Functional units for carbon footprint analysis

Functional unit Men’s bottom (36-inch waist)
Material 98% cotton, 2% Lycra
Raw material Cotton (from India)
Dye Indigo blue
Finishing Medium stone wash with 3-D finish
Weight of jeans 570 g (~ 20 oz)
Year of production 2015
LCA conducted 2016
Consumer phase India
ISO ISO 14040
ISO International Organization for Standardization, LCA life cycle analysis

Climate Change

One of the major concerns of twenty-first century is the change in climatic condi-
tions. The textile industry is a major polluting industry that has drawn attention to
changes in climatic conditions, which have resulted in global warming, increased sea
levels, and drastic weather conditions. Increases in the consumption of clothing (i.e.,
textiles) have greatly affected climate changes. Throughout the production of denim,
from the beginning to the finished product, a large amount of carbon is emitted,
which initiates climate change. These changes will affect human health and the
ecosystem, and they increase year by year. This study focuses on the GWP and
measures the emission of CO2 and other GHGs into the environment. GHG emission
is inevitable in textile production; as a result it increases the system temperature (i.e.,
ecosystem), causes health hazards to humans and animals, and damages the entire
ecosystem. Changes in climatic conditions with respect to the different phase of
denim production (expressed as kilograms and percentages) are shown in Fig. 11.
Consumers have the greatest impact on climate change; GHG emissions may
increase when consumers use warm water to wash clothes and use a dryer to dry
them; this affects climatic conditions. However, these can be reduced when clothes
are washed with cold water and the dryer is used less often. Therefore, increased CO2
emissions are due to factors such as washing with warm water, using a dryer,
washing weekly, and using a conventional washing machine.
In general, washing only after wearing 10 times is a suggestion to strongly reduce
carbon emissions. However, in order to heat the drum to dry jeans, the dryer must use
steam or gas, and a huge amount of energy is required for this purpose. This is
commonly known as the latent heat of vaporization. For example, wet jeans
weighing 2 kg after washing require 1.4 kWh of energy to dry [34–36].
Carbon Footprint on Denim Manufacturing 15

20
CO2 emission (kg) 20

15 14.4

10

6.1
5 4.64
3.2
2.1
1.44
0.96 0.64
0
r

e
n

sh

ng

e
ai
be

in

as
tio

ak

lif
et
ni

hi

ck
Fi

of
uc

Ph
M

Fi

R
as

Pa
od

d
&

nd
W

er

En
ut
pr

ta

m
C

su
ic

or
br

on
sp
Fa

C
an
Tr

Fig. 11 Climate changes with respect to the different phases of denim production. Fiber cultivation
to harvesting for cotton and chips for fiber for Lycra; fabric production spinning, sizing, dyeing, and
weaving

Interpretation and Conclusion of Results

The main focus of an environmental analysis is the LCA. As restrictive eco-stan-

dards are introduced more often, the carbon footprint could be one of the criteria
used to evaluate the environmental changes and caused by the global warming and
cooling potentials. The main aim of this chapter was to assess the carbon footprint of
any product, calculating the energy used to process them from yarn to garment. In
producing a pair of jeans, the fabric production and consumer care stages have the
largest impact on climatic conditions, because of the number of processes that use
resources. Water bodies create nutrient-rich runoff water, which is damaged by the
use of fertilizers and pesticides, which generally affects the oxygen content in the
water, which thereby affects aquatic systems.
16 A. P. Periyasamy and G. Duraisamy

Challenges

This study identifies hidden facts about the production of denim as they relate to the
carbon footprint and manufacturing. It drives choices to the consumer, who must
choose products based on their environmental impacts. However, this study can also
help to improve consumer awareness. The promotion of sustainable denim is a key
position of retailers—hence the increase in eco-design depends on consumer aware-
ness and preferences. When compared with rural people, urban people are more
aware of the environmental impact of their clothing [6, 7]. When we discuss
environmental impacts with denim manufacturers, they suggest that the consumer
phase of the denim life cycle has the biggest impact on the carbon footprint. Hence it
is necessary to educate consumers regarding the selection of the clothes they wear
every day; this will change the environmental impact of denim [7, 10, 23, 35].

Conclusion and Further Outlook

The carbon footprints associated with large universities have a major impact on the
environment for our society. Globalization is inevitable and unavoidable in the
present world economic situation. Many industries are affected positively or nega-
tively by the globalization trend. Sustainability has become an essential attribute of
today’s textile and clothing industry, the process of transforming the textile industry
into more sustainable one is very sensitive, needs a lot of knowledge, skills and com-
mitment. Sustainable apparel products can be defined as a part of the growing design
philosophy and trend of sustainability, the goal of which is to create a system which
can be supported indefinitely in terms of environmentalism and economic responsi-
bility. Conventional textile production is one of the most polluting industries on the
planet. The World Bank estimates that the textile industry is responsible for as much
as 20 percent of industrial pollution in our rivers and land. Environmental impacts
occur throughout the production chain and most attention is paid to water consump-
tion, chemical use, and waste and greenhouse gas emissions. The textile industry has
taken several initiatives to reduce its environmental impact and improve economic
conditions.
The textile and apparel industries are notorious for their excessive contribution of
waste and pollution to our environment. The unsustainable practices trends of poorly
designed, raw materials selection, processing, manufacturing, and disposing of
apparel product is a major contributing factor to this problem. The responsibility
for ensuring sustainable work environment is reflecting from all most sides i.e.,
producers, consumer, buyer, government, nongovernmental agencies. The ongoing
global competition for cleaner and lower price, women work environment and wage
have increased to the satisfactory level for some countries. Hence, growing aware-
ness and leading them towards sustainable practices in the textile and clothing
business for a greener world. Part of the problem is that in today’s complex global
supply chains, where clothing is produced worldwide, the consumer has become
further and further removed from producers and the origin of products. Despite the
Carbon Footprint on Denim Manufacturing 17

textile and fashion industry’s challenges, fashion can become more sustainable and
people involved in the apparel supply chain can benefit. But in order to create an
economically sustainable fashion industry we need to rethink the way we design,
produce, consume and dispose of fashion, we need to redress fashion, so to speak.
The solution to the problem lies in understanding the real costs of producing fashion.

References
1. Ramachandra TV, Aithal BH, Sreejith K (2015) GHG footprint of major cities in India. Renew
Sust Energ Rev 44:473–495. https://doi.org/10.1016/j.rser.2014.12.036
2. Shen L, Sun Y (2016) Review on carbon emissions, energy consumption and low-carbon
economy in China from a perspective of global climate change. J Geogr Sci 26:855–870.
https://doi.org/10.1007/s11442-016-1302-3
3. (2013) Driving demand for denim jeans. In: Cott. Inc. supply chain insights. http://www.
cottoninc.com/corporate/Market-Data/SupplyChainInsights/Driving-Demand-For-Denim-Jeans/
Driving-Demand-for-Denim-Jeans.pdf
4. Koszewska M (2015) Life cycle assessment and the environmental and social labels in the
textile and clothing industry. In: Handbook of life cycle assessment of textiles and clothing.
Woodhead Publishing, Cambridge, UK, pp 325–344, https://doi.org/10.1016/B978-0-08-
100169-1.00015-0
5. Muthu SS (2015) Environmental impacts of the use phase of the clothing life cycle. In: Muthu
SS (ed) Handbook of life cycle assessment of textiles and clothing. Woodhead Publishing,
Cambridge, UK, pp 93–102
6. Periyasamy AP, Wiener J, Militky J (2017) Life-cycle assessment of denim. In: Muthu SS (ed)
Sustainability in denim. Woodhead Publishing, Cambridge, UK, pp 83–110, https://doi.org/
10.1016/B978-0-08-102043-2.00004-6
7. Periyasamy AP, Jiri M (2017) 10 – denim and consumers’ phase of life cycle. In: Muthu SS (ed)
Sustainability in denim. Woodhead Publishing, Cambridge, UK, pp 257–282, https://doi.org/
10.1016/B978-0-08-102043-2.00010-1
8. Periyasamy AP, Militky J (2017) Denim processing and health hazards. In: Muthu SS (ed)
Sustainability in denim. Woodhead Publishing, Cambridge, UK, pp 161–196, https://doi.org/
10.1016/B978-0-08-102043-2.00007-1
9. Henry BK, Russell SJ, Ledgard SF et al (2015) LCA of wool textiles and clothing. In: Muthu SS
(ed) Handbook of life cycle assessment of textiles and clothing. Woodhead Publishing, Cam-
bridge, UK, pp 217–254
10. Rana S, Karunamoorthy S, Parveen S, Fangueiro R (2015) Life cycle assessment of cotton
textiles and clothing. In: Handbook of life cycle assessment of textiles and clothing. Woodhead
Publishing, Cambridge, UK, pp 195–216
11. Downey L (2014) A short history of denim. In: Levi Strauss Co. http://www.levistrauss.com/
wp-content/uploads/2014/01/A-Short-History-of-Denim2.pdf. Accessed 2 Oct 2016
12. Hackett T (2015) A comparative life cycle assessment of denim jeans and a cotton t-shirt: the
production of fast fashion essential items from cradle to gate. College of Agriculture at the
University of Kentucky
13. Zhang Y, Liu X, Xiao R, Yuan Z (2015) Life cycle assessment of cotton T-shirts in China. Int J
Life Cycle Assess 20:994–1004. https://doi.org/10.1007/s11367-015-0889-4
14. Yafa S (2006) Cotton: the biography of a revolutionary fiber, first. Penguin Books, USA
15. Allen W (2004) Fact sheet on U.S.A cotton subsidies and cotton production. In: Organic Con-
sumers Association. https://www.organicconsumers.org/old_articles/clothes/224subsidies.php.
Accessed 15 Nov 2016
16. Oosterhuis DM, Cothren JT (2012) Flowering and fruiting in cotton. The cotton foundation
 18 A. P. Periyasamy and G. Duraisamy

17. Fertilizer use-cotton, USDA. http://www.ers.usda.gov/data-products/fertilizer-use-and-price.

aspx#26737
18. Kalliala ME, Nousiainen P (1999) Life cycle assessment environmental profile of cotton and
polyester. AUTEX Res J:8–20
19. Wu J, Guo W, Feng J et al (2014) Greenhouse gas emissions from cotton field under different
irrigation methods and fertilization regimes in arid northwestern China. Sci World J 2014:1–10
20. Patra AK, Pattanayak AK (2015) Novel varieties of denim fabrics. In: Paul R (ed) Denim.
Woodhead Publishing, Cambridge, UK, pp 483–506
21. McLoughlin J, Hayes S, Paul R (2015) Cotton fibre for denim manufacture. In: Paul R (ed)
Denim and jeans. Woodhead Publishing, Cambridge, UK, pp 15–36
22. Eryuruk SH (2015) Life cycle assessment method for environmental impact evaluation and
certification systems for textiles and clothing. In: Muthu SS (ed) Handbook of life cycle
assessment of textiles and clothing. Woodhead Publishing, Cambridge, UK, pp 125–148
23. Pardo Martínez CI (2010) Energy use and energy efficiency development in the German and
Colombian textile industries. Energy Sustain Dev 14:94–103. https://doi.org/10.1016/j.
esd.2010.02.001
24. Periyasamy AP, Vikova M, Vik M (2017) A review of photochromism in textiles and its
measurement. Text Prog 49:53–136. https://doi.org/10.1080/00405167.2017.1305833
25. Periyasamy AP (2016) Effect of PVAmHCl pre-treatment on the properties of modal fabric dyed
with reactive dyes: an approach for salt free dyeing. J Text Sci Eng 6(262):1–9. https://doi.org/
10.4172/2165-8064.1000262
26. Periyasamy AP, Effect of alkali pretreatment and dyeing on fibrillation properties of lyocell
fiber, RMUTP International Conference: Textiles & Fashion 2012, Bangkok, Thailand. http://
decade1.ird.rmutp.ac.th/wp-content/uploads/2012/09/Section-II-3.pdf
27. Periyasamy AP, Dhurai B (2011) Salt free dying. Pakistan Textile Journal, 41–43, https://www.
ptj.com.pk/Web-2011/04-2011/April-2011-PDF/Finishing-Aravin-Prince.pdf
28. Periyasamy AP, Dhurai B, Thangamani K (2011) Salt free dyeing: a new method of dyeing of
Lyocell fabrics with reactive dyes. Autex Res J 11:14–17, http://www.autexrj.com/cms/
zalaczone_pliki/3_01_11.pdf
29. Teli MD (2016) 8 – environmental textiles: testing and certification. In: Wang L (ed) Perfor-
mance testing of textiles. Woodhead Publishing, Cambridge, UK, pp 177–192
30. Mohanty RP, Prakash A (2014) Green supply chain management practices in India: a confir-
matory empirical study. Prod Manuf Res 2:438–456. https://doi.org/10.1080/
21693277.2014.921127
31. Sarkis J (2003) A strategic decision framework for green supply chain management. J Clean
Prod 11:397–409. https://doi.org/10.1016/S0959-6526(02)00062-8
32. Seuring S (2004) Integrated chain management and supply chain management comparative
analysis and illustrative cases. J Clean Prod 12:1059–1071. https://doi.org/10.1016/j.
jclepro.2004.02.006
33. Nurul T, Tengku A, Jaafar HS, Tajuddin RM (2016) Green supply chain: awareness of logistics
industry in Malaysia. Procedia Soc Behav Sci 219:121–125. https://doi.org/10.1016/j.
sbspro.2016.04.052
34. California Energy Commission (2016) Clothes dryers. In: Consum. Energy Cent. http://www.
consumerenergycenter.org/residential/appliances/dryers.html
35. Lee J, Hoelle N, Rogers D, et al (2009) An empirical study of energy efficiency of clothes
dryers. In: International conference on engineering design ICED 2009. Stanford university,
Stanford, pp 24–27
36. (2010) What’s the carbon footprint of a load of laundry? Guard

View publication stats