Scribd
Upload
54 views

Types of Main Memory: 1-Read-Write or Random Access Memory (RAM)

The document summarizes the main types of computer memory. It discusses [1] read-write random access memory (RAM) which is volatile and used to store active programs and data, [2] read-only memory (ROM) which is non-volatile and used to store permanent programs, and [3] various types of RAM like DRAM, SRAM, VRAM which are optimized for different purposes. It also covers ROM types like PROM, EPROM, EEPROM that can be programmed and reprogrammed with special equipment.

Uploaded by

Sarmad Salih Jawad Alkodary
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
54 views

Types of Main Memory: 1-Read-Write or Random Access Memory (RAM)

The document summarizes the main types of computer memory. It discusses [1] read-write random access memory (RAM) which is volatile and used to store active programs and data, [2] read-only memory (ROM) which is non-volatile and used to store permanent programs, and [3] various types of RAM like DRAM, SRAM, VRAM which are optimized for different purposes. It also covers ROM types like PROM, EPROM, EEPROM that can be programmed and reprogrammed with special equipment.

Uploaded by

Sarmad Salih Jawad Alkodary
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Computer Fundamentals

Lec. (7) 1st stage

College of Computer Technology


Dept.Information Networks

Types of Main Memory

1- Read-write or random access memory( RAM)


It has a variable content , also it is generally used to store the variable data. RAM
can also be used to store frequently changed programs and other information. The term
“random” means that any memory location can be accessed in the same amount of time,
regardless of its position in the memory.

RAM allows the computer to store information quickly for later reference:
1- The active part of the operating system, the fundamental program that control the
operation of the computer.
2- The application program being executed (for example a letter being written with the
word processing program).
3- A representation of the data being presented on the video display

In RAM, the stored information will be lost when computer power supply is
removed (even a short interruption). That is RAM, is volatile memory. Some form of
RAM, called flash memory, retain their electrical charges when a computer is turned off
When program instruction, reads the data in memory address, it gets a copy of the data.
This is called a nondestructive read, because the contents of the memory address are not
changed. Sending data to a RAM memory address is called a destructive write, because
the new data erases whatever was there before.

28
Figure 9: internal organization of RAM

2- Read only memory (ROM): The real difference between RAM and ROM is
this: information that is stored in RAM can be changed. It is an nonvolatile
memory, when the computer turn off , the contents of ROM are not change, that
is another different between RAM and ROM. Sending data to a ROM memory
address is ineffective , because the contents of ROM are permanent.

Types of RAM
Various RAM chips have been developed to move data in and out of memory
quicker, to avoid errors and to make collections of RAM chips smaller. Here are the
most common types of RAM:
1- DRAM (Dynamic RAM): For years, the most common type of main
memory. “ Dynamic” refers to the memory’s method of storage, basically
storing the charge on a capacitor, which leaks the charge over time and
must be refreshed every 10-100 ms.

29
2- SRAM (Static RAM): Unlike DRAM doesn’t need to have its electrical
charges constantly refreshed because the contents of each location
persist as long as power is applied to the chips. SRAM is usually faster
than DRAM but more expensive, so it is used for must speed-critical
parts of a computer, such as the cache memory.

3- VRAM (Video): RAM optimized for video adapters. VRAM chips have two
ports so that video data can be written to chips at the same time the
video adapter continuously reads the memory to refresh the monitor’s
current display.

4- EDO RAM (Extended Data Out RAM): Faster than DRAM. EDO memory
can send data even while receiving instructions about what data to
access next.

5- SDRAM (Synchronous DRAM): RAM designed to keep up with the bus


speed of fast processors. SDRAMs are designed with two internal banks
of transistors for storing data. This allows one bank to get ready for
access while the other bank is being accessed. This is most often the
RAM of choice for Pentium-class PCs.

6- DDR SDRAM (Double data-rate synchronous DRAM) : Enhancement of


SDRAM that uses both edges as control signals.

7- SIMM (Single In-line Memory Modules): memory chips are put onto a
small circuit board with pins along the bottom , which plugs into a
connector on the motherboard.

8- DIMM (Dual In-line Memory Module): Similar to SIMMs, DIMM use


memory chips and separate connector pins on both sides of the circuit
board to increase the amount of memory that can be plugged into a
single connector and to increase the size of the data path for faster data
transfer.

9- ECC (Error Correcting Code): RAM that uses extra bits to detect errors.
Types of memory such as DRAM, SDRAM and DIMM may also be ECC
chips.

30
ROM can be divided as:

1- ROMS: The first type of ROM the contents are determine by a masking
operation that is performed while the chip is being manufactured such chip
cannot be altered by the user.

2- PROM (Programmable ROM): The contents of this type allow the data to be
loaded by the user if the proper equipment is a available. Once a memory is
programmed, its contents can never be changed.

EPROM (erasable Programmable ROM) and EAPROM (electrically alterable


PROM): this type of ROM can be erasable, reprogrammable by using special
equipment (ultraviolet light) and can be reprogrammed as often as required .

31

You might also like