Scribd
Upload
353 views

Module 3: Mass Transfer Coefficients: Assignment Problems

This document contains assignment problems and short questions related to mass transfer coefficients. It includes 4 assignment problems calculating mass transfer coefficients and flux for different systems. It also lists 13 short questions defining mass transfer coefficients, explaining film theory, penetration theory, two-film resistance theory, and how mass transfer is affected by different parameters. The questions cover key concepts in using mass transfer coefficients to analyze diffusion and absorption processes.

Uploaded by

Shiva Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
353 views

Module 3: Mass Transfer Coefficients: Assignment Problems

This document contains assignment problems and short questions related to mass transfer coefficients. It includes 4 assignment problems calculating mass transfer coefficients and flux for different systems. It also lists 13 short questions defining mass transfer coefficients, explaining film theory, penetration theory, two-film resistance theory, and how mass transfer is affected by different parameters. The questions cover key concepts in using mass transfer coefficients to analyze diffusion and absorption processes.

Uploaded by

Shiva Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

NPTEL – Chemical – Mass Transfer Operation 1

Assignment and Short type questions

Module 3: Mass Transfer Coefficients

Assignment problems:
Assignment problem 3.1: Ammonia is absorbed into water from an air-
ammonia mixture at 300 K and 1 atm. The individual film coefficients are kL = 6.3
cm/hr and kG = 1.17 kmol/m2-hr-atm. The equilibrium relationship for very dilute
solutions of ammonia in water at 300 K and 1 atm is 1.64. Determine: a) k y and kx
c) Ky. Ans: a) 3.25  10-4 kmole/m2s, b) 9.722  10-4 kmole/m2s, c) 0.21
kmole/m2s.

Assignment problem 3.2: An ethanol (A)-water (B) solution in the form of a


stagnant film 2.0 mm thick at 293 K is in contact at one surface with an organic
solvent in which ethanol is soluble and water is insoluble. Hence N B = 0. At point
1, the concentration of ethanol is 16.8 wt% and the solution density is 972.8
kg/m3. At point 2, the concentration of ethanol is 6.8 wt% and density is 988.1
kg/m3.The diffusivity of ethanol is 0.740 × 10-9 m2/s. Calculate the steady state
flux NA.

Assignment problem 3.2: In an experimentation, dry air flows upward through


the core of a wetted column where water flows down the inside wall. The wetted
column is a 25-mm ID and 1 m long. Dry air enters at the rate of 7 kg/m 2-s. The
air is controlled everywhere at its average conditions of 309 K and 1 atm, the
water at 294 K, and the mass-transfer coefficient constant. Estimate the average
partial pressure of water in the air leaving. Ans: 1.578 kPa.

Assignment problem 3.3: For a system in which component A is transferring


from the gas phase to the liquid phase, the equilibrium relation is given by P A,i =
0.8XAi where PA,i is the equilibrium partial pressure in atm. and XA,i is the

Joint initiative of IITs and IISc – Funded by MHRD Page 1 of 3


NPTEL – Chemical – Mass Transfer Operation 1

equilibrium liquid concentration in molar fraction. At one point in the apparatus,


the liquid stream contains 4.5 mole % and the gas stream contains 9.0 mole % A.
The total pressure is 1 atm. The individual gas-film coefficient at this point is kG =
3.0 mole/m2-s-atm. Fifty per cent of the overall resistance to mass transfer is
known to be encountered in the gas phase. Evaluate
a) The overall mass-transfer coefficient and individual liquid-film coefficient
b) The molar flux of A
c) The interfacial concentrations of A.
Ans: a) ky = 3.0 mole/m2/s, Ky = 1.5 mole/m2/s, kx = 2.4 mole/m2/s; b)
0.081 mole/m2/s; c) xAi = 0.079, yAi = 0.0632

Assignment problem 3.4: Show that for equi-molar counter-diffusion from a


sphere to a surrounding stationary infinite medium, the Sherwood number
(Kgd/DAB) based on the diameter of the sphere is equal to 2. Kg is the mass
transfer coefficient, d is the diameter of sphere and DAB is the molecular
diffusivity.

Short type questions

1. How mass transfer coefficient can be defined from the concept of


molecular diffusion?
2. Why are k-type mass transfer coefficients for very dilute solutions more
significant than F-type mass transfer coefficients?
3. How mass transfer coefficient related to film thickness of liquid?
4. How mass transfer coefficient is related to void fraction in a paced bed?
5. What is film theory? According to film theory, how mass transfer
coefficient is related to molecular diffusivity?
6. What is penetration theory? How as per the penetration theory, the mass
transfer coefficient is proportional to the square root of the diffusivity.
7. How the penetration theory is different from surface renewal theory?

Joint initiative of IITs and IISc – Funded by MHRD Page 2 of 3


NPTEL – Chemical – Mass Transfer Operation 1

8. How hydrodynamic flow characteristics affect the mass transfer


phenomena?
9. Explain the two-film resistance theory.
10. Why overall mass transfer coefficient is considered in many practical mass
transfer operations?
11. Give an example where total resistance equals the liquid film resistance
during interphase mass transfer.
12. Derive the relationship between the overall mass transfer coefficient and
1 1 m
individual mass transfer coefficients as   . Assume the
K y ky kx

equilibrium-distribution represent a straight line. The notations imply their


usual meanings.
13. The absorption of a very soluble gas is said to be gas–phase controlling
mass transfer and the absorption of a gas of low solubility is said to be
liquid–phase controlling mass transfer- Explain.

Joint initiative of IITs and IISc – Funded by MHRD Page 3 of 3

You might also like