We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1
SketchUp Pro Quick Reference Card | Mac
Tool Operation Instructions
2 Point Arc (A) Bulge specify bulge amount by typing a number and Enter Large Tool Set Dynamic Components Radius specify radius by typing a number, the R key, and Enter Segments specify number of segments by typing a number, the S key, and Enter Select (Spacebar) Make Component Interact Component Options Circle (C) Shift lock current inferences Radius specify radius by typing a number and Enter Paint Bucket (B) Eraser (E) Component Attributes Segments specify number of segments by typing a number, the S key, and Enter Eraser (E) Option soften/smooth (use on edges to make adjacent faces appear curved) Line (L) Freehand Sandbox (Terrain) Shift hide Option+Shift unsoften/unsmooth From Contours From Scratch Rectangle (R) Rotated Rectangle Follow Me Command use face perimeter as extrusion path Expert Tip! first Select path, then choose the Follow Me tool, then click on the face to extrude Smoove Stamp Circle (C) Polygon Line (L) Shift lock in current inference direction Arrows lock direction; up = blue, right = red, left = green, and down = parallel/perpendicular Drape Add Detail Length specify length by typing a number and Enter Arc 2 Point Arc (A) Look Around Eye Height specify eye height by typing a number and Enter Flip Edge Move (M) Option move a copy 3 Point Arc Pie Shift hold down to lock in current inference direction Move (M) Push/Pull (P) Standard Views Command auto-fold (allow move even if it means adding extra edges and faces) Arrows lock direction; up = blue, right = red, left = green, and down = parallel/perpendicular Iso Top Distance specify move distance by typing a number and Enter Rotate (Q) Follow Me External Copy Array n copies in a row: move first copy, type a number, the X key, and Enter Front Right Internal Copy Array n copies in between: move first copy, type a number, the / key, and Enter Scale (S) Offset (F) Offset (F) Command allow results to overlap Back Left Distance specify an offset distance by typing a number and Enter Tape Measure (T) Dimensions Orbit (O) Option hold down to disable “gravity-weighted” orbiting Style Shift hold down to activate Pan tool Protractor Text Paint Bucket (B) Option fill material – paint all matching adjacent faces X-Ray Back Edges Shift replace material – paint all matching faces in the model Axes 3D Text Option+Shift replace material on object – paint all matching faces on the same object Wireframe Hidden Line Command hold down to sample material Orbit (O) Pan (H) Push/Pull (P) Option push/pull a copy of the face (leaving the original face in place) Shaded Double-Click apply last push/pull amount to this face Shaded with Textures Zoom (Z) Zoom Window Distance specify a push/pull amount by typing a number and Enter Monochrome Rectangle (R) Option start drawing from center Zoom Extents Previous Dimensions specify dimensions by typing length, width and Enter ie. 20,40 Rotated Rectangle Shift lock in current direction/plane Location Command lock drawing plane for first edge (after first click) Position Camera Walk Add Location... Toggle Terrain Dimensions, Angle click to place first two corners, then type width, angle and Enter ie. 90,20 Rotate (Q) Option rotate a copy Look Around Section Plane Angle specify an angle by typing a number and Enter Warehouse Solid Tools Slope specify an angle as a slope by typing a rise, a colon (:), a run, and Enter ie. 3:12 3D Warehouse... Share Model... Scale (S) Option hold down to scale about center Outer Shell Intersect (Pro) Shift hold down to scale uniformly (don’t distort) Extension Amount specify a scale factor by typing a number and Enter ie. 1.5 = 150% Share Component... Warehouse... Length specify a scale length by typing a number, a unit type, and Enter ie. 10m Union (Pro) Subtract (Pro) Select (Spacebar) Option add to selection Trim (Pro) Split (Pro) Send to LayOut (Pro) Classifier (Pro) Shift add/subtract from selection Option+Shift subtract from selection Tape Measure (T) Option toggle create guide or measure only Middle Button (Wheel) Scroll Zoom L R Arrows lock direction; up = blue, right = red, left = green, and down = parallel/perpendicular Click-Drag Orbit Resize resize model: measure a distance, type intended size, and Enter Shift+Click-Drag Pan Zoom (Z) Shift hold down and click-drag mouse to change Field of View Double-Click re-center view