Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Type ISO-AB 2000: Plug Valve With PFA/FEP Lining and PTFE Sleeve

    Uploaded by

    andrebita
    The document describes a type ISO-AB 2000 plug valve with the following key features: - PTFE sleeve and PFA/FEP lining that are resistant to chemicals and temperatures up to 210°C - Non-lubricated and easy to turn with minimal cavities - Economical for automation applications due to its design - Available in sizes from DN 15 to 300 with pressure ratings from PN 10 to 40

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Type ISO-AB 2000: Plug Valve With PFA/FEP Lining and PTFE Sleeve

    Uploaded by

    andrebita
    24 views2 pages
    The document describes a type ISO-AB 2000 plug valve with the following key features: - PTFE sleeve and PFA/FEP lining that are resistant to chemicals and temperatures up to 210°C - Non-lubricated and easy to turn with minimal cavities - Economical for automation applications due to its design - Available in sizes from DN 15 to 300 with pressure ratings from PN 10 to 40

    Original Title

    3-2-1_AZ-GB_ISOAB2000

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a type ISO-AB 2000 plug valve with the following key features: - PTFE sleeve and PFA/FEP lining that are resistant to chemicals and temperatures up to 210°C - Non-lubricated and easy to turn with minimal cavities - Economical for automation applications due to its design - Available in sizes from DN 15 to 300 with pressure ratings from PN 10 to 40

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    Type ISO-AB 2000: Plug Valve With PFA/FEP Lining and PTFE Sleeve

    Uploaded by

    andrebita
    The document describes a type ISO-AB 2000 plug valve with the following key features: - PTFE sleeve and PFA/FEP lining that are resistant to chemicals and temperatures up to 210°C - Non-lubricated and easy to turn with minimal cavities - Economical for automation applications due to its design - Available in sizes from DN 15 to 300 with pressure ratings from PN 10 to 40

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    ARMATUREN

    free of cavities & maintenance

    Type ISO-AB 2000


    Plug Valve with PFA/FEP lining
    and PTFE Sleeve
    ●● PTFE sleeve easy to replace
    ●● repairing ecologically

    ●● higher temperature resistance up to 210 °C 3.2.1 Type ISO-AB 2000


    ●● non-lubricated easy turning
    ●● economic automatisation DN 15 - 300 PN 10 - 40
    ●● PFA/FEP lining min. 3mm NPS ½“ - 12“ / Class 150 - 300
    ●● chemical resistant
    ●● free of cavities
    ●● vacuum tight
    TYPE AB 2000
    Design characteristics

    19
    18
    17
    16 11
    19 hand lever 1.4301
    15 9
    18 bolt A2-70
    14
    12 17 positioner GGG40
    8 16 Static-eliminator (optional) 1.4301
    10
    7 15 nut 8.
    13 6 14 adjusting screw 8.8
    13 nut 8.
    12 bolt 8.8
    11 adjusting ring 1.4308
    10 cover GGG40.3
    9 sealing ring PTFE
    8 pressure ring 1.4541
    7 diaphragm 1.4571
    6 diaphragm PTFE
    2 5 lining plug PFA / FEP
    4 plug 1.4408
    4
    3 sleeve PTFE
    3
    2 lining body PFA / FEP
    5 1 body GGG40.3
    1 Pos. Description Material

    1) other available body materials:


    Low temp. 1.1138 / LCB, Stainless Steel 1.408 / 316
    others on request
    Pressure - Temperature - Table
    P [bar] 0 3 5 10 25 40 40 40 40 40 30 20 10 3 2
    T [°C] -40 -30 -20 -10 0 20 40 60 80 100 120 140 160 180 200
    Note: The a.m. values depend on the application (medium)

    3.2.1 Rev4 - 10/18 - GB Subject to technical change without notice


    NPS KV-Value CV-Value Weight Standard break allowable
    DN PN ANSI 150 [m³ / h] [m³ / h] [kg] off torque torque
    DIN ANSI Md los [Nm] 2) Md max [Nm]
    15 10-40 1/2“ 7,1 8,2 3,5 2,5 42 147
    25 10-40 1“ 32 37 4,6 3,3 50 170
    40 10-40 1 1/2“ 79 92 9 6,5 100 350
    50 10-40 2“ 127 147 13 11 136 462
    80 10-40 3“ 246 285 20 17 200 700
    100 10-40 4“ 203 235 27 23 240 816
    100S 10-40 4“S 447 517 27 23 305 1037
    150 10-16 6“ 822 951 70 61 860 3010
    200 10-16 8“ 1727 1997 125 94 1325 4637
    250 10-16 10“ 2052 2373 160 127 1550 5425
    300 10-16 12“ 1707 1973 170 153 2580 4225
    350 10-16 14“ * * 210 180 5000 16500
    400 10-16 16“ * * 305 246 5000 16500
    Further sizes and pressure ratings As well As Full Bore Design Type "AB 2000" on request. *) On request.
    Including recommended safety factor (1,7) for automation

    AZ-Armaturen GmbH
    Order example: F-2-50-PN16-AB2000-GGG40.3 D-78087 Mönchweiler
    F = flange, 2 = tow-way, 50 = nominal size Waldstraße 7
    Telefon: +49 (0)7721 7504-0
    PN16 = nominal pressure 16, AB2000 = Type Telefax: +49 (0)7721 7504-13
    GGG40.3 = Body material ARMATUREN [email protected]
    free of cavities & maintenance www.az-armaturen.com

    You might also like