70-77 F RMT-GSI - Face

Project: Parwanoo - Solan Road Project (Barog Road Tunnel)
Engineering Geological Documentation of the Tunnel Face For Rock Class-IV

FACE FROM LAST PHOTO SHEET
DATE: TIME: CHAINAGE: TUNNELMETER: m SHOTCRETE LINING:
m OVERBURDEN: m NO.: NO.:
DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100
Sub- strength joint water

rock Type weather. spacing condit. apert. RMT
area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:
Lithological Properties & rock mass behaviour of sub area:
CHARACTERISTICS OF DISCONTINUITIES NO. OF SETS:

TYPE ORIENTATION ROUGHNESS PERSIST. SPACING (cm) FILLING Cons. Thickn. Aperture
Overall rock mass behaviour / general remarks: Engineering Geologist
medium
200-60
60-20
>200
20-6
high
Name / Signature
low
6-2
Material t s m
<2
Dir./Dip Angle S U P r s sl [cm] [cm]
Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

J Joint Fl Foliation S stepped r rough cl clay mi mica ca calcite t tight discontinuities high discontinuity trace exceeding unsupported area
Sl Slickenside Fo Fold U undulating s smooth sl silt fg fault gouge ch chlorite s some open discontinuities medium discontinuity trace exceeding unsupported area half of its span
Cl Cleavage A Axis of fold P planar sl slickensided sa sand si silica/quartz fe iron oxide m mainly open discontinuities low discontinuity trace within unsupported area less than half of its span
Weathering Rock strength Water condition consistency for cohesive soil
uw unweath. m moderat. rS residu. Soil xs extra strong s strong w weak xw extrem. Weak dy dry w wet se seeping hd hard st stiff s soft
sl slightly h highly cw completely weath vs very strong ms medium strong vw very weak da damp dp dripping fw flowing vt very stiff f firm vs very soft
Page-70
Engineering Geological Documentation of the Tunnel Face For Rock Class-III

area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:

medium
200-60
60-20
>200
20-6
high
Name / Signature
low
6-2
Material t s m
<2

Page-71
Engineering Geological Documentation of the Tunnel Face For Rock Class-II

area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:
CHARACTERISTICS OF DISCONTINUITIES NO. OF SETS: Overall rock mass behaviour / general remarks: Engineering Geologist
TYPE ORIENTATION ROUGHNESS PERSIST. SPACING (cm) FILLING Cons. Thickn. Aperture Name / Signature
medium
200-60
60-20
>200
20-6
high
low
6-2
Material t s m
<2

Page-72
Engineering Geological Documentation of the Tunnel Face For Rock Class-I

area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:
medium
200-60
60-20
>200
20-6
high
low
6-2
Material t s m
<2

Page-73
Engineering Geological Documentation of the Tunnel Face
Legend
Rock types
quartzite, sometimes with minor shale intercalations
limestone, argillacious limestone
shale, sometimes with minor shale intercalations, calcareous shale
tuff and agglomeratic shale
andesite / basalt
silt with boulders
silt
fault rock
1) 2) shear plane
1) with direction of displacement
2) no direction detected
1) 2) 3) major joint
medium joints
low joints
1) 2) 3) fillings: sand filling

1) sand, 2) silt, 3) clay
veins, (plinge and swell type)
1) 2) 3) Water condition:
1) dripping, 2) seeping, 3) inflow
Muller flag (angle between discontinuity and projection plane)

90°- 5° 80°± 5° 60°± 15° 30°± 15° 0°+ 15°
Page-74 cba - 07/17/2020 - 07:59:59

Engineering Geological Documentation
DATE: TIME: CHAINAGE: TUNNELMETER: m SHOTCRETE LINING: m OVERBURDEN: m NO.: NO.:
DRIVE: SECTION: DRIVE DIRECTION: **° Sketch Scale : 1:100
Sub- strength / joint water

rock Type weather apert. RMT
area: consist. spacing condit
0 1 2m
Decisive RMT:
GSI:
medium
200-60
60-20
>200
20-6
high
low
6-2
Material t s m
<2

Page-75
sl slightly h highly vs very strong ms medium strong vw very weak da damp dp dripping fw flowing vt very stiff f firm vs very soft
Page-75

area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:

medium
200-60
60-20
>200
20-6
high
Name / Signature
low
6-2
Material t s m
<2

Page-76

area: /consist.
0 1 2m
Decisive RMT:
Face GSI Value:
medium
200-60
60-20
>200
20-6
high
low
6-2
Material t s m
<2

Page-77

70-77 F RMT-GSI - Face

Uploaded by

Copyright:

Available Formats

70-77 F RMT-GSI - Face

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

70-77 F RMT-GSI - Face

Uploaded by

Copyright:

Available Formats

What geological properties are being documented?

What geological properties are being documented?

What types of discontinuities are being characterized?

What types of discontinuities are being characterized?

Project: Parwanoo - Solan Road Project (Barog Road Tunnel)

Engineering Geological Documentation of the Tunnel Face For Rock Class-IV

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

CHARACTERISTICS OF DISCONTINUITIES NO. OF SETS:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

CHARACTERISTICS OF DISCONTINUITIES NO. OF SETS:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

quartzite, sometimes with minor shale intercalations

limestone, argillacious limestone

shale, sometimes with minor shale intercalations, calcareous shale

tuff and agglomeratic shale

silt with boulders

1) 2) 3) fillings: sand filling

veins, (plinge and swell type)

Muller flag (angle between discontinuity and projection plane)

Page-74 cba - 07/17/2020 - 07:59:59

DRIVE: SECTION: DRIVE DIRECTION: **° Sketch Scale : 1:100

Sub- strength / joint water

Lithological Properties & rock mass behaviour of sub area:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

CHARACTERISTICS OF DISCONTINUITIES NO. OF SETS:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance

DRIVE: RT - SECTION: DRIVE DIRECTION: Sketch Scale : 1:100

Sub- strength joint water

Face GSI Value:

Lithological Properties & rock mass behaviour of sub area:

Dir./Dip Angle S U P r s sl [cm] [cm]

Type F Fault B Bedding Plane Roughness Type of Filling Aperture Persistance