Scribd
Upload
63 views4 pages

5V Low Level Trigger One 1 Channel Relay Module Interface Board Shield For PIC AVR DSP Arm Mcu Arduino

This document summarizes a 5V low level trigger one channel relay module interface board shield. Key details include: 1. It uses a double FR-4 circuit board with high-end SMT processing and isolation between control and load areas. 2. The relay can be triggered with a low level signal and directly control various equipment and loads. 3. Specifications include a 5V power supply, 4mA idle current, 2mA trigger current, and 10A relay contact capacity at 250V AC or 30V DC.

Uploaded by

phuja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views4 pages

5V Low Level Trigger One 1 Channel Relay Module Interface Board Shield For PIC AVR DSP Arm Mcu Arduino

This document summarizes a 5V low level trigger one channel relay module interface board shield. Key details include: 1. It uses a double FR-4 circuit board with high-end SMT processing and isolation between control and load areas. 2. The relay can be triggered with a low level signal and directly control various equipment and loads. 3. Specifications include a 5V power supply, 4mA idle current, 2mA trigger current, and 10A relay contact capacity at 250V AC or 30V DC.

Uploaded by

phuja
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

5V low level trigger One 1 Channel Relay

Module interface Board Shield For PIC AVR


DSP ARM MCU Arduino

Product introduction:

1, this module meet safety standard, control areas and load area have the
isolation groove;
2, the double FR - 4 circuit board design, high-end SMT process;
3, the relay control;
4, have power and relay operation instructions, and bright, disconnect the dawn;
5, signal input with low level signal, the common and often start conduction;
6, relay can directly control all kinds of equipment and load;
7, one often opened a normally closed contact;
8, blue KF301 terminal line more convenient.
9, module size: 43 x17x18. 5 mm;Net weight: 15 g
Module interface:
Input part:
The positive (VCC: connect 5 v power supply according to the relay voltage power
supply)
GND: 5 v power supply cathode
IN: relay module (effective) low level trigger signal trigger end
High level and low level meaning:
High level trigger refers to using the anode voltage at the VCC connection way of
a trigger and trigger the end, when the trigger side has the positive voltage or to
trigger voltage when the relay is off.
Low level trigger refers to using the negative voltage at the GND connection way
of a trigger and trigger the end, when the trigger side has 0 v low voltage or
voltage to can trigger, the relay is off.
Electrical parameters:
Voltage static current working current trigger voltage trigger current version
5 v 4 ma ma 65 0-2 v 2 ma
9 v, 5 ma ma 45 v 0 to 4 3 ma
The 12 v 5.5 3 mA mA mA 0-4 42 v
24 v 12 ma ma 40 0-12 v 3 ma
10 a relay contact capacity: 250 v (AC) or 30 v 30 a (DC)
Product use:
1. The module of power supply: power supply must be dc, voltage to the relay
2. The public end of the relay, normally open, normally closed, just single pole
double throw switch, wiring method is as follows

You might also like