0% found this document useful (0 votes)
74 views2 pages

HDH

This document contains the inputs and calculations for a heat and mass transfer problem. It defines parameters like efficiencies, temperatures, pressures, and mass flow rates. It then calculates intermediate values like enthalpies and humidity ratios at each state. The key outputs are the heat transfer rates for both the dehumidifier (delH_d) and humidifier (delH_act) sections.

Uploaded by

faisal58650
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
74 views2 pages

HDH

This document contains the inputs and calculations for a heat and mass transfer problem. It defines parameters like efficiencies, temperatures, pressures, and mass flow rates. It then calculates intermediate values like enthalpies and humidity ratios at each state. The key outputs are the heat transfer rates for both the dehumidifier (delH_d) and humidifier (delH_act) sections.

Uploaded by

faisal58650
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

File:F:\Freelancing\HDH\hdh.

EES 3/9/2020 2:14:45 AM Page 1


EES Ver. 9.457: #1514: For use only by Mohamed Shaker, Ginza, Cairo, Egypt

 d = 0.9

h = 0.9

P = 101.325 [kPa]

mw = 0.5

m da = 0.1

T w2 = 80 [C]

 a1 = 1

Twb 1 = 31.6 [C]

T a1 = Twb 1

T wo = 35 [C]

 a2 = 1

a1 =  AIRH2O , T = T a1 , P = P , R =  a1

h a1 = h AIRH2O , T = T a1 , P = P , R =  a1

T a3 = T w2

 a3 = 1

w a3 =  AIRH2O , T = T a3 , P = P , R =  a3

h a3 = h AIRH2O , T = T a3 , P = P , R =  a3

delH maxd = h a3d – h a1

delH act = delH maxd ·  h

h a2 = h a1 + delH act

T a2 = T AIRH2O , h = h a2 , P = P , R =  a2

T w1d = T a2

h w1d = h Steam , P = P , T = T w1d

delH dmax = h w1d – h wo

delH d =  d · delH dmax

h w1 = h wo + delH d

T w1 = T Steam , h = h w1 , P = P

a2 =  AIRH2O , T = T a2 , P = P , R =  a2

h w2 = h Steam , P = P , T = T w2

T w3 = T Steam , P = P , h = h w3
File:F:\Freelancing\HDH\hdh.EES 3/9/2020 2:14:45 AM Page 2
EES Ver. 9.457: #1514: For use only by Mohamed Shaker, Ginza, Cairo, Egypt

m b · h w3 – m w · h w2 = m da · h a1 – h a2

h wo = h Steam , P = P , T = T wo

T pw = T a1

h pw = h Steam , P = P , T = T pw

m w – m da · a2 – a1 = mb

m pw = m da · a2 – a1

mw · h w1 – h wo + m pw · h pw = m da · h a2 – h a1

SOLUTION
Unit Settings: SI C kPa kJ mass deg
delHact = 31.66 [kJ/kg] delHd = 6.062 [kJ/kg]
delHdmax = 6.735 [kJ/kg] delHmaxd = 35.18
d = 0.9 h = 0.9
ha1 = 108.4 [kJ/kg] ha2 = 140.1 [kJ/kg]
ha3 = 1530 [kJ/kg] ha3d = 143.6 [kJ/kg]
hpw = 132.5 [kJ/kg] hw1 = 152.7 [kJ/kg]
hw1d = 153.4 [kJ/kg] hw2 = 335 [kJ/kg]
hw3 = 329.3 hwo = 146.7 [kJ/kg]
mb = 0.499 mda = 0.1
mpw = 0.001024 mw = 0.5
a1 = 0.0299 a2 = 0.04014
P = 101.3 [kPa] a1 = 1
a2 = 1 a3 = 1
Twb1 = 31.6 [C] Ta1 = 31.6 [C]
Ta2 = 36.61 [C] Ta3 = 80 [C]
Tpw = 31.6 [C] Tw1 = 36.45 [C]
Tw1d = 36.61 [C] Tw2 = 80 [C]
Tw3 = 78.65 [C] Two = 35 [C]
wa3 = 0.5459

1 potential unit problem was detected.


EES suggested units (shown in purple) for delH_act delH_d delH_dmax h_a1 h_a2 h_a3 .

You might also like