Scribd
Upload
4K views1 page

GSB Gradation: Sieve Analysis For Lower Granular Sub-Base Mort&H Table 400-2 (Grading 1)

This document provides the results of a sieve analysis test on a sample of material to check if it meets the grading specifications for use as a lower granular sub-base layer in a metro rail construction project. The test was conducted on a sample taken from an unspecified source and location. The results are presented in a table showing the percentage of material retained and passing each sieve size, along with the specified limits. A graph compares the sample's particle size distribution to the acceptable range.

Uploaded by

Amjad Pathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
4K views1 page

GSB Gradation: Sieve Analysis For Lower Granular Sub-Base Mort&H Table 400-2 (Grading 1)

This document provides the results of a sieve analysis test on a sample of material to check if it meets the grading specifications for use as a lower granular sub-base layer in a metro rail construction project. The test was conducted on a sample taken from an unspecified source and location. The results are presented in a table showing the percentage of material retained and passing each sieve size, along with the specified limits. A graph compares the sample's particle size distribution to the acceptable range.

Uploaded by

Amjad Pathan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

GSB GRADATION

Project : UAA-04 Package

Project Ref.No. :UAA-04


Clients : Chennai Metro Rail Corporation Limited

Independent Consultants : EMBYE Consortium

SIEVE ANALYSIS FOR LOWER GRANULAR SUB-


BASE MORT&H TABLE 400-2 (GRADING 1)
DOC. NO. :QSF/L&T/CMRL/UG/Q081B

Source : Date of sampling :

Location : Date of testing :

Weight of sample : grams Activity : Lower GSB Layer


Weight of
material Cumulativ Specified Limits
IS Sieve % weight
retained e weight % Passing
(mm) retained Lower Upper
(gms)
(gms)
75 100 100

26.50 55 75

4.75 10 30

0.075 0 10
% Passing

100
90
80
70
60
50
40
30
20
10
0
0.01 0.10 1.00 10.00 100.00
Sieve Size (mm)

Remarks :

Tested by Witnessed& verified by

Contractor's Representative GC's Representative

You might also like