Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Fibre Cement Wall Sleeve FZR

    Uploaded by

    Stroe George
    The fibre cement wall sleeve FZR allows pipes to be inserted through walls, ceilings and floors. It is asbestos-free, corrosion-resistant, waterproof, electrically non-conductive, and can be used for pipe diameters between 80-1400mm and wall thicknesses up to 1200mm. The external groove creates a tight connection to the structure when embedded in concrete or masonry. Standard press seals or individual press seals can provide a watertight seal between the pipe and inside of the wall sleeve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fibre Cement Wall Sleeve FZR

    Uploaded by

    Stroe George
    49 views2 pages
    The fibre cement wall sleeve FZR allows pipes to be inserted through walls, ceilings and floors. It is asbestos-free, corrosion-resistant, waterproof, electrically non-conductive, and can be used for pipe diameters between 80-1400mm and wall thicknesses up to 1200mm. The external groove creates a tight connection to the structure when embedded in concrete or masonry. Standard press seals or individual press seals can provide a watertight seal between the pipe and inside of the wall sleeve.

    Original Title

    02_Fibre_cement_wall_sleeve_FZR

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The fibre cement wall sleeve FZR allows pipes to be inserted through walls, ceilings and floors. It is asbestos-free, corrosion-resistant, waterproof, electrically non-conductive, and can be used for pipe diameters between 80-1400mm and wall thicknesses up to 1200mm. The external groove creates a tight connection to the structure when embedded in concrete or masonry. Standard press seals or individual press seals can provide a watertight seal between the pipe and inside of the wall sleeve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views2 pages

    Fibre Cement Wall Sleeve FZR

    Uploaded by

    Stroe George
    The fibre cement wall sleeve FZR allows pipes to be inserted through walls, ceilings and floors. It is asbestos-free, corrosion-resistant, waterproof, electrically non-conductive, and can be used for pipe diameters between 80-1400mm and wall thicknesses up to 1200mm. The external groove creates a tight connection to the structure when embedded in concrete or masonry. Standard press seals or individual press seals can provide a watertight seal between the pipe and inside of the wall sleeve.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Standard wall sleeve

    Fibre cement wall sleeve FZR

    Article code:
    FZR (D)/X

    Features and technical data:

    • application: all load cases according to DIN 18195 Part 4


    waterproof concrete stress class 1
    • suitable for any type of wall
    • asbestos free
    • corrosion-resistant
    • incombustible
    • electrically non-conductive
    • optimal connection to concrete
    • pipe diameters from 80 up to 1,400 mm
    • all-round external groove creates a tight connection with the structure
    • available for wall thickness up to 1,200 mm

    The classic.
    The asbestos-free fibre cement wall sleeve allows all types of pipes to be inserted into buildings through walls, ceilings and floors. The wall sleeve
    can be embedded in concrete or in masonry work or cast into wall penetrations with mortar. The external groove creates a tight connection with
    the structure. The wall sleeve is corrosion-resistant, tight against pressurised water and electrically non-conductive. In conjunction with our press
    seals, an absolutely watertight seal is produced between the pipe or cables and the inside of the wall sleeve.

    cablepipebuildingentry+
    Fibre cement wall sleeve FZR

    The information in this publication represents our current state of technical knowledge and experience. However, given the multitude of possible influences affecting the processing and use of our products, this information does not exempt processors and users from
    running their own tests and trials. We will replace any parts that cannot be used due to defective materials. We do not replace parts for defects caused due to transport, storage or faulty installation and the consequences thereof. All information without guarantee.
    Technical data

    Media pipe
    Wall sleeve Wall sleeve
    Article code
    ID OD Optimal Max. possible
    application range OD application range OD *

    80 mm ≤ 140 mm 0 – 50 mm 0 – 56 mm FZR 80/X


    100 mm ≤ 160 mm 0 – 63 mm 0 – 76 mm FZR 100/X
    125 mm ≤ 165 mm 63 – 90 mm 0 – 101 mm FZR 125/X
    150 mm ≤ 187 mm 90 – 112 mm 0 – 125 mm FZR 150/X
    200 mm ≤ 238 mm 110 – 162 mm 0 – 171 mm FZR 200/X
    250 mm ≤ 293 mm 160 – 210 mm 0 – 214 mm FZR 250/X
    300 mm ≤ 347 mm 200 – 225 mm 0 – 250 mm FZR 300/X
    350 mm ≤ 414 mm 225 – 270 mm 0 – 310 mm FZR 350/X
    400 mm ≤ 464 mm 270 – 320 mm 0 – 350 mm FZR 400/X
    450 mm ≤ 514 mm 320 – 370 mm 0 – 400 mm FZR 450/X
    500 mm ≤ 570 mm 370 – 420 mm 0 – 450 mm FZR 500/X
    600 mm ≤ 673 mm 420 – 520 mm 0 – 550 mm FZR 600/X
    700 mm ≤ 787 mm 520 – 620 mm 0 – 650 mm FZR 700/X
    800 mm ≤ 894 mm 620 – 720 mm 0 – 750 mm FZR 800/X
    900 mm ≤ 1.004 mm 720 – 820 mm 0 – 850 mm FZR 900/X
    1.000 mm ≤ 1.114 mm 820 – 920 mm 0 – 950 mm FZR 1.000/X
    1.100 mm ≤ 1.226 mm 920 – 1.020 mm 0 – 1.050 mm FZR 1.100/X
    1.200 mm ≤ 1.338 mm 1.020 – 1.110 mm 0 – 1.150 mm FZR 1.200/X
    1.300 mm ≤ 1.448 mm 1.110 – 1.210 mm 0 – 1.250 mm FZR 1.300/X
    1.400 mm ≤ 1.560 mm 1.210 – 1.310 mm 0 – 1.350 mm FZR 1.400/X
    Customized dimensions available on request. X = wall thickness in mm

    * The dimensions refer to the maximum possible outer diameter for the medium pipe;
    subject to technical feasibility, a standard press seal or a individual press seal entry may be used.

    Accessories (not included in scope of delivery)


    faserzement_futterohrr_fzr_en_140401

    Standard press seal – Individual press seal –


    is the perfect seal for pipes to be newly installed or in a closed design is tailor made to meet your
    which have already been laid in core drillings or wall requirements and forms the perfect seal for newly
    sleeves with diameters up to 500 mm. installed pipes with diam. 80 up to 1,400 mm.

    Hauff-Technik GmbH & Co. KG


    Robert-Bosch-Straße 9 Tel. +49 7322 1333-0 offi[email protected]
    89568 Hermaringen, GERMANY Fax +49 7322 1333-999 www.hauff-technik.de

    You might also like