Scribd
Upload
231 views1 page

Motorized Flow Control Valve: Function

The F20 motorized flow control valve is a variable orifice, bidirectional hydraulic valve used to control flow rates up to 120 gpm. It operates with pressures up to 3000 psi and speeds from 1 to 48 seconds. The valve features a steel cage and spool with optional seals in buna, viton, or EPR. It draws 0.8-1 amp of current and has minimal 15 cubic inch per minute internal leakage.

Uploaded by

Iov Iftode
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
231 views1 page

Motorized Flow Control Valve: Function

The F20 motorized flow control valve is a variable orifice, bidirectional hydraulic valve used to control flow rates up to 120 gpm. It operates with pressures up to 3000 psi and speeds from 1 to 48 seconds. The valve features a steel cage and spool with optional seals in buna, viton, or EPR. It draws 0.8-1 amp of current and has minimal 15 cubic inch per minute internal leakage.

Uploaded by

Iov Iftode
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

F20 MOTORIZED FLOW CONTROL VALVE

Function
• Motor driven, variable orifice, restrictive type, hydraulic
flow control, non-pressure compensated. Pressure
balanced, bi-directional flow.
M M
Operating Pressure
• 3000 psi maximum differential
Consult factory for higher operating pressures
Hydraulic
Flow Ranges Symbol
Based on 100 PSI pressure differential with valve fully open. Example Schematic
See pressure drop curves for additional application data with 10184LS Line Body.
• 080 0-80 gpm (Equivalent to Ø.55'' orifice at full open)
• 100 0-100 gpm (Equivalent to Ø.60'' orifice at full open)
• 120 0-120 gpm (Equivalent to Ø.66'' orifice at full open)
Custom ranges are available upon request

Voltage
• 12 & 24 VDC

Construction
• Cage, Body and Spool: Steel, exposed parts plated
• Motor housing assembly: Anodized aluminum
• Standard line bodies are aluminum
Steel bodies are available upon request

Seal Material
• Buna N and polyurethane standard
Viton or EPR optional 7.27
2.00
Current Draw
• 0.8 amp when powered at 12 volts
• 1.0 amp when powered at 24 volts

Internal Leakage
• 15 cubic inch per minute per 1000 psi

Temperature
• -40 to 120°C

Operating Speed
• 1-48 seconds, See appendix page 1 for details 2.22
3.50
Cavity
• C 20-2 industry common cavity
1.44
Valve Installation Torque
• 80 ft-lbs 1 5/8-12UN-2A

Cartridge Weight 2X 1.00 3.18 3.00


• F20 cartridge only = 3.4 lbs 2X .34
• F20 with aluminum body = 6.7 lbs 4.00

Seal kit
• SFP25673
F20

Flow range: Operating Speed: Options: Line bodies:


080 0-80 gpm Select letter See appendix 10184 SAE-16 ports
100 0-100 gpm code from page 2 for 10184LS SAE-20 ports
120 0-120 gpm appendix page 1. available options. and SAE-4 LS port

Source Fluid Power - Phone: 952-368-3866 - Fax: 952-448-3392 - Sourcefp.com

You might also like