Type PC60 Load Cell

IP67
APPROVED

Product Description Approvals

The type PC60 is an aluminium single point load cell with an improved  OIML approval to C3 (Y = 7 500)
potting.  ATEX hazardous area approval for Zone
0, 1, 2, 20, 21 and 22
Application  FM hazardous area approval
 Bench and floor scales, conveyor scales and medical scales
Option
Key Features  Y = 15 000 for C3
 Wide range of capacities from 30 kg to 750 kg
 Aluminium construction Packed Weight
 Environmental Protection IP67  2.0 kg
 Maximum platform size up to 600 x 600 mm
Available Accessories
 Compatible range of electronics

A91-Rev5-GB-1(2)
WWW.FLINTEC.COM
 Specifications
Maximum capacity (Emax) kg 30 / 50 / 100 / 200 / 300 / 500 / 750
Accuracy class according to OIML R60 (GP) C3
Maximum number of verification intervals (nmax) n.a. 3 000
Minimum load cell verification interval (vmin) n.a. Emax /7 500
Temperature effect on minimum dead load output (TC0) %*RO/10°C ≤ ± 0.0400 ≤ ± 0.0187
Temperature effect on sensitivity (TCRO) %*RO/10°C ≤ ± 0.0200 ≤ ± 0.0100
Combined error %*RO ≤ ± 0.0500 ≤ ± 0.0200
Non-linearity %*RO ≤ ± 0.0400 ≤ ± 0.0166
Hysteresis %*RO ≤ ± 0.0400 ≤ ± 0.0166
Creep error (30 minutes) / DR %*RO ≤ ± 0.0600 ≤ ± 0.0166
Min. load cell verification interval (vmin opt) n.a. Emax /15 000
Option
Temp. effect on min. dead load output (TC0 opt) %*RO/10°C n.a. ≤ ± 0.0093
Rated Output (RO) mV/V 2 ± 10%
Zero balance %*RO ≤±5
Excitation voltage V 5...15
Input resistance (RLC) Ω 413 ± 20
Output resistance (Rout) Ω 350 ± 25
Insulation resistance (100 V DC) MΩ ≥ 5 000
Safe load limit (Elim) %*Emax 150
Ultimate load %*Emax 300
Safe side load %*Emax 100
Maximum platform size; loading acc. to OIML R76 mm 600 x 600
Maximum off centre distance at maximum capacity mm 200
Compensated temperature range °C –10...+40
Operating temperature range °C –20...+65 (ATEX –20...+60)
Load cell material aluminium
Sealing potted
Protection according EN 60 529 IP67
The limits for Non-Linearity, Hysteresis, and TCRO are typical values.
The sum of Non-linearity, Hysteresis and TCRO meets the requirements according to OIML R60 with pLC=0.7.

Dimensions (in mm)

188
52
35 107 35 5.5

62.3

15
*M8 (8x) 52

+0.2
63.5 - 1.0 50

Mounting bolts M8 8.8; torque 25 Nm. Torque value assumes oiled threads.
* Unified thread 5/16-18 UNC is available.

Wiring
 The load cell is provided with a shielded, 6 conductor cable (AWG 26).
+ Excitation (green)
Cable jacket polyurethane + Sense (blue)
 Cable length: 3m
+ Signal (white)
 Cable diameter: 5.8 mm
 The shield is connected to the load cell body – Sense (brown)
– Excitation (black)
– Signal (red)
Shield (yellow)

A91-Rev5-GB-2(2) Specifications and dimensions are subject to change without notice.

WWW.FLINTEC.COM