Scribd
Upload
177 views2 pages

8 Channel Power Amplifier: Front Panel

The document describes an 8 channel power amplifier with front and back panel features and specifications. It has 8 independently controlled channels, digital and analog inputs, and can output 120W per channel into 8 ohms or 150W into 4 ohms. It was sold from December 2018 to present.

Uploaded by

Angel Baca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views2 pages

8 Channel Power Amplifier: Front Panel

The document describes an 8 channel power amplifier with front and back panel features and specifications. It has 8 independently controlled channels, digital and analog inputs, and can output 120W per channel into 8 ohms or 150W into 4 ohms. It was sold from December 2018 to present.

Uploaded by

Angel Baca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MI 128

8 CHANNEL POWER AMPLIFIER The Compendium

FRONT PANEL: Glass with LED/fiber-optic illuminated green/gold nomenclature. Channel 1


Circuitry Functions Indicator. Channel 2 Circuitry Functions Indicator. Channel 3
Circuitry Functions Indicator. Channel 4 Circuitry Functions Indicator. Standby
Power On Indicator. Channel 5 Circuitry Functions Indicator. Channel 6 Circuitry
Functions Indicator. Channel 7 Circuitry Functions Indicator. Channel 8 Circuitry
Functions Indicator. POWER push button: on or off.

BACK PANEL: BUS 1 Left and Right INput and OUTput jacks / BUS 2 Left and Right INput and
OUTput jacks. DIGital 1 optical and coaxial audio inputs bus connectors / DIGital 2
optical and coaxial audio inputs bus connectors. [CHANNEL 8/7 section: VOLume
control: CHANNEL 8 / 7. Channels input switch: LINE or BUS / Bus input switch: 1 (Bus 1),
2 (Bus 2), D1 (Digital Bus 1), D2 (Digital Bus 2). Channels Mode switch: MONO or
STEREO. Unbalanced inputs: Channel 8/ Left and Channel 7/ Right. Channel 8/7 /
Channel 7/R speaker output connections]. [CHANNEL 6/5 section: VOLume control:
CHANNEL 6 / 5. Channels input switch: LINE or BUS / Bus input switch: 1 (Bus 1), 2 (Bus
2), D1 (Digital Bus 1), D2 (Digital Bus 2). Channels Mode switch: MONO or STEREO.
Unbalanced inputs: Channel 6/ Left and Channel 5/ Right. Channel 8/7 / Channel 7/R
speaker output connections]. [CHANNEL 4/3 section: VOLume control: CHANNEL 4 / 3.
Channels input switch: LINE or BUS / Bus input switch: 1 (Bus 1), 2 (Bus 2), D1 (Digital
Bus 1), D2 (Digital Bus 2). Channels Mode switch: MONO or STEREO. Unbalanced
inputs: Channel 4/ Left and Channel 3/ Right. Channel 4/7 / Channel 3/R speaker
output connections]. [CHANNEL 2/1 section: VOLume control: CHANNEL 2 / 1. Channels
input switch: LINE or BUS / Bus input switch: 1 (Bus 1), 2 (Bus 2), D1 (Digital Bus 1),
D2 (Digital Bus 2). Channels Mode switch: MONO or STEREO. Unbalanced inputs:
Channel 2/ Left and Channel 1/ Right. Channel 2/L / Channel 1/R speaker output
connections]. PoWeR ConTRoL jacks: IN and OUT. Fuse holder / Power cord
receptacle.

© 2007-2020 VintageMac – Larry Hodson Rev. 09/19 Page 1 / 2


MI 128
8 CHANNEL POWER AMPLIFIER The Compendium

SPECIFICATIONS: Power Output: 120w/channel into an 8ohm load; 150w/channel


into a 4 ohm load. Output Load Impedance: 8 and 4 ohms. Rated Power Band:
20-20,000Hz. Total Harmonic Distortion: 0.05% maximum at any power level
from 250 milliwatts to rated power, 20Hz to 20,000Hz. Dynamic Headroom:
2.1dB, 8 ohm load; 3.3dB, 4 ohm load. Frequency Response: +0,-0.5dB from
20Hz to 20,000Hz. Input Sensitivity for rated output: 1.6 Volt Unbalanced (8
ohm Loudspeaker); 1.3 Volt Unbalanced (4 ohm Loudspeaker). Signal to Noise
Ratio (A-Weighted): 85dB (95dB below rated output). Intermodulation
Distortion: 0.2% maximum if the instantaneous peak power output does not exceed
the rated power output for any combination of frequencies from 20Hz to 20,000Hz.
Wide Band Damping Factor: Greater than 65, 8 ohm load; greater than 32, 4 ohm
load. Input Impedance: 26,000 ohms Unbalanced. Voltage Gain: 29dB. Power
Control Input: 5-15VDC, less than 1mA. Power Control Output: 12VDC, 50mA
maximum total. Sentry Monitor. Loudspeaker Guard. Power Requirements: 120V
at 10 Amps. Comes with optional Side Rack Mount Brackets for rack mounting.

Can be used for multi-room distributed audio, home theater or 2-channel stereo playback.

MI 128 - Sold from December 2018 - Current. S/N: ???1001~???????


Size: 4-5/16"H, 17-1/2"W (19” with Side Rack Mount Brackets) and 21"D. Weight: 22 lb.
$

© 2007-2020 VintageMac – Larry Hodson Rev. 09/19 Page 2 / 2

You might also like