View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

M/s. Abdul Hakim

Bill of Quantities

Bill of Quantities

Unit Total
Unit Total
Price Price
Price Price
ItemNo Group ItemCode DescriptionofItem MeasurementUnit Quantity
In In
In Words In Words
figures Figures
(BDT) (BDT)
(BDT) (BDT)

Supply of High, Low

combined Bench with Book
shelf for Primary School: (A).
High Bench with Book shelf:
Size : 1.450m-(L) x
0.425m(W)x0.730m(H) with
plastic top wall thickness
5mm with side wall 25mm
height, wall thickness 5mm,
Plastic frame weight 5000 gm,
Vertical Ribs 25 nos,
Horizontal Ribs 7 nos ,Rib
height 12mm and thickness
4mm, Plastic top rib sunk
size: 6 to 8mm dia for
provided screw 38mm dia @
180mm c/c long direction and
75mm c/c short direction fitted
with steel frame size: 1.435m
x0.372m x0.713m made of
25mm MS square box , Steel
frame for footing bracing
made of 38mm MS Square
box with same materials,
Book shelf fitted with 150mm
below top frame with same
materials and 5mm guide Rod
15 nos at back side and 2 nos Eight Two Lakh
each at left and right side Thousand Ninety-Eight
welded with 25mm x 25mmx Two Thousand
Furniture 2mm MS Angle as shown in Hundred Five
1 and 11.01.06 drawing, Stopper should be set 36.000 8292.001 298512.036
and Hundred
Fixtures anchored by raised thread. Ninety-Two and Twelve
(B). Low Bench: Size : point Zero point Zero
1.395m- Zero One Three Six
(L)x0.305m(W)x0.380m(H)
with plastic top wall thickness
5mm with side wall 25mm
height, wall thickness 5mm,
Plastic frame weight 3000 gm,
Vertical Ribs 21 nos,
Horizontal Ribs 7 nos, Rib
height 12mm and thickness
4mm, Plastic top rib sunk size
6 to 8mm dia for provided
screw 38mm dia @ 180mm
c/c long direction and 75mm
c/c short direction fitted with
steel frame size: 1.325m
x0.270m x0.363m made of
25mm MS square box. Steel
frame for footing bracing
made of 38mm MS Square
box, Stopper should be
anchored by raised thread as
shown in the drawing (if
provided) including cost of
fabricating, cutting, welding,
painting etc. all Complete as
per the drawing and direction
of the E-I-C. (Rate is inclusive
of delivering the furniture at

1 of 4 7/12/20, 10:18 PM
View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

the selected school). BUET

test: Physical strength,
Breaking strength of
Polypropylene impact co
Polymer Plastic frame: i)
Hardness, Rock well, ii)
Tensile strength High and Low
Bench for every 1000 nos
set/pair or part there of one
test for each type of
comprising average of 2 (Two)
sample. all complete

Teacher Table:Supply Primary

school teachers Table as per
below specification Table top
Raw materials
:-Polypropylene Impact
Copolymer Plastic Size : -
838mm(L) x 533mm(W) x
775mTable Top: Dimen
838mm(L) x 533mm(W) x
25mm(T) Colour: Deep blue,
Brick Red, Black, Orange
Plastic Top Weight : 5000gm
Steel tube Specification
25mm x 25mm x1.2mm Steel
frame Dimension 785mm(L) x
470mm(W) x 750mm Drawer:
Two drawer fixed right side,
made by high quality 12mm
melamine laminated board
with two side covered by
12mm laminated board and
Back side covered by 3mm
thick ply wood.
Size:300mmx300mm Other
Manufacturing and Supplying
teachers table will be made of
non-toxic Polypropylene
impact Copolymer Plastic and
Legs are structure made of
Seventeen
ms Round tube -25mm x Five
Thousand
1.2mm(22x1.2mm), welded ( Thousand
One
Furniture 0.5'' weld length @ 2'' c/c Seven
Hundred
2 and 11.01.07 continuously through the MS each 3.000 5708.001 Hundred 17124.003
and
Fixtures tube), cold bended & formed and Eight
Twenty-Four
strictly as per drawing. The point Zero
point Zero
frame of table must be Zero One
Zero Three
cleaned in 07(seven) stage
tank with phosphate chemical
method pure along with
polyester powder coating for
pre-head at 230ºC for 22
minutes in heat heaven for
curing the paint. Finishing
including assembling of all
components and best quality
PVC stoppers necessary
number and type of nuts and
bolts and packing shall be
used as shown in the design.
Bottom of legs will be
provided with PVC cap/shoe
as per drawing. Plastic frame
top installation : The
Polypropylene Impact
Copolymer plastic frame top
will be tied with MS steel
frame (25mm X 378MM and
thick1.2mm ) by 1 micron
electroplated (No-16) X 4 and
50mm star head Countersunk
screw at a distance 75 and
180mm c/c. BUET test:
Physical strength, Breaking
strength of Polypropylene

2 of 4 7/12/20, 10:18 PM
View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

impact co Polymer Plastic

frame: i) Hardness, Rock well,
ii) Tensile strengthAll
complete as per direction of
the E-I-C.

Teacher Chair:Size
550mm(L)x515mm(W)x850m
(H)Chair seat Raw materials
:- Polypropylene Impact
copolymerChair top Specific
on
465mm(L)x480mm(W)x425m
(H)Plastic weight 174 Chair
colour Deep blue, Brick red,
black, OrSteel tu,
Specification Round tube
-25mm x 1.2mm, Steel frame
Dimension 550mm(L) x
515mm(W) x
47Manufacturing & Supplying
teacher chair made of
Polypropylene Impact
Copolymer Plastic and Legs
are structure made of MS
Round tube -25mm x 1.2mm
(22x1.2 mm), welded (0.5''
weld length@2 `` C/C
continuously through the MS
tube), cold bended & formed
One
strictly as per drawing. The
Thousand Four
frame of chair must be
Five Thousand
Furniture cleaned in 07 (seven) stage
Hundred Six Hundred
3 and 11.01.08 tank with phosphate chemical each 3.000 1536.001 4608.003
and and Eight
Fixtures method pure along with
Thirty-Six point Zero
polyester powder coating for
point Zero Zero Three
pre-head at 230ºc for 22
Zero One
minutes in heat oven for
curing the paint to make the
permanentof color of steel
frame. Finishing including
assembling of all components
and best quality PVC
stoppers necessary number
and type of nuts and bolts and
packing shall be used as
shown in the same must be
supplied and get approval
from Upazila
Engineer/Executive Engineer
before manufacturing of the
lot. Bottom of legs will be
provided with PVC cap/shoe
as per drawing BUET test:
Physical strength, Breaking
strength of Polypropylene
impact co Polymer Plastic
frame: i) Hardness, Rock well,
ii) Tensile strength All
complete as per direction of
the E-I-C.

Supply of furniture for Primary

School Supplying Steel
Almirah (Size :
1.8mx0.9mx0.675m) with
required number of drawers,
Nineteen Nineteen
made of 18 BWG MS sheet at
Thousand Thousand
front and two parallel sides
Furniture One One
and 20 BWG MS sheet at
4 and 11.01.05 each 1.000 19150.001 Hundred 19150.001 Hundred
back side as per approved
Fixtures and Fifty and Fifty
design and specification in/c
point Zero point Zero
superior quality painting with
Zero One Zero One
synthetic
(BERGER/equivalent) enamel
paint in/c welding, plane
surfacing, denting points,
fitting and fixing standard lock

3 of 4 7/12/20, 10:18 PM
View Form https://www.eprocure.gov.bd/resources/common/ViewBOQForms.jsp?fo...

with two sets of keys and also

lock in drawers etc. all
complete as per direction of
the E-I-C. (Rate is inclusive of
delivering the furniture at the
selected school).

One One
Hundred Hundred
Additional and and
5 N.S.I.04 Unforeseen Works LS 1.000 194.001 194.001
Item Ninety-Four Ninety-Four
point Zero point Zero
Zero One Zero One

Three Lakh
Thirty-Nine
Thousand
Five
Grand
339588.044 Hundred
Total:
and
Eighty-Eight
point Zero
Four Four

This Bill of Quantities is Electronically Signed by Ms. Abdul Hakim on behalf of M/s. Abdul Hakim

4 of 4 7/12/20, 10:18 PM