Altaflo Maincatalog v20

HIGH PERFORMANCE FLUOROPOLYMER AND
FLUOROPLASTIC TUBING AND PIPE
TRANSPORT CRITICAL
FLUID WITH CONFIDENCE
P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

F: 973-300-3345 TEFLON™ is a brand of Chemours
E: [email protected], [email protected] NEOFLON® is a registered trademark of Daikin
A: 23 Wilson Drive, Sparta, NJ 07871 KYNAR® and KYNAR FLEX® are registered trademarks of Arkema Inc.
INDEX
ALTAFLUOR® 100 PTFE 3
ALTAFLUOR® 200 FEP 5
ALTAFLUOR® 2E0 FEP ENVIRO 8
ALTAFLUOR® 350 THV FLEX 9
ALTAFLUOR® 400 PFA 10
ALTAFLUOR® 450 HP PFA 13
ALTAFLUOR 450 SERIES DCHP DUAL CONTAINMENT HP PFA

TUBING 16
ALTAFLUOR® 480 UHP PFA 17
ALTAFLUOR® DUAL CONTAINMENT TUBING UHP PFA 20
ALTAFLUOR® 500 PVDF 21
ALTAFLUOR® 550 PVDF FLEX 22
COILED HOSE ORDER FORM 24
ALTAFLO MATERIAL SELECTION CHART 25

PTFE (polytetrafluoroethylene) was first developed by the E.I. DuPont Co. PTFE is the most flexible of all fluoropolymers offered. ALTAFLUOR® 100 PTFE has the broadest temperature range of any
fluoropolymer and can resist highly corrosive liquids and gases even at elevated temperatures. The smooth surface finish and lowest coefficient of friction and lubricity make it ideal for bushing or
bearing applications. Lengths may be limited due to batch size - please call to confirm available lengths at time of order. ALTAFLUOR® 100 is compatible with most standard fittings (not suitable for
use with flare-type fittings).
ALTAFLUOR® 100 FEATURES ALTAFLUOR® 100 PTFE - TUBING
• 100% virgin grade PTFE resins • Lowest coefficient of friction PART NUMBER ID OD +/- WALL +/-
• Most flexible fluoropolymer • Excellent electrical properties Industrial Wall
100-0052-015-XX 1/32 1/16 .003 0.015 .003
• Chemically inert and resistant to • Non-Flammable
100-0094-030-XX 1/32 3/32 .005 0.03 .005
nearly all industrial chemicals • Non-Toxic 100-0125-030-XX 1/16 1/8 .005 0.03 .005
and solvents
• FDA Compliant 100-0188-030-XX 1/8 3/16 .005 0.03 .005
• Low permeability 100-0250-030-XX 3/16 1/4 .005 0.03 .005
• Suitable for use with
• Smooth non-stick surface finish 100-0313-030-XX 1/4 5/16 .005 0.03 .005
conventional fittings
100-0375-030-XX 5/16 3/8 .005 0.03 .005
APPLICATIONS 100-0500-030-XX 7/16 1/2 .005 0.03 .005
Custom Wall
• Laboratory • Cryogenic applications 100-0250-047-XX 5/32 1/4 .005 0.047 .005
• Chemical Process • Electrical applications 100-0250-040-XX 0.17 1/4 .005 0.04 .005
Heavy Wall
• Analytical and process • High Temperature applications
100-0250-062-XX 1/8 1/4 .005 0.062 .005
equipment • Automotive 100-0313-062-XX 3/16 5/16 .005 0.062 .005
100-0375-062-XX 1/4 3/8 .005 0.062 .005
SPECIFICATIONS
100-0500-062-XX 3/8 1/2 .005 0.062 .005
General: Meets or exceeds the requirements listed in ASTM D 3295 (except Metric
for dimensional on specific items) 100-0157-040-XX 2mm 4mm 1mm
Temperature: -410° F to 500° F continuous / 550° F short-term 0.079 157 .005 0.04 .005
Flammability: PTFE tubing resists combustion and does not promote flame 100-0236-040-XX 4mm 6mm 1mm
spread. PTFE resin used for production of ALTAFLUOR® 100 series is UL 94 0.157 0.236 .005 0.04 .005
100-0315-040-XX 6mm 8mm 1mm
VO rated
0.236 0.315 .005 0.04 .005
FDA: PTFE is approved for use in food contact applications in compliance
100-0394-040-XX 8mm 10mm 1mm
with FDA regulation: 21 CFR 177.1550
0.315 0.394 .005 0.04 .005
100-0472-040-XX 10mm 12mm 1mm
0.394 0.472 .005 0.04 .005
100-0354-059-XX 6mm 9mm 1.5mm
0.236 0.354 .005 0.59 .005
Stocked in natural color - please consult factory for details on available colors.

E: [email protected] NEOFLON® is a registered trademark of Daikin
Due to the nature of applications involving the use of fluoropolymers, we suggest that all customers test product within the conditions specific to their application prior to use.
ALTAFLUOR® 100 PTFE - BEND RADIUS AND WORKING PRESSURE CHART
PART NUMBER ID OD WALL BEND RADIUS WORKING PRESSURE @ 73°F

Industrial Wall
100-0052-015-XX 1/32 1/16 0.015
100-0094-030-XX 1/32 3/32 0.030
100-0125-030-XX 0.062 0.125 0.030 1/2” 443
100-0188-030-XX 0.125 0.188 0.030 3/4” 254
100-0250-030-XX 0.188 0.250 0.030 1” 172
100-0313-030-XX 0.250 0.313 0.030 1-3/4” 120
100-0375-030-XX 0.313 0.375 0.030 1-3/4” 100
100-0500-030-XX 0.438 0.500 0.030 6” 71
Custom Wall
100-0250-040-XX 0.170 0.250 0.040 1” 310
100-0250-047-XX 0.156 0.250 0.047 3/4” 360
Heavy Wall
100-0250-062-XX 0.125 0.250 0.062 1/2” 398
100-0313-062-XX 0.188 0.313 0.062 1” 356
100-0375-062-XX 0.250 0.375 0.062 3/4” 248
100-0500-062-XX 0.375 0.500 0.062 2-1/2” 150
Metric
100-0157-040-XX 0.079 0.157 0.04 3/4" 455
2mm 4mm 1mm
100-0236-040-XX 0.157 0.236 0.040 1” 208
4mm 6mm 1mm
100-0315-040-XX 0.236 0.315 0.040 1-1/2” 156
6mm 8mm 1mm
100-0394-040-X X 0.315 0.394 0.040 2” 125
8mm 10mm 1mm
100-0472-040-XX 0.394 0.472 0.040 4” 104
The above information is based on tests performed at 73° F and can vary in individual applications based on parameters such as temperature, chemical concentration, pressure, etc. Please consult factory for details.
For an estimate on burst pressure at ambient temperature we consider a 3:1 ratio when exposure temperature is 73° F. However Altaflo does not recommend exceeding the suggested Working Pressure listed.
ALTAFLUOR® 100 PTFE - PHYSICAL PROPERTIES
PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES

Upper Service Temp. Long Term 500° F
Upper Service Temp. Short Term 550° F
Specific Gravity D 792 2.15
Tensile Strength D 1708 PSI 2500-3000
Elongation D 638 % 200-400
Flex Modulus D 790 PSI 27,000
MIT Flex Life D 2176 1,000,000+
Hardness D 2240 Shore D 60

FEP (fluorinated ethylene propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. ALTAFLUOR® 200 FEP offers excellent
clarity, which makes it ideal for sight glass/flow monitoring applications. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV water purification systems.
ALTAFLUOR® 200 tubing may be used with flare or conventional fittings.
ALTAFLUOR® 200 FEATURES ALTAFLUOR® 200 - FEP TUBING
• 100% virgin grade high • Moisture absorption nearly zero PART NUMBER ID OD +/- WALL +/-
performance resins used to • FDA compliant for food contact Industrial Wall
resist stress cracking 200-0062-015-XX 1/32 1/16 .003 0.015 .003
• Non-flammable
• Chemically inert to most 200-0125-030-XX 1/16 1/8 .004 0.030 .003
• Superior electrical insulation 200-0156-030-XX 3/32 5/32 .004 0.030 .003
industrial chemicals and solvents
properties 200-0188-030-XX 1/8 3/16 .004 0.030 .003
• High thermal stability
• Available in coiled hose, 200-0250-030-XX 3/16 1/4 .004 0.030 .003
• Excellent UV transmission convoluted and heat-shrink 200-0313-030-XX 1/4 5/16 .005 0.030 .003
• Low permeability constructions 200-0375-030-XX 5/16 3/8 .005 0.030 .003
200-0438-030-XX 3/8 7/16 .005 0.030 .003
APPLICATIONS 200-0500-030-XX 7/16 1/2 .005 0.030 .003
200-0562-030-XX† 1/2 9/16 .005 0.030 .003
• Chemical process • Food processing
200-0625-030-XX† 9/16 5/8 .005 0.030 .003
• Laboratory applications • Electrical Insulation 200-0688-030-XX† 5/8 11/16 .005 0.030 .003
• UV water purification systems • Automotive 200-0750-030-XX† 11/16 3/4 .005 0.030 .003
Heavy Wall
• Ground water monitoring
200-0188-062-XX 1/16 3/16 .005 0.062 .003
SPECIFICATIONS 200-0250-062-XX 1/8 1/4 .005 0.062 .003
200-0313-062-XX 3/16 5/16 .005 0.062 .003
General: Meets or exceeds the requirements listed in ASTM D 3296 and 200-0375-062-XX 1/4 3/8 .005 0.062 .003
ASTM D 2116 200-0438-062-XX 5/16 7/16 .005 0.062 .003
Temperature: -100°F to 400°F 200-0500-062-XX 3/8 1/2 .005 0.062 .003
Flammability: FEP resists combustion and does not promote flame spread 200-0625-062-XX 1/2 5/8 .005 0.062 .003
FDA: ALTAFLUOR® 200 FEP is approved for use in food contact applications 200-0750-062-XX 5/8 3/4 .005 0.062 .003
in compliance with FDA regulation: 21 CFR 177.1550 200-0875-062-XX† 3/4 7/8 .005 0.062 .003
USP CLASS VI: ALTAFLUOR® 200 FEP meets the requirements of USP 200-1000-062-XX* 7/8 1 .005 0.062 .003
Class VI 200-1125-062-XX* 1 1-1/8 .006 0.062 .003
NSF: ALTAFLUOR® 200 FEP tubing is certified to NSF 51, NSF 61 and NSF 200-1250-062-XX** 1-1/8 1-1/4 .006 0.062 .003
372 200-1375-062-XX** 1-1/4 1-3/8 .008 0.062 .003
200-1500-062-XX**† 1-3/8 1-1/2 .010 0.062 .003
This ALTAFLUOR® 200 FEP has been tested and
200-1625-062-XX**† 1-1/2 1-5/8 .012 0.062 .003
certified by WQA against NSF/ANSI 51, NSF/ANSI 61 to
200-1750-062-XX†** 1-5/8 1-3/4 .015 0.062 .003
Commercial Hot (180° F/82° C), and NSF/ANSI 372 for
200-2000-062-XX**† 1-7/8 2 .015 0.062 .003
lead free compliance.
200-2125-062-XX**† 2 2-1/8 .015 0.062 .003
Stock Custom Size
200-0250-040-XX .170 1/4 .004 0.040 .003
200-0250-047-XX .156 1/4 .004 0.047 .003
200-0375-047-XX .281 3/8 .015 0.047 .003
200-1100-050-XX* 1 1.10 .010 0.050 .003
* Straight length or reels
** Straight lengths only
† Custom item - please consult factory for lead time and minimum order requirements.
Additional sizes up to 4” OD are available as custom extrusions - minimum order requirements may apply. Please contact
Altaflo office for details. Stocked in natural color - please consult factory for details on available colors.

ALTAFLUOR® 200 - FEP TUBING ALTAFLUOR® 200 FEP - BEND RADIUS AND WORKING PRESSURE CHART
PART NUMBER ID OD +/- WALL +/- PART NUMBER OD WALL ID BEND RADIUS WORKING PRESSURE @ 73°F
Metric Sizes 200-0125-030-XX 0.125 0.030 0.062 1/2” 445
200-0156-030-XX .079 .157 .005 1mm .003 200-0156-030-XX 0.156 0.030 0.094 1/2” 357
2mm 4mm 0.040 200-0188-030-XX 0.188 0.030 0.125 3/4” 296
200-0197-040-XX† .118 .197 .005 1mm .003 200-0188-062-XX 0.188 0.062 0.062 1/2” 612
3mm 5mm 0.040 200-0250-030-XX 0.250 0.030 0.188 1” 223
200-0236-040-XX .157 .236 .005 1mm .003 200-0250-040-XX 0.250 0.040 0.170 1” 297
4mm 6mm 0.040 200-0250-047-XX 0.250 0.047 0.157 3/4” 349
200-0276-040-XX† .197 .276 .005 1mm .003 200-0250-062-XX 0.250 0.062 0.125 1/2” 460
5mm 7mm 0.040 200-0313-030-XX 0.313 0.030 0.250 1-3/4” 178
200-0315-040-XX .236 .315 .005 1mm .003 200-0313-062-XX 0.313 0.062 0.188 1” 368
6mm 8mm 0.040 200-0375-030-XX 0.375 0.030 0.313 2-1/2” 148
200-0375-062-XX 0.375 0.062 0.250 1” 307
200-0354-040-XX† .276 .354 .005 1mm .003
200-0438-030-XX 0.438 0.030 0.375 3-1/2” 127
7mm 9mm 0.040
200-0438-062-XX 0.438 0.062 0.313 2" 263
200-0394-040-XX .315 .394 .005 1mm .003
200-0500-030-XX 0.500 0.030 0.438 6” 111
8mm 10mm 0.040
200-0500-062-XX 0.500 0.062 0.375 2” 230
200-0433-040-XX† .354 .433 .005 1mm .003
200-0625-030-XX 0.625 0.030 0.562 6-1/2” 89
9mm 11mm 0.040
200-0625-062-XX 0.625 0.062 0.500 3” 184
200-0472-040-XX .394 .472 .005 1mm .003
200-0750-030-XX 0.750 0.030 0.688 8” 74
10mm 12mm 0.040
200-0750-062-XX 0.750 0.062 0.625 6” 153
200-0512-040-XX† .433 .512 .005 1mm .003
200-0875-062-XX 0.875 0.062 0.750 12” 132
11mm 13mm 0.040 200-1000-062-XX 1.000 0.062 0.875 22” 115
200-0551-040-XX .472 .551 .005 1mm .003 200-1125-062-XX 1.125 0.062 1.000 30” 75
12mm 14mm 0.040 200-1250-062-XX 1.250 0.062 1.125 N/A 70
200-0630-040-XX .551 .630 .005 1mm .003 Metric Sizes
14mm 16mm 0.040 200-0157-040-XX .157 1mm .079 1-1/2” 464
200-0354-059-XX† .236 .354 .005 1.5mm .003 4mm 0.040 2mm
6mm 9mm 0.059 200-0197-040-XX† .197 1mm .118 1-3/4” 309
200-0472-059-XX† .354 .472 .005 1.5mm .003 5mm 0.040 3mm
9mm 12mm 0.059 200-0236-040-XX .236 1mm .157 2-1/2” 232
* Straight length or reels 6mm 0.040 4mm
** Straight lengths only 200-0276-040-XX† .276 1mm .197 2-3/4” 186
† Custom item - please consult factory for lead time and minimum order requirements. 7mm 0.040 5mm
Additional sizes up to 4” OD are available as custom extrusions - minimum order 200-0315-040-XX .315 1mm .236 4” 155
requirements may apply. Please contact Altaflo office for details. Stocked in natural color - 8mm 0.040 6mm
please consult factory for details on available colors. 200-0354-040-XX† .354 1mm .276
9mm 0.040 7mm
200-0394-040-XX .394 1mm .315
10mm 0.040 8mm
200-0433-040-XX† .433 1mm .354
11mm 0.040 9mm
200-0472-040-XX .472 1mm .394
12mm 0.040 10mm
200-0512-040-XX† .512 1mm .433
13mm 0.040 11mm
200-0551-040-XX .551 1mm .472
14mm 0.040 12mm
200-0630-040-XX .630 1mm .551
16mm 0.040 14mm
200-0354-059-XX† .354 1.5mm .236
9mm 0.059 6mm
200-0472-059-XX† .472 1.5mm .354
12mm 0.059 9mm

ALTAFLUOR® 200 SERIES FEP - PHYSICAL PROPERTIES

NOTE: The values represented are
based on the use of 100% virgin
Upper Service Temp. 400° F
grade high performance - low
melt flow FEP resin as used in the
Tensile Strength D 1708 PSI 4000
production of ALTAFLUOR® 200
Elongation D 638 % 400
Flex Modulus D 790 PSI 90,000 Series Tubing. When comparing data
MIT Flex Life D 2176 200,000 it is critical that performance values
Hardness D 2240 Shore D 57-60 are listed for the grade of resin used.
ALTAFLUOR® 200 FEP - TUBING ALTAFLUOR® 200 FEP - SCHEDULE 40 PIPE
PART NUMBER ID OD +/- WALL +/- PART NUMBER NOMINAL SIZE ACTUAL SIZE WALL STOCK LENGTH
METRIC SIZES
200-0540-088-0C 1/4" .540" ± .010 .088"±.020,-0 10 FT
200-0156-030-XX .079 .157 1mm
2mm 4mm .005 0.040 .003 200-0840-109-0C 1/2" .840" ± .010 .109"±.020,-0 10 FT
200-0197-040-XX .118 .197 1mm 200-1050-113-0C 3/4" 1.050" ± .010 .113"±.020,-0 10 FT
3mm 5mm .005 0.040 .003 200-1315-133-0C 1" 1.315" ± .010 .133"±.020,-0 10 FT
200-0236-040-XX .157 .236 1mm 200-1660-140-0C* 1-1/4" 1.660" ± .015 .140"±.020,-0 10 FT
4mm 6mm .005 0.040 .003 200-1900-145-0C* 1-1/2" 1.900" ± .015 .145"±.020,-0 10 FT
200-0276-040-XX .197 .276 1mm 200-2375-154-0C* 2" 2.374" ± .015 .154"±.020,-0 10 FT
5mm 7mm .005 0.040 .003
*Custom item - please consult factory for lead time and minimum order requirements. Additional sizes
200-0315-040-XX .236 .315 1mm
6mm 8mm .005 0.040 .003 and Schedule 80 Pipe available upon request.
200-0354-040-XX .276 .354 1mm
7mm 9mm .005 0.040 .003 ALTAFLUOR® 200 FEP - COILED HOSE
200-0394-040-XX .315 .394 1mm
8mm 10mm .005 0.040 .003
200-0433-040-XX .354 .433 1mm
9mm 11mm .005 0.040 .003
200-0472-040-XX .394 .472 1mm
10mm 12mm .005 0.040 .003
200-0512-040-XX .433 .512 1mm
11mm 13mm .005 0.040 .003
200-0551-040-XX .472 .551 1mm
12mm 14mm .005 0.040 .003 Custom item - see Coiled Hose Order Form for ordering information. Please consult factory for
200-0630-040-XX .551 .630 1mm additional details.
14mm 16mm .005 0.040 .003
200-0354-059-XX .236 .354 1.5mm
6mm 9mm .005 0.059 .003 Additional sizes up to 4” OD are available as custom extrusions - minimum order requirements may
200-0472-059-XX .354 .472 1.5mm apply. Please contact Altaflo office for details. Stocked in natural color - please consult factory for details
9mm 12mm .005 0.059 .003 on available colors.
ALTAFLUOR® 200 FEP - STANDARD CONVOLUTED CONSTRUCTION
PART NUMBER NOMINAL OD SIZE ID MIN ID MAX OD MAX NOMINAL WALL CONVOLUTIONS PER INCH
20C-0375-020-XX* 3/8 0.251 0.275 0.375 0.020 6
20C-0500-023-XX* 1/2 0.364 0.375 0.500 0.023 6
20C-0625-025-XX* 5/8 0.485 0.500 0.625 0.025 5.5
20C-0750-025-XX* 3/4 0.608 0.625 0.750 0.025 5
20C-0875-025-XX* 7/8 0.730 0.750 0.875 0.025 4
20C-1000-025-XX* 1 0.860 0.875 1.000 0.025 3.5
*Custom item - please consult factory for lead time and minimum order requirements. Please see ALTAFLUOR® 200 Ultra-Flex for stock items.
ALTAFLUOR® 200 FEP - ULTRA FLEX CONVOLUTED CONSTRUCTION
20U-0375-020-XX 3/8 0.251 0.275 0.375 0.020 9
20U-0500-023-XX 1/2 0.364 0.375 0.500 0.023 9
20U-0625-025-XX 5/8 0.485 0.500 0.625 0.025 9
20U-0750-025-XX 3/4 0.608 0.625 0.750 0.025 8
20U-1000-025-XX 1 0.860 0.875 1.000 0.025 8

ALTAFLUOR® 2E0 FEP ENVIRO 8
ALTAFLUOR® 2E0 ENVIRO SERIES FEP (fluorinated ethylene propylene), is designed specifically for use in environmental sampling applications. This cost effective choice is the preferred product for
applications requiring the purity of FEP without exposure to aggressive chemical or other harsh conditions. ALTAFLUOR® 2E0 Series FEP does not impart taste, odor or other contaminants. For more
critical application requirements, we suggest the use of ALTAFLUOR® 200 FEP or ALTAFLUOR® 400 PFA Tubing.
ALTAFLUOR® 2E0 FEATURES ALTAFLUOR® 2E0 FEP ENVIRO - ENVIRO TUBING
• Excellent UV transmission • Moisture absorption nearly zero PART NUMBER ID OD +/- WALL +/-
• Low permeability • Does not impart taste, odor or 2E0-0250-030-XX 3/16 1/4 .005 .030 .003
contaminants 2E0-0313-030-XX 1/4 5/16 .005 .030 .003
• High thermal stability
2E0-0375-030-XX 5/16 3/8 .005 .030 .003
• Excellent clarity • Non-flammable
2E0-0500-030-XX 7/16 1/2 .005 .030 .003
APPLICATIONS
2E0-0250-040-XX .170 1/4 .005 .040 .003
• Ground water monitoring • Water process
2E0-0375-062-XX 1/4 3/8 .005 .062 .003
• Air sampling • UV water purification systems
2E0-0500-062-XX 3/8 1/2 .005 .062 .003
• Laboratory applications
SPECIFICATIONS Altaflo office for details. This tubing is not recommended for aggressive chemical applications - please refer to ALTAFLUOR® 200
or ALTAFLUOR® 400.
General: FEP meets the requirements listed in ASTM D2116
Temperature: -100°F to 400°F ALTAFLUOR® 2E0 FEP ENVIRO - BEND RADIUS AND WORKING PRESSURE CHART
Flammability: FEP is non-combustible and does not promote flame spread
PART NUMBER OD WALL ID BEND RADIUS WORKING PRESSURE @ 73°F
2E0-0250-030-XX 0.188 0.250 .030 1” 195
2E0-0313-030-XX 0.250 0.313 .030 1-3/4” 156
2E0-0375-030-XX 0.313 0.375 .030 2-1/2” 130
2E0-0500-030-XX 0.438 0.500 .030 6” 97
2E0-0250-040-XX 0.170 0.250 .040 1” 260
2E0-0375-062-XX 0.250 0.375 .062 1” 269
2E0-0500-062-XX 0.375 0.500 .062 2” 200
The above information is based on tests performed at 73° F and can vary in individual applications based on parameters such
as temperature, chemical concentration, pressure, etc. Please consult factory for details. For an estimate on burst pressure
at ambient temperature we consider a 3:1 ratio when exposure temperature is 73° F. However Altaflo does not recommend
exceeding the suggested Working Pressure listed.
ALTAFLUOR® 2E0 FEP ENVIRO - PHYSICAL PROPERTIES

Specific Gravity D 792 2.12-2.17
MIT Flex Life D 2176 5000
Hardness D 2240 Shore D 57-60

ALTAFLUOR® 350 THV FLEX 9
THV FLEX (tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride) has a unique combination of properties making it the preferred choice for many applications. THV is ideal for use in
applications requiring excellent UV light transmission combined with the safety and flexibility of plastic. THV FLEX grade has the flexibility of traditional PVC flex tubing combined with chemical
resistance much closer to that of FEP. THV is available in a variety of compositions each designed for specific performance values. ALTAFLUOR® 300 Series uses THV FLEX grade, which allows for
greatest flexibility, permeation resistance and good chemical resistance, but with slightly reduced upper service temperature over other grades. ALTAFLUOR® 350 also has excellent bondability with
other materials, which allows for multi-layer extrusions. For more product specific information please contact your ALTAFLO representative.
ALTAFLUOR® 350 FEATURES ALTAFLUOR® 350 THV FLEX - TUBING
• 100% virgin grade THV FLEX • Good chemical resistance PART NUMBER ID OD +/- WALL +/-
grade • Superior weatherability 350-0250-030-0C 3/16 1/4 .004 0.030 .003
• Highest UV and visible 350-0250-040-0C .170 1/4 .004 0.040 .003
• Excellent bondability
light transmission of any 350-0250-062-0C 1/8 1/4 .005 0.062 .003
• Excellent ozone resistance 350-0375-062-0C 1/4 3/8 .005 0.062 .003
fluoropolymer
• Extremely low permeation
• Most flexible fluoropolymer Additional sizes are available as custom items - minimum order requirements may apply. Please consult factory for additional
sizes and availability.
APPLICATIONS
ALTAFLUOR® 350 THV FLEX - BEND RADIUS AND WORKING PRESSURE CHART
• Laboratory • Fiber optic
• Solar energy • Chemical process
350-0250-030-0C 0.250 0.030 0.188 1" 223
• UV purification systems 350-0250-040-0C 0.250 0.040 0.170 1" 297
350-0250-062-0C 0.250 0.062 0.125 1/2" 460
SPECIFICATIONS
350-0375-062-0C 0.375 0.062 0.250 1" 307
Temperature: -40 °F to 212 °F
Flammability: THV Flex grade resin is UL 94 VO rated. THV FLEX grade
resists combustion and does not promote flame spread at ambient temperature we consider a 3:1 ratio when exposure temperature is 73° F. However Altaflo does not recommend
ALTAFLUOR® 350 SERIES THV FLEX - PHYSICAL PROPERTIES

Elongation D 600
MIT Flex Life N/A

PFA (perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high temperature exposure. Although PFA is available in a variety of resin
grades, ALTAFLUOR® 400 PFA tubing is made exclusively from the highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding
applications. ALTAFLUOR® 400 is compatible with flare or conventional type fittings.
ALTAFLUOR® 400 FEATURES ALTAFLUOR® 400 PFA - TUBING
• 100% virgin grade high • Moisture absorption nearly zero PART NUMBER ID OD +/- WALL +/-
performance resins used to • FDA compliant for food contact 400-0062-015-XX 1/32 1/16 .003 0.015 .003
resist stress cracking 400-0125-030-XX 1/16 1/8 .004 0.030 .003
• Non-flammable
• Chemically inert to nearly all 400-0156-030-XX 3/32 5/32 .004 0.030 .003
• Suitable for use with flare or 400-0188-030-XX 1/8 3/16 .004 0.030 .003
industrial chemicals and solvents
conventional fittings 400-0250-030-XX 3/16 1/4 .004 0.030 .003
• Higher thermal stability than
• Available in coiled hose and 400-0313-030-XX 1/4 5/16 .005 0.030 .003
with FEP
convoluted constructions 400-0375-030-XX 5/16 3/8 .005 0.030 .003
• Lower permeability than with FEP 400-0438-030-XX 3/8 7/16 .005 0.030 .003
• Higher upper surface
• Translucent 400-0500-030-XX 7/16 1/2 .005 0.030 .003
temperature vs. FEP
400-0562-030-XX* 1/2 9/16 .005 0.030 .003
APPLICATIONS 400-0625-030-XX* 9/16 5/8 .005 0.030 .003
400-0688-030-XX* 5/8 11/16 .005 0.030 .003
• Chemical process • Flow monitoring 400-0750-030-XX* 11/16 3/4 .005 0.030 .003
• Heat exchangers • Food processing
400-0250-040-XX .170 1/4 .004 0.040 .003
• Laboratory applications • Electrical insulation
• Semiconductor • Automotive 400-0250-047-XX .156 1/4 .004 0.047 .003
SPECIFICATIONS
400-0188-062-XX 1/16 3/16 .005 0.062 .003
General: Meets or exceeds the requirements listed in ASTM D 6867-03 400-0250-062-XX 1/8 1/4 .005 0.062 .003
Temperature: -300 °F to 500 °F 400-0375-062-XX 1/4 3/8 .005 0.062 .003
Flammability: UL 94 VO rated. PFA resists combustion and does not 400-0438-062-XX 5/16 7/16 .005 0.062 .003
promote flame spread 400-0500-062-XX 3/8 1/2 .005 0.062 .003
FDA: ALTAFLUOR® 400 PFA is approved for use in food contact applications 400-0625-062-XX 1/2 5/8 .005 0.062 .003
400-0750-062-XX 5/8 3/4 .005 0.062 .003
in compliance with FDA regulation: 21 CFR 177.1550
400-0875-062-XX* 3/4 7/8 .005 0.062 .003
USP CLASS VI: ALTAFLUOR® 400 meets the requirements of USP Class VI
400-1000-062-XX 7/8 1 .005 0.062 .003
NSF: ALTAFLUOR® 400 PFA tubing is certified to NSF 51, NSF 61 and NSF
400-1125-062-XX 1 1-1/8 .006 0.062 .003
372
400-1250-062-XX** 1-1/8 1-1/4 .006 0.062 .003
This ALTAFLUOR® 400 PFA has been tested and
* Custom item - please consult factory for lead time and minimum order requirements.
** Available in straight lengths only.
Altaflo office for details.
High Purity PFA is available - please see ALTAFLUOR® 480 SERIES UHP PFA + ALTAFLUOR® 450 SERIES HP PFA

ALTAFLUOR® 400 PFA - BEND RADIUS AND WORKING PRESSURE CHART

400-0125-030-XX 0.125 0.030 0.062 1/2" 449
400-0156-030-XX 0.156 0.030 0.094 1/2" 360
400-0188-030-XX 0.188 0.030 0.125 3/4" 299
400-0188-062-XX 0.188 0.062 0.062 1/2" 617
400-0250-030-XX 0.250 0.030 0.188 1" 225
400-0250-040-XX 0.250 0.040 0.170 1" 300
400-0250-047-XX 0.250 0.047 0.157 3/4" 352
400-0250-062-XX 0.250 0.062 0.125 1/2" 464
400-0313-030-XX 0.313 0.030 0.250 1-3/4" 179
400-0313-062-XX 0.313 0.062 0.188 1" 371
400-0375-030-XX 0.375 0.030 0.313 2-1/2" 150
400-0375-062-XX 0.375 0.062 0.250 1" 310
400-0438-030-XX 0.438 0.030 0.375 3-1/2" 128
400-0438-062-XX 0.438 0.062 0.313 2" 265
400-0500-030-XX 0.500 0.030 0.438 4" 112
400-0500-062-XX 0.500 0.062 0.375 2" 232
400-0625-030-XX 0.625 0.030 0.562 6-1/2" 90
400-0625-062-XX 0.625 0.062 0.500 3" 186
400-0750-030-XX 0.750 0.030 0.688 8" 75
400-0750-062-XX 0.750 0.062 0.625 6" 155
400-0875-062-XX 0.875 0.062 0.750 12" 133
400-1000-062-XX 1.000 0.062 0.875 22" 116
400-1125-062-XX 1.125 0.062 1.000 N/A 105
400-1250-062-XX 1.250 0.062 1.125 N/A 84
METRIC SIZES OD WALL ID BEND RADIUS WORKING PRESSURE @ 73°F

400-0157-040-XX 0.157 0.040 0.078 1-1/2" 468
4mm 1mm 2mm
400-0236-040-XX 0.236 0.040 0.157 1-3/4" 312
6mm 1mm 4mm
400-0315-040-XX 0.315 0.040 0.236 2-1/2" 234
8mm 1mm 6mm
400-0394-040-XX 0.394 0.040 0.315 2-3/4" 187
10mm 1mm 8mm
400-0472-040-XX 0.472 0.040 0.394 4" 156
12mm 1mm 10mm
ALTAFLUOR® 400 SERIES PFA - PHYSICAL PROPERTIES

MIT Flex Life D 2176 500,000+
NOTE: The values represented above are based on the use of 100% virgin grade high performance - low melt flow PFA resin as used in the production of ALTAFLUOR® 400 Series Tubing. When comparing data it is
critical that performance values are listed for the grade of resin used.
High Purity PFA is available - please see ALTAFLUOR® 480 SERIES UHP PFA + ALTAFLUOR® 450 SERIES HP PFA

ALTAFLUOR® 400 PFA - TUBING ALTAFLUOR® 400 PFA - TUBING SCHEDULE 40 PIPE
PART NUMBER ID OD +/- WALL +/- PART NUMBER NOMINAL SIZE ACTUAL SIZE WALL STOCK LENGTH
METRIC SIZES
400-0540-088-0C* 1/4" .540" ± .010 .088"±.020,-0 5ft / 10ft
400-0157-040-XX 2mm 4mm .005 1mm .003
400-0840-109-0C* 1/2" .840" ± .010 .109"±.020,-0 5ft / 10ft
.079 .157 .005 0.040 .003
400-1050-113-0C* 3/4" 1.050" ± .010 .113"±.020,-0 5ft / 10ft
400-0197-040-XX 3mm 5mm .005 1mm .003
400-1315-133-0C* 1" 1.315" ± .010 .133"±.020,-0 5ft / 10ft
.118 .197 .005 0.040 .003
400-1660-140-OC* 1-1/4" 1.660" ± .015 .140"±.020,-0 10 FT
400-0236-040-XX 4mm 6mm .005 1mm .003
400-1900-145-OC* 1-1/2" 1.900" ± .015 .145"±.020,-0 10 FT
.157 .236 .005 0.040 .003
400-2375-154-OC* 2" 2.374" ± .015 .154"±.020,-0 10 FT
400-0276-040-XX 5mm 7mm .005 1mm .003
.197 .276 .005 0.040 .003 *Custom item - please consult factory for lead time and minimum order requirements. Please see
400-0315-040-XX 6mm 8mm .005 1mm .003 ALTAFLUOR® 480 Pipe for stock items. Additional sizes and Schedule 80 Pipe available upon request.
.236 .315 .005 0.040 .003 Custom item - see Coiled Hose Order Form for ordering information. Please consult factory for additional
400-0354-040-XX 7mm 9mm .005 1mm .003 details. 480 SERIES UHP PFA schedule 40 pipe is a stock item and available for immediate shipment.
.276 .354 .005 0.040 .003
400-0394-040-XX 8mm 10mm .005 1mm .003 ALTAFLUOR® 400 PFA - COILED HOSE
.315 .394 .005 0.040 .003
400-0433-040-XX 9mm 11mm .005 1mm .003
.354 .433 .005 0.040 .003
400-0472-040-XX 10mm 12mm .005 1mm .003
.394 .472 .005 0.040 .003
400-0551-040-XX 12mm 14mm .005 1mm .003
.472 .551 .005 0.040 .003
400-0630-040-XX 14mm 16mm .005 1mm .003
.551 .630 .005 0.040 .003
Custom item - see Coiled Hose Order Form for ordering information. Please consult factory for
400-0354-059-XX 6mm 9mm .005 1.5mm .003 additional details.
.236 .354 .005 0.059 .003
400-0472-059-XX 9mm 12mm .005 1.5mm .003
.354 .472 .005 0.059 .003
Additional sizes up to 4” OD are available as custom extrusions - minimum order requirements may
apply. Please contact Altaflo office for details.
NEW: High Purity PFA is available - please see ALTAFLUOR® 480 SERIES UHP PFA
ALTAFLUOR® 400 PFA - STANDARD CONVOLUTED CONSTRUCTION
40C-0375-020-XX* 3/8 0.251 0.275 0.375 0.020 6
40C-0500-023-XX* 1/2 0.364 0.375 0.500 0.023 6
40C-0625-025-XX* 5/8 0.485 0.500 0.625 0.025 5.5
40C-0750-025-XX* 3/4 0.608 0.625 0.750 0.025 5
40C-0875-025-XX* 7/8 0.730 0.750 0.875 0.025 4
40C-1000-025-XX* 1 0.860 0.875 1.000 0.025 3.5
*Custom item - please consult factory for lead time and minimum order requirements.
ALTAFLUOR® 400 PFA - ULTRA FLEX CONVOLUTED CONSTRUCTION
40U-0375-020-XX* 3/8 0.251 0.275 0.375 0.020 9
40U-0500-023-XX* 1/2 0.364 0.375 0.500 0.023 9
40U-0625-025XX* 5/8 0.485 0.500 0.625 0.025 9
40U-0750-025-XX* 3/4 0.608 0.625 0.750 0.025 8
40U-0875-025-XX* 7/8 0.730 0.750 0.875 0.025 8
40U-1000-025-XX* 1 0.860 0.875 1.000 0.025 8

ALTAFLUOR® 450 HP PFA (high purity perfluoroalkoxy) is commonly chosen for applications involving extreme chemical resistance combined with high purity requirements. Although HP PFA is
available in a variety of resin grades, ALTAFLUOR® 450 HP PFA tubing is made from a high molecular weight, high purity resin that provides excellent chemical resistance, highest purity levels
(extractable data available upon request) and smooth surface finish. ALTAFLUOR® 450 HP PFA tubing is ideal for use with flare or conventional fittings.
ALTAFLUOR® 450 FEATURES ALTAFLUOR® 450 HP PFA - TUBING
• Exclusive use of Dyneon • Smooth surface finish resulting

6502UHP PFA – a Semi-57 & in less area of particle PART NUMBER ID OD +/- WALL +/-
C-90 approved resin entrapment 450-0125-030-OC 1/16 1/8 .004 0.030 .003
• 100% Virgin High Performance • Moisture absorption nearly zero 450-0250-030-OC 3/16 1/4 .004 0.030 .003
Grade resin used to resist stress • FDA compliant for food contact
cracking 450-0250-040-OC .170 1/4 .004 0.040 .003
• Non-Flammable
• Chemically inert to nearly all
• Suitable for use with flare or 450-0250-047-OC .156 1/4 .004 0.047 .003
industrial chemicals & solvents
conventional fittings
• High thermal stability 450-0250-062-OC 1/8 1/4 .005 0.062 .003
• Also available in pipe,
• Low permeation 450-0375-062-OC 1/4 3/8 .005 0.062 .003
coiled hose and convoluted
450-0500-062-OC 3/8 1/2 .005 0.062 .003
• Translucent constructions
450-0750-062-OC 5/8 3/4 .005 0.062 .003
APPLICATIONS 450-1000-062-OC 7/8 1 .005 0.062 .003
• Semiconductor • Laboratory applications 450-1250-075-OC 1.100 1.250 .008 0.075 .003

• Chemical process • Flow Monitoring METRIC SIZES ID OD +/- WALL +/-
• Heat Exchangers • Pharmaceutical 450-0157-040-OC 2mm 4mm .005 1mm .003
.078 .157 .005 0.040 .003
SPECIFICATIONS 450-0236-040-OC 4mm 6mm .005 1mm .003
.157 .236 .005 0.040 .003
General: Meets or exceeds the requirements listed in ASTM D 6867-03
450-0315-040-OC 6mm 8mm .005 1mm .003
Temperature: -320 °F to 500 °F
.236 .315 .005 0.040 .003
Flammability: Resin is UL 94 V0 rated. HP PFA resists combustion and does 450-0394-040-OC 8mm 10mm .005 1mm .003
not promote flame spread. .315 .394 .005 0.040 .003
FDA: HP PFA is approved for use in food contact applications in compliance 450-0472-040-OC 10mm 12mm .005 1mm .003
with FDA regulation: 21 CFR 177.1550 .394 .472 .005 0.040 .003
Additional sizes up to 4” OD available upon request. Please contact Altaflo office for details.
Available in natural color only. For pigmented items, see ALTAFLUOR® 400 series.
Tested and meets requirements of Semi F-57 and Semi F-90. Test results available upon request.
PART NUMBER NOMINAL SIZE ACTUAL SIZE WALL STOCK LENGTH

450-0540-088-0C 1/4" .540" ± .010 .088"±.020,-0 10ft
450-0840-109-0C 1/2" .840" ± .010 .109"±.020,-0 10ft
450-1050-113-0C 3/4" 1.050" ± .015 .113"±.020,-0 10ft
450-1315-133-0C 1" 1.315" ± .015 .133"±.020,-0 10ft
450-1660-140-OC 1-1/4" 1.660" ± .015 .140"±.020,-0 10ft
450-1900-145-OC 1-1/2" 1.900" ± .015 .145"±.020,-0 10ft
450-2375-154-OC 2" 2.375" ± .020 .154"±.020,-0 10ft

ALTAFLUOR® 450 HP PFA - BEND RADIUS AND WORKING PRESSURE CHART
PART NUMBER 0D WALL ID BEND RADIUS WORKING PRESSURE @ 73°F

450-0125-030-OC 0.125 0.030 0.062 1/2" 451
450-0250-030-OC 0.250 0.030 0.188 1" 226
450-0250-040-OC 0.250 0.040 0.170 1" 301
450-0250-047-OC 0.250 0.047 0.157 3/4" 353
450-0250-062-OC 0.250 0.062 0.125 1/2" 466
450-0375-062-OC 0.375 0.062 0.250 1" 311
450-0500-062-OC 0.500 0.062 0.375 2" 233
450-0750-062-OC 0.750 0.062 0.625 6" 155
450-1000-062-OC 1.000 0.062 0.875 22" 117
450-1250-075-OC 1.250 0.075 1.100 25” 75
450-0236-040-OC 0.236 0.040 0.157 1-3/4" 313
6mm 1mm 4mm
450-0315-040-OC 0.315 0.040 0.236 2-1/2" 235
8mm 1mm 6mm
450-0394-040-OC 0.394 0.040 0.315 2-3/4" 188
10mm 1mm 8mm
Additional sizes up to 2” are available.
ALTAFLUOR® 450 SERIES HP PFA - PHYSICAL PROPERTIES

MIT Flex Life D 2176 500,000

ALTAFLUOR® 450 HP PFA - SCHEDULE 40 PIPE ALTAFLUOR® 450 HP PFA - COILED HOSE
PART NUMBER NOMINAL SIZE ACTUAL SIZE WALL STOCK LENGTH

450-0540-088-0C 1/4" .540" ± .010 .088"±.020,-0 10ft
450-0840-109-0C 1/2" .840" ± .010 .109"±.020,-0 10ft
450-1050-113-0C 3/4" 1.050" ± .010 .113"±.020,-0 10ft
450-1315-133-0C 1" 1.315" ± .010 .133"±.020,-0 10ft
450-1660-140-OC 1-1/4" 1.660" ± .015 .140"±.020,-0 10ft
450-1900-145-OC 1-1/2" 1.900" ± .015 .145"±.020,-0 10ft
450-2375-154-OC 2" 2.374" ± .015 .154"±.020,-0 10ft
Additional sizes and Schedule 80 Pipe available upon request. Minimum order requirements for non-catalog additional details.
items will apply. 10 ft minimum order requirement - can be cut into shorter lengths for shipment. All 450 HP
PFA in stock.
ALTAFLUOR® 450 HP PFA - STANDARD CONVOLUTED CONSTRUCTION
45C-0375-020-0C* 3/8 0.251 0.275 0.375 0.020 6
45C-0500-023-0C* 1/2 0.364 0.375 0.500 0.023 6
45C-0625-025-0C* 5/8 0.485 0.500 0.625 0.025 5.5
45C-0750-025-0C* 3/4 0.608 0.625 0.750 0.025 5
45C-0875-025-0C* 7/8 0.730 0.750 0.875 0.025 4
45C-1000-025-0C* 1 0.860 0.875 1.000 0.025 3.5
ALTAFLUOR® 450 HP PFA - ULTRA FLEX CONVOLUTED CONSTRUCTION
45U-0375-020-0C* 3/8 0.251 0.275 0.375 0.020 9
45U-0500-023-0C* 1/2 0.364 0.375 0.500 0.023 9
45U-0625-025-0C* 5/8 0.485 0.500 0.625 0.025 9
45U-0750-025-0C* 3/4 0.608 0.625 0.750 0.025 8
45U-0875-025-0C* 7/8 0.730 0.750 0.875 0.025 8
45U-1000-025-0C* 1 0.860 0.875 1.000 0.025 8

ALTAFLUOR 450 SERIES DCHP DUAL CONTAINMENT HP PFA TUBING 16
The CLEAR CHOICE for semiconductor, pharmaceutical, and other critical chemical systems
ALTAFLUOR® DCHP SERIES DUAL CONTAINMENT TUBING provides end users with an integrated fluid flow solution for critical processes where high purity and safety are primary concerns.
The inner tube, produced exclusively from 100% Virgin Dyneon 6502UHPZ HP PFA resin, ensures highest purity levels in critical applications. The outer tube, constructed of 100% Virgin grade FEP
not only provides excellent clarity for visual inspection, but offers enhanced protection against product damage or personal injury from possible leaks that may occur during the chemical delivery
process. The Tube-in-Tube design does not introduce contaminants during the installation process and the ability to provide ALTAFLUOR® DCHP Dual Containment Tubing in long continuous lengths
reduces the need for excess connections thereby reducing the overall system cost.
KEY PROPERTIES ALTAFLUOR® DCHP SERIES DUAL CONTAINMENT
• Exclusive use of Dyneon • Extremely low extractable levels:

PART NUMBER PRIMARY TUBING OUTER TUBING (FEP) PSI@72F WT/FT
6502UHPZ HP PFA SEMI F-57 metallic and organic (DYNEON 6502UHPZ HP PFA) (PRIMARY) (LBS)
DCHP-0250-0500 5/32 ID x 1/4 OD x .047 W 3/8 ID x 1/2 OD x .062 W 355 .11
& C-90 approved resin • Smooth surface finish DCHP-0375-0750 1/4 ID x 3/8 OD x .062 W 5/8 ID x 3/4 OD x .062 W 315 .18
• Produced and packaged in a • Excellemt mechanical DCHP-0500-0750 3/8 ID x 1/2 OD x .062 W 5/8 ID x 3/4 OD x .062 W 235 .21
clean room environment performance DCHP-0750-1000 5/8 ID x 3/4 OD x .062 W 7/8 ID x 1 OD x .062 W 155 .30
• Ends capped - custom dual • Laser marked for complete DCHP-1000-1250 7/8 ID x 1 OD x .062 W 1.10 ID x 1.250 OD x .062 W 120 .44
containment end caps traceability PACKAGING: Coils of 100 FT or less are packaged in heavy gauge anti-static bag heat-sealed inside heat-sealed heavy
• Excellent chemical clear polybag.
• Flame resistant - fluoropolymers
resistance All ends capped. Longer lengths are provided on cleanroom compatible plastic reelswrapped in stretchwrap. For lengths less
meet UL 94 VO
than 500 FT a partial reel charge may apply. See sales for details.
• Low permeability
CUSTOM APPLICATIONS
• Custom laser marking • Additional sizes and material

• Custom packaging: straight selections available upon request
lengths, short cut-to-length
pieces; long continuous lengths
• Private Labeling

ALTAFLUOR® 480 UHP PFA - BEND RADIUS AND WORKING PRESSURE CHART
PART NUMBER 0D WALL ID BEND RADIUS WORKING PRESSURE @ 73°F

480-0125-030-OC 0.125 0.030 0.062 1/2" 451
480-0250-030-OC 0.250 0.030 0.188 1" 226
480-0250-040-OC 0.250 0.040 0.170 1" 301
480-0250-047-OC 0.250 0.047 0.157 3/4" 353
480-0250-062-OC 0.250 0.062 0.125 1/2" 466
480-0375-062-OC 0.375 0.062 0.250 1" 311
480-0500-062-OC 0.500 0.062 0.375 2" 233
480-0750-062-OC 0.750 0.062 0.625 6" 155
480-1000-062-OC 1.000 0.062 0.875 22" 117
480-1250-075-OC 1.250 0.075 1.100 25” 75
480-0236-040-OC 0.236 0.040 0.157 1-3/4" 313
6mm 1mm 4mm
480-0315-040-OC 0.315 0.040 0.236 2-1/2" 235
8mm 1mm 6mm
480-0394-040-OC 0.394 0.040 0.315 2-3/4" 188
10mm 1mm 8mm
Additional sizes up to 2” are available.
ALTAFLUOR® 480 SERIES UHP PFA - PHYSICAL PROPERTIES

MIT Flex Life D 2176 1,750,000

ALTAFLUOR® 480 UHP PFA (ultra high purity perfluoroalkoxy) is the product of choice for applications involving extreme chemical resistance combined with high purity requirements.
Although HP PFA is available in a variety of resin grades, ALTAFLUOR® 480 UHP PFA tubing is made exclusively from a high molecular weight, high purity resin that provides excellent chemical
resistance, (even to common fluorosurfactants), highest purity levels, low permeation levels and smoothest surface finish. Unlike standard HP PFA tubing products, ALTAFLUOR® 480 Series UHP PFA
has superior flex life values comparable to those of PTFE. ALTAFLUOR® 480 UHP PFA tubing is ideal for use with flare or conventional fittings.
ALTAFLUOR® 480 FEATURES ALTAFLUOR® 480 UHP PFA - TUBING
• Exclusive use of Daikin AP- entrapment PART NUMBER ID OD +/- WALL +/-
231SH UHP PFA Semi -F57 • Moisture absorption nearly zero 480-0125-030-OC 1/16 1/8 .004 0.030 .003
approved resin 480-0250-030-OC 3/16 1/4 .004 0.030 .003
• FDA compliant for food contact
• 100% virgin grade high
• Non-flammable 480-0250-040-OC .170 1/4 .004 0.040 .003
performance resins used to
resist stress cracking • Suitable for use with flare or
conventional fittings 480-0250-047-OC .156 1/4 .004 0.047 .003
• Chemically inert to nearly all
industrial chemicals and solvents • Available in coiled hose and
480-0250-062-OC 1/8 1/4 .005 0.062 .003
convoluted constructions
• Highest thermal stability 480-0375-062-OC 1/4 3/8 .005 0.062 .003
• Superior resistance to common 480-0500-062-OC 3/8 1/2 .005 0.062 .003
• Lowest permeation (even with
fluorosurfactants vs. other PFA 480-0750-062-OC 5/8 3/4 .005 0.062 .003
aggressive chemicals such
and HP PFA 480-1000-062-OC 7/8 1 .005 0.062 .003
as HCL)
• Greatest flex life values
• Translucent 480-1250-075-OC 1.100 1.250 .008 0.075 .003
compared with other PFA and
• Smoothest surface finish HP PFA materials METRIC SIZES ID OD +/- WALL +/-
resulting in less area of particle 480-0157-040-OC 2mm 4mm .005 1mm .003
.078 .157 .005 0.040 .003
APPLICATIONS
480-0236-040-OC 4mm 6mm .005 1mm .003
• Semiconductor • Laboratory applications .157 .236 .005 0.040 .003
480-0315-040-OC 6mm 8mm .005 1mm .003
• Chemical process • Flow monitoring
.236 .315 .005 0.040 .003
• Heat exchangers • Pharmaceutical 480-0394-040-OC 8mm 10mm .005 1mm .003
.315 .394 .005 0.040 .003
SPECIFICATIONS
480-0472-040-OC 10mm 12mm .005 1mm .003
General: Meets or exceeds the requirements listed in ASTM D 6867-03 .394 .472 .005 0.040 .003
Temperature: -320 °F to 500 °F Additional sizes up to 4” OD available upon request. Please contact Altaflo office for details.
Flammability: UL 94 VO rated. UHP PFA resists combustion and does not Available in natural color only. For pigmented items, see ALTAFLUOR® 400 series.
promote flame spread
Tested and meets requirements of Semi F-57 and Semi F-90. Test results available upon request.
FDA: UHP PFA is approved for use in food contact applications in
compliance with FDA regulation: 21 CFR 177.1550
USP CLASS VI: ALTAFLUOR® meets the requirements of USP Class VI
NSF: ALTAFLUOR® 480 UHP PFA tubing is certified to NSF 51, NSF 61 and
NSF 372
This ALTAFLUOR® 480 UHP PFA has been tested and


ALTAFLUOR® 480 UHP PFA - SCHEDULE 40 PIPE ALTAFLUOR® 480 UHP PFA - COILED HOSE
PART NUMBER NOMINAL SIZE ACTUAL SIZE WALL

480-0540-088-0C 1/4" .540" ± .010 .088"±.020,-0
480-0840-109-0C 1/2" .840" ± .010 .109"±.020,-0
480-1050-113-0C 3/4" 1.050" ± .015 .113"±.020,-0
480-1315-133-0C 1" 1.315" ± .015 .133"±.020,-0
480-1660-140-OC 1-1/4" 1.660" ± .015 .140"±.020,-0
480-1900-145-OC 1-1/2" 1.900" ± .015 .145"±.020,-0
480-2375-154-OC 2" 2.375" ± .020 .154"±.020,-0
ALTAFLUOR® 480 series UHP PFA schedule 40 pipe is considered custom. Minimum order requirements may additional details.
apply. Standard length is 10ft but may be cut into shorter lengths for shipment if needed. For stock HP PFA
schedule 40 pipe please see our ALTAFLUOR® 450 series HP PFA pipe.
ALTAFLUOR® 480 UHP PFA - STANDARD CONVOLUTED CONSTRUCTION
48C-0375-020-0C* 3/8 0.251 0.275 0.375 0.020 6
48C-0500-023-0C* 1/2 0.364 0.375 0.500 0.023 6
48C-0625-025-0C* 5/8 0.485 0.500 0.625 0.025 5.5
48C-0750-025-0C* 3/4 0.608 0.625 0.750 0.025 5
48C-0875-025-0C* 7/8 0.730 0.750 0.875 0.025 4
48C-1000-025-0C* 1 0.860 0.875 1.000 0.025 3.5
ALTAFLUOR® 480 UHP PFA - ULTRA FLEX CONVOLUTED CONSTRUCTION
48U-0375-020-0C* 3/8 0.251 0.275 0.375 0.020 9
48U-0500-023-0C* 1/2 0.364 0.375 0.500 0.023 9
48U-0625-025-0C* 5/8 0.485 0.500 0.625 0.025 9
48U-0750-025-0C* 3/4 0.608 0.625 0.750 0.025 8
48U-0875-025-0C* 7/8 0.730 0.750 0.875 0.025 8
48U-1000-025-0C* 1 0.860 0.875 1.000 0.025 8

ALTAFLUOR® DUAL CONTAINMENT TUBING UHP PFA 20
The CLEAR CHOICE for semiconductor, pharmaceutical, and other critical chemical systems
ALTAFLUOR® DC SERIES DUAL CONTAINMENT TUBING provides end users with an integrated fluid flow solution for critical processes where high purity and safety are primary concerns.
The inner tube, produced exclusively from 100% Virgin Daikin AP231SH UHP PFA resin, ensures the greatest overall performance in critical and aggressive applications. The outer tube, constructed
of 100% Virgin grade FEP not only provides excellent clarity for visual inspection, but offers enhanced protection against product damage or personal injury from possible leaks that may occur
during the chemical delivery process. The Tube-in-Tube design does not introduce contaminants during the installation process and the ability to provide ALTAFLUOR® Dual Containment Tubing in
long continuous lengths reduces the need for excess connections thereby reducing the overall system cost.
KEY PROPERTIES ALTAFLUOR® DUAL CONTAINMENT TUBING
• Exclusive use of Daikin AP- • Extremely low extractable levels:

PART NUMBER PRIMARY TUBING OUTER TUBING PSI@72F WT/FT
231SH UHP PFA Semi -F57 metallic and organic (PRIMARY) (LBS)
DC-0250-0500-0C 5/32 ID x 1/4 OD x .047 3/8 ID x 1/2 OD x .062 355 .11
approved resin • Extremely smooth surface finish DC-0375-0750-0C 1/4 ID x 3/8 OD x .062 5/8 ID x 3/4 OD x .062 315 .18
• Produced and packaged in a • Highest mechanical DC-0500-0750-0C 3/8 ID x 1/2 OD x .062 5/8 ID x 3/4 OD x .062 235 .21
clean room environment performance vs other PFA and DC-0750-1000-0C 5/8 ID x 3/4 OD x .062 7/8 ID x 1 OD x .062 155 .30
• Ends capped - custom dual HP PFA tubing products DC-1000-1250-0C 7/8 ID x 1 OD x .062 1.10 ID x 1.250 OD x .075 120 .44
containment end caps • Flex life comparable with PTFE PACKAGING: Coils of 100 FT or less are packaged in heavy gauge anti-static bag heat-sealed inside heat-sealed heavy
• Excellent chemical resistance clear polybag.
• Laser marked for complete
- (even with common All ends capped. Longer lengths are provided on clean room compatible plastic reels wrapped in anti-static stretch-wrap.
traceability
Fluorosurfactants known to Note: For certifications see 480 Series UHP PFA section
• Flame resistant - fluoropolymers
attack lower PFA grades)
meet UL 94 VO
• Low permeability
CUSTOM APPLICATIONS
• Custom laser marking • Private Labeling

• Custom packaging: straight • Additional sizes and material
lengths, short cut-to-length parts selections available upon request

ALTAFLUOR® 500 PVDF 21
PVDF (Polyvinylidene Fluoride) is an abrasion resistant fluoropolymer suitable for use in applications requiring chemical resistance with low permeability. ALTAFLUOR® 500 PVDF is the most abrasion
and temperature resistant of the PVDF products offered. ALTAFLUOR® 500 provides excellent abrasion resistance and mechanical strength in use with many chemicals and solvents. With its
extremely low extractable levels, ALTAFLUOR® 500 is excellent for use in ultra pure water systems. ALTAFLUOR® 500 is suitable for use with conventional fittings but is not recommended for use with
flare fittings.
ALTAFLUOR® 500 FEATURES ALTAFLUOR® 500 PVDF - TUBING
• 100% virgin grade KYNAR® PVDF • Good chemical resistance PART NUMBER ID OD +/- WALL +/-
• Excellent abrasion resistance • UV resistant
ALTAFLUOR® 500 is produced from a KYNAR® homopolymer PVDF resin and is available as a custom order. Minimum order
• Low permeability • FDA Compliant requirements apply. Please consult factory for sizes and availability. For Flexible PVDF, please see ALTAFLUOR® 550 series.
APPLICATIONS ALTAFLUOR® 500 SERIES PVDF - PHYSICAL PROPERTIES
• Chemical process • Water process systems PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES
• Semiconductor • Aquarium Upper Service Temp 250° F
Specific Gravity D 792 1.77-1.79
SPECIFICATIONS Tensile Strength D 1708 PSI 5000-7000
General: Resins meet or exceed requirements listed in ASTM D 3222
Flex Modulus D 790 PSI 240,000-300,000
Temperature: -20° F to 250° F
Flammability: UL 94-VO rated KYNAR® PVDF resists combustion and does
not promote flame spread The above information is based on tests performed at 73° F and can vary in individual applications based on parameters such
FDA: KYNAR® PVDF is approved for use in food contact applications in as temperature, chemical concentration, pressure, etc. Please consult factory for details. For an estimate on burst pressure
compliance with FDA regulation 21 CFR 177.1500
NSF: ALTAFLUOR® 500 PVDF tubing is certified to NSF 51, NSF 61 and NSF
372

PVDF FLEX (polyvinylidene fluoride - commonly known by the trade name KYNAR FLEX®) is a more flexible version of PVDF. ALTAFLUOR® 550 Tubing is resistant to many commonly used industrial
fluids and gases, including ozone, and does not support the growth of fungi. For this reason ALTAFLUOR® 550 tubing is preferred for water disinfecting processes involving ozone such as aquarium,
spa, pool and agriculture. Additionally, it is ideal for applications with exposure to less aggressive chemicals and lower temperature exposure (over FEP or PFA) or those requiring low extractable
levels. ALTAFLUOR® 550 is available in many standard sizes available to ship from stock. Custom sizes are available upon request.* ALTAFLUOR® 550 tubing is compatible with most standard fittings
(not suitable for use with flare fittings).
ALTAFLUOR® 550 FEATURES ALTAFLUOR® 550 PVDF FLEX - TUBING
• 100% virgin grade KYNAR • Good abrasion resistance PART NUMBER ID OD +/- WALL +/-
FLEX® PVDF • Low permeability 550-0125-030-XX 1/16 1/8 .004 0.030 .003
• Chemically resistant to many 550-0188-030-XX 1/8 3/16 .004 0.030 .003
• Excellent creep resistance
industrial chemicals and 550-0250-030-XX 3/16 1/4 .004 0.030 .003
• Excellent thermal stability 550-0313-030-XX 1/4 5/16 .005 0.030 .003
solvents including acids,
chlorinated chemicals, • Better flexibility (over 550-0375-030-XX 5/16 3/8 .005 0.030 .003
brominated chemicals,alcohols, ALTAFLUOR® 500)
550-0250-040-XX 0.170 1/4 .005 0.040 .003
and hydrocarbons. • UV resistant
550-0250-047-XX 5/32 1/4 .005 0.047 .003
• Low smoke and flame properties • Nuclear radiation resistant
• Resistant to bacteria and fungal • FDA compliant 550-0250-062-XX 1/8 1/4 .005 0.062 .003
growth 550-0375-062-XX 1/4 3/8 .005 0.062 .003
550-0500-062-XX 3/8 1/2 .005 0.062 .003
APPLICATIONS 550-0625-062-XX 1/2 5/8 .006 0.062 .003
550-0750-062-XX 5/8 3/4 .006 0.062 .003
• Metal preparation • Chemical process
550-1000-062-XX 7/8 1 .006 0.062 .003
• Food and beverage • Ultra-pure water process
METRIC SIZES ID OD +/- WALL +/-
• Petrochemical processing systems
550-0157-040-XX 2mm 4mm .005 1mm .003
• High purity semiconductor • Pulp and paper 0.079 0.157 .005 0.040 .003
• Aquarium 550-0236-040-XX 4mm 6mm .005 1mm .003
• Water purification
0.157 0.236 .005 0.040 .003
• Pool and spa
550-0315-040-XX 6mm 8mm .005 1mm .003
SPECIFICATIONS 0.236 .315 .005 0.040 .003
550-0394-040-XX 8mm 10mm .005 1mm .003
General: Resin meets or exceeds requirements listed in ASTM D 3222 0.315 0.394 .005 0.040 .003
Temperature: -20° F to 212° F 550-0472-040-XX 10mm 12mm .005 1mm .003
Flammability: UL 94-VO rated KYNAR FLEX® PVDF resists combustion and 0.394 0.472 .005 0.040 .003
does not promote flame spread
Additional sizes available - please consult factory for details.
FDA: KYNAR FLEX® PVDF is approved for use in food contact applications in
compliance with FDA regulation 21 CFR 177.2600
NSF: ALTAFLUOR® 550 PVDF FLEX tubing is certified to NSF 51, NSF 61
and NSF 372
This ALTAFLUOR® 550 PVDF FLEX has been tested and

ALTAFLUOR® 550 PVDF FLEX - TUBING

550-0125-030-OC 0.125 0.030 0.062 1/2" 451
550-0188-030-0C 0.188 0.030 0.125 3/4" 168
550-0250-030-OC 0.250 0.030 0.188 1" 126
550-0313-030-OC 0.313 0.030 0.250 1-3/4" 101
550-0375-030-OC 0.375 0.030 0.313 2-1/2" 84
550-0250-040-OC 0.250 0.040 0.170 1" 155

550-0250-047-OC 0.250 0.047 0.156 3/4" 177
550-0250-062-OC 0.250 0.062 0.125 1/2" 260

550-0375-062-OC 0.375 0.062 0.250 1" 174
550-0500-062-OC 0.500 0.062 0.375 2" 130
550-0625-062-OC 0.625 0.062 0.500 3" 104
550-0750-062-OC 0.750 0.062 0.625 5" 87
550-1000-062-OC 1.000 0.062 0.875 22" 65
Additional sizes available - please consult factory for details.
ALTAFLUOR® 550 SERIES PVDF - PHYSICAL PROPERTIES

Upper Service Temp 212° F
Flex Modulus D 790 PSI 40,000-60,000

COILED HOSE ORDER FORM 24
All ALTAFLO products are available in coiled configurations. We will manufacture to your specifications. Please use this worksheet for ordering. You can also contact our sales department to discuss
specific details of your application.
COIL TUBING COIL DIMENSIONS INNER TUBING COIL CONFIGURATION

OD A Complete this section only if an inner tube is If the coil configuration shown above is not
1/4” 3/8” LEFT TAIL required. suitable for your purposes, please submit a
1/2” OD custom design.
USE SHOWN CONFIGURATION
(specify) B
(specify) CUSTOM DESIGN SUBMITTED
WALL RETRACTED LENGTH
.030” .062” WALL
DRAWING NUMBER:
(specify) C
(specify)
MATERIAL RIGHT TAIL
PTFE FEP MATERIAL
REVISION:
PFA HP-PFA PTFE FLEX
SPECIFY ONE DIMENSION
UHP-PFA MFA (specify)
D - COIL ID =
PVDF COLOR
COLOR NATURAL
RIGHT TAIL
NATURAL (specify)
E - COIL OD =
(specify) TOTAL LENGTH OF TUBE USED
TOTAL LENGTH As required
AS REQUIRED (specify)
(specify) X
EXTENSION OUT OF LEFT TAIL
Y
EXTENSION OUT OF RIGHT TAIL
QUANTITY:
Company: Notes:
Name:
Email:
Phone:
Cell:
Fax:

ALTAFLO MATERIAL SELECTION CHART
ASTM TEST 100 (PTFE) 200 (FEP) 2E0 (FEP) 350 (THV) 400 (PFA) 480 (UHP PFA) 500 (PVDF) 550 (PVDF FLEX) 700 (ETFE)
UPPER SERVICE TEMP. °F 500° F* 400° F 400° F 180° F 500° F 500° F 250° F 212° F 300° F
SPECIFIC GRAVITY D 792 2.15 2.15 2.12-2.17 1.95 2.15 2.15 1.77-1.79 1.78 1.74
TENSILE STRENGTH PSI D 1708 2500-3000 4000 3500 2900 4200 4500 5000-7000 3500 3100-6800
ELONGATION % D 638 200-400 400 300-400 600 400 400 50-200 200-500 420-450
FLEX MODULUS PSI D 790 27,000 90,000 90,000 12,000 90,000 90,000 240,000-300,00 40,000-60,000 128,000-171,000
MIT FLEX LIFE D 2176 1,000,000+ 200,000 5000 N/A 500,000+ 1,750,000 N/A N/A N/A
HARDNESS - SHORE D D 2240 60 57-60 57-60 44 60 60 76-80 57-62 75
*ALTAFLUOR 100 ® SERIES PTFE Short Term Upper Service Temp: 550° F.


Altaflo Maincatalog v20

Uploaded by

Copyright:

Available Formats

Altaflo Maincatalog v20

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Altaflo Maincatalog v20

Uploaded by

Copyright:

Available Formats

HIGH PERFORMANCE FLUOROPOLYMER AND

FLUOROPLASTIC TUBING AND PIPE

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 100 PTFE 4

ALTAFLUOR® 200 FEP 5

ALTAFLUOR® 200 FEP 6

ALTAFLUOR® 200 FEP 7

ALTAFLUOR® 2E0 FEP ENVIRO 8

ALTAFLUOR® 350 THV FLEX 9

ALTAFLUOR® 400 PFA 10

ALTAFLUOR® 400 PFA 11

ALTAFLUOR® 400 PFA 12

ALTAFLUOR® 450 HP PFA 13

ALTAFLUOR® 450 HP PFA 14

ALTAFLUOR® 450 HP PFA 15

ALTAFLUOR 450 SERIES DCHP DUAL CONTAINMENT HP PFA

ALTAFLUOR® 480 UHP PFA 17

ALTAFLUOR® 480 UHP PFA 18

ALTAFLUOR® 480 UHP PFA 19

ALTAFLUOR® DUAL CONTAINMENT TUBING UHP PFA 20

ALTAFLUOR® 500 PVDF 21

ALTAFLUOR® 550 PVDF FLEX 22

ALTAFLUOR® 550 PVDF FLEX 23

COILED HOSE ORDER FORM 24

ALTAFLO MATERIAL SELECTION CHART 25

ALTAFLUOR® 100 FEATURES ALTAFLUOR® 100 PTFE - TUBING

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 100 PTFE - BEND RADIUS AND WORKING PRESSURE CHART

PART NUMBER ID OD WALL BEND RADIUS WORKING PRESSURE @ 73°F

ALTAFLUOR® 100 PTFE - PHYSICAL PROPERTIES

PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 200 FEATURES ALTAFLUOR® 200 - FEP TUBING

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 200 SERIES FEP - PHYSICAL PROPERTIES

ALTAFLUOR® 200 FEP - TUBING ALTAFLUOR® 200 FEP - SCHEDULE 40 PIPE

ALTAFLUOR® 200 FEP - STANDARD CONVOLUTED CONSTRUCTION

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 2E0 FEATURES ALTAFLUOR® 2E0 FEP ENVIRO - ENVIRO TUBING

ALTAFLUOR® 2E0 FEP ENVIRO - PHYSICAL PROPERTIES

PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 350 FEATURES ALTAFLUOR® 350 THV FLEX - TUBING

ALTAFLUOR® 350 SERIES THV FLEX - PHYSICAL PROPERTIES

PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 400 FEATURES ALTAFLUOR® 400 PFA - TUBING

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 400 PFA - BEND RADIUS AND WORKING PRESSURE CHART

PART NUMBER OD WALL ID BEND RADIUS WORKING PRESSURE @ 73°F

METRIC SIZES OD WALL ID BEND RADIUS WORKING PRESSURE @ 73°F

ALTAFLUOR® 400 SERIES PFA - PHYSICAL PROPERTIES

PHYSICAL PROPERTY ASTM TEST METHOD UNITS VALUES

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 400 PFA - STANDARD CONVOLUTED CONSTRUCTION

ALTAFLUOR® 400 PFA - ULTRA FLEX CONVOLUTED CONSTRUCTION

P: 973-300-3344 ALTAFLUOR® is a registered trademark of Altaflo LLC

ALTAFLUOR® 450 FEATURES ALTAFLUOR® 450 HP PFA - TUBING