EX42000 Series

5-port 10/100Base Fast Ethernet Industrial Unmanaged Ethernet Switches

Overview
Hardened Unmanaged Ethernet Switches

The EX42000 series compact Fast Ethernet Switches are equipped with 5-port
10/100Base-TX or 4-port 10/100Base-TX plus 1-port 100Base-FX. By using standard
auto-negotiation and the inclusion of auto-MDIX, EtherWAN provides a cost-
effective way of integrating legacy 10Mbps networks with 100Mbps Fast Ethernet
networks. The TX ports auto-negotiate for 10/100Mbps speed and auto-detect
Full or Half-duplex mode. The fiber port on EX42014 is available with SC or ST with
a fiber connection between two nodes that can reach up to 120Km (74.4miles).
EX42000 series can be DIN-Rail mounted and is equipped with Terminal Block
power input to match the industrial applications that require an Ethernet Switch.

Features
Complies with IEC61000-6-2 EMC Generic standard immunity 12 to 48VDC Power inputs
for Industrial environment -10°C to 60°C (14°F to 140°F) operating temperature range
2048 MAC addresses Industrial plastic case
384K bits buffer memory Supports DIN-Rail Mounting installation
10/100Mbps-Full/Half-duplex, Auto-Negotiation, Full wire-speed forwarding rate
Auto-MDI/MDIX

Ordering Information
EX42005-00-I-P 5-port 10/100Base-TX Industrial Unmanaged Ethernet Switch
EX42014-XY-I-P 4-port 10/100Base-TX + 1-port 100Base-FX Industrial Unmanaged Ethernet Switch
EX42011-XY-I-P 1-port 10/100Base-TX + 1-port 100Base-FX Industrial Unmanaged Ethernet Switch

100FX Fiber Options:

(XY) =1A : Multi Mode (SC)
1B : Multi Mode (ST)
2A : Single Mode (SC) -20Km
2B : Single Mode (SC) -40Km
2D : Single Mode (ST) -20Km
1H : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm -2Km
1J : Multi Mode (SC) WDM -TX: 1310nm/RX:1550nm -5Km
2E : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
2F : Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
1I : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm -2Km
1K : Multi Mode (SC) WDM -TX: 1550nm/RX:1310nm 5Km
2G : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -5Km
2H : Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km
*More 100FX Fiber options also available upon request.

Installation Type:
(I) = 1 : DIN Rail (mounting kit is included)

Power Connector Options :

(P) = A : Terminal Block*
*Option A - The Terminal Block type external power supply are not included. Please order the following part numbers,
as required: DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
*See page 5-8 to 5-15 for more detailed information about optional accessories (Din-Rail Power supply, Power adapter)

1-66
 Specifications
Technology Environment
Standards: Operating Temperature:
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, -10°C to 60°C (14°F to 140°F)
IEEE802.3x Storage Temperature:
Forward and Filtering Rate: -25°C to 85°C (-13°F to 185°F)
14,880pps for 10Mbps Ambient Relative Humidity:
148,810pps for 100Mbps 5% to 95% (non-condensing)
Packet Buffer Memory: Regulatory Approvals
384K bits ISO:
Processing Type: Manufactured in an ISO9001 facility
Store-and-Forward Safety:
Half-duplex back-pressure and IEEE802.3x full-duplex flow control UL60950-1, EN60950-1, IEC60950-1
Address Table Size: EMI:
2048 MAC addresses FCC Part 15, Class A
Latency: EN61000-6-3
Less than 5.1µs EN55022
Power EN61000-3-2
Input: EN61000-3-3
Input Voltage: 12 to 48VDC (Terminal Block) EMS:
Power Consumption: EN61000-6-2
2.4W Max. 0.2A@12VDC, 0.1A@24VDC, 0.05A@48VDC EN61000-4-2 (ESD Standards)
Overload Current Protection: Contact: + / - 4KV; Criteria B
Present Air: + / - 8KV; Criteria B
Reverse Polarity Protection: EN61000-4-3 (Radiated RFI Standards)
Present 10V/m, 80 to 1000MHz; 80% AM Criteria A
Mechanical EN61000-4-4 (Burst Standards)
Casing: Signal Ports: + / - 4KV; Criteria B

Ethernet Extenders
Plastic case D.C. Power Ports: + / - 4KV; Criteria B
IP30 EN61000-4-5 (Surge Standards)
Dimensions: Signal Ports: + / - 1KV; Line-to-Line; Criteria B
26mm (W) x 70mm (D) x 110mm (H) D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
(1.02" (W) x 2.76" (D) x 4.33" (H)) EN61000-4-6 (Induced RFI Standards)
Weight: Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
0.2Kg (0.44lb.) D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
Installation: EN61000-4-8 (Magnetic Field Standards)
DIN-Rail (Top hat type 35mm), Mounting 30A/m @ 50, 60Hz; Criteria A
Interface Environmental Test Compliance:
Ethernet Port: IEC60068-2-6 Fc (Vibration Resistance)
10/100Base-TX: 5, 4 or 1 ports 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
100Base-FX: 0 or 1 ports IEC60068-2-27 Ea (Shock)
LED Indicators: 25g @ 11ms (Half-Sine Shock Pulse; Operation)
Per Unit: Power Status (Power 1) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
Per Port: 10/100TX, 100FX: Link/Activity (Green), Speed (Yellow) IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)

Diagrams

26mm
113.64mm
110mm

70mm
PW
GN

R
D

76.5mm

Front Side Back Top Bottom

1- 67