DUPONT™ TYVEK® 400

TY122S WH
GARMENT TECHNICAL DATA SHEET
PRODUCT INFORMATION
DuPont™ Tyvek® 400 Coverall. Comfort Fit Design. Stormflap. Respirator Fit Hood.
ATTRIBUTES
Elastic Wrists. Attached Skid-Resistant Boots. Elastic Waist. Serged Seams. White.

TY122SWHxx0025yy (xx=size;yy=option code)

CATALOG NUMBER

When ordering, replace xx with desired size.

FULL PART FABRIC / OPTION

DESIGN SEAM COLOR QUANTITY/BOX SIZES
NUMBER MATERIAL CODES

TY122SWH Coverall w/
xx0025yy (xx Resp. Fit SM/MD,
=size;yy Tyvek® 400 Hood, Elastic Serged White 25 per case
LG, XL, 2X, 00, NF,
=option Wrists, Att. 3X, 4X, 5X, VP
Skid-Resistant 6X, 7X
code) Boots

TYPICAL FINISHED DIMENSIONS

OUTER
SLEEVE CHEST INNER
SIZE INSEAM FITS CHEST FITS HEIGHT GLOVE
LENGTH WIDTH GLOVE SIZE
SIZE

36 3/4 - 40
SM/MD 33 1/2 25 28 5'0" - 5'7" n/a n/a
This picture is for measurement reference only. 1/4
39 3/4 - 43
LG 35 26 1/2 29 5'5" - 5'9" n/a n/a
Customer Service: 1/4
42 3/4 - 46
North America 1-800-931-3456 XL 36 1/2 28 29 1/2 5'8" - 6'2" n/a n/a
1/4

SafeSPEC™ Home Page 45 1/4 - 48

2X 38 29 1/4 30 1/2 6'0" - 6'4" n/a n/a
3/4
49 1/4 - 52
3X 38 31 1/4 31 1/2 6'2" - 6'4" n/a n/a
3/4
Seams and closures have less barrier than fabric. Note: for protection from hazardous or infectious liquids,
additional barrier tests are required to establish suitability for use. CAUTION: This information is based upon 52 3/4 - 56
4X 38 1/2 33 32 1/2 6'4" - 6'7" n/a n/a
technical data that DuPont believes to be reliable. It is subject to revision as additional knowledge and 1/4
experience are gained. DuPont makes no guarantee of results and assumes no obligation or liability in
connection with this information. It is the user's responsibility to determine the level of toxicity and the proper 55 3/4 - 59
5X 39 1/2 34 1/2 33 1/2 6'7" - 6'10" n/a n/a
personal protective equipment needed. The information set forth herein reflects laboratory performance of 1/4
fabrics, not complete garments, under controlled conditions. It is intended for information use by persons
having technical skill for evaluation under the specific end-use conditions, at their own discretion and risk. 59 1/4 - 62
Anyone intending to use this information should first verify that the garment selected is suitable for the 6X 41 36 1/4 34 1/2 6'9" - 7'1" n/a n/a
3/4
intended use. In many cases, seams and closures may provide less barrier than the fabric. If the fabric
becomes torn, abraded, or punctured, end-user should discontinue use of garment to avoid compromising 61 3/4 - 65
the barrier protection. SINCE CONDITIONS OF USE ARE OUTSIDE OUR CONTROL, WE MAKE NO 7X 42 37 1/2 35 1/2 7'0" - 7'4" n/a n/a
1/4
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION NO WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE AND ASSUME NO LIABILITY IN
CONNECTION WITH ANY OF THIS INFORMATION. This information is not intended as a license to PHYSICAL PROPERTIES - FABRIC DATA Typical values, not specifications.
operate under or a recommendation to infringe any patent, trademark or technical information of DuPont or
others covering any material or its use. Data presented does not comprise a product specification.
PROPERTY TEST METHOD TYPICAL RESULT
Warning: Cleanroom apparel should not be used around heat, flames, sparks or in potentially flammable or
explosive environments. Cleanroom fabrics should have slip-resistant materials on the outer sole of boots, Thickness ASTM D1777 5.9 mils
shoe covers, or other garment surfaces in conditions where slipping could occur.
Basis Weight ASTM D3776 1.2 oz/yd2
Silicone Statement: In the past, DuPont has found that threads and zippers can be the most significant
source of silicone oil contamination in garments. DuPont specifies that thread and zippers used in DuPont™ Burst Strength - Mullen ASTM D774 50 psi
Tyvek® IsoClean® and ProClean® garments be manufactured without the use of silicone oils. For end uses
with concerns about contamination with silicone oils or any other contaminants, the best practice is to audit Seam Strength ASTM D1683 > 19 lbf
inbound materials, including garments, for those contaminants.
Breaking Strength - Grab (MD) ASTM D5034 18 lbf/in
Latex Statement: As of January 1, 2006, DuPont production specifications exclude use of components
containing natural rubber latex in the manufacture of DuPont™ Tyvek® IsoClean® and ProClean® Breaking Strength - Grab (CD) ASTM D5034 22 lbf/in
garments. Anyone who begins to exhibit allergic response during the use of DuPont products should
immediately cease using these products. The incident should also be reported to DuPont at 1.800.441.3637. Hydrostatic Head AATCC 127 45 inches H2O
Measurements are approximate values intended to assist in proper size selection. Normal variability may Surface Resistivity (25°C / 55&
result in slight differences in actual garment sizes. ASTM D257 < 6.3 x 10^9 ohms/square
RH)
Copyright © 2019 DuPont de Nemours Inc. All rights reserved. The DuPont Oval Logo, DuPont™, and all
products denoted with ® or ™ are trademarks or registered trademarks of DuPont or its affiliates. Printed Wearing Apparel Flammability 16 CFR 1610 Class 1
on: