FlowCon FN Actuators

FlowCon Electrical Actuators

Specifications
FlowCon FN.0.2
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 5VA
Control signal: Analog 0(2)-10V DC
Feedback: Yes, 0(2)-10V DC
Failsafe function: No
Autostroke: Optional
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: High
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 4 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.

Tech note · november 2013 · www.flowcon.com Page 1 of 6

Specifications (...continued)
FlowCon FN.0.3
Supply voltage: 110/230V AC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 5VA
Control signal: Digital (2-position / 3-point-floating)
Feedback: No
Failsafe function: No
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: High
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 3 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.
FlowCon FN.0.4
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 5VA
Control signal: Digital (2-position / 3-point-floating)
Feedback: No
Failsafe function: No
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: High
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 3 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.
FlowCon FN.1.2
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 6VA, 10VA peaks
Control signal: Analog 0(2)-10V DC
Feedback: Yes, 0(2)-10V DC
Failsafe function: Yes, optional open or close
Autostroke: Optional
Operation time: 50 Hz: 19 sec/mm
Actuating force: High
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 4 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.
FlowCon FN.1.4
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 6VA, 10VA peaks
Control signal: Digital (2-position / 3-point-floating)
Feedback: No
Failsafe function: Yes, optional open or close
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: High
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 4 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.

Tech note · FlowCon FN actuators · november 2013 · www.flowcon.com Page 2 of 6

Specifications (...continued)
FlowCon FN.5.2
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 5VA
Feedback: Yes, 0(2)-10V DC
Position output: 0(2)-10V DC
Failsafe function: No
Autostroke: Optional
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: Low
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 4 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.
FlowCon FN.5.4
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 5VA
Control signal: Digital (2-position / 3-point-floating)
Feedback: No
Failsafe function: No
Autostroke: Optional
Operation time: 50 Hz: 18.5 sec/mm
Actuating force: Low
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 3 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.
FlowCon FN.6.2
Supply voltage: 24V AC/DC ±10%, 50/60 Hz
Type: Electrical, Bi-directional synchronous motor
Power consumption: 6VA, 10VA peaks
Control signal: Analog 0(2)-10V DC
Feedback: Yes, 0(2)-10V DC
Failsafe function: Yes, optional open or close
Autostroke: Optional
Operation time: 50 Hz: 19 sec/mm
Actuating force: Low
Ambient temperature: -0.4°F to +122°F
Humidity rating: <95% no condensation
Protection: IP54, class II
Cable: Fixed, 4 wires 22 AWG halogen free cable, 3.28 ft
Closing point adjustment: During operation the actuator will self-adjust
according to the closing point of the valve.

Tech note · FlowCon FN actuators · november 2013 · www.flowcon.com Page 3 of 6

DIMENSIONS and WEIGHTS (NOMINAL) (measured in inch unless noted)

Weight
Actuator L W H1 H2 T (lbs.)

FN.0.X 3.62 - 0.55

FN.1.X - 4.21 0.66

4.10 2.00 M30x1.5
FN.5.X 3.62 - 0.55

FN.6.2 - 4.21 0.66

L W

L W

H1 H2

T T

FlowCon FN.0.X and FN.5.X FlowCon FN.1.X and FN.6.2

Model Number selection

FN . ______ . ______

Insert actuating force and failsafe function:

0=High (no failsafe)
1=High and failsafe
5=Low (no failsafe)
6=Low and failsafe

Insert control mode:

2=24V modulating
3=110/230V digital (only available in high actuating force version and without failsafe - first digit=0)
4=24V digital (first digit=0, 1 or 5)

Example: FN.0.2=FlowCon FN actuator 24V modulating, high actuating force without failsafe function.

Tech note · FlowCon FN actuators · november 2013 · www.flowcon.com Page 4 of 6

wiring instruction
Type FN.0.2 FN.0.2 / 1.2 / 5.2 / 6.2 Actuator
Type FN.1.2
Type FN.5.2

Green
White
Black

Red
Type FN.6.2 Feedback signal
Input signal 0(2)-10V DC
0(2)-10V DC
Power 24V AC/DC

Ground/common

Type FN.0.3 FN.0.3 Actuator

FN.0.3 Actuator
FN.0.3 Actuator
FN.0.3 Actuator
2-Position, Normally Closed 2-Position, Normally Open

White

White
Black

Black
Red

Red
Close Open Open Close

Power 110/230V AC Power 110/230V AC

Ground/common Ground/common

FN.0.3 Actuator FN.0.3 Actuator

FN.0.3 Actuator FN.0.3 Actuator
3-Point-Floating,
2-position, NC Normally Closed 3-Point-Floating,
2-position, NO Normally Open
White

White
Black

Black
Red

Red
Stop Stop
Close Open Open Close

Power 110/230V AC Power 110/230V AC

Ground/common Ground/common

Type FN.0.4 3-point-floating,

FN.0.4 NC/ 5.4 Actuator
FN.0.4 / 5.4 Actuator
3-point-floating,
FN.0.4 NC/ 5.4 Actuator
FN.0.4 / 5.4 Actuator
2-Position, Normally Closed 2-Position, Normally Open
Type FN.5.4
White

White
Black

Black
Red

Red

Close Open Open Close

Power 24V AC/DC Power 24V AC/DC

Ground/common Ground/common

FN.0.4 / 5.4 Actuator FN.0.4 / 5.4 Actuator

FN.0.4 / 5.4 Actuator FN.0.4 / 5.4 Actuator
3-Point-Floating,
2-position, NC Normally Closed 3-Point-Floating,
2-position, NO Normally Open
White

White
Black

Black
Red

Red

Stop Stop
Close Open Open Close

Power 24V AC/DC Power 24V AC/DC

Ground/common Ground/common

Type FN.1.4 3-point-floating, NC Actuator

FN.1.4
FN.1.4 Actuator
3-point-floating, NC Actuator
FN.1.4
FN.1.4 Actuator
2-Position, Normally Closed 2-Position, Normally Open
Green

Green
White

White
Black

Black
Red

Red

Close Open Open Close

Power 24V AC/DC Power 24V AC/DC

Ground/common Ground/common

FN.1.4 Actuator FN.1.4 Actuator

FN.1.4 Actuator FN.0.4 / 5.4 Actuator
3-Point-Floating,
2-position, NC Normally Closed 3-Point-Floating,
2-position, NO Normally Open
Green

Green
White

White
Black

Black
Red

Red

Stop Stop
Close Open Open Close

Power 24V AC/DC Power 24V AC/DC

Ground/common Ground/common

Tech note · FlowCon3-point-floating,

FN actuators NC · november 2013 · www.flowcon.com
3-point-floating, NC Page 5 of 6
upDATES

For latest updates please see www.flowcon.com

FlowCon International can accept no responsibility for possible errors in any printed material.
All rights reserved.

Tech note · FlowCon FN actuators · november 2013 · www.flowcon.com Page 6 of 6