Scribd
Upload
97 views10 pages

87u.qcm:: Test Object - Device Settings

This document summarizes the results of fault injection testing on a DTH 31A differential relay. Single phase faults were injected into the 33kV and 11kV sides of the relay in phases R, Y, and B. For each fault injection, the fault calculator parameters, generator settings, binary outputs, binary inputs, analog inputs, and test result are reported. The tests verify that the relay operates as expected by tripping in response to faults within the set time.

Uploaded by

Waruna Rasanjaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
97 views10 pages

87u.qcm:: Test Object - Device Settings

This document summarizes the results of fault injection testing on a DTH 31A differential relay. Single phase faults were injected into the 33kV and 11kV sides of the relay in phases R, Y, and B. For each fault injection, the fault calculator parameters, generator settings, binary outputs, binary inputs, analog inputs, and test result are reported. The tests verify that the relay operates as expected by tripping in response to faults within the set time.

Uploaded by

Waruna Rasanjaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

87U.

qcm:

Test Object - Device Settings

Substation/Bay:
Substation: GT4 Feeder Substation address: 33kV GIS
Bay: GT4 Bay address:

Device:
Name/description: DTH 31A Manufacturer: GEC
Device type: TF Differential Relay Device address: RP (400) GT2 Panel
Serial/model number: 076856L
Additional info 1: In=5A; Vx(1)=30V dc (Rext);
Vx(2)=110/125V dc;
Vx(3)=220/250V dc
Additional info 2: Id-min Setting = 15% ; Slope =
15% (All 3 Phases)

Nominal Values:
f nom: 50.00 Hz Number of phases: 3
V nom (secondary): 115.0 V V primary: 6.600 kV
I nom (secondary): 1.000 A I primary: 300.0 A

Residual Voltage/Current Factors:


VLN / VN: 1.732 IN / I nom: 1.000

Limits:
V max: 200.0 V I max: 12.00 A

Debounce/Deglitch Filters:
Debounce time: 3.000 ms Deglitch time: 0.000 s

Overload Detection:
Suppression time: 50.00 ms

Other Device Properties:


Drop-out time: 20.00 ms

Test Module
Name: OMICRON QuickCMC Version: 3.20
Test Start: 14-Jan-2020 19:24:35 Test End: 14-Jan-2020 20:07:45
User Name: Manager:
Company:

Test Results

Title: 33kV Side R phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 1.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz
Generator Settings
33kV CT_R 1.000A 0.00° +90°
33kV CT_Y 0.000A -120.00°
33kV CT_B 0.000A 120.00°
11kV CT_R 0.000A 0.00°
33kV CT_R
11kV CT_Y 0.000A -120.00° 180° 0°
11kV CT_B 0.000A 120.00°

1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.080s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
0.0000V -0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:25:11

Title: 33kV Side Y phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 1.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 1.000A -120.00°
33kV CT_B 0.000A 120.00°
11kV CT_R 0.000A 0.00°
11kV CT_Y 0.000A -120.00° 180° 0°
11kV CT_B 0.000A 120.00°

V CT_Y
1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.178s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0000V -0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:25:26

Title: 33kV Side B phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 1.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 0.000A -120.00° V CT_B
33kV CT_B 1.000A 120.00°
11kV CT_R 0.000A 0.00°
11kV CT_Y 0.000A -120.00° 180° 0°
11kV CT_B 0.000A 120.00°

1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.090s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
0.0000V -0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)


Assessment
Passed 14-Jan-2020 19:25:45

Title: 11kV Side R phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 0.000A -120.00°
33kV CT_B 0.000A 120.00°
11kV CT_R 1.000A 0.00°
11kV CT_R
11kV CT_Y 0.000A -120.00° 180° 0°
11kV CT_B 0.000A 120.00°

1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.080s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0000V 0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:26:08

Title: 11kV Side Y phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz
Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 0.000A -120.00°
33kV CT_B 0.000A 120.00°
11kV CT_R 0.000A 0.00°
11kV CT_Y 1.000A -120.00° 180° 0°
11kV CT_B 0.000A 120.00°

V CT_Y
1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.087s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0000V -0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:26:23

Title: 11kV Side B phase injection

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 0.000A -120.00° V CT_B
33kV CT_B 0.000A 120.00°
11kV CT_R 0.000A 0.00°
11kV CT_Y 0.000A -120.00° 180° 0°
11kV CT_B 1.000A 120.00°

1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.090s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
0.0000V -0.0000mA

Comment
Channel Healthy. Trip OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:26:38

Title: Balnced Currents

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 1.000 A 0.00 ° 50.000 Hz
33kV CT_Y 1.000 A -120.00 ° 50.000 Hz
33kV CT_B 1.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 1.000A 0.00° +90°
33kV CT_Y 1.000A -120.00° V CT_B 11kV C
33kV CT_B 1.000A 120.00°
11kV CT_R 1.000A 180.00°
11kV CT_R 33kV CT_R
11kV CT_Y 1.000A 60.00° 180° 0°
11kV CT_B 1.000A 300.00°

V CT_Y 11kV C
1.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0
Start 0
Overload 0

Analog Inputs
VDCin IDCin
-0.0001V -0.0001mA

Comment

Synchronized mode (Synchronization to external signal failed)


Assessment
Passed 14-Jan-2020 19:28:00

Title: Balnced Currents

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 5.000 A 0.00 ° 50.000 Hz
33kV CT_Y 5.000 A -120.00 ° 50.000 Hz
33kV CT_B 5.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 5.000A 0.00° +90°
33kV CT_Y 5.000A -120.00° V CT_B 11kV C
33kV CT_B 5.000A 120.00°
11kV CT_R 5.000A 180.00°
11kV CT_R 33kV CT_R
11kV CT_Y 5.000A 60.00° 180° 0°
11kV CT_B 5.000A 300.00°

V CT_Y 11kV C
5.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0
Start 0
Overload 0

Analog Inputs
VDCin IDCin
-0.0001V -0.0001mA

Comment
OK

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:28:25

Title: Id Min

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 790.0 mA 0.00 ° 50.000 Hz
33kV CT_Y 790.0 mA -120.00 ° 50.000 Hz
33kV CT_B 790.0 mA 120.00 ° 50.000 Hz
Generator Settings
33kV CT_R 0.790A 0.00° +90°
33kV CT_Y 0.790A -120.00° V CT_B
33kV CT_B 0.790A 120.00°
11kV CT_R 0.000A 180.00°
33kV CT_R
11kV CT_Y 0.000A 60.00° 180° 0°
11kV CT_B 0.000A 300.00°

V CT_Y
800.0 mA-90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.038s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0000V -0.0001mA

Comment
15% (750 mA) OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:29:52

Title: Id Min

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 0.000 A 0.00 ° 50.000 Hz
33kV CT_Y 0.000 A -120.00 ° 50.000 Hz
33kV CT_B 0.000 A 120.00 ° 50.000 Hz

Generator Settings
33kV CT_R 0.000A 0.00° +90°
33kV CT_Y 0.000A -120.00° 11kV C
33kV CT_B 0.000A 120.00°
11kV CT_R 0.780A 180.00°
11kV CT_R
11kV CT_Y 0.780A 60.00° 180° 0°
11kV CT_B 0.780A 300.00°

11kV C
800.0 mA-90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.104s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0001V 0.0000mA

Comment
15% (750 mA) OK;

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 19:30:31

Title: Stability - 0.4 In

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 4.000 A 11.50 ° 50.000 Hz
33kV CT_Y 4.000 A -108.50 ° 50.000 Hz
33kV CT_B 4.000 A 131.50 ° 50.000 Hz

Generator Settings
33kV CT_R 4.000A 11.50° +90°
33kV CT_Y 4.000A -108.50° 11kV C
CT_B
33kV CT_B 4.000A 131.50°
11kV CT_R 4.000A 180.00° 33kV CT_R
11kV CT_R
11kV CT_Y 4.000A 60.00° 180° 0°
11kV CT_B 4.000A 300.00°

3kV 11kV C
4.0 CT_Y
A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.042s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
0.0000V 0.0000mA

Comment
OK

Synchronized mode (Synchronization to external signal failed)


Assessment
Passed 14-Jan-2020 19:35:58

Title: Stability - 1.2 In

Fault Calculator:
Table Inputmode Parameters (All values are secondary)
Direct 33kV CT_R 6.000 A 9.70 ° 50.000 Hz
33kV CT_Y 6.000 A -110.30 ° 50.000 Hz
33kV CT_B 6.000 A 129.70 ° 50.000 Hz

Generator Settings
33kV CT_R 6.000A 9.70° +90°
33kV CT_Y 6.000A -110.30°
33kV CT_B 6.000A 129.70° V CT_B 11kV CT
11kV CT_R 6.000A 180.00° 33kV CT_R
11kV CT_R
11kV CT_Y 6.000A 60.00° 180° 0°
11kV CT_B 6.000A 300.00°

3kV CT_Y 11kV CT

8.0 A -90°

Binary Outputs
Name State
Bin. out 1 0
Bin. out 2 0
Bin. out 3 0
Bin. out 4 0

Binary Inputs
Name Slope Time
Trip OP (3,4_N/O) 0->1 0.046s
Start 1->0 n/a
Overload 1->0 n/a

Analog Inputs
VDCin IDCin
-0.0000V -0.0001mA

Comment
OK

Synchronized mode (Synchronization to external signal failed)

Assessment
Passed 14-Jan-2020 20:02:44

Comment

Summary
12 tests passed, 0 tests failed, 0 tests not assessed 100.00% passed
Test passed
Overload occurred during
testing!

You might also like