Scribd Logo
Upload

Welcome to Scribd!

  • 20 views

    Ballscrew Product Specifications 11 12

    Uploaded by

    harry
    This document describes methods for measuring the accuracy of various parts of a ball screw assembly. It involves using V-blocks to support the screw shaft and a dial gauge with probe to measure run-out, perpendicularity, and parallelism as the screw shaft and nut are rotated. Tables 5-8 show specifications for maximum allowable error measurements on dimensions like perpendicularity of the screw shaft to its axis and radial run-out of the nut circumference. The methods ensure accurate measurement of ball screw assembly parts within specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ballscrew Product Specifications 11 12

    Uploaded by

    harry
    20 views2 pages
    This document describes methods for measuring the accuracy of various parts of a ball screw assembly. It involves using V-blocks to support the screw shaft and a dial gauge with probe to measure run-out, perpendicularity, and parallelism as the screw shaft and nut are rotated. Tables 5-8 show specifications for maximum allowable error measurements on dimensions like perpendicularity of the screw shaft to its axis and radial run-out of the nut circumference. The methods ensure accurate measurement of ball screw assembly parts within specified tolerances.

    Original Description:

    bat10

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes methods for measuring the accuracy of various parts of a ball screw assembly. It involves using V-blocks to support the screw shaft and a dial gauge with probe to measure run-out, perpendicularity, and parallelism as the screw shaft and nut are rotated. Tables 5-8 show specifications for maximum allowable error measurements on dimensions like perpendicularity of the screw shaft to its axis and radial run-out of the nut circumference. The methods ensure accurate measurement of ball screw assembly parts within specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    20 views2 pages

    Ballscrew Product Specifications 11 12

    Uploaded by

    harry
    This document describes methods for measuring the accuracy of various parts of a ball screw assembly. It involves using V-blocks to support the screw shaft and a dial gauge with probe to measure run-out, perpendicularity, and parallelism as the screw shaft and nut are rotated. Tables 5-8 show specifications for maximum allowable error measurements on dimensions like perpendicularity of the screw shaft to its axis and radial run-out of the nut circumference. The methods ensure accurate measurement of ball screw assembly parts within specified tolerances.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Table 5 Perpendicularity of the Supporting Portion End of Table 6 Perpendicularity of the Flange Mounting Surface

    the Screw Shaft to the Supporting Portion Axis of the Screw Shaft to the Screw Shaft Axis
    Unit: μm Unit: μm
    Screw shaft
    outer diameter (mm) Perpendicularity (Maximum) Nut outer diameter (mm) Perpendicularity (Maximum)

    Above Or less C0 C1 C2 C3 C5 C7 Above Or less C0 C1 C2 C3 C5 C7


    — 8 2 3 3 4 5 7 — 20 5 6 7 8 10 14
    8 12 2 3 3 4 5 7 20 32 5 6 7 8 10 14
    12 20 2 3 3 4 5 7 32 50 6 7 8 8 11 18
    20 32 2 3 3 4 5 7 50 80 7 8 9 10 13 18
    32 50 2 3 3 4 5 8 80 125 7 9 10 12 15 20
    50 80 3 4 4 5 7 10 125 160 8 10 11 13 17 20
    80 100 — 4 5 6 8 11 160 200 — 11 12 14 18 25

    Table 7 Radial Run-out of the Nut Circumference Table 8 Parallelism of the Nut Circumference (Flat
    in Relation to the Screw Shaft Axis Mounting Surface) to the Screw Shaft Axis
    Unit: μm Unit: μm
    Mounting reference
    Nut outer diameter (mm) Run-out (Maximum) length (mm) Parallelism (Maximum)
    Above Or less C0 C1 C2 C3 C5 C7 Above Or less C0 C1 C2 C3 C5 C7
    — 20 5 6 7 9 12 20 — 50 5 6 7 8 10 17
    20 32 6 7 8 10 12 20 50 100 7 8 9 10 13 17
    32 50 7 8 10 12 15 30 100 200 — 10 11 13 17 30
    50 80 8 10 12 15 19 30
    80 125 9 12 16 20 27 40
    125 160 10 13 17 22 30 40
    160 200 — 16 20 25 34 50

    3.2.2. Method for Measuring Accuracy of the Mounting Section


    ●Radial Run-out of the Circumference of the Part Mounting Section in
    Relation to the Supporting Portion Axis of the Screw Shaft (Table 4)
    Support the supporting portion of the screw shaft with V blocks. Place a probe on the circum-
    ference of the part mounting section, and read the largest difference on the dial gauge as a
    measurement when turning the screw shaft by one revolution.

    Dial gauge

    V block V block

    Surface table

    k-12
    k. Dimensions of the Ball Screw

    ●Radial Run-out of the Circumference of the Thread Root in


    Relation to the Support Portion Axis of the Screw Shaft (Table 4)
    Support the supporting portion of the screw shaft with V blocks. Place a probe on the circum-
    ference of the nut, and read the largest difference on the dial gauge as a measurement when
    turning the screw shaft by one revolution without turning the nut.

    Dial gauge

    Accuracy of the Ball Screw


    V block V block

    Surface table

    ●Perpendicularity of the Supporting Portion End of the


    Screw Shaft to the Supporting Portion Axis (Table 5)
    Support the supporting portion of the screw shaft with V blocks. Place a probe on the
    screw shaft's supporting portion end, and read the largest difference on the dial gauge
    as a measurement when turning the screw shaft by one revolution.

    k
    13
    Dial gauge

    V block V block

    Surface table

    ●Perpendicularity of the Flange Mounting Surface of the


    Screw Shaft to the Screw Shaft Axis (Table 6)
    Support the nut of the screw shaft with V blocks. Place a probe on the flange end,
    and read the largest difference on the dial gauge as a measurement when simulta-
    neously turning the screw shaft and the nut by one revolution.

    Dial gauge

    V block V block
    Surface table

    k-13

    You might also like