Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Ballscrew Product Specifications 24 25

    Uploaded by

    harry
    This document discusses lubrication for ball screws. It describes how a QZ Lubricator can significantly extend maintenance intervals by continuously feeding lubricant over long periods. The QZ Lubricator is also more environmentally friendly than forced lubrication systems as it only uses the necessary amount of lubricant. The document provides a guideline table for the proper feed amount of oil lubricant for different shaft diameters to avoid insufficient or excessive lubrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ballscrew Product Specifications 24 25

    Uploaded by

    harry
    24 views2 pages
    This document discusses lubrication for ball screws. It describes how a QZ Lubricator can significantly extend maintenance intervals by continuously feeding lubricant over long periods. The QZ Lubricator is also more environmentally friendly than forced lubrication systems as it only uses the necessary amount of lubricant. The document provides a guideline table for the proper feed amount of oil lubricant for different shaft diameters to avoid insufficient or excessive lubrication.

    Original Description:

    bat4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses lubrication for ball screws. It describes how a QZ Lubricator can significantly extend maintenance intervals by continuously feeding lubricant over long periods. The QZ Lubricator is also more environmentally friendly than forced lubrication systems as it only uses the necessary amount of lubricant. The document provides a guideline table for the proper feed amount of oil lubricant for different shaft diameters to avoid insufficient or excessive lubrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    Ballscrew Product Specifications 24 25

    Uploaded by

    harry
    This document discusses lubrication for ball screws. It describes how a QZ Lubricator can significantly extend maintenance intervals by continuously feeding lubricant over long periods. The QZ Lubricator is also more environmentally friendly than forced lubrication systems as it only uses the necessary amount of lubricant. The document provides a guideline table for the proper feed amount of oil lubricant for different shaft diameters to avoid insufficient or excessive lubrication.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    k.

    Dimensions of the Ball Screw

    ■Significantly extended maintenance interval


    Since QZ Lubricator continuously feed a lubricant over a long period, the maintenance interval
    can be significantly extended.

    QZ Lubricator +
    Still traveling at 3,500 km
       AFA Grease

    QZ Lubricator only Still traveling at 1,500 km

    No lubrication Oxidized wear dust generated at 100 km

    0 500 1000 1500 2000 2500 3000 3500

    Lubrication
    Distance traveled km (linear travel distance)

    Ball Screw BIF2505-5


    Rotation speed 3000min–1
    Stroke 500mm

    k
    Load 0.46 kN (with an internal preload)

    23
    ■Environmentally friendly lubrication system
    Since QZ Lubricator feeds the right amount of lubricant directly to the raceway, the lubricant
    can effectively be used without waste.

    Model No.: BNFN3612-5G0+1500LC5


    Travel speed: 20km/day
    32 Travel distance:2500km
    QZ Lubricator

    Forced lubrication 15000

    0 5000 10000 15000


    Amount of oil cm3

    QZ Lubricator + AFA Grease Forced lubrication


    32 cm3 Comparison 0.25cm3/3min×24hour×125day
    (QZ Lubricator attached to both ends of
    the ball screw nut) ＝15000cm3

    k-23
    9.2. Amount of Lubricant

    If the amount of lubricant to the Ball Screw is insufficient, it may cause oil film breakdown, and
    if it is excessive, it may cause heat to be generated and resistance to be increased. It is nec-
    essary to select an amount that meets the service conditions.

    Grease
    The feed amount of grease is generally approximately one third of the special volume inside the
    nut.

    Oil
    Table 1 shows a guideline for the feed amount of oil.
    Note, however, that the amount varies according to the stroke, oil type and service conditions
    (e.g., suppressed heat generation).

    Table 1 Guideline for the Feed Amount of Oil


    (Interval: 3 minutes)
    Shaft diameter (mm) Amount of lubricant (cc)
    4 to 8 0.03
    10 to 14 0.05
    15 to 18 0.07
    20 to 25 0.1
    28 to 32 0.15
    36 to 40 0.25
    45 to 50 0.3
    55 to 63 0.4
    70 to100 0.5

    k-24

    You might also like