8.4 Changes in Matter: Hot Ice and The Carbon Snake: Grade 8 Activity Plan
8.4 Changes in Matter: Hot Ice and The Carbon Snake: Grade 8 Activity Plan
8.4 Changes in Matter: Hot Ice and The Carbon Snake: Grade 8 Activity Plan
1
Reviews and Updates
- Hot Ice and Carbon Snake Activity add by Fola Akpan in July 2017
2
8.4 Changes in Matter: Hot Ice and the Carbon Snake
Objectives:
1. To know the science behind, and be acquainted with, natural and artificial
occurrences of phase changes.
2. To understand the differences between physical changes and chemical
changes
3. To understand combustion, supercooling and supersaturation
3
Segment Details
African Proverb
and Cultural “Don’t take another mouthful before you have swallowed what
Relevance is in your mouth.” Madagascar
(5 min.)
Post-test
Oral Question and answer session
(10 min.)
Suggested interpretation of proverb: One needs to always have their priorities right. It is
not good to rush. Concentrate on what is present and necessary. As seen in the
activity, the engine would eject steam before sucking in more water into it.
4
BACKGROUND INFORMATION
Heat energy is the energy produced by the moving atoms or molecules. Heat is produced from
the movement of molecules. The faster the molecules move the more heat is produced. The
heat energy created can be used to produce other forms of energy, such as steam energy,
kinetic energy or chemical energy.
When heat is applied to a water molecule, the atoms begin to move very rapidly around it. The
change of state from a liquid to a gas takes place when the energized, moving molecule of
water takes to the air because of its quickly moving electrons.
Physical changes of matter are changes in the form of a substance, but not the chemical
composition
Chemical changes of matter are changes in the chemical composition of matter
In the hot ice experiment, the sodium acetate is used to show how supercooling and
supersaturation work together. A supersaturated is a solution in which the solute is more than
the solvent. In this case the solute is the Sodium Acetate and the solvent is the water. A
supercooled solution is a liquid is chilled below its freezing point. This experiment is an
example of a physical change and a phase change.
In the black carbon snake experiment, the sugar and baking soda demonstrate the concept of
combustion. Combustion is the process of burning matter. When the sugar and baking soda in
the experiment combusts, they is chemically changed into water vapour, sodium carbonate and
carbon dioxide. The pressure created by the carbon dioxide pushes the sodium carbonate out,
which creates the black carbon snake. This reaction is referred to as the dehydration of sugar.
Both experiments are examples of exothermic reactions, which produce heat. In the hot ice
experiment, bond formation causes the exothermic reaction. In the carbon snake experiment,
combustion causes the exothermic reaction because energy is released.
Additional Information
https://www.sciencedaily.com/terms/supercooling.htm
https://www.thoughtco.com/make-black-snakes-or-glow-worms-605964
https://eic.rsc.org/exhibition-chemistry/hot-ice/2000049.article
5
Activity 1- Hot Ice: Sodium Acetate
Source: http://www.livestrong.com/article/251878-an-explanation-of-sodium-acetate-hot-ice/
Purpose: To understand the science behind, and be acquainted with, natural and artificial occurrences of
phase changes, supersaturation and supercooling
Note: It is advised that the mentor prepare and test the solution beforehand
Item Quantity (10 students)
Baking Soda 3 Tablespoons
Vinegar 1 Liter
Hot Plate 1
Pot 1
Mason Jar 2
Gloves 10
Procedure:
NOTE: Make sure that all of your equipment is clean since other particles can affect the
outcome of the solution
1. Measure out 3 tablespoons of Baking Soda and put it into the pot
2. Measure out 1 Liter of Vinegar and pout it slowly into the pot
3. Stir the baking soda and vinegar together until there are no undissolved baking
soda particles
(NOTE: It is very important that the mixture is completely clear)
4. Boil the solution until the first trace of film appears on the surface of the solution,
then take the pot off heat immediately (NOTE: It is very important that the
mixture is not overcooked and does not burn but there is a way to fix the solution
if a problem does occur)
5. As the water is boiling, scrape off the crystals that form on the side of the pot.
These crystals will be used to activate the hot ice
6. Pour the solution into a mason jar and seal the mason jar
7. Chill the solution in the fridge or in an ice water bath until the temperature is
slightly below room temperature
8. Place the crystals into the solution. This is when the hot ice starts to form.
NOTE: If the hot ice doesn’t form, then the solution was made incorrectly. To fix this, add
more vinegar to your original solution and redo steps 4 -8.
Additional Information
https://www.youtube.com/watch?v=Yxk3OZWq9Ls
Contains Hot Ice troubleshooting information
6
Activity 2 – Carbon Snake
Source: https://www.youtube.com/watch?v=Hibxz9_ZW18
https://melscience.com/en/experiments/sugar-snake/
Procedure:
1. Fill the bowl about 4/5th with sand
2. Mix together 1 tsp of baking soda and 4 tsp of powdered sugar
3. Make a hole in the sand and put about 50 mL of ethanol into the bowl
4. Place the sugar mixture into the hole in the sand
5. Light it on fire and watch the carbon snake form!