Kline

K-line Mini-contactors,
Enclosed Starters,
Overload Relays, and Accessories
Class 8502
CONTENTS
Description Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Mini-contactors
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Auxiliary Contacts and Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Overload Relays
Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Dimensions, Mounting, and Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Low-consumption Mini-contactors
Schneider Electric Brands Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Auxiliary Contacts, Timers, and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Dimensions and Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
K-line Mini-contactors, Enclosed Starters, Overload Relays, and Accessories
General Information
K-line Mini-contactors, Enclosed Starters, and Overload Relays are ideal for general-duty applications
where small size and reliability are key concerns. They feature:
• Three contactor ratings for the USA market:
— K06 rated for 3 HP motors at 480 Vac or 600 Vac.
— K09 rated for 5 HP motors at 480 Vac or 600 Vac.
— K12 rated for 7.5 HP motors at 480 Vac or 10 HP at 600 Vac.
• Space savings — the special magnet and armature structure allow for a DC coil-operated device with
the same physical size and panel footprint of the AC coil version.
• IP20-rated touch-safe terminals with both North American and International terminal markings
• Mountable on 35mm DIN rail or panel mount with screws
• Available in 3-pole contactor versions with built-in auxiliary contact for holding circuit or 4-pole
contactor versions.
• Easily-installed accessories.
— 2-pole or 4-pole instantaneous auxiliary contact blocks with screw clamp, slip-on, or spring
terminals.
— Transient voltage surge suppressors.
— Electronic 1 to 30 second on-delay timers.
• Four wiring methods to reduce installation time:
— Captive screw terminals for use with either Phillips or slotted head screwdrivers.
— Slip-on terminals for quick installation of single 1/4" or double 1/8" tabs.
— Terminal pins for soldering the contactor directly to a printed circuit board.
— Spring terminals for extreme-vibration applications.
• Control circuit flexibility
All versions of the K-line mini-contactors are available with an AC, DC, or low-consumption DC
operating coil. The low-consumption DC coil operating device can be energized by a low level DC
signal from a computer or PLC and includes built-in transient suppression and LED “On” indicator.
• Bimetallic overload relays
The K-line Class 10 bimetallic overload relays are ambient-compensated and include single-phase
sensitivity for phase unbalance and phase loss protection. Standard features include isolated N/C trip
contact and N/O alarm contact, manual or automatic reset function, tamper resistant window for full
load current settings, and Test trip button. Five pins connect to the contactor load side terminals —
three for the power circuit and two for the control circuit — which eliminate customer wiring for the 3-
wire control holding circuit.
34
© 2001 Schneider Electric All Rights Reserved 04/01
Characteristics of Type LC•K and LP•K Contactors
Environment
Conforming to IEC 60947 V 690
Conforming to VDE 0110 gr C V 750

Rated insulation voltage (Vi)
Conforming to BS 5424, NF C 20-040 V 690
Conforming to CSA 22-2 No. 14, UL 508 V 600
Rated impulse withstand voltage (Vimp) kV 8
Meets the essential requirements

Conforming to standards of the LV IEC 60947, NF C 63-110, VDE 0660, BS 5424, UL508, CSA 22-2 No. 14
& EMC directives
E164862 E164862
LC•K06, LC•K09, LC•K12 NLDX NLDX2 LR 43364
Approvals 321104
LP•K06, LP•K09, LP•K12 (Screw (Slip-on &
Clamp) Solder Pin)
Protective treatment Conforming to IEC 60068 (DIN 50016) “TC” (Fungus-proof, tropicalization protection)
Degree of protection Conforming to VDE 0106 Protection against direct finger contact
Ambient air temperature Storage - 50° to + 80°C (-58° to +176°F)

around the device Operation - 25° to + 50°C (-13° to +122°F)
Maximum operating altitude Without derating 2000 m (6562 ft.)
Vertical axis Horizontal axis
90
90
90
°
°
18 0 °
Operating position
°
90
Without derating Without derating Derate current carrying capability by 15% when
not mounted vertically
Conforming to UL 94 Self-extinguishing material V1

Flame resistance
Conforming to NF F 16-101 and 16-102 Conforming to requirement 2
Shock resistance Contactor open 10 gn

(1/2 sine wave, 11 ms) Contactor closed 15 gn
Vibration resistance Contactor open 2 gn

5 to 300 Hz Contactor closed 4 gn
Safe circuit separation Conforming to VDE 0106 and IEC 60536 SELV ◆, up to 400 V
Cabling Min Max Max to IEC 60947
Solid or stranded cable AWG 1 x 18 2 x 14 or 1 x 12 —
Solid cable mm2 1 x 1.5 2x4 1 x 4 + 1 x 2.5

Screw-clamp terminals
Stranded cable without cable end mm2 1 x 0.75 2x4 2 x 2.5
Stranded cable with cable end mm2 1 x 0.34 1 x 1.5 + 1 x 2.5 1 x 1.5 + 1 x 2.5
Slip-on connectors Clip 2 x 2.8mm or 1 x 6.35mm (2 x 0.110 in. or 1 x 0.250 in.)
Solder pins for With locating device between power

4 mm x 35 microns
printed circuit board and control circuits
Tightening torque Phillips no. 2 or 3/16” slotted head screwdriver 0.8 N•m (7lb.-in.)
Conforming to standards
Terminal referencing Up to 5 contacts
EN 50005 and EN 50012
◆ Safety extra low voltage.
35
04/01 © 2001 Schneider Electric All Rights Reserved
Pole Characteristics
Conventional thermal current (Ith) For ambient temperature ≤ 50 °C (122 °F) 20 A
Rated operational frequency 50/60 Hz
Frequency limits of the

Up to 400 Hz
operational current
Rated operational voltage (Ve) 690 Vac
I rms conforming to NF C 63-110 and IEC 60947

110 A
LC•K06, LPI•K06, LC•K09, LP•K09
Rated making capacity
LC•K12, LP•K12 144 A
LC•K16 160 A
Conforming to NF C 63-110 and IEC 60947 220/ 380/ 660/

415 V 440 V 500 V
230 V 400 V 690 V
Rated breaking capacity LC•K06, LP•K06, LC•K09, LP•K09 I rms 110 A 110 A 110 A 110 A 80 A 70 A
LC•K12, LP•K12 – – – 110 A 80 A 70 A
LC•K16 – – – 110 A 80 A 70 A
In free air for a time "t” from cold state ≥ 15

1s 5s 10 s 30 s 1 min 3 min
(θ ≤ 50 °C [122 °F]) min
Permissible short-time rating
LC•K06, LP•K06, LC•K09, LP•K09 90 A 85 A 80 A 60 A 45 A 40 A 20 A
LC•K12, LP•K12 LC•K16 115 A 105 A 100 A 75 A 55 A 50 A 25 A
By circuit breaker Select in accordance with NEC and local codes

Short-circuit protection
By fuses Max 400% of motor FLA
Average impedance/pole At Ith and 50 Hz 3 mΩ
Maximum rated operational current for a

20 A
temperature ≤ 50 °C (122 °F)
Maximum rated operational current for a

16 A for Ve only
On-load factor 90% 60% 30%
Rated operational current limits in relation to 300 op. cycles/hour 13 A 15 A 18 A

Utilization in category AC-1: on-load factor and operating frequency 120 op. cycles/hour 15 A 18 A 19 A
resistive circuit, heating, lighting
(Ve ≤ 440 V) 30 op. cycles/hour 19 A 20 A 20 A
Apply the following coefficients to the current values given

above. These take into account the often unbalanced current
distribution between poles
Increase in operational current by
paralleling of poles 2 poles in parallel: K = 1.60
3 poles in parallel: K = 2.25

220/ 380/ 440/ 500/ 660/
Operational power Voltage 115 V 220 V
240 V 415 V 480 V 600 V 690 V
according to the voltage 50 or 60 Hz
1-phase 3-phase
0.37 0.75
LC•K06, LP•K06 Motor ratings 1.5 kW 2.2 kW 3 kW 3 kW 3 kW
kW kW
0.55
LC•K09, LP•K09 Motor ratings 1.1 kW 2.2 kW 4 kW 4 kW 4 kW 4 kW
kW
Utilization in category AC-3
Squirrel cage motors 5.5/4
LC•K12, LP•K12 Motor ratings – – 3 kW 5.5 kW (480) 4 kW 4 kW
kW
5.5/4
LC•K16 Motor ratings – – 4 kW 7.5 kW (480) 4 kW 4 kW
kW
Maximum operating rate (in operating cycles/ Op. cycles/hour 600 900 1200
hour in relation to percentage of rated power) Power 100% 75% 50%
220/ 220/ 460/ 575/

Operational power Voltage 115 220
208 240 480 600
according to the voltage 50 or 60 Hz
1-phase 3-phase
Utilization in category AC-3 LC•K06, LP•K06 Motor ratings 0.5 HP 1 HP 1.5 HP 3 HP 3 HP 3 HP
Squirrel cage motors
LC•K09, LP•K09 Motor ratings 0.5 HP 1.5 HP 2 HP 3 HP 5 HP 5 HP
LC•K12, LP•K12 Motor ratings 1 HP 2 HP 3 HP 3 HP 7.5 HP 10 HP
LC•K16, LP•K16 Not UL Listed or CSA Certified.
36
Control Circuit Characteristics

Type LC1 LC2 LC7 LC8 LP1 LP2
Rated control circuit voltage (Vc) 12 to 690 Vac ◆ 24 to 230 Vac 12 to 250 Vdc ◆
Control voltage limits For operation ▲ 0.8 to 1.15 Vc 0.85 to 1.1 Vc 0.8 to 1.15 Vc
(≤ 50 °C [122 °F]) single voltage coil For drop-out ≥ 0.20 Vc ≥ 0.10 Vc ≥ 0.10 Vc
Inrush 30 VA 3 VA 3W
Average consumption at 20 °C (68 °F) and at Vc
Sealed 4.5 VA 3 VA 3W
Heat dissipation 1.3 3 3
Between coil energization and:
- opening of the N/C contacts 5 to 15 ms 25 to 35 ms 25 to 35 ms
- closing of the N/O contacts 10 to 20 ms 30 to 40 ms 30 to 40 ms

Operating time at 20 °C (68 °F) and at Vc
Between coil de-energization and:
- opening of the N/O contacts 10 to 20 ms 30 ms 10 ms
- closing of the N/C contacts 15 to 25 ms 40 ms 15 ms
Maximum immunity to micro-breaks 2 ms 2 ms 2 ms
Maximum operating rate In operating cycles per hour 3600 3600 3600
Mechanical durability at Vc 50/60 Hz coil 10 5 10 5 – –

In millions of operating cycles DC coil – – – – 10 5
◆ For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or
LAFKE1UG (130 to 250 V); see page 52.
▲ LC1K16: 0.85 to 1.15 Vc.
37
Auxiliary Contact Characteristics and Instantaneous Contact Blocks
On LC•K or LP•K 1
Number of contacts
On LA1K 2 or 4
Rated operational voltage (Ve) Up to 690 Vac
Conforming to BS 5424 690 Vac
Conforming to IEC 60947 690 Vac

Conforming to VDE 0110 group C 750 Vac
Conforming to CSA C 22.2 No.14, UL 508 600 Vac
Conventional thermal current (lth) For ambient temperature ≤ 50 °C (122 °F) 10 A
Frequency of operational current Up to 400 Hz
V min (DIN 19 240) 17 Vac

Minimum switching capacity
I min 5 mA
Short-circuit protection Conforming to IEC 60947 and VDE 0660, gl fuse 10 A
Rated making capacity Conforming to IEC 60947 I rms 110 A
1s 80 A
Overload current Permissible for 500 ms 90 A
100 ms 110 A
Insulation resistance > 10 mΩ
Non-overlap distance Linked contacts conforming to INRS and BIA spec. 0.5 mm
Operational power of contacts AC supply, category AC-15 DC supply, category DC-13

conforming to IEC 60947
Electrical durability (valid up to 3600 operating cycles Electrical durability (valid up to 1200 operating cycles
per hour) on an inductive load such as the coil of an per hour, on an inductive load such as the coil of an
electromagnet: making current (power factor 0.7) = 10 electromagnet, without economy resistor, the time
times the breaking current (power factor 0.4). constant increasing with the load.
110/ 220/ 600/

V 24 48 440 V 24 48 110 220 440 600
127 230 690
1 million operating cycles VA 48 96 240 440 880 1200 W 120 80 60 52 51 50
Occasional making capacity VA 1000 2050 5000 10000 13000 9000 W 720 600 400 300 230 200
Power in broken VA Power in broken W
16 000
10 000 1000
Time constant
4
1 Breaking limit of contacts valid for 8000
6000 700
maximum of 50 operating cycles at 10 s 5000
1 500
in ms
4000
intervals (breaking current = making 3
3000 300
current x power factor 0.7).
2000
250 200
2 Electrical durability of contacts for:
- 1 million operating cycles (2a) 1000 4
800 200 100
- 3 million operating cycles (2b) 600 80 2a
-10 million operating cycles (2c). 500 60
400 140 50
3 Breaking limit of contacts valid for 300 40 2b
2a 100 30
maximum of 20 operating cycles at 10 s 200
intervals with current passing for 0.5 s 20
per operating cycle. 100

2b 2c
80 2c 50 10
4 Thermal limit. 60
8
40 6
24 48 110 220 380 500 20
120 440 690 V 12 24 48 110 220 440 600 V
38
Selection of Contactors for Motor Control
General-purpose Contactors for AC Control Circuits
The table below shows general-purpose contactors. The contactors mount on 35 mm DIN rails or with
4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 50 to 53.
Horsepower Ratings for North American Applications Kilowatt Ratings for International Applications Auxiliary
Maximum Horsepower Rating Standard power ratings of 3-phase Contacts
Category AC-3, 50/60 Hz motors, 50/60 Hz in category AC-3 Rated
Max. Catalog
operational
1-Phase 3-Phase Inductive Type of Connection Number Weight lb. (kg)
220 V 380 V 440/500 V current,
Current ▼▲
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V up to 440 V
120 V 240 V 208 V 240 V 480 V 600 V
HP HP HP HP HP HP A kW kW kW A N/O N/C
1 – LC1K0610•• 0.40 (0.180)
Screw clamp
– 1 LC1K0601•• 0.40 (0.180)
Slip-on 1 x 0.25 in., or 1 – LC1K06107•• 0.40 (0.180)
2 x 0.11 in. – 1 LC1K06017•• 0.40 (0.180)
0.5 1 1.5 1.5 3 3 6 1.5 2.2 3 6
Solder pins for 1 – LC1K06105•• 0.46 (0.210)
printed circuit board – 1 LC1K06015•• 0.46 (0.210)
1 – LC1K06103•• 0.40 (0.180)
Spring terminals
– 1 LC1K06013•• 0.40 (0.180)
1 – LC1K0910•• 0.40 (0.180)
Screw clamp
– 1 LC1K0901•• 0.40 (0.180)
Slip-on 1 x 0.25 in., 1 – LC1K09107•• 0.40 (0.180)
or 2 x 0.11 in. – 1 LC1K09017•• 0.40 (0.180)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
1 – LC1K09103•• 0.40 (0.180)
Spring terminals
– 1 LC1K09013•• 0.40 (0.180)
1 – LC1K1210•• 0.40 (0.180)
Screw clamp
– 1 LC1K1201•• 0.40 (0.180)
Slip-on 1 x 0.25 in., 1 – LC1K12107•• 0.40 (0.180)
or 2 x 0.11 in. – 1 LC1K12017•• 0.40 (0.180)
4 (> 440)
0.5 1.5 3 3 7.5 10 12 3 5.5 12
5.5 (440) 1 – LC1K12105•• 0.46 (0.210)
Solder pins for
1 – LC1K12103•• 0.40 (0.180)
Spring terminals
– 1 LC1K12013•• 0.40 (0.180)
1 – LC1K1610•• 0.40 (0.180)
Screw clamp
– 1 LC1K1601•• 0.40 (0.180)
Slip-on 1 x 0.25 in., 1 – LC1K16107•• 0.40 (0.180)
or 2 x 0.11 in. – 1 LC1K16017•• 0.40 (0.180)
Not for North American applications — not UL Listed or 4 (440)
3 7.5 16
CSA Certified 5.5 (440) 1 – LC1K16105•• 0.46 (0.210)
Solder pins for
1 – LC1K16103•• 0.40 (0.180)
Spring terminals
– 1 LC1K16013•• 0.40 (0.180)
▼ Use voltage codes on page 49 “Coil Selection” to complete catalog number.
▲ For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or LA4KE1UG (130 to 250 V), see page 52.
LC1K0610•• LC1K06107•• LC1K09103••
39
Sensitive-Environment Contactors for AC Control Circuits
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) of contactors for use in sensitive environments. They are recommended
for use in areas sensitive to noise, high interference mains supplies, and so forth. The contactors mount
on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position, and include a coil with a built-in rectifier and suppressor.
LC7K06105••
Max. Catalog
operational Weight lb.
1-Phase 3-Phase Inductive Type of connection Number
220 V 380 V 440/500 V current, (kg)
Current ▼
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V 440V up to:
120 V 240 V 208 V 240 V 480 V 600 V
1 – LC7K0610•• 0.50 (0.225)
Screw clamp
– 1 LC7K0601•• 0.50 (0.225)
Slip-on 1 x 0.25 in., 1 – LC7K06107•• 0.50 (0.225)
0.5 1 1.5 3 3 6 6 1.5 2.2 3 6
or 2 x 0.11 in. – 1 LC7K06017•• 0.50 (0.225)
1 – LC7K0910•• 0.50 (0.225)
Screw clamp
– 1 LC7K0901•• 0.50 (0.225)
Slip-on 1 x 0.25 in., 1 – LC7K09107•• 0.50 (0.225)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
or 2 x 0.11 in. – 1 LC7K09017•• 0.56 (0.255)
1 – LC7K1210•• 0.50 (0.225)
Screw clamp
– 1 LC7K1201•• 0.50 (0.225)
4 (> 440) Slip-on 1 x 0.25 in., 1 – LC7K12107•• 0.50 (0.225)
0.5 1.5 3 3 7.5 10 12 3 5.5 12
5.5 (440) or 2 x 0.11 in. – 1 LC7K12017•• 0.50 (0.225)
40
Three-Pole Contactors for DC Control Circuits
The table below shows the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for three-pole contactors for DC control circuits. The contactors mount on
35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position.
Horsepower Ratings for North American Applications Kilowatt Ratings for International
Applications Auxiliary
Contacts
Standard power ratings of Maximum Horsepower Ratings Maximum
3-phase motors 50/60 Hz Rated Catalog
1- phase 3- phase Inductive Type of Weight lb.
in category AC-3 operationa Number
50/60 HZ 50/60 HZ Current Connection (kg)
l current. ▼
in AC-3
220 V 380 V 440/500 V up to 440 V 115/ 230/ 200/
220/240 V 460/480 V 575/600 V Category
230 V 415 V 660/690 V 120 V 240 V 208 V
kW kW kW A HP HP HP HP HP HP A N/O N/C
1 – LP1K0610•• 0.50 (0.225)
Screw clamp
– 1 LP1K0601•• 0.50 (0.225)
Slip-on 1 x 0.25 in., 1 – LP1K06107•• 0.50 (0.225)
or 2 x 0.11 in. – 1 LP1K06017•• 0.50 (0.225)
1.5 2.2 3 6 0.5 1 1.5 1.5 3 3 6
Solder pins for 1 – LP1K06105•• 0.56 (0.255)
printed circuit board – 1 LP1K06015•• 0.56 (0.255)
1 – LP1K06103•• 0.50 (0.225)
Spring terminals
– 1 LP1K06013•• 0.50 (0.225)
1 – LP1K0910•• 0.50 (0.225)
Screw clamp
– 1 LP1K0901•• 0.50 (0.225)
Slip-on 1 x 0.25 in., 1 – LP1K09107•• 0.50 (0.225)
or 2 x 0.11 in. – 1 LP1K09017•• 0.50 (0.225)
2.2 4 4 9 0.5 1.5 2 3 5 5 9
Solder pins for 1 – LP1K09105•• 0.50 (0.225)
1 – LP1K09103•• 0.50 (0.225))
Spring terminals
– 1 LP1K09013•• 0.50 (0.225)
1 – LP1K1210•• 0.50 (0.225)
Screw clamp
– 1 LP1K1201•• 0.50 (0.225)
Slip-on 1 x 0.25 in., 1 – LP1K12107•• 0.50 (0.225)
or 2 x 0.11 in. – 1 LP1K12017•• 0.50 (0.225)
4 (>440 V)
3 5.5 12 0.5 1.5 3 3 7.5 10 12
5.5 (440 V) 1 – LP1K12105•• 0.56 (0.255)
Solder pins for
1 – LP1K12103•• 0.50 (0.225)
Spring terminals
– 1 LP1K12013•• 0.50 (0.225)
LP1K0610•• LP1K06107••
41
Selection of Contactors for Resistive Loads
Three- and Four-Pole Contactors for AC Control Circuits
The tables below show general-purpose and sensitive-environment three- and four-pole contactors for
AC control circuits. (The sensitive-environment contactors are recommended for use in areas sensitive
to noise, high interference mains supplies, and so forth.) The contactors mount on 35 mm DIN rails or
with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-tighten” position. In
addition, the sensitive-environment contactors include a coil with a built-in rectifier and suppressor.
General-purpose Contactors ◆
Power Auxiliary
Non-inductive loads Poles Contacts
Category AC-1 Catalog
Maximum current at ≤ Type of Connection Number Weight lb. (kg)
50 °C (122 °F) ▼
A N/O N/C N/O N/C

3 – 1 – LC1K0910•• 0.56 (0.255)
3 – – 1 LC1K0901•• 0.56 (0.255)
Screw clamp
4 – – – LC1K09004•• 0.40 (0.180)
2 2 – – LC1K09008•• 0.40 (0.180)
3 – 1 – LC1K09107•• 0.56 (0.255)
3 – – 1 LC1K09017•• 0.56 (0.255)
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
LC1K09004•• 4 – – – LC1K090047•• 0.40 (0.180)
2 2 – – LC1K090087•• 0.40 (0.180)
20
3 – 1 – LC1K09105•• 0.56 (0.255)
3 – – 1 LC1K09015•• 0.56 (0.255)
Solder pins for printed circuit board
4 – – – LC1K090045•• 0.46 (0.210)
2 2 – – LC1K090085•• 0.46 (0.210)
3 – 1 – LC1K09103•• 0.56 (0.255)
3 – – 1 LC1K09013•• 0.56 (0.255)
Spring terminals
4 – – – LC1K090043•• 0.46 (0.210)
2 2 – – LC1K090083•• 0.46 (0.210)
Sensitive-environment Contactors
3 – 1 – LC7K0910•• 0.56 (0.255)
3 – – 1 LC7K0901•• 0.56 (0.255)
Screw clamp
4 – – – LC7K09004•• 0.56 (0.255)
2 2 – – LC7K09008•• 0.56 (0.255)
3 – 1 – LC7K09107•• 0.56 (0.255)
3 – – 1 LC7K09017•• 0.56 (0.255)
20 Slip-on 1 x 0.25 in. or 2 x 0.11 in.
4 – – – LC7K090047•• 0.56 (0.255)
2 2 – – LC7K090087•• 0.56 (0.255)
3 – 1 – LC7K09105•• 0.56 (0.255)
3 – – 1 LC7K09015•• 0.56 (0.255)
Solder pins for printed circuit board
4 – – – LC7K090045•• 0.56 (0.255)
2 2 – – LC7K090085•• 0.56 (0.255)
LC7K090047•• LAFKE1UG (130 to 250 V), see page 52.
42
Selection of Contactors for Resistive Loads
Three- and Four-pole Contactors for DC Control Circuits
The table below shows three- and four-pole contactors for DC control circuits. The contactors mount on
35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the open, “ready-to-
tighten” position.
Power Auxiliary
Maximum current at Type of Connection Number Weight lb. (kg)
≤ 50 °C (122 °F) ▼
A N/O N/C N/O N/C

3 – 1 – LP1K0910•• 0.56 (0.225)
3 – – 1 LP1K0901•• 0.56 (0.225)
Screw clamp
4 – – – LP1K09004•• 0.56 (0.225)
2 2 – – LP1K09008•• 0.56 (0.225)
LP1K09004••
3 – 1 – LP1K09107•• 0.56 (0.225)
3 – – 1 LP1K09017•• 0.56 (0.225)
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
4 – – – LP1K090047•• 0.56 (0.225)
2 2 – – LP1K090087•• 0.56 (0.225)
20
3 – 1 – LP1K09105•• 0.56 (0.225)
Solder pins for printed circuit 3 – – 1 LP1K09015•• 0.56 (0.225)

board 4 – – – LP1K090045•• 0.56 (0.225)
2 2 – – LP1K090085•• 0.56 (0.225)
3 – 1 – LC1K09103•• 0.56 (0.225)
3 – – 1 LC1K09013•• 0.56 (0.225)
Spring terminals
4 – – – LC1K090043•• 0.46 (0.210)
2 2 – – LC1K090083••v 0.46 (0.210)
43
Selection of Reversing Contactors for Motor Control
Three-pole Reversing Contactors for AC Control Circuits
The table below shows three-pole reversing contactors with integrated mechanical interlock. The
contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are in the
open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to electrical
interlock; see page 56 (top row, center drawing).
For information on add-on auxiliary contact blocks and accessories, see page 50 to page 53.
Max. Catalog
Operational Weight
1-Phase 3-Phase Inductive Type of Connection Number
220 V 380 V 440/500 V Current, lb. (kg)
Current ▼■
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V up to 440 V
120 V 240 V 208 V 240 V 480 V 600 V
1 – LC2K0610•• 0.86 (0.390)
Screw clamp ▲
– 1 LC2K0601•• 0.86 (0.390)
Slip-on 1 x 0.25 in., or 1 – LC2K06107•• 0.81 (0.370)
2 x 0.11 in. – 1 LC2K06017•• 0.81 (0.370)
0.5 1 1.5 1.5 3 3 6 1.5 2.2 3 6
1 – LC2K06103•• 0.86 (0.390)
Spring terminals
– 1 LC2K06013•• 0.86 (0.390)
1 – LC2K0910•• 0.86 (0.390)
Screw clamp ▲
– 1 LC2K0901•• 0.86 (0.390)
Slip-on 1 x 0.25 in., 1 – LC2K09107•• 0.86 (0.390)
or 2 x 0.11 in. – 1 LC2K09017•• 0.86 (0.390)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
1 – LC2K09103•• 0.86 (0.390)
Spring terminals
– 1 LC2K09013•• 0.86 (0.390)
1 – LC2K1210•• 0.86 (0.390)
Screw clamp ▲
– 1 LC2K1201•• 0.86 (0.390)
Slip-on 1 x 0.25 in., 1 – LC2K12107•• 0.86 (0.390)
or 2 x 0.11 in. – 1 LC2K12017•• 0.86 (0.390)
4 (> 440)
0.5 1.5 3 3 7.5 10 12 3 5.5 12
5.5 (440) 1 – LC2K12105•• 0.95 (0.430)
Solder pins for
1 – LC2K12103•• 0.86 (0.390)
Spring terminals
– 1 LC2K12013•• 0.86 (0.390)
1 – LC2K1610•• 0.86 (0.390)
Screw clamp ▲
– 1 LC2K1601•• 0.86 (0.390)
Slip-on 1 x 0.25 in., 1 – LC2K16107•• 0.86 (0.390)
or 2 x 0.11 in. – 1 LC2K16017•• 0.86 (0.390)
Not for North American applications — not UL Listed or 4 (440)
3 7.5 16
CSA Certified 5.5 (440) 1 – LC2K16105•• 0.95 (0.430)
Solder pins for
1 – LC2K16103•• 0.86 (0.390)
Spring terminals
– 1 LC2K16013•• 0.86 (0.390)
■ For mains supplies with a high level of interference (voltage surge > 800 V), use a suppressor module LA4KE1FC (50 to 129 V) or LA4KE1UG (130 to 250 V), see page 52.
▲ Pre-wired power circuit connections are standard on screw clamp versions.
LC2K0610•• LC2K06107•• LC2K09103••
44
Sensitive-environment Reversing Contactors for AC Control Circuits
The tables below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for reversing contactors with mechanical interlock for use in sensitive
environments. They are recommended for use in areas sensitive to noise, high interference mains
supplies, and so forth. A coil with incorporated rectifier and suppressor is standard.
LC8K06105•• The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to
electrical interlock; see page 56 (top row, center drawing). For information on add-on auxiliary contact
blocks and accessories, see page 50 to 53.
Max. Catalog
Operational Weight
220 V 380 V 440/500 V Current, lb. (kg)
Current ▼
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V up to 440 V
120 V 240 V 208 V 240 V 480 V 600 V
1 – LC8K0610•• 1.05 (0.480)
Screw clamp ▲
– 1 LC8K0601•• 1.05 (0.480)
Slip-on 1 x 0.25 in., 1 – LC8K06107•• 1.00 (0.460)
0.5 1 1.5 3 3 6 6 1.5 2.2 3 6
or 2 x 0.11 in. – 1 LC8K06017•• 1.00 (0.460)
Solder pins for printed 1 – LC8K06105•• 1.14 (0.520)
circuit board – 1 LC8K06015•• 1.14 (0.520)
1 – LC8K0910•• 1.05 (0.480)
Screw clamp ▲
– 1 LC8K0901•• 1.05 (0.480)
Slip-on 1 x 0.25 in., 1 – LC8K09107•• 1.00 (0.460)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
or 2 x 0.11 in. – 1 LC8K09017•• 1.00 (0.460)
1 – LC8K1210•• 1.05 (0.480)
Screw clamp ▲
– 1 LC8K1201•• 1.05 (0.480)
4 (> 440) Slip-on 1 x 0.25 in., 1 – LC8K12107•• 1.00 (0.460)
0.5 1.5 3 3 7.5 10 12 3 5.5 12
5.5 (440) or 2 x 0.11 in. – 1 LC8K12017•• 1.00 (0.460)
45
Three-pole Reversing Contactors for DC Control Circuits
The table below show the kilowatt ratings (for international applications) and horsepower ratings (for
North American applications) for three-pole reversing contactors with integrated mechanical interlock for
DC control circuits. The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire
termination screws are in the open, “ready-to-tighten” position. Customer wiring is required to connect
coil terminations to electrical interlock; see page 56 (top row, center drawing).
Horsepower Ratings for North American Applications Kilowatt Ratings for International Applications
Auxiliary
Standard power ratings of 3-phase motors 50/ Rated
Maximum Horsepower ratings Contacts
Maximum 60 Hz in category AC-3 Operation
Inductive al Current Catalog
1- phase 3- phase Type of Weight
Current in AC-3 up Number
50/60 HZ 50/60 HZ 220 V 380 V 440/500 V Connection lb. (kg)
in AC-3 to 400 V ▼
115/ 230/ 200/ 220/ 460/ 575/ Category 230 V 415 V 660/690 V
120 V 240 V 208 V 240 V 480 V 600 V
1 – LP2K0610•• 1.05 (0.480)
Screw clamp ▲
– 1 LP2K0601•• 1.05 (0.480)
Slip-on 1 x 0.25 1 – LP2K06107•• 1.00 (0.460)

0.5 1 1.5 1.5 3 3 6 1.5 2.2 3 6 in. or 2 x 0.11 in. LP2K06017•• 1.00 (0.460)
Solder pins for – 1 LP2K06105•• 1.14 (0.520)
printed circuit
board 1 – LP2K06015•• 1.14 (0.520)
– 1 LP2K0910•• 1.05 (0.480)

Screw clamp ▲
1 – LP2K0901•• 1.05 (0.480)
Slip-on 1 x 0.25 – 1 LP2K09107•• 1.00 (0.460)

0.5 1.5 2 3 5 5 9 2.2 4 4 9 in. or 2 x 0.11 in. 1 – LP2K09017•• 1.00 (0.460)
printed circuit
board 1 – LP2K09015•• 1.14 (0.520)
– 1 LP2K1210•• 1.05 (0.480)

Screw clamp ▲
1 – LP2K1201•• 1.05 (0.480)
Slip-on 1 x 0.25 – 1 LP2K12107•• 1.00 (0.460)

4 (> 440)
0.5 1.5 3 3 7.5 10 12 3 5.5 12 in. or 2 x 0.11 in.
5.5 (440) 1 – LP2K12017•• 1.00 (0.460)
printed circuit
board 1 – LP2K12015•• 1.14 (0.520)

LP2K0610•• LP2K06107••
46
Selection of Reversing Contactors for Resistive Loads
Three- and Four-pole Reversing Contactors for AC Control Circuits
The tables below show general purpose and sensitive-environment three- and four-pole reversing
contactors for AC control circuits. The sensitive-environment contactors are recommended for use in
areas sensitive to noise, high interference mains supplies, and so forth. The contactors incorporate an
integrated mechanical interlock.
Both types of contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination
screws are in the open, “ready-to-tighten” position. In addition, the sensitive-environment contactors
include a coil with a built-in rectifier and suppressor. Customer wiring is required to connect coil
terminations to the electrical interlock; see page 56 (top row, center drawing).
General-purpose Contactors ◆
Power Auxiliary
Non-inductive Poles Contacts
loads Category
AC-1 Maximum Catalog
current at ≤ 50 °C Type of Connection Number Weight lb. (kg)
(122 °F) ▼
A N/O N/C N/O N/C

3 – 1 – LC2K0910•• ■ 0.86 (0.390)
Screw clamp ▲ 3 – – 1 LC2K0901•• ✤ 0.86 (0.390)
LC2K09004••
4 – – – LC2K09004•• 0.84 (0.380)
3 – – 1 LC2K09107•• 0.81 (0.370)
Slip-on 1 x 0.25 in. or 2 x 0.11 in. 3 – 1 – LC2K09017•• 0.81 (0.370)
4 – – – LC2K090047•• 0.81 (0.370)
20
3 – 1 1 LC2K09105•• 0.95 (0.430)
Solder pins for circuit board 3 – – – LC2K09015•• 0.95 (0.430)
4 – – – LC2K090045•• 0.95 (0.430)
3 – 1 1 LC2K09103•• 0.86 (0.390)
Spring terminals 3 – – – LC2K09013•• 0.86 (0.390)
4 – – – LC2K090043•• 0.86 (0.390)
Sensitive-Environment Contactors
3 – 1 – LC8K0910•• f 1.05 (0.480)
Screw clamp ▲ 3 – – 1 LC8K0901•• f 1.05 (0.480)
4 – – – LC8K09004•• 1.03 (0.470)
3 – – 1 LC8K09107•• 1.01 (0.460)
20 Slip-on 1 x 0.25 in. or 2 x 0.11 in. 3 – 1 – LC8K09017•• 1.01 (0.460)
4 – – – LC8K090047•• 1.01 (0.460)
3 – 1 1 LC8K09105•• 1.14 (0.520)
Solder pins for circuit board 3 – – – LC8K09015•• 1.14 (0.520)
LC8K09105•• 4 – – – LC8K090045•• 1.14 (0.520)
LAFKE1UG (130 to 250 V), see page 52.
■ WARNING: This reversing contactor is pre-wired for reverse motor operation as standard.
47
Selection of Reversing Contactors for Resistive Loads
Three- and Four-pole Reversing Contactors for DC Control Circuits
The table below shows general-purpose three- and four-pole reversing contactors for DC control
circuits. The contactors incorporate an integrated mechanical interlock.
The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
in the open, “ready-to-tighten” position. Customer wiring is required to connect coil terminations to the
electrical interlock; see page 56 (top row, center drawing).
Power Auxiliary
Maximum current at Type of Connection Number Weight lb. (kg)
≤ 50 °C (122 °F) ▼
A N/O N/C N/O N/C

3 – 1 – LP2K0910•• ■ 1.05 (0.480)
LC2K09004••
Screw clamp ▲ 3 – – 1 LP2K0901•• ■ 1.05 (0.480)
4 – – – LP2K09004•• 1.05 (0.480)
3 – – 1 LP2K09107•• 1.01 (0.460)
20 Slip-on 1 x 0.25 in. or 2 x 0.11 in. 3 – 1 – LP2K09017•• 1.01 (0.460)
4 – – – LP2K090047•• 1.01 (0.460)
3 – 1 1 LP2K09105•• 1.14 (0.520)
Solder pins for circuit board 3 – – – LP2K09015•• 1.14 (0.520)
4 – – – LP2K090045•• 1.14 (0.520)
■ WARNING: This reversing contactor is pre-wired for reverse motor operation as standard.
48
K-line Mini-contactors, D-line Contactors, and Enclosed Starters
Coil Selection
NOTE: Voltage codes in bold face are typical control voltages..
Contactors LC1K, LC2K (0.8 to 1.15 Vc)
Volts AC 200/ 220/ 230/ 380/ 400/ 660/
12 20 24 ▲ 36 42 48 110 120 127 230 256 277 400 440 480 500 575 600
50/60 Hz 208 230 ◆ 240 ◆ 400 ◆ 415 ◆ 690 ◆
Voltage
J7 Z7 B7 C7 D7 E7 F7 G7 FC7 L7 M7 P7 U7 W7 UE7 Q7 V7 N7 R7 T7 S7 SC7 X7 Y7
Code
Up to and including 240 V, coil with integral suppression device available: add 2 to the code required. Example: J72.
▲ When connecting an electronic sensor or timer in series with the coil of the control relay, select a 20 V coil (AC control circuit voltage code Z7,
DC control circuit voltage code ZD) so as to compensate for the incurred voltage drop.
◆ 0.85 to 1.1 Vc.
Contactors LC7K, LC8K (0.85 to 1.1 Vc)

230/
Volts AC 50/60 Hz 24 42 48 110 120 220
240
Voltage Code B7 D7 E7 F7 G7 M7 U7
Contactors LP1K, LP2K (0.8 to 1.15 Vc)

Volts DC 12 20 24 q 36 48 60 72 100 110 125 155 174 200 220 230 240 250
Voltage Code JD ZD BD CD ED ND SD KD FD GD PD QD LD MD MPD MUD UD
Coil with integral suppression device available: add 3 to the code required. Example: JD3.
▲ When connecting an electronic sensor or timer in series with the coil of the control relay, select a 20 V coil (AC control circuit voltage code Z7,
DC control circuit voltage code ZD) so as to compensate for the incurred voltage drop.
LC1D, LC2D AC/DC Supply (3 Pole)

AC Coils
LC1D09 . . . D38
24 V 42 V 48 V 110 V 115 V 120 V 127 V 208 V 220 V 230 V 240 V 277 V 380 V 400 V 415 V 440 V 480 V 500 V 575 V 600 V 660 V
50/60 Hz B7 D7 E7 F7 FE7 G7 FC7 LE7 M7 P7 U7 W7 Q7 V7 N7 R7 T7 – SC7 X7 –
LC1D12 & D25, 4 Pole
50/60 Hz B7 D7 E7 F7 FE7 G7 – LE7 M7 P7 U7 – Q7 V7 N7 R7 – – SC7 – –
50 Hz B5 D5 E5 F5 FE5 – G5 – M5 P5 U5 – Q5 V5 N5 R5 – S5 – – Y5
60 Hz B6 – E6 F6 – G6 – L6 M6 – U6 W6 Q6 – N6 a R6 T6 – S6 X6 –
a N6 voltage code not availabel for LC1D25 4-pole contactor.
LC1D40 . . . D95, 3 or 4-Pole
50/60 Hz B7 D7 E7 F7 FE7 G7 – – M7 P7 U7 – Q7 V7 N7 R7 – – – – –
50 Hz B5 D5 E5 F5 FE5 – G5 – M5 P5 U5 – Q5 V5 N5 R5 – S5 – – Y5
60 Hz B6 – E6 F6 – G6 – L6 – – U6 W6 – – – R6 T6 – S6 X6 –
LC1D115 & D150 Coils with integral suppression device fitted as standard
50/60 Hz B7 D7 E7 F7 FE7 G7 FC7 LE7 M7 P7 U7 UE7 Q7 V7 N7 R7 T7 S7 – – –
50 Hz B5 D5 E5 F5 FE5 – FC5 – M5 P5 U5 – Q5 V5 N5 R5 – S5 – – –
60 Hz B6 – E6 F6 – G6 – L6 M6 – U6 W6 Q6 – – R6 T6 – – – –
DC Coils
LC1D09 . . .D38 Coils with integral suppression device fitted as standard
5V 12 V 20 V 24 V 36 V 48 V 60 V 72 V 96 V 110 V 125 V 220 V 250 V 440 V – – – – – – –
U 0.7 . . . 1.25 Uc – JD – BD CD ED ND SD – FD GD MD UD RD – – – – – – –
LC1D09 . . . D38 LOW CONSUMPTION Coils with integral suppression device fitted as standard
U 0.7 . . . 1.25 Uc AL JL ZL BL CD EL – SL DL FL – ML UL – – – – – – – –
LC1D40 . . . D95
U 0.85 . . . 1.1 Uc (standard) – JD – BD CD ED ND SD – FD GD MD UD RD – – – – – – –
U 0.75 . . . 1.2 Uc (wide range) – JW – BW CW EW – SW – FW – MW – – – – – – – – –
LC1D115 & D150 Coils with integral suppression device fitted as standard
U 0.75 . . . 1.2 Uc – – – BD – ED ND SD – FD GD MD UD RD – – – – – – –
49
12/01
Selection of Auxiliary Contacts and Timers
XX
LC1/LC7/LP1K
LA1KN● ● ●
LA1KN● ●M
LC1/LC7/LP1K
LA1KN● ●
LA1KT2●
LC1/LC7/LP1K
LA1 KN● ●P
50
Selection of Auxiliary Contacts and Timers
Instantaneous Auxiliary Contact Blocks for Type LC•K and LP•K Contactors
Recommended for standard applications. Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Type of Connection Type of Contactor Catalog Number Weight lb. (kg)
N/O N/C
2 – LA1KN20 0.10 (0.045)
– 2 LA1KN02 0.10 (0.045)
1 1 LA1KN11 0.10 (0.045)
LC1, LC2
LC7, LC8 4 – LA1KN40 0.10 (0.045)
Screw Clamp
LP1, LP2 3 1 LA1KN31 0.10 (0.045)
3- or 4-pole
2 2 LA1KN22 0.10 (0.045)
1 3 LA1KN13 0.10 (0.045)
– 4 LA1KN04 0.10 (0.045)
2 – LA1KN207 0.10 (0.045)
– 2 LA1KN027 0.10 (0.045)
1 1 LA1KN117 0.10 (0.045)
LC1, LC2
LC7, LC8 4 – LA1KN407 0.10 (0.045)
Slip-on 1 x 0.25 in. or 2 x 0.11 in.
LP1, LP2 3 1 LA1KN317 0.10 (0.045)
3- or 4-pole
2 2 LA1KN227 0.10 (0.045)
1 3 LA1KN137 0.10 (0.045)
– 4 LA1KN047 0.10 (0.045)
2 – LA1KN203 0.10 (0.045)
– 2 LA1KN023 0.10 (0.045)
1 1 LA1KN113 0.10 (0.045)
LC1, LC2 4 – LA1KN403 0.10 (0.045)
Spring Terminals LP1, LP2
3- or 4-pole 3 1 LA1KN313 0.10 (0.045)
2 2 LA1KN223 0.10 (0.045)
1 3 LA1KN133 0.10 (0.045)
– 4 LA1KN043 0.10 (0.045)
With terminal referencing conforming to standard EN 50012. Clip-on front mounting, 1 block per contactor
– 2 LA1KN02M 0.10 (0.045)
LC1, LC2 1 1 LA1KN11M 0.10 (0.045)
LC7, LC8
3 1 LA1KN31M 0.10 (0.045)
LP1, LP2
Screw clamp with terminal referencing conforming to 3-pole + N/O 2 2 LA1KN22M 0.10 (0.045)
standard EN 50012 1 3 LA1KN13M 0.10 (0.045)
LC1, LC2 1 1 LA1KN11P 0.10 (0.045)
LC7, LC8
LP1, LP2 2 2 LA1KN22P 0.10 (0.045)
4-pole
Electronic Time-Delay Auxiliary Contact Blocks for Type LC•K and LP•K Contactors
– Relay output, with common point changeover contact, AC or DC 240 Vac, 2 A maximum.
– Control voltage: 0.85 to 1.1 Vc.
– Maximum switching capacity: 250 VA or 150 W.
– Operating temperature: -10 to + 60 °C (14 to 140 °F).
– Reset time: 1.5 s during the time delay period, 0.5 s after the time delay period.
Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Voltage Timing
Type Range Catalog Number Weight lb. (kg)
s
V SPDT
AC or DC 24 to 48 On-delay 1 to 30 1 LA2KT2E 0.09 (0.040)
AC 110 to 240 On-delay 1 to 30 1 LA2KT2U 0.09 (0.040)
51
Selection of Accessories
Coil Suppressor Modules With an LED Indicator for Type LC•K and LP•K Contactors
Mounting and connection Type For voltages: Sold in lots of Catalog Number Weight lb. (kg)
AC and DC
5 LA4KE1B 0.02 (0.010)
12 to 24 V
AC and DC
5 LA4KE1E 0.02 (0.010)
32 to 48 V
Varistor ■
AC and DC
5 LA4KE1FC 0.02 (0.010)
50 to 129 V
Clip-on mounting on the front of
AC and DC
LC1 and LP1 contactors. 5 LA4KE1UG 0.02 (0.010)
201 to 250 V
No tools required.
DC
5 LA4KC1B 0.02 (0.010)
Diode + 12 to 24 V
Zener diode ◆ DC
5 LA4KC1E 0.02 (0.010)
32 to 48 V
LA4K•• AC
RC ▲ 5 LA4KA1U 0.02 (0.010)
220 to 250 V
■ Protection by limitation of the transient voltage up to 2 Vc maximum. Maximum reduction of transient voltage peaks.
Slight time delay on drop-out (1.1 to 1.5 times the normal time).
◆ No overvoltage or oscillation frequency. Polarized component. Slight time delay on drop-out (1.1 to 1.5 times the normal time).
▲ Protection by limitation of the transient voltage up to 3 Vc maximum and limitation of the oscillation frequency.
Slight time delay on drop-out (1.2 to 2 times the normal time).
Mounting and Marking Accessories

Description Application Sold in lots of Unit Catalog Number Weight lb. (kg)
For mounting on 1 ’ rail Clip-on 1 LA9D973 0.05 (0.025)
Mounting plates ■ 110/120 mm mounting
For mounting on 2 ’ rails 10 DX1AP25 0.14 (0.065)
centers
Marker holder Clip-on Onto front of contactor 100 LA9D90 0.002 (0.001)
Strips of 10 identical
25 AB1R• ▲ 0.004 (0.002)
4 maximum numbers 0 to 9
Clip-in markers
per contactor Strips of 10 identical
25 AB1G• ▲ 0.004 (0.002)
capital letters A to Z
35mm " DIN rail (7.5mm deep x 2m long) 10 AM1DP200 2.88 (1.310)
35mm " DIN rail (15mm deep x 2m long) 10 AM1ED200 1.44 (0.650)
■ Order 1 mounting plate for a contactor and 2 mounting plates for a reversing contactor.
▲ Complete the catalog number by replacing the • with the required character.
DX1AP25 Cabling Accessories

Sold in Unit Catalog
Description Application Weight kg (lb.)
lots of Number
For 2-poles With screw clamp terminals 4 LA9E01 0.02 (0.010)
Paralleling links
For 4-poles With screw clamp terminals 2 LA9E02 0.03 (0.015)
For 3-pole reversing For contactors with screw
Set of 6 power connections 100 LA9K0969 0.02 (0.010)
contactors for motor control clamp terminals
For 4-pole changeover For contactors with screw
contactor pairs clamp terminals
LA9E01
52
Dimensions and Mounting of Type LC•K and LP•K Contactors
XXX
Contactors
LC1K, LC7K, LP1K
On panel On mounting rail AM1DP200 or AM1DE200 1.4 in. (35 mm) DIN rail
LA1 K 0.16 (#6) screws

4mm
2.28
58
2.28
1.97
50
58
2.24 1.78
57 45
1.22 2.24 = =
=
1.38
31 57 35
1.78
45
On one asymmetrical rail DZ5MB with clip-on mounting plate

LA9D973 DX1AP25
0.20
DZ5 ME5
5
1.97
50
4.72
120
4.33
110
0.83 = =
0.20
2.24 1.38
5
57 21 35
1.78
45
2.24 1.06 1.78

On printed circuit board 57 27 45
0.34 == = A1
8.65
2.28
1.97
2.09
58
50
53
10xØ 0.05 1.78 A2

1.3 45
Electronic time-delay auxiliary contact blocks

LA2KT On contactor
LA2 KT
2.28
1.06
58
27
1.34 1.50
34 38 1.34 2.24
34 57
Suppressor modules
LA4K• On contactor
2.26
0.99
58
25
0.87 0.24
22 6 0.87 2.24 Dimensions Inches
22 57 mm
53
Dimensions and Mounting of Type LC•K and LP•K Reversing Contactors
Reversing contactors LC2K, LC8K, LP2K

On panel On mounting rail AM1DP200 or AM1DE200 1.4 (35 mm) DIN rail
LA1K 0.16 (#6) screws

4 mm
2.28
58
2.28
1.97
58
50
2.24 3.54
57 90
1.22 2.24 = 3.15 =
=
31 57 80
3.54
90
On one asymmetrical rail DZ5MB with 2 clip-on mounting plates LA9D973 or on 2 mounting plates DX1AP25.
2 x LA9D973 2 x DX1AP25
0.20
1.78
5
45
DZ5 ME5
1.97
50
4.33
110
4.72
120
2.24 0.83 = 1.38 =
0.20
5
57 21 35
3.54
90
2.24 1.06 3.54
On printed circuit board for reversing contactors or 2 contactors mounted side by side 57 27 90
0.34 == = = == 0.34
8.65 8.65
A1 A1
1.97
2.09
2.28
50
53
58
A2 A2
20xØ1.3 1.78 1.78

0.05 45 45
Electronic time delay auxiliary contact blocks

LA2KT On reversing contactors
LA2 KT
2.28
1.06
58
27
1.34 1.50
34 38 1.34 2.24
34 57
Suppressor modules
LA4K• On reversing contactors
2.28
0.99
58
25
0.87 0.24
22 6 0.87 2.24 Dimensions inches
22 57 mm
54
Schematics
Type LC•K and LP•K Contactors and Accessories
3-pole contactors Integrated-coil suppression device
LC1K, LC7K, LP1K LC7K
3-pole + N/O 3-pole + N/C
A1
3/L2
5/L3
1/L1
13/NO
3/L2
5/L3
1/L1
21/NC
A1
A1
A2
14
A2
22
T3/6
T1/2
T2/4
T3/6
T1/2
T2/4
A2
A1
4-pole 2-pole N/O + 2-pole N/C
3/L2
5/L3
7/L4
1/L1
R1
R3
1
3
A1
A1
A2
A2
T3/6
T4/8
T1/2
T2/4
4
R2
R4
2
A2
Instantaneous auxiliary contacts LA1K
For contactors LC•K and LP•K
2 N/O 2 N/C 1 N/O + 1 N/C
LA1KN20 LA1KN02 LA1KN11
53/NO
61/NC
53/NO
63/NO
51/NC
61/NC
62
54
54
64
52
62
4 N/O 3 N/O + 1 N/C 2 N/O + 2 N/C 1 N/O + 3 N/C 4 N/C

LA1KN40 LA1KN31 LA1KN22 LA1KN13 LA1KN04
53/NO
63/NO
73/NO
83/NO
51/NC
61/NC
71/NC
81/NC
53/NO
53/NO
73/NO
83/NO
61/NC
71/NC
81/NC
61/NC
53/NO
83/NO
61/NC
71/NC
52
62
72
82
54
62
72
82
54
62
74
84
54
62
72
84
54
64
74
84
Terminal referencing conforming to standard EN 50012

For 3-pole contactors
2 N/C 1 N/O + 1 N/C 3 N/O + 1 N/C 2 N/O + 2 N/C 1 N/O + 3 N/C
LA1KN02M LA1KN11M LA1KN31M LA1KN22M LA1KN13M
21/NC
31/NC
43/NO
53/NO
53/NO
21/NC
31/NC
21/NC
31/NC
41/NC
33/NO
21/NC
33/NO
43/NO
53/NO
21/NC
22
32
22
32
44
54
22
32
42
54
22
34
22
34
44
54
For 4-pole contactors

1 N/O + 1 N/C 2 N/O + 2 N/C
LA1KN11P LA1KN22P
13/NO
21/NC
13/NO
43/NO
21/NC
31/NC
22
14
14
22
32
44
Electronic time delay auxiliary contact blocks

LA2KT
For contactors LC•K and LP•K Suppressor modules
1 C/O LA4KC LA4KE
A1
16
18
15
A2
DC AC/ DC
+ −
55
Schematics
Type LC•K and LP•K Reversing Contactors and Accessories
3-pole reversing contactors Dashed lines indicate suggested Integrated-coil suppression device
LC2K, LC8K, LP2K customer wiring to electrically LC8K
With screw clamp terminals interlock coils
3 P + N/O 3 P + N/C
A1
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
13/NO
13/NO
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
A1
A1
21/NC
21/NC
A1
A1
A2
A2
A2
14
14
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
A2
A2
22
22
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
With Slip-on connectors or solder pins (printed circuit board) With Slip-on connectors or solder pins (printed circuit board)
3 P+ N/O 3 P + N/C
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
21/NC
21/NC
13/NO
13/NO
A1
A1
A1
A1
A2
A2
22
22
A2
A2
14
14
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
4-pole reversing contactors Integrated-coil suppression device

With screw clamp terminals With Slip-on connectors or solder pins (printed circuit board)
4P 4P
A1
1/L1
1/L2
1/L3
1N
2/L1
2/L2
2/L3
2N
7
3
7
1
1
A1
A1
A2
A2
5
7
3
5
1
1
A1
A1
8
2
4
A2
A2
6
8
2
A2
L1
L2
L3
Instantaneous auxiliary contact blocks LA1K

For contactors LC•K and LP2K
2 N/O 2 N/C 1 N/O + 1 N/C Terminal referencing conforming to standard EN 50012
LA1KN20 LA1KN02 LA1KN11 1 N/O + 1 N/C
LA1KN207 LA1KN027 LA1KN117 LA1KN11P
53/NO
63/NO
51/NC
61/NC
53/NO
13/NO
61/NC
21/NC
52
62
54
64
62
54
14
22
For contactors LC•K, LP2K

4 N/O 3 N/O + 1 N/C 2 N/O + 2 N/C 1 N/O + 3 N/C 4 N/C
53/NO
73/NO
83/NO
61/NC
53/NO
61/NC
71/NC
81/NC
53/NO
83/NO
51/NC
61/NC
71/NC
81/NC
53/NO
63/NO
73/NO
83/NO
61/NC
71/NC
54
62
74
84
54
62
72
82
52
62
72
82
54
62
72
84
54
64
74
84
For auxiliary contacts with terminal referencing conforming to standard EN 50012 see page 51.
Electronic time delay contact blocks Suppressor modules
LA2KT LA4KC LA4KE
For contactors LC•K and LP•K
1 C/O
A1
16
18
15
A2
DC AC/ DC
+ −
56
Characteristics of Type LR•K Overload Relays
Environment
Meets the essential
Conforming to standards requirements of the IEC 60947, NF C 63-650, VDE 0660, BS 4941, UL 508, CSA 22.2 No. 14
LV & EMC directives
Product certifications LR43364

E164353
3211 03
NKCR
Protective treatment Conforming to IEC 60068 (DIN 50016) “TC” (Fungus-proof, tropicalization protection)
Storage -40° to +70° C (-40 to +158° F)
Ambient air temperature
For normal operation (IEC 60947) -20 to +55° C (-4 to +131° F) without derating
around the device
Operating limit -30 to +60° C (-22 to +140° F) with derating ■
Maximum operating altitude Without derating 2000 m (6562 ft.)
90°
Operating positions
90° 90° 90°

Without derating With derating ■
Conforming to UL 94 Self-extinguishing material V1
Flame resistance
Shock resistance, hot state Conforming to IEC 60068, N/C contact 10 gn

(1/2 sine wave, 11 ms) Conforming to IEC 60068, N/O contact 10 gn
Vibration resistance, hot state Conforming to IEC 60068, N/C contact 2 gn

5 to 300 Hz Conforming to IEC 60068, N/O contact 2 gn
Safe separation of circuits Conforming to VDE 0106 and IEC 60536 SELV, up to 400 V ▲
Cabling Minimum Maximum Maximum to IEC 60947
Solid or stranded cable AWG 1 x 18 2 x 14 or 1 x 12 –
Solid cable mm2 1 x 1.5 2x4 1 x 4 + 1 x 2.5
Screw clamp terminals
Stranded cable without cable end mm2 1 x 0.75 2x4 2 x 2.5
Tightening torque Phillips no. 2 or 3/16” slotted head 0.8 N.m (7 lb.-in.)
Mounting Directly under the contactor or reversing contactor
Made automatically when mounted under the contactor, as follows:
- contactor terminal A2 connected to overload relay terminal 96 on all products,
Connections - contactor terminal 14 connected to overload relay terminal 95 on products with 3 P + N/O
When using 3 P + N/C, or 4 P contactors, or the N/O auxiliary contact marked 13-14, at a voltage other than the coil
voltage, break off the link marked 14. (See page 60 for additional information.)
■ Please consult your Local Field Sales Office.
▲ Safe extra low voltage.
Auxiliary Contact Characteristics

Number of contacts 1 N/C + 1 N/O
Conventional thermal current A 6
Conforming to IEC 60947, VDE
Short-circuit protection 0660. gl fuse or supplementary A 6 max.
protector GB2CB••
220/ 415/ 600/
V 24 48 110 400
AC 230 440 690
Maximum power of the controlled
contactor coils (sealed) (Occasional VA 100 200 400 600 600 600 600
operating cycles of contact 95-96) V 24 48 110 220 250 – –
DC
W 100 100 50 45 35 – –
AC, category AC-15 V 690
Maximum operational voltage
DC, category DC-13 V 250
57
Characteristics of Type LR•K Overload Relays
Electrical Characteristics of the Power Circuit

Rated operational voltage (Ve) Up to V 690
Conforming to BS 4941 V 690
Conforming to VDE 0110 group C V 750
Conforming to UL 508, CSA 22.2 No. 14 V 600
6
Rated impulse withstand voltage (Vimp) kV
Up to 400
Frequency limits of the operational current Hz
Power dissipated per pole W 2

Short-circuit protection and coordination
By fuses Maximum 400% of motor FLA
Operating Characteristics
Sensitivity to phase failure Conforming to IEC 60947 Yes
Selected by means of a lockable and sealable switch
Manual or automatic
Reset on the front of the relay
Signalling On front of relay Trip indicator

Pressing the Reset-Stop button:
Reset-Stop function – Actuates the N/C contact
– Has no effect on the N/O contact
Pressing the Test button enables:
– Checking of the control circuit wiring
Test function By pushbutton
– Simulation of overload tripping (actuation of both
N/C and N/O contacts, and of the trip indicator)
Tripping curves
Average operating time Time Class 10 A Time Class 10 A

related to multiples of the
current setting Class 10 A 2h 2h
1h 20 min 1h 20 min
1h 1h
40 min 40 min
20 min 20 min
10 min 10 min
6 min 6 min
4 min 4 min
2 min 2 min
1 min 1 min
40 s 40 s
20 s 20 s
10 s 10 s
6s 6s
4s 4s
1
2s 2s 2
1s 1s
1 1.2 1.5 2 3 4 5 6 8 10 15 1 1.2 1.5 2 3 4 5 6 8 10 15
x setting current (Ir) x setting current (Ir)
Balanced 3-phase operation, from cold state. Balanced operation with 2-phases only, from cold state.
1 = Setting: at lower end of scale.
2 = Setting: at upper end of scale.
58
Selection of Type LR•K Overload Relays
These overload relays are designed for the protection of motors. They are ambient-compensated and
phase-failure sensitive. They may be reset either manually or automatically.
For direct mounting, the relays are placed under the contactors with screw clamp terminals only
(pre-wired terminals; see page 60). For separate mounting, use terminal block LA7K0064 (see below).
The front face of the overload relay provides:
• Selection of reset mode: Manual (marked H) or Automatic (marked A).
• A red pushbutton for the Trip Test function.
• A blue pushbutton for Stop and manual reset.
• A yellow trip flag to indicate that the overload relay tripped.
Three-pole Relays with Screw Clamp Terminals

Short-circuit protection for By circuit breaker Select in accordance with NEC and local codes
North American applications By fuses Maximum 400% of motor FLA
European type fuses
Relay Setting Maximum rating
Range Type Catalog Number Weight lb. (kg)
aM gl BS88
A A A A
Class 10 A (the standard specifies a tripping time of between 2 and 10 seconds at 7.2 In)
0.11 to 0.16 0.25 0.5 – LR2K0301 0.32 (0.145)
LR2K0301 0.16 to 0.23 0.25 0.5 – LR2K0302 0.32 (0.145)

0.23 to 0.36 0.5 1 – LR2K0303 0.32 (0.145)
0.36 to 0.54 1 1.6 – LR2K0304 0.32 (0.145)
0.54 to 0.8 1 2 – LR2K0305 0.32 (0.145)
0.8 to 1.2 2 4 6 LR2K0306 0.32 (0.145)
1.2 to 1.8 2 6 6 LR2K0307 0.32 (0.145)
1.8 to 2.6 4 8 10 LR2K0308 0.32 (0.145)
2.6 to 3.7 4 10 16 LR2K0310 0.32 (0.145)
3.7 to 5.5 6 16 16 LR2K0312 0.32 (0.145)
5.5 to 8 8 20 20 LR2K0314 0.32 (0.145)
8 to 11.5 10 25 20 LR2K0316 0.32 (0.145)
10 to 14 16 32 25 LR2K0321 ◆ 0.32 (0.145)
12 to 16 20 40 32 LR2K0322 ◆ 0.32 (0.145)
◆ Not UL Listed or CSA Certified.
Overload Relays without Single-phase Sensitivity ◆

Class 10 A: To order, replace the prefix LR2 by LR7 in the catalog numbers selected from above (only applicable to overload relays LR2K0305
to LR2K0322). Example: LR7K0308.
◆ Not UL Listed or CSA Certified.
Accessory
Description Type of Connection Catalog Number Weight lb. (kg)
Terminal block for separate clip-on mounting
Screw clamp LA7K0064 0.22 (0.100)
of the overload relay on 35 mm " DIN rail
LA7K0064
59
Dimensions, Mounting, and Schematics for Type LR•K Overload Relays
Protection components
LR2K Separate mounting with terminal block LA7K0064 on 1.4 in. (35 mm) DIN rail
Direct mounting beneath the contactor (AM1DP200 or AM1DE200)
0.31 = 1.38 =
8 35
1.50
38
0.16
3.15
1.97
80
4mm
50
(#6) screws
4.57
116
=
2.95 1.77
2.28
75 45
58
c
AM1- c
2.56 1.77
65 45 DP200 3.09 in. / 78.5mm
DE200 3.38 in. / 86mm
LR2K LR2K + LC•K

Built-in wiring schematic
A1
A
13
13
1
5
H
– KM1
14
1
95
95
97
95
2
14
A2
Internal
O
96
98
Links
96
2
96
A2
– KM1
A1
97 95 98 96
Reset/stop
6
2
LR2K Overload Relays feature built-in wiring to save time and materials
when all five links of the overload relay are connected to a K-line
contactor with an integrated N/O (normally-open) auxiliary contact.
Terminal 96 of the N/C (normally-closed) overload relay contact (95-96)
will be internally linked in series with terminal A2 of the contactor
operating coil. Terminal 95 of the N/C overload relay contact (95-96) will
be internally linked in series with terminal 14 of N/O coil holding contact
(13-14) of the contactor. These internal links help to eliminate additional
wiring when using a conventional 3-wire control circuit similar to the
diagram shown.
L1 L2
Start
Stop
95 96 A2 A1
13 14 Internal
Links
If integrated wiring between contactor and

overload relay is not desired, break off the
two links on the overload relay as indicated.
60
Characteristics of Type LP•K Low-consumption Contactors
Environment
Conforming to VDE 0110 gr C V 750
Conforming to BS 5424, NF C 20-040 V 690
Conforming to CSA 22.2 No. 14, UL 508 V 600
Rated impulse withstand
kV 8
voltage (Vimp)
Meets the essential
IEC 60947, NF C 63-110, VDE 0660, BS 5424, UL 508, CSA 22.2 No.
Conforming to standards requirements of the LV &
14
EMC directives
E164862 E164862
NLDX LR43364 NLDX2
Approvals LP•K06, LP•K09, LP•K12
(screw clamp) 3211 04 (Slip-on &
solder pin)
Protective treatment Conforming to IEC 60068 (DIN 50016) “TC” (Fungus-proof, Tropicalization protection)
Ambient air temperature Storage - 50 to + 80° C (-58 to +176°F)

around the device Operation - 25 to + 50C (-13 to +122°F)
Maximum operating altitude Without derating 2000 m (6562 ft)
°
90
90
90
°
°
18 0 °
Operating positions
°
90
Derate current carrying capability by 15%
Without derating Without derating when not mounted vertically
Conforming to UL 94 Self-extinguishing materials V1
Flame resistance
Shock resistance Contactor open 10 g

(1/2 sine wave, 11 ms) Contactor closed 15 g
Vibration resistance Contactor open 2g

5 to 300 Hz Contactor closed 4g
Conforming to VDE 0106 and IEC
Safe separation of circuits SELV, up to 400 V ▲
60536
Cabling Min Max Max to IEC 60947
Solid or stranded cable AWG 1 x 18 2 x 14 or 1 x 12 -
Screw clamp Solid cable mm2 1 x 1.5 2x4 1 x 4 + 1 x 2.5

terminals Stranded cable without cable end mm2 1 x 0.75 2x4 2 x 2.5
Slip-on connectors Clip 2 x 2.8mm or 1 x 6.35mm (2 x 0.110 in. or 1 x 0.250 in.)
Solder pins for With locating device between power
4 mm x 35 microns
printed circuit board and control circuits
Phillips no. 2 or 3/16" slotted head
Tightening torque 0.8 to 1.3 N•m (7 to 11.5 lb.-in)
screwdriver
Conforming to standards EN 50005 and
Terminal referencing Up to 3 contacts
EN 50012
▲ Safe extra low voltage.
61
Pole Characteristics
Conventional rated thermal current For ambient temperature
A 20
(Ith) ≤ 50 °C (122°F)
Rated operational frequency Hz 50/60
Frequency limits of the operational
Hz Up to 400
current
Rated operational voltage (Ve) V 690
I rms conforming to NF C 63-110
A
and IEC 60947
Rated making capacity
LP•K06, LP•K09 110
LP•K12 144
Conforming to NF C 63-110 and 220/ 380/ 660/
V 415 440 500
IEC 60947 230 400 690
Rated breaking capacity
LP•K06, LP•K09 110 110 110 110 80 70
I rms A
LP•K12 – – – 120 80 70
Open mounted, for a time “t” from
1s 5s 10 s 30 s 1 min 3 min ≥15 min
cold state (θ ≤ 50 °C [122 °F])
Permissible short time rating
LP•K06, LP•K09 90 85 80 60 45 40 20
A
LP•K12 115 105 100 75 55 50 25
Short-circuit protection
By fuses Max 400% of motor FLA
Average impedance per pole At Ith and 50 Hz mΩ 3
Maximum rated
operational current for a A 20
On-load factor 90% 60% 30%
Rated operational current limits 300 op. cycles/hour 13 15 18
in relation to on-load factor and A
operating frequency 120 op. cycles/hour 15 18 19
Utilization in category AC-1
resistive circuits, heating, lighting 30 op. cycles/hour 19 20 20
(Ve ≤ 440 V)
Apply the following coefficients to the current values given above.
These take into account the often unbalanced current distribution
between poles
Increase in operational current
by paralleling poles 2 poles in parallel: K = 1.60
Operational power 220/ 380/ 440/ 500/ 660/

Voltage 115 220
according to the V 240 415 480 600 690
50 or 60Hz
voltage 1-ph 1-ph 3-ph 3-ph 3-ph 3-ph 3-ph
Motor
LP•K06 kW 0.37 0.75 1.5 2.2 3 3 3
ratings
Utilization in category AC-3 Motor
Squirrel cage motors LP•K09 kW 0.55 1.1 2.2 4 4 4 4
ratings
Motor 5.5
LP•K12 kW – – 3 5.5 4 4
ratings 4 (480)
Percent utilization of operational Op. cycles/h 600 900 1200
power in relation to the maximum
operating rate Puissance 100% 75% 50%
Operational power Voltage 220/ 220/ 460/ 575/

115 220
according to the 50 or V 208 240 480 600
voltage 60Hz 1-ph 1-ph 3-ph 3-ph 3-ph 3-ph
Motor
LC•K06, LP•K06 HP 0.5 1 1.5 3 3 3
Utilization in category AC-3 ratings
Squirrel cage motors Motor
LC•K09, LP•K09 HP 0.5 1.5 2 3 5 5
ratings
Motor
LC•K12, LP•K12 HP 1 2 3 3 7.5 10
ratings
LC•K16, LP•K16 Not for North American Applications. Not UL Listed or CSA Certified.
62
Control Circuit Characteristics

Type LP4 LP5
Rated control circuit voltage (Vc) V DC 12 to 72
Control voltage limits For operation 0.7 to 1.30 Vc

(≤ 50 °C [122 °F]) single-voltage coil For drop-out ≥ 0.10 Vc
Inrush W 1.8
Average consumption at 20 °C (68 °F) and at Vc
Sealed W 1.8
Heat dissipation W 1.8
Between coil energization and:
ms 25 to 35
- opening of the N/C contacts
ms 30 to 40
- closing of the N/O contacts
Operating time at 20 °C (68 °F) and at Vc
Between coil de-energization and:
ms 10 to 20
- opening of the N/O contacts
ms 15 to 25
- closing of the N/C contacts
Maximum immunity to micro breaks ms 2
Maximum operating rate In operating cycles per hour 3600
Mechanical durability at Vc In millions of operating cycles Wide range DC coil 30 5
63
Auxiliary Contact Characteristics of Contactors and Instantaneous Contact Blocks

On LP4, LP5K 1
Number of contacts
On LA1K 2 max.
Rated operational voltage (Ve) Up to V 690
Conforming to BS 5424 V 690
Conforming to VDE 0110 group C V 750
Conforming to CSA 22.2 No. 14, UL 508 V 600
Conventional rated thermal current (lth) For ambient temperature ≤ 50 °C (122 °F) A 10
Frequency of operational current Hz Up to 400
V min (DIN 19 240) V 17 (reliability <10-8 at 24V)
Minimum switching capacity
I min mA 5
Short-circuit protection Conforming to IEC 60947 and VDE 0660, gl fuse A 10
Rated making capacity Conforming to IEC 60947 I rms A 110
1s A 80
Overload current Permissible for 500 ms A 90
100 ms A 110
Insulation resistance MΩ > 10
Non-overlap distance Linked contacts conforming to INRS and BIA specs. mm 0.5
Operational power of contacts

AC supply, category AC-15 DC supply, category DC-13
conforming to IEC 60947
Electrical durability (valid up to 3600 operating cycles Electrical durability (valid up to 1200 operating cycles
per hour) on an inductive load such as the coil of an per hour) on an inductive load such as the coil of an
electromagnet: making current (power factor 0.7) = 10 electromagnet, without economy resistor, the time
times the breaking current (power factor 0.4). constant increasing with the load.
110/ 220/ 380/ 600/
V 24 48 400 V 24 48 110 220 440 600
127 230 400 690
1 million operating cycles VA 48 96 240 440 800 880 1200 W 120 80 60 52 51 50
Occasional making capacity VA 1000 2050 5000 10000 14000 13000 9000 W 720 600 400 300 230 200
Power in broken VA Power in broken W
16 000
1000
Time constant
10 000 4
8000
700
maximum of 50 operating cycles at 10 5000
1 500
in ms
4000
s intervals (breaking current = making 3
3000 300
current x power factor 0.7).
2000 200
250
2 Electrical durability of contacts for:
- 1 million operating cycles (2a) 1000 4
200 100
800
- 3 million operating cycles (2b) 600 80 2a
-10 million operating cycles (2c). 500 60
400 140 50
40 2b
100 30
2a
maximum of 20 operating cycles at 10 200
20
s intervals with current passing for 0.5
s per operating cycle. 100
2b
2c
80 2c 50 10
60
4 Thermal limit. 8
40 6
24 48 110 220 380 500 20
120 440 690 V 12 24 48 110 220 440 600 V
64
Selection of Low-consumption Contactors for Motor Control
The table below shows three-pole contactors with low-consumption coils for DC control circuits. They
are compatible with programmable controller outputs, and incorporate an LED indicator. For wide-range
coils (0.7 to 1.3 Vc), a suppressor is fitted as standard (consumption is 1.8 W).
in the open, “ready-to-tighten” position.
For information on add-on auxiliary contact blocks and accessories, see page 69.
Three-pole Contactors with Low-consumption Coils for DC Control Circuits

Max. Catalog
Operational Weight
220 V 380 V 440/500 V Current, lb. (kg)
Current ◆▼
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V up to 440 V
120 V 240 V 208 V 240 V 480 V 600 V
1 – LP4K0610••• 0.52 (0.235)
Screw clamp
– 1 LP4K0601••• 0.52 (0.235)
Slip-on 1 x 0.25 in., or 1 – LP4K06107••• 0.52 (0.235)
2 x 0.11 in. – 1 LP4K06017••• 0.52 (0.235)
0.5 1 1.5 1.5 3 3 6 1.5 2.2 3 6
Solder pins for 1 – LP4K06105••• 0.265 (0.58)
printed circuit board – 1 LP4K06015••• 0.58 (0.265)
1 – LP4K06103••• 0.52 (0.235)
Spring terminals
– 1 LP4K06013••• 0.52 (0.235)
1 – LP4K0910••• 0.52 (0.235)
Screw clamp
– 1 LP4K0901••• 0.52 (0.235)
Slip-on 1 x 0.25 in., 1 – LP4K09107••• 0.52 (0.235)
or 2 x 0.11 in. – 1 LP4K09017••• 0.52 (0.235)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
1 – LP4K09103••• 0.52 (0.235)
Spring terminals
– 1 LP4K09013••• 0.52 (0.235)
1 – LP4K1210••• 0.52 (0.235)
Screw clamp
– 1 LP4K1201••• 0.52 (0.235)
Slip-on 1 x 0.25 in., 1 – LP4K12107••• 0.52 (0.235)
or 2 x 0.11 in. – 1 LP4K12017••• 0.52 (0.235)
4 (> 440)
1 2 3 3 7.5 10 12 3 5.5 12
5.5 (440) 1 – LP4K12105••• 0.58 (0.265)
Solder pins for
1 – LP4K12103••• 0.52 (0.235)
Spring terminals
– 1 LP4K12013••• 0.52 (0.235)
◆ Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office).
Coil Selection
Volts DC 12 24 48 72
Code JW3 BW3 EW3 SW3
LP4K06105•••
65
Selection of Low-consumption Reversing Contactors for Motor Control
The table below shows three-pole reversing contactors with low-consumption coils for DC control
circuits. They are compatible with programmable controller outputs, and incorporate an LED indicator
and mechanical interlock. For wide-range coils (0.7 to 1.3 Vc), a suppressor is fitted as standard
(consumption is 1.8 W).
electrical interlock; see page 72 for more information.
Three-pole Reversing Contactors with Low-consumption Coils for DC Control Circuits

Max. Catalog
Operational Weight
220 V 380 V 440/500 V Current, lb. (kg)
Current ◆▼
115/ 230/ 200/ 220/ 460/ 575/ 230 V 415 V 660/690 V up to 440 V
120 V 240 V 208 V 240 V 480 V 600 V
1 – LP5K0610••• 1.08 (0.490)
Screw clamp ▲
– 1 LP5K0601••• 1.08 (0.490)
Slip-on 1 x 0.25 in., or 1 – LP5K06107••• 1.03 (0.470)
2 x 0.11 in. – 1 LP5K06017••• 1.03 (0.470)
0.5 1 1.5 1.5 3 3 6 1.5 2.2 3 6
1 – LP5K06103••• 1.08 (0.490)
Spring terminals
– 1 LP5K06013••• 1.08 (0.490)
1 – LP5K0910••• 1.08 (0.490)
Screw clamp ▲
– 1 LP5K0901••• 1.08 (0.490)
Slip-on 1 x 0.25 in., 1 – LP5K09107••• 1.03 (0.470)
or 2 x 0.11 in. – 1 LP5K09017••• 1.03 (0.470)
0.5 1.5 2 3 5 5 9 2.2 4 4 9
1 – LP5K09103••• 1.08 (0.490)
Spring terminals
– 1 LP5K09013••• 1.08 (0.490)
1 – LP5K1210••• 1.08 (0.490)
Screw clamp ▲
– 1 LP5K1201••• 1.08 (0.490)
Slip-on 1 x 0.25 in., 1 – LP5K12107••• 1.03 (0.470)
or 2 x 0.11 in. – 1 LP5K12017••• 1.03 (0.470)
4 (> 440)
1 2 3 3 7.5 10 12 3 5.5 12
5.5 (440) 1 – LP5K12105••• 1.17 (0.530)
Solder pins for
1 – LP5K12103••• 1.08 (0.490)
Spring terminals
– 1 LP5K12013••• 1.08 (0.490)
◆ Standard control circuit voltages (variable delivery times, please consult your Local Square D Field Sales Office.).
Coil Selection
Volts DC 12 24 48 72
LP5K06105•••
66
Selection of Low-consumption Contactors for Resistive Loads
Three- and Four-pole Contactors with Low-consumption Coils for DC Control Circuits
The table below shows three- and four-pole contactors with low-consumption coils for DC control
circuits. They are compatible with programmable controller outputs, and incorporate an LED indicator.
For wide-range coils (0.7 to 1.3 Vc), a suppressor is fitted as standard (consumption is 1.8 W).
in the open, “ready-to-tighten” position. For information on add-on auxiliary contact blocks and
accessories, see page 69.
Power Poles Auxiliary Contacts

Non-inductive loads
Maximum current at Weight
Type of Connection Number
≤ 50 °C (122 °F) lb. (kg)
◆▼
LP4K090047••
A N/O N/C N/O N/C
1 – LP4K0910••• 0.52 (0.235)
3 –
– 1 LP4K0901••• 0.52 (0.235)
Screw clamp
4 – – – LP4K09004••• 0.52 (0.235)
2 2 – – LP4K09008••• 0.52 (0.235)
1 – LP4K09107••• 0.52 (0.235)
3 –
Slip-on 1 x 0.25 in. or – 1 LP4K09017••• 0.52 (0.235)
2 x 0.11 in. 4 – – – LP4K090047••• 0.52 (0.235)
2 2 – – LP4K090087••• 0.52 (0.235)
20
1 – LP4K09105••• 0.58 (0.265)
3 –
Solder pins for printed – 1 LP4K09015••• 0.58 (0.265)
circuit board 4 – – – LP4K090045••• 0.58 (0.265)
2 2 – – LP4K090085••• 0.58 (0.265)
1 – LP4K09103••• 0.52 (0.235)
3 –
– 1 LP4K09013••• 0.52 (0.235)
Spring terminals
4 – – – LP4K090043••• 0.52 (0.235)
2 – – – LP4K090083••• 0.52 (0.235)
Coil Selection
Volts DC 12 24 48 72
67
Selection of Low-consumption Contactors for Resistive Loads
Three- and Four-pole Reversing Contactors with Low-consumption Coils for DC Control Circuits
The table below shows three- and four-pole contactors with low-consumption coils for DC control
circuits. They are compatible with programmable controller outputs, and incorporate an LED indicator
and mechanical interlock. For wide-range coils (0.7 to 1.3 Vc), a suppressor is fitted as standard
(consumption is 1.8 W).
LP5K0910••• The contactors mount on 35 mm DIN rails or with 4 mm (# 6) screws. The wire termination screws are
electrical interlock; see page 72 for more information.
Power Poles Auxiliary Contacts

Non-inductive loads
Maximum current at Weight
Type of Connection Number
≤ 50 °C (122 °F) ◆▼
lb. (kg)
A N/O N/C N/O N/C

3 – 1 – LP5K0910••• ■ 1.08 (0.490)
Screw clamp 3 – – 1 LP5K0901••• ■ 1.08 (0.490)
4 – – – LP5K09004••• 1.08 (0.490)
3 – 1 – LP5K09107••• 1.03 (0.470)
Slip-on 1 x 0.25 in.
3 – – 1 LP5K09017••• 1.03 (0.470)
or 2 x 0.11 in.
4 – – – LP5K090047••• 1.17 (0.530)
20
3 – 1 – LP5K09105••• 1.17 (0.530)
Solder pins for printed
3 – – 1 LP5K09015••• 1.17 (0.530)
circuit board
4 – – – LP5K090045••• 1.17 (0.530)
3 – 1 – LP5K09103••• 1.08 (0.490)
Spring terminals 3 – – 1 LP5K09013••• 1.08 (0.490)
4 – – – LP5K090043••• 1.08 (0.490)
■ WARNING: These reversing contactors are pre-wired for reverse motor operation
Coil Selection
Volts DC 12 24 48 72
68
Selection of Auxiliary Contacts and Accessories for Low-consumption Contactors
Instantaneous Auxiliary Contact Blocks (clip-on front mounting, 1 block per contactor)
Auxiliary Contacts
Type of Connection Type of Contactor Catalog Number Weight lb. (kg)
N/O N/C
2 – LA1KN20 0.10 (0.045)
Screw clamp 3- or 4-pole – 2 LA1KN02 0.10 (0.045)
1 1 LA1KN11 0.10 (0.045)
LP1KN•• 2 – LA1KN207 0.10 (0.045)
Slip-on 1 x 0.25 in. or 2 x 0.11 in. 3- or 4-pole – 2 LA1KN027 0.10 (0.045)
1 1 LA1KN117 0.10 (0.045)
2 – LA1KN203 0.10 (0.045)
Spring terminals 3- or 4-pole – 2 LA1KN023 0.10 (0.045)
1 1 LA1KN113 0.10 (0.045)
With terminal referencing conforming to EN 50012
– 2 LA1KN02M 0.10 (0.045)
3-pole, 6 and 9 A
Screw clamp 1 1 LA1KN11M 0.10 (0.045)
4-pole, 9 A 1 1 LA1KN11P 0.10 (0.045)
Electronic Time-delay Auxiliary Contact Blocks

– Relay output, with common point changeover contact, AC or DC 240 V, 2 A maximum.
– Control voltage: 0.85 to 1.1 Vc.
– Maximum switching capacity: 250 VA or 150 W.
– Operating temperature: -10 to + 60 °C (14 to 140 °F).
– Reset time: 1.5 s during the time-delay period, 0.5 s after the time delay period.
Clip-on front mounting, 1 block per contactor
Auxiliary
Contacts
Voltage Timing Range
Type Catalog Number Weight lb. (kg)
LA1KT2• V s SPDT
AC or DC 24 to 48 On-delay 1 to 30 1 LA2KT2E 0.09 (0.040)
AC 110 to 240 On-delay 1 to 30 1 LA2KT2U 0.09 (0.040)
Mounting and Marking Accessories

Description Application Sold in lots of Unit Catalog No. Weight lb. (kg)
Mounting plates For mounting on 1 rail Clip-on 1 LA9D973 0.05 (0.025)

(order 1 for a contactor; 110/120 mm mounting
order 2 for a reversing contactor) For mounting on 2 rails 10 DX1AP25 0.14 (0.065)
centers
Marker holder Clip-on On to front of contactor 100 LA9D90 0.002 (0.001)
25 AB1R• ▲ 0.004 (0.002)
numbers 0 to 9
Clip-in markers 4 maximum per contactor
25 AB1G• ▲ 0.004 (0.002)
capital letters A to Z
35mm " DIN rail (7.5 mm deep x 2 m long) 10 AM1DP200 2.88 (1.310)
35mm " DIN rail (15 mm deep x 2 m long) 10 AM1ED200 1.44 (0.650)
▲ Complete the catalog number by replacing the • with the required character.
DX1AP25
Cabling Accessories
Description Application Sold in lots of Unit Catalog No. Weight lb. (kg)
With screw clamp
For 2-poles 4 LA9E01 0.02 (0.010)
terminals
Paralleling links
With screw clamp
For 4-poles 2 LA9E02 0.03 (0.015)
terminals
For 3-pole reversing
For contactors with screw
Set of 6 power connections contactors for motor 100 LA9K0969 0.02 (0.010)
clamp terminals
control
For 4-pole changeover For contactors with screw
contactor pairs clamp terminals
LA9E01
69
Dimensions and Mounting of Low-consumption Contactors
XXXXX
Contactors
LP4K
LA1 K 0.16 (#6) screws

4mm
2.28
58
2.28
1.97
50
58
2.24 1.78
57 45
1.22 2.24 = =
=
1.38
31 57 35
1.78
45
On one asymmetrical rail DZ5MB with clip-on mounting plate

LA9D973 DX1AP25
0.20
DZ5 ME5
5
1.97
50
4.72
120
4.33
110
0.83 = =
0.20
2.24 1.38
5
57 21 35
1.78
45
2.24 1.06 1.78

On printed circuit board 57 27 45
0.34 == = A1
8.65
2.28
1.97
2.09
58
50
53
10xØ 0.05 1.78 A2

1.3 45

LA2KT On contactor
LA2 KT
2.28
1.06
58
27
1.34 1.50
34 38 2.24
Dimensions inches
1.34 mm
34 57
70
Dimensions and Mounting of Low-consumption Reversing Contactors
Reversing contactors LP5K

LA1K 0.16 (#6) screws

4 mm
2.28
58
2.28
1.97
58
50
2.24 3.54
57 90
1.22 2.24 = 3.15 =
=
31 57 80
3.54
90
On one asymmetrical rail DZ5MB with 2 clip-on mounting plates LA9D973 or on 2 mounting plates DX1AP25.
2 x LA9D973 2 x DX1AP25
0.20
1.78
5
45
1.97 DZ5 ME5
50
4.33
110
4.72
120
2.24 0.83 = 1.38 =
0.20
5
57 21 35
3.54
90
2.24 1.06 3.54
On printed circuit board for reversing contactors or 2 contactors mounted side by side 57 27 90
0.34 == = = == 0.34
8.65 8.65
A1 A1
1.97
2.09
2.28
50
53
58
A2 A2
20xØ1.3 1.78 1.78

0.05 45 45

LA2KT On reversing contactors
LA2 KT
2.28
1.06
58
27
1.34 1.50
34 38 1.34 2.24 Dimensions inches
34 57 mm
71
Type LP•K Schematics
Type LP•K Three-pole Low-consumption Contactors, Reversing Contactors, and Accessories

LP4K LP4K
3/L2
5/L3
1/L1
13/NO
3/L2
5/L3
1/L1
+A1
21/NC
A1
A1
A2
14
A2
22
T3/6
T1/2
T2/4
T3/6
T1/2
T2/4
-A2
3-pole reversing contactors Dashed lines indicate suggested customer wiring to Integrated-coil suppression device
LP5K electrically interlock coils LC5K
With screw clamp terminals
+A1
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
13/NO
13/NO
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
A1
A1
21/NC
21/NC
A1
A1
A2
A2
14
14
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
A2
A2
22
22
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
-A2
With Slip-on connectors or solder pins for printed circuit boards
3-pole + N/O 3-pole + N/O
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
5/L3
3/L2
3/L2
5/L3
1/L1
1/L1
13/NO
21/NC
13/NO
21/NC
A1
A1
A1
A1
A2
A2
A2
A2
22
22
14
14
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
T3/6
T3/6
T1/2
T2/4
T1/2
T2/4
Instantaneous auxiliary contact blocks

LA1K
For 3-pole contactors Terminal referencing conforming to standard EN 50012
2 N/O 2 N/C 1 N/O + 1 N/C 2 N/C 1 N/O + 1 N/C
LA1KN20 LA1KN02 LA1KN11 LA1KN02 LA1KN11M
53/NO
63/NO
51/NC
61/NC
53/NO
61/NC
33/NO
21/NC
21/NC
31/NC
52
62
54
64
62
54
22
22
34
32

LA2KT
For 3-pole contactors LP•K
1 C/O
A1
16
18
15
A2
72
Type LP•K Schematics
Type LP•K Four-pole Low-consumption Contactors, Reversing Contactors, and Accessories

LP4K LP4K
4-pole + N/O 2-pole N/O + 2-pole N/C
+A1
3/L2
5/L3
7/L4
1/L1
R1
R3
1
3
A1
A1
A2
A2
T3/6
T4/8
T1/2
T2/4
4
R2
R4
2
-A2
4-pole reversing contactors Integrated-coil suppression device
LP5K LP5K
With screw clamp terminals With slip-on terminals or solder pins for printed circuits boards
+A1
5
7
3
7
1
1
1/L1
1/L2
1/L3
1N
2/L1
2/L2
2/L3
2N
A1
A1
A2
A2
5
7
3
5
1
1
A1
A1
8
2
4
A2
A2
6
8
2
-A2
L1
L2
L3
Instantaneous auxiliary contact blocks

LA1K
2 N/O 2 N/C 1 N/O + 1 N/C Terminal referencing conforming to standard EN 50012
LA1KN20 LA1KN02 LA1KN11 1 N/O + 1 N/C
LA1KN207 LA1KN027 LA1KN117 LA1KN11P
53/NO
63/NO
51/NC
61/NC
53/NO
61/NC
13/NO
21/NC
52
62
54
64
62
54
14
22

LA2KT
For 3-pole contactors LP•K
1 C/O
A1
16
18
15
A2
73
74

Kline

Uploaded by

Copyright:

Available Formats

Kline

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Kline

Uploaded by

Copyright:

Available Formats

K-line Mini-contactors,

Conforming to VDE 0110 gr C V 750

Conforming to CSA 22-2 No. 14, UL 508 V 600

Rated impulse withstand voltage (Vimp) kV 8

Meets the essential requirements

Ambient air temperature Storage - 50° to + 80°C (-58° to +176°F)

Vertical axis Horizontal axis

Conforming to UL 94 Self-extinguishing material V1

Shock resistance Contactor open 10 gn

Vibration resistance Contactor open 2 gn

Cabling Min Max Max to IEC 60947

Solid or stranded cable AWG 1 x 18 2 x 14 or 1 x 12 —

Solid cable mm2 1 x 1.5 2x4 1 x 4 + 1 x 2.5

Slip-on connectors Clip 2 x 2.8mm or 1 x 6.35mm (2 x 0.110 in. or 1 x 0.250 in.)

Solder pins for With locating device between power

◆ Safety extra low voltage.

Rated operational frequency 50/60 Hz

Frequency limits of the

Rated operational voltage (Ve) 690 Vac

I rms conforming to NF C 63-110 and IEC 60947

Conforming to NF C 63-110 and IEC 60947 220/ 380/ 660/

LC•K12, LP•K12 – – – 110 A 80 A 70 A

In free air for a time "t” from cold state ≥ 15

LC•K12, LP•K12 LC•K16 115 A 105 A 100 A 75 A 55 A 50 A 25 A

By circuit breaker Select in accordance with NEC and local codes

Average impedance/pole At Ith and 50 Hz 3 mΩ

Maximum rated operational current for a

Maximum rated operational current for a

On-load factor 90% 60% 30%

Rated operational current limits in relation to 300 op. cycles/hour 13 A 15 A 18 A

Apply the following coefficients to the current values given

3 poles in parallel: K = 2.25

4 poles in parallel: K = 2.80

220/ 220/ 460/ 575/

LC•K12, LP•K12 Motor ratings 1 HP 2 HP 3 HP 3 HP 7.5 HP 10 HP

LC•K16, LP•K16 Not UL Listed or CSA Certified.

Control Circuit Characteristics

Heat dissipation 1.3 3 3

Between coil energization and:

- opening of the N/C contacts 5 to 15 ms 25 to 35 ms 25 to 35 ms

- closing of the N/O contacts 10 to 20 ms 30 to 40 ms 30 to 40 ms

- opening of the N/O contacts 10 to 20 ms 30 ms 10 ms

- closing of the N/C contacts 15 to 25 ms 40 ms 15 ms

Maximum immunity to micro-breaks 2 ms 2 ms 2 ms

Mechanical durability at Vc 50/60 Hz coil 10 5 10 5 – –

Rated operational voltage (Ve) Up to 690 Vac

Conforming to BS 5424 690 Vac

Conforming to IEC 60947 690 Vac

Conforming to CSA C 22.2 No.14, UL 508 600 Vac

Conventional thermal current (lth) For ambient temperature ≤ 50 °C (122 °F) 10 A

Frequency of operational current Up to 400 Hz

V min (DIN 19 240) 17 Vac

Short-circuit protection Conforming to IEC 60947 and VDE 0660, gl fuse 10 A

Rated making capacity Conforming to IEC 60947 I rms 110 A

Overload current Permissible for 500 ms 90 A

Insulation resistance > 10 mΩ

Operational power of contacts AC supply, category AC-15 DC supply, category DC-13

110/ 220/ 600/

1 million operating cycles VA 48 96 240 440 880 1200 W 120 80 60 52 51 50