Scribd
Upload
135 views3 pages

What Is An Inverter?

An inverter is an electrical device that converts direct current (DC) to alternating current (AC). It allows appliances that require AC power to run on DC sources like solar panels or car batteries. There are several types of inverters including half-bridge, full-bridge, and three-phase varieties. Inverters are used in applications ranging from small electronics to large solar power systems and uninterruptible power supplies. They allow AC-powered devices to operate in situations where only a DC source is available.

Uploaded by

Sumon Shariar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
135 views3 pages

What Is An Inverter?

An inverter is an electrical device that converts direct current (DC) to alternating current (AC). It allows appliances that require AC power to run on DC sources like solar panels or car batteries. There are several types of inverters including half-bridge, full-bridge, and three-phase varieties. Inverters are used in applications ranging from small electronics to large solar power systems and uninterruptible power supplies. They allow AC-powered devices to operate in situations where only a DC source is available.

Uploaded by

Sumon Shariar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Inverter

The power conversion from direct current to alternate current was accomplished in the middle of 19th to 20th
century with the help of MG sets (motor generator sets) and rotary converters. In the early 20th century, gas-filled
tubes, as well as vacuum tubes, were used as switches within inverter circuits. An inverter is an electrical device, and
it is capable of changing a DC current to an AC current at a given frequency as well as voltage. For instance, if we
want to provide power supply to home appliances then it will use 230V AC. In some cases, when the AC power is not
available then power supply can be provided to the home appliances through a 12V inverter. Inverters are applicable
for PV systems to provide the supply to the electrical devices in mountain huts, isolated houses, boats, camper vans,
etc.

What is an Inverter?

An inverter can be defined as it is a compact and rectangular shaped electrical equipment used to convert direct
current (DC) voltage to alternating current (AC) voltage in common appliances. The applications of DC involves
several small types of equipment like solar power systems. Direct current is used in many of the small electrical
equipment such as solar power systems, power batteries, power-sources, fuel cells because these are simply
produced direct current.

The basic role of an inverter is to change DC power into AC power. The AC power can be supplied to homes, and
industries using the public utility otherwise power grid, the alternating-power systems of the batteries can store only
DC power. In addition, almost all the household appliances, as well as other electrical equipment can be functioned
by depending on AC power.

In some cases, generally, the input voltage is lesser whenever the output voltage is equivalent to the grid supply
voltage of either 120 V otherwise 240 V based on the country. These devices are standalone devices for some
applications like solar power. There are different types of inverters available in the market based on the switching
waveform shape. An inverter uses DC power sources to provide an AC voltage to giving the supply to the electronic
as well as electrical equipment.

Working of Inverter

The working of an inverter is, it converts DC to AC, and these devices never generate any kind of power because the
power is generated by the DC source. In some situations like when the DC voltage is low then we cannot use the low
DC voltage in a home appliance. So due to this reason, an inverter can be used whenever we utilize solar power
panel.

Types of Inverters

Inverters are classified into two type’s namely single phase and three phases
Single Phase Inverter

Single phase inverters are classified into two types namely half-bridge inverter & full bridge inverter

Half Bridge Inverter

The half-bridge inverter is an essential building block in the full bridge inverter. It can be built with two switches
where each one of its capacitors includes an o/p voltage which is equivalent to Vdc2. Additionally, the switches
balance each other, if one switch is activated then automatically another switch will deactivate.

Full Bridge Inverter

The full bridge inverter circuit converts direct current to alternate current. It can be achieved by opening as well as
closing the switches within the correct series. This type of inverter has dissimilar operating states which depend on
closed switches.

Three Phase Inverter

A three-phase inverter is used to alter an input DC to a 3-phase output AC. Generally, its 3-arms are deferred with
120° of an angle to produce a 3-phase AC supply. The inverter control which has a 50% of the ratio as well as
controlling can take place after every T/6 of the time T. The switches used in the inverter complement each other.

The 3-single phase inverters place across the similar DC source, and the pole voltages within a 3-phase inverter are
equivalent to the pole voltages within 1-phase half-bridge inverter. These inverters have two conduction modes such
as 120°-mode of conduction & 180° mode of conduction.

Inverter Circuit Diagram

There are many basic electrical circuits for the power devices, a transformer, and switching devices. The DC
alteration to an AC can be attained by stored energy within the DC source like the battery. The entire process can be
done with the help of switching devices which are constantly turned ON & OFF, and then stepping-up with the
transformer.

The input DC voltage can be turned ON/OFF by using power devices like MOSFETs otherwise power transistors. The
changing voltage within the primary makes an alternating voltage at resultant winding. The working of the
transformer is equivalent to an amplifier where the output can be increased from the voltage supply by the batteries
to 120 V otherwise 240 V.
There are three frequently used inverter o/p stages are, a push-pull by center tap transformer, push-pull by half-
bridge, and push-pull by the full bridge. This is most popular because of its ease and, definite results; but, it employs
a huge transformer with lower efficiency. An easy push-pull direct current to an alternating current inverter by
center tap transformer circuit can be shown in the below figure.

Applications of Inverter

These are used in a variety of applications like tiny car adapters to the office, household applications, as well as
large-grid systems.

 Inverters can be used as an UPS-Uninterruptible power supplies


 These can be used as standalone inverters
 These can be used in solar power systems
 An inverter is the basic building block of an SMPS- switched mode power supply.
 These can be used in Centrifugal fans, pumps, mixers, extruders, test stands. conveyors, metering pumps.
and Web-handling equipment.

Thus, this is all about an overview of inverters. From the above information finally, we can conclude that the
applications of inverters range from uninterrupted power supplies to electric motor’s speed controllers. The name
inverter also refers to a group of rectifier inverter, which is stimulated by AC & used for changing the voltage as well
as the frequency of o/p AC.

You might also like