Scribd
Upload
95 views

F-QC-01 Schedule For QC Check

This two-page document outlines Mechtek Laboratory's quality control check plan and schedule for the year. It lists various measurement instruments like calipers, micrometers, and gauges that will undergo calibration checks on a monthly basis according to specified procedures. The acceptance criteria and results of the quality control checks will be recorded. The plan was prepared by the technical manager and approved by the director.

Uploaded by

Mechtek Lab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
95 views

F-QC-01 Schedule For QC Check

This two-page document outlines Mechtek Laboratory's quality control check plan and schedule for the year. It lists various measurement instruments like calipers, micrometers, and gauges that will undergo calibration checks on a monthly basis according to specified procedures. The acceptance criteria and results of the quality control checks will be recorded. The plan was prepared by the technical manager and approved by the director.

Uploaded by

Mechtek Lab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Document No.

F/QC/01
Page 1 of 2
MECHTEK LABORATORY PLAN / SCHEDULE FOR QUALITY CONTROL CHECK
Issue No. 01 Rev. No. 00
Issue Date 01-08-19 Rev. Date ===

For the Year: ..DD-MM-YYYY to DD-MM-YYYY..

Particulars of QC check Reference


Q.C. Check Acceptance
Sr. Calibration (Recalibration by Alternet Competent Person as per F/HRD/09) Job No. & Result of QC
DUC Range Performed Deviation in
No. procedure Inst. ID. Check
by %
No.
Jan Feb Mar. April May Jun July Aug Sep Oct Nov Dec.

15
CALIPER MAX. SOP NO

15
DEPTH VERNIER

15
HEIGHT GAUGE

15
EXTERNAL
MICROMETER
15
DEPTH
MICROMETER
15
PLUNGER DIAL

15
LEVER DIAL

15
BORE GAUGE

15
Pin Gauge

15

Description Prepared By Reviewed & Approved By


Designation Technical Manager Director

Signature
Document No. F/QC/01
Page 2 of 2
MECHTEK LABORATORY PLAN / SCHEDULE FOR QUALITY CONTROL CHECK
Issue No. 01 Rev. No. 00
Issue Date 01-08-19 Rev. Date ===

PLAIN PLUG
GAUGE
15
DIAL THICKNESS
GAUGE
15
THREAD PLUG
GAUGE
15
TAPER THREAD
PLUG GAUGE
15
PRESSURE
GAUGE
15
PRESSURE
GAUGE
15
PROFILE
PROJECTOR

Description Prepared By Reviewed & Approved By


Designation Technical Manager Director

Signature

You might also like